The Engineer/Supervisor (Operations and Maintenance) is responsible for ensuring the continuous operations of equipment, components and systems. He/She supervises the operations and maintenance of equipment and systems. He leads the initiatives for identifying and implementing innovation within the organisation. He also follows corporate guidelines and best practices, monitoring compliance of work activities to regulatory and statutory policies, procedures and regulations. He implements emergency response plans and adheres to workplace safety and health (WSH) requirements. He manages a team of technicians and contributes to the improvement of business operations.

He is a good team player and is adept in engaging and interacting with internal and external stakeholders. He is systematic and logical in his work approaches, possesses good analytical and problem-solving skills, and is able to work in a fast-paced environment. He is also expected to work on a rotating or day-shift, and/or may be employed on-call basis.

Key Tasks:

• Assign responsibilities and resources for inspection, testing, repair and predictive maintenance of equipment and systems

• Interface with procurement team and vendors to align lead time with planned maintenance work activities

• Recommend repair works and solutions to address equipment and system failures

• Conduct root cause analysis of equipment and system failures and malfunctions

• Analyse testing, maintenance and repair records to identify trends, potential malfunctions and solutions applied

• Outline housekeeping procedures and standards to be adhered to for maintenance and repair works

• Conduct test runs of new processes involving automated equipment, systems and controls

• Liaise with internal stakeholders on operations

• Determine resourcing requirements to achieve operational state in accordance with organisational standards

• Develop operational plans and Standard Operating Procedures (SOPs) for equipment and systems

• Devise methods of application for emerging technologies to improve performance monitoring and process troubleshooting

• Conduct root cause analysis of equipment and system underperformance

• Analyse the impact of emergency response plans and relevant safety procedures on operations

• Coordinate the emergency response team activities

• Ensure compliance with the organisational Workplace Safety and Health (WSH) policies and Environmental Management Systems (EMS)

• Ensure that contractors and vendors comply with the organisation's WSH and EMS standards and practices

• Conduct WSH and EMS accident and incident investigations

• Implement sustainable engineering procedures and guidelines

• Monitor resource availability to support business operations

• Monitor employee performance by utilising performance management systems

• Provide inputs on team's recruitment, training and development needs

• Ensure adherence to planned budgets and financial forecasts

• Implement risk management plans and risk controls within the team

• Propose improvements to business processes and operations to drive continuous improvement

• Perform other duties as required or assigned by Supervisor/Manager & Management

Responsibilities:

• Perform technology scouting relevant to innovations for ICT, consumer electronics and various smart devices. Prepare the technology insights reports in selected fields.
• Identify and evaluate new technological trends or business opportunities
• Cultivate partnerships and exchange with international innovation teams.
• Establish the partnership with universities, research institutes and startups. Support existing research collaboration relationships.
• Work in close collaboration and constant communication with peers. Assist with identifying collaborative projects partners, budgets and timelines. Provide guidance and advice on IPR and usage. Review agreements and lead the negotiation of business and IPR position for the collaboration projects in consultant with relevant stakeholders.
• Manage timelines and capacities to handle multiple tasks at a time.

Requirements:

• Computer Engineering or Science background. Master's Degree or PhD’ Degree.
• Excellent networking skills, both internal and external.
• Strong aptitude for working with a broad range of scientific and innovative disciplines.
• Strong willingness to learn and gain deeper competencies in various fields.
• Strong eagerness to translate insights into opportunities.
• Advanced creative, deductive and entrepreneurial thinking.
• Good Project Management skills.
• Conscientious, responsible, self-motivated.
• Ability to work independently as well as part of a team

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

• 5 days
• 9am-6pm
• Kallang, Near Bendemeer, Lavender and Kallang MRT
• $4000-$5000

Responsibilities:

• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents
• Provide technical documentation and training when required
• Product improvement

Requirements:

• Degree / Diploma in engineering discipline with minimum 1-3 years’ experience
• Knowledge in Vision/Optical Inspection system is required
• Experience in semiconductor devices manufacturing process and quality control
• Experience in semiconductor optical inspection equipment is beneficial
• Experience in any programming language (C++ or C# or Python) is a plus
• Ability to troubleshoot electronics / PC hardware system
• Knowledge in statistical data analysis is a plus
• Travelling will be required

