Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criterias
• Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.
• Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.
• Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.
• In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines
• Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

Requirements:

• Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 3 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

T&C Engineer/

Senior Commissioning Engineer

The T&C Engineer/Commissioning Engineer is responsible for managing all testing and documentation for the project, ensuring quality delivery, and coordinating handover to the client and internal service department.

Key Responsibilities:

• Project Management:Manage all testing processes and documentation for the project.
  Ensure quality delivery from project installations and coordinate handovers.
  
• Design Review:Review project designs to ensure operational feasibility.
  Verify and evaluate the quality and performance of equipment/systems according to specifications before delivery to the client.
  
• Early Project Involvement:Engage in the early stages of projects to understand construction and Testing & Commissioning (T&C) requirements.
  
• Compliance:Ensure compliance with standards and engineering practices throughout the project.
  Understand built plans (M&E), technical literature, and equipment manuals.
  
• Troubleshooting:Conduct equipment troubleshooting, root cause analysis, and propose solutions.
  
• Reporting:Report work issues and non-compliances to the Project Management Office (PMO).
  
• Testing Activities:Conduct Site Acceptance Tests (SAT), Integrated System Tests (IST), Testing and Commissioning (T&C), and User Acceptance Testing (UAT).
  Support the project team with any technical issues related to testing procedures.
  
• Coordination:Work closely with the engineering team to understand design specifications.
  Prepare T&C test sheets and documentation prior to inspections.
  Schedule and coordinate all T&C activities, including attending equipment SAT testing and submitting site inspection reports.
  Liaise with project T&C consultants on all matters and ensure reports are compiled and submitted after each inspection.
  
• Documentation:Compile, review, and submit all T&C Method of Statements (MOS) for consultant review and approval.
  
• Additional Duties:Perform any other duties assigned by the PMO.
  

Special Instructions:

• This role is primarily electrical-based.

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

• Responsible for QC inspection of electronic parts, PCB, PCBA, cable, assembly, mechanical parts and finished goods.
• Prepare inspection reports for accepted parts and produce discrepancy reports for rejected parts.
• Ensure that the product meets specifications in terms of its appearance and its functions.
• Use various inspection techniques and methods such as visual inspections, measurements and functional testing to determine product quality standards.

Requirements:

• GCE N level or equivalent
• At least 2 years of QC experience
• Good knowledge in mechanical parts, PCB, PCBA, cable assemblies and electronics components.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Supports team task to support laboratory operation and infrastructure in the areas of examples: Equipment, Data Systems, Method) needs
• Participates in the management of laboratory equipment and computerized systems in QC laboratory to ensure business continuity and system data maintenance e.g., Empower, LIMS, SAP and equipment maintenance/calibration is in a state of compliance
• Participates in method technology transfer and laboratory equipment technological refresh/introduction activities into QC Laboratory within project timeline
• Participates in QC laboratory long range planning to ensure laboratory infrastructure needs is secured and Data integrity plan is in place to support business and laboratory compliance
• Author and execute qualification and equipment qualification documentation / method transfer (E.g.: Reports, Protocol, change control, related quality documents or procedures) are in cGMP compliance to corporate/site or regulatory requirements
• Supports and ensure timely escalation/handling of lab events or related quality actions. (E.g.: NCR, Lab Investigation, CAPA)
• Supports preparation and participate in internal/external audit, audit responses, to enable a successful audit outcome
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable. Lead/supports CI initiatives to enable laboratory performance metrics
• Carry out any other task as assigned by Line manager

About You:

• University Degree in Science related discipline (E.g.: Chemistry, biology, pharmaceutical sciences, or equivalent experiences)
• Minimum 1 - 3 years of pharmaceutical experience in a Quality Control Function
• Experienced in Regulatory/ Pharmaceutical requirements
• Analytical thinking with basic problem solving and writing skills
• Motivated and independent
• Basic GMP knowledge/Experience on QC Lab Equipment and Method transfer
• Good communication skills and Strong ability to work cross functional teams
• Ability to work towards timeline
• Based in Tuas

Job Type: Contract

Contract length: 12 months. Option to extend/convert subject to performance review.

Responsibilities:

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programmes
• Prepare baseline schedule which includes resources, cost loadings, S-curves, Programme Narratives, and scope appreciation presentation
• Work on progress forecast and prepare rolling programmes
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure timely submission of materials with approvals
• Ensure project orders and deliveries are in accordance to agreed schedules
• Assist in the overall interfacing and coordination works as and when required

Requirements

• Degree in Civil / Structural Engineering recognized by Professional Engineers Board (PEB) Singapore or Building and Construction Authority (BCA)
• Good understanding of construction industry practices and standards to perform planning and scheduling
• Experience in LTA programme preparation, programme requirements and submissions
• At least 3 years’ experience in large scale projects with hands on experience doing planning and scheduling for civil and building projects
• Candidate with more experience will be considered for a senior role
• Proficient in planning software such as Primavera P6 and Microsoft Project
• Candidate with 4D BIM knowledge will have an added advantage
• Highly motivated, self-driven with initiatives to work independently to produce programmes, narrative and histograms
• Meticulous, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

• Preferrably with experience in fire protection systems
• Drafting, drawings, Tender BQ
• Project management includes preparing, scheduling, coordinating, monitoring etc.
• Project administration, quotation, progress claim, PTW, SIC etc.
• Hardworking and independent, willing to learn
• Proficiency with MS Office & CAD
• Strong organizational and communication skills
• Strong ability to multitask
• Comfort working with multiple groups within business

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

NO experience is welcome to apply (Training will be provided)

Benefit:

• 5 days’ work week
• Aircon environment
• Transport Allowance + Attendant Allowance
• Confirmation raises

1. Production Operator

Key Responsibilities:

• To support daily production activity (such as Packing WIP goods, Top up machine oil, Clear off the rubbish, etc.)
• Receiving, Storing, Shipping, Packing and Palletizing of goods against quantity and description stated.
• Stock-take inventory.
• Loading and unloading the parts from the Degreasing Semi-Auto machine.
• Manage the warehouse and perform housekeeping.
• Participate in 5S activities.
• Any ad-hock job as assign by Supervisor.
• Opportunity to learn QC related knowledge.

Requirements:

• Candidate must possess at least Primary/Secondary School/"O" Level.
• Training will be provided for no experience
• Preferably Entry Level specialized in Manufacturing/Production Operations or equivalent.
• Must be a multi-task person and physically fit.

2. QC Inspector

Key Responsibilities:

• Perform inspection in accordance to work instructions trained to them.
• Complete all necessary records by them after each completion of their production work.
• Maintain work environment during and after performing their work.
• Report all problems & non-conformance encountered to their superiors for investigation & corrective action.
• Any ad-hock job as assign by Manager.
• Involve in new project activities such as but not limited to lay out inspection, checking of PPAP samples, MSA activity, preparation of master/limit samples and CPK evaluation.
• Participate in 5S activities.

Requirement/Skills:

• Experience working as QC inspector.
• Can interpret drawing/GD&T.
• Relevant ISO 9000 procedures, instruction and forms to use.
• With experience in using measuring instruments (CMM and Smart Scope).
• Willing to work in shifting schedule.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors to ensure daily inspection activities comply with established standards.
• Provide training, coaching, and mentoring to enhance team members' skills and performance.
• Develop and maintain work schedules for the department to optimize resource allocation and efficiency.
• Collaborate with cross-functional teams to drive continuous improvement, track non-conformities, and assess CAPA effectiveness.
• Review and approve Device History Records (DHR). Ensure quality records and samples are retained in accordance with Good Documentation Practices (GDP).
• Implement changes to quality documentation, such as QC procedures, process workflows, and work instructions, and guide the team through these changes.
• Review and submit validation or verification measurement reports.
• Perform daily process audits to ensure compliance with quality operational requirements.
• Ensure proper product identification and traceability.
• As the calibration administrator, ensure all equipment is properly calibrated and provides accurate measurements with appropriate identification.
• Assist with customer complaint analysis, investigate quality issues, and implement corrective actions.
• Authorize product release (Certificate of Conformance), and review and approve Certificates of Analysis (COA).
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment.
• Monitor and report on key performance indicators (KPIs) for QC team performance, production quality trends, and quality control charts.
• Perform any other tasks as assigned by management.