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• 5 days
• 9am-6pm
• Kallang, Near Bendemeer, Lavender and Kallang MRT
• $4000-$6000

The role involves working within a multidisciplinary team to carry out Research & Development in Image Processing / Computer Vision Algorithm for automated optical inspection systems

Duties and Responsibilities:

• Design and develop software for automated Computer Vision Equipment
• Software development for GUI, big data management, multi-threaded programming
• Design & Develop Image Processing / Computer Vision Algorithm Development
• Involve in Software Development Life Cycle

Requirements:

• PHD / Masters / Degree in engineering discipline.
• Knowledge in programming skills in Visual Studio Development Environment
• Proficient in C++ is required
• Strong Knowledge in vision inspection / computer vision / image processing skill is
• required
• Knowledge in programming languages such as C# is an added advantage
• Knowledge in Deep Learning(AI) for Defect Classification is a plus

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Scope:

• Design and develop new products from concept to production
• Collaborate with cross-functional teams, including R&D, manufacturing, and marketing
• Conduct product testing and validation to ensure compliance with specifications and standards
• Analyze market trends and customer feedback to inform product improvements
• Create and maintain technical documentation, including specifications and manuals
• Support the manufacturing process by providing technical guidance and troubleshooting
• Participate in product lifecycle management, including updates and phase-out strategies
• Conduct cost analysis and optimize product designs for manufacturability
• Work closely with suppliers and vendors to ensure quality materials and components
• Assist in training sales and support teams on product features and benefits

Requirements:

• Degree or Diploma in Mechanical or Mechatronics Engineering
• Over 3 years of experience in setting up automation equipment
• Strong knowledge of electromechatronic systems
• Good problem-solving and analytical skills
• Ability to work independently and communicate effectively at all levels
• Team player with a high level of motivation
• Willingness to travel overseas for field support as needed
• Prepared to work overtime when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Job description:

• Managing project and dealing with labour, materials, & equipment
• Lowering wastage of material/equipment/ resources
• Liaise with subcontractors and performing project management to ensure that project progresses according to schedule and to take the appropriate corrective action when deviations arise.
• Coordinating with all related stakeholders to ensure project delivered on time
• Handling administration of contract, claims, disputes, variation and final accounts.
• Project planning & material requisition
• Project engineer experience
• Diploma/degree in engineering related course

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Our Client:

• IT Industry
• Aljunied
• Mon – Fri, 9am – 6pm
• UP $6,000 Basic + Commission + Phone Allowance

Job Description:

• Address technical business needs of partners and end users through presales support, including:

1. Presentations
2. Demos
3. Proof of Concept (POC)
4. Proposal writing
5. Compliance tables
6. Statements of Work (SOW)
7. Training/Product enablement

• Gain proficiency and certifications in assigned products through self-directed and formal training.
• Conduct independent hands-on POCs.
• Present vendor solutions to partners and end users.
• Provide updates and training to partners and end users as needed.
• Work closely with product managers and channel account managers to close opportunities.
• Ensure timely and accurate reporting.

Requirements:

• Min. Diploma in Information Technology or equivalent.
• Min 2 years of hands-on working experience in Cybersecurity Domain.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Deidrie Chiam Rui-Xuan | EA Reg No: R23116361

RS Recruitment Agency LLP | EA Lic No: 17C8809

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Job Description

• Design and perform calculations for mechanical engineering works, including HVAC, fire protection systems, and plumbing and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Prepare comprehensive study reports, design reports, technical notes, and public consultation papers
• Develop detailed tender documents and technical specifications for projects
• Evaluate tenders and prepare thorough tender assessment reports
• Collaborate with cross-functional teams to ensure project success and timely delivery
• Provide support in project management and contract administration for building engineering contracts
• Stay up-to-date with industry trends, technologies, and best practices to drive innovation in mechanical engineering solutions
• Ensure compliance with local building codes and regulations in Singapore