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Description

• Position: QA/QC Assistant
• Singapore's leading seafood processors, exporters and distributors
• Working hours: 5.5 days (Monday to Friday, 8am – 5.30pm; Saturday 8am – 12noon)
• Salary (commensurate with experience): up to $2,500 basic salary + yearly performance bonus
• Working Location: Jurong
• Meal Provided
• Outpatient Medical & Dental Benefits Provided
• Duration: Permanent
• Industry: Processing and preserving of seafood

Main Responsibilities:

• Responsible for day-to-day inspection of in-process and finished products.
• Conduct daily hygiene inspection of process workers, process rooms and related areas to ensure it meets required standards.
• Ensure proper records of product and hygiene inspections.
• Responsible for reporting any non-conformance of products/process/ hygiene violation in timely manner.
• Assist in guiding production leaders/operators in implementing corrective actions and continuous improvement in production area.
• Assist in product development and ensure proper maintenance of all data, documents and records relating to product development.
• Assist QA Executive in implementation/ maintenance of SFA, Halal, ISO22000 & HACCP certifications.
• Assist QA Executive for Quality-related matters.

Requirements:

• Minimum Diploma in Food Science/microbiology.
• Preferably at least 1 year experience as QC in Food Manufacturing industry.
• Understanding of ISO 22000/ HACCP/GMP/ Halal requirements is advantageous.
• Meticulous, positive working attitude, able to cooperate/ communicate with all level of employee.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Salary: up to $2600
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Life Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Salary: up to $2400 + 400 transport allowance

Duration: 1 year contract

Working Days & Hours: five day week. 2 weeks of Morning followed by 1 week of afternoon

Location: Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Job Description:

Monitor Product Quality Compliance

Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc

• Identify OOS, deviations and quality problems

• Report testing activities and results

• Comply with Quality and HSE procedures when carrying out sampling and QC tests

Manage Laboratory Operations

• Follow the organization’s operational excellence model for laboratory work

• Perform routine calibration and maintenance of laboratory equipment

• Report equipment OOS issues and equipment purchase requests

• Maintain integrity, accuracy and completeness of QC data and records

Optimise quality and efficiency of department workflows and activities

• Assist in preparing and participate for laboratory inspections and audits

• Compile data to support business and performance metrics reporting

• Propose solutions to improve QC procedures, activities and workflows

• Gather information to support feasibility assessments of introducing new QC procedures, systems and equipment

Job Requirements: Min Diploma in Chemistry / Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Responsibilities and Authorities

• Continuously develop, implement and maintain the Company’s Quality Management System in accordance with the Authority’s standards.
• Manage office and project quality to ensure compliance to codes, standards, regulations, and QMS requirements.
• Coordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Implement preventive measure, corrective action, review and comments to ensure that all non-conformance issues are promptly investigated, corrective and preventive action are proposed and implemented.
• Maintain QAQC records and ensure all project documentation are kept in compliance with the QMS
• Prepare and establish the internal and external audit plan and conduct the audit for Singapore. (Including other regions like Malaysia and India)
• Ensure the company’s required authority certification timely renewal.
• Prepare and submit for the authority awards for the completed projects.
• Coordinate and facilitate regular meeting and management review.
• Support company development, update and maintain organizational chart regularly.

Job Specifications

• Diploma in engineering or equivalent.
• Min 5 years of working experience in the construction industry.

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Job Scope:

• Develop and maintain relationships with key clients and prospects.
• Identify customer needs and provide technical solutions that align with product offerings.
• Conduct product presentations and demonstrations to clients.
• Provide technical support and advice to customers during the sales process.
• Prepare and deliver detailed product proposals, quotations, and technical documentation.
• Collaborate with engineering and product teams to ensure customer requirements are met.
• Drive sales growth through direct sales activities and follow-ups.
• Negotiate terms and close sales agreements.
• Conduct market research to identify new business opportunities and market trends.
• Provide post-sales support and ensure customer satisfaction.
• Attend trade shows, conferences, and industry events to promote products and services.
• Track and report on sales performance, targets, and project progress.
• Ensure compliance with company sales policies, pricing strategies, and technical standards.
• Assist in the development of marketing materials and sales tools.

Requirements:

• Diploma/Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• No experience required, entry-level candidates welcome
• Passion for automation, creative and adaptive approach
• Good communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC programming, touch panels, control, and automation

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)
• Reports to Principal Welding and NDT Engineer

R1552011

Peak Ocean EA License No. 18C9336

WHO WE ARE:

PALO IT is a global innovation and software development company dedicated to helping organizations craft tech as a force for good. We work with clients to rapidly launch products and services, create new business models, and prepare leadership and culture for the future. We are a community of innovators, designers and technologists across 16 offices and five continents (France, Hong Kong, Singapore, Thailand, Australia, Mexico, Colombia, Spain and the United States).

We're committed to helping businesses transform to better our world. We're proud to be a World Economic Forum (WEF) New Champion, and a B Corp-certified company in Singapore, Hong Kong and Mexico, currently working towards certification across all other locations.

YOUR ROLE:

The Senior DevOps Engineer will maintain and support Cloud Infrastructure and apply DevOps practices and solutions. The person will also implement Cloud-related and DevOps technologies such as AWS/Azure/Kubernetes. Senior DevOps Engineer will be expected to conduct workshops with client to identify their challenges, come up with transformation roadmap and deliver technical solutions while coaching delivery teams on DevOps best practices.

YOUR RESPONSIBILITIES:

• Provide customers with reliable solutions
• Configure, maintain, and support the infrastructure both Cloud and On-Premises.
• Install, maintain, and support the various CI/CD, security and testing related tools
• Develop multi-stage CI/CD pipelines to enable faster and frequent releases to production; help delivery teams automate their build and deployment to cloud
• In some cases, act as a system administrator on different operating systems
• Document, and share knowledge on developed DevSecOps solutions
• Collaborate with clients and other PALO IT teams to understand client requirements, design comprehensive end-to-end approach, and implement DevOps solutions that meet client’s needs.

WHO YOU ARE:

• Strong Unix / Linux / Bash knowledge
• Deep understanding of cloud computing, e.g. technologies, deployment, costing, HA/DR, etc
• You should be able to coach delivery teams on DevOps principles, e.g. CI/CD, test automation, release automation etc. and engineering practices, e.g. TDD, BDD
• Well versed with at least one of the public, private or hybrid cloud platforms such as AWS, Azure, OpenShift, Google Cloud (GCP)
• Strong exposure on container technologies (eg: Docker, Podman, Kubernetes, AWS EKS, AKS, Openshift etc..)
• Hands-on experience with automation and infrastructure-as-code using various tools including Terraform, Pulumi, AWS CFN, ARM etc
• Experience with developing and implementing processes to handle releases from development to operations while respecting internal rules, and offering solutions for rollback etc
• Hand-on experience in designing , developing and migrating CI/CD pipelines (eg: Github Actions, Azure DevOps Pipelines etc..)
• You have a good understanding of microservice and event-driven architectures and DevSecOps practices which support relatively complex distributed systems
• Good understanding of monitoring and hands-on experience of setting up and configuring monitoring tools (e.g. ELK, Prometheus, Grafana and Splunk)
• Good to have strong RDBMS and NoSQL skill in deploying and fine-tuning such as MySQL, Oracle, Elasticsearch.
• Overall, 6-10 years of experience in platform automation, applying various DevOps principles.

MORE ABOUT PALO IT:

We’re eager to adapt to change, learn from our experiences and move to meet our planet’s urgent needs. With 2025 as our horizon, we are taking action to meet the following objectives:

• Become a climate net-zero company
• Attain 50% of revenue from projects with a positive impact
• Train 100% of our workforce on impact
• Achieve B Corp certification among all 16 of our offices across the globe
• Continuously measure & improve employee happiness

Our clients (https://www.palo-it.com/en/case-study) are amongst the world's most successful companies. We innovate with both established Fortune 1000s, SMEs and start-ups who aim to make an impact, become global leaders and address the world's most complex challenges.

WHAT WE OFFER:

• Stimulating working environments
• Unique career path
• International mobility
• Internal R&D projects
• Knowledge sharing
• Personalized training

For more on our team culture and benefits in Singapore, check out our careers page (https://www.palo-it.com/en-sg/careers)

PALO IT Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Palo IT SG does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Palo-IT.

Your personal data will be processed for the purposes of managing Palo-IT’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.palo-it.com/en/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Job Scope:

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements:

• Fresh Graduates are welcome
• Min Diploma in Construction related major.

• Design electrical systems for construction projects, including power distribution, lighting, and safety systems.
• Prepare detailed electrical drawings, specifications, and technical documents.
• Conduct load calculations and electrical system analysis to ensure efficiency and compliance with codes.
• Collaborate with architects and other engineers to integrate electrical systems into overall project designs.
• Review and approve electrical contractor submittals, shop drawings, and material samples.
• Conduct site inspections to monitor the progress of electrical installations and ensure compliance with specifications and standards.
• Troubleshoot and resolve electrical issues that arise during construction and commissioning phases.
• Ensure that all electrical systems are installed safely, efficiently, and in accordance with local codes and standards.
• Prepare progress reports and documentation for project management and stakeholders.