Requirements

• Bachelor's Degree in Mechanical Engineering from an accredited institution
• Minimum of 5 years of hands-on design experience in building and/or infrastructure projects
• Proficiency in CAD software, such as AutoCAD and SolidWorks
• Strong knowledge of industry standards, regulations, and local building codes in Singapore
• Excellent project management and technical skills
• Proven ability to work independently with minimal supervision and as part of a collaborative team
• Outstanding problem-solving and analytical skills
• Strong attention to detail and organizational abilities
• Excellent written and verbal communication skills
• Ability to manage multiple projects efficiently and meet deadlines
• Familiarity with sustainable design principles and energy-efficient systems is a plus

You will drive R&D initiatives to make our autonomous vehicles operate at superhuman capabilities for comfortable, safe driving. On a daily basis, you will:

• Define and influence the direction of the team, organization, and/or department
• Advise leaders on technology problems and solutions
• Connect and drive business impact through technology solutions
• Formulate problems, architect solutions, and design processes
• Prototype, evaluate, implement, and iterate on solutions
• Pioneer research into state of the art solutions and systems for autonomous vehicles
• Productionize and deploy solutions onto autonomous vehicle fleets
• Mentor and grow junior and experienced engineers and researchers
• Help create and reinforce a culture of inclusion, innovation, and excellence

What We’re Looking For:

• Masters or PhD in Machine Learning, Computer Science, Applied Mathematics, Statistics, Physics or a related field; or equivalent industry experience
• In-depth understanding of common Machine Learning and Deep Learning algorithms
• Experience designing, training, and analyzing neural networks for at least one of the following applications: object detection, semantic/instance segmentation, visual classification, motion/gesture recognition, sensor fusion, multitask learning, motion prediction, and/or multi-object tracking
• Effectiveness at leading and executing large, complex technical initiatives
• Strong track record of tackling ambiguous problems, creating clarity from it, and driving it to successful outcomes
• Advanced knowledge of software engineering principles including software design, source control management, build processes, code reviews, testing methods
• Fluency in Python, including standard scientific computing libraries and Python bindings development experience
• Experience with PyTorch or other deep learning frameworks
• Experience working with large data sets and deriving insights from data
• Experience mentoring and leading others

Requirements:

-Higher Nitec / Diploma In Electrical & Electronics Engineering

-3-4 Years of Working Experience In Security Software Industry / Electronic Software Industry.

-( At Times Need to Handle Heavy Hardware Equipment )

-Stand-By Duty is Required

-Mobile / Transport / Stand By Claims Provided

Duties

-Handling of Measurement and Detection Equipment for Military & Homeland Security.

-Perform Regular Maintenance and Carry Out Diagnostic Analysis for Trouble Shooting and Repair Work.

-Strong I.T. Software Installation and Configuration Skills.

5-day work week

Location: Jurong area

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

As the Global FE Layout Senior Engineer at Micron Technology, Inc., you will be part of Micron’s Global Factory Automation team which is responsible for designing Micron’s next generation manufacturing facilities.

Your objective is to develop full factory tool layout models that will be the basis of design for industry leading manufacturing facilities across the globe. You will be part of a diverse group of highly skilled layout professionals who are responsible for tool layout design, construction design support, and the layout business process. In addition, you will partner with Micron’s Technology Development team to develop innovative semiconductor production tools that deliver word-class, trail blazing, capabilities that solidify Micron’s manufacturing leadership.

Primary Responsibilities

• Generate Layout models for Micron’s U.S. manufacturing sites that meet or exceed established critical metric targets.
• Establish Layout requirements during Micron’s quarterly business plan reviews.
• Collect and analyze Layout date for Micron’s manufacturing sites to find opportunities for improvement, recommend design changes, and identify new processes that will improve Micron’s overall manufacturing efficiency.
• Maintain a Layout data repository (SharePoint) that can be demonstrated for historical validation as well as information sharing across multiple departments.
• Collaborate with the Technology Development team to influence the design of future process equipment that enable improved space efficiency.
• Actively engage and contribute to Micron’s environmental sustainability projects.
• Present your layout designs and recommendations to Micron’s Senior Leaders and Executive team.

Requirements

• Bachelor’s Degree in related field or equivalent professional experience (MS Degree Preferred)
• Five years’ specific and confirmed experience
• Expert proficiency using AutoCad, BIM, Revit, Factory Design Utility and other similar Layout software applications.
• Direct experience with process equipment and facilities design.
• Fluent in English both verbal and written.

Working Location : Micron Fab10

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities

• Identify and connect with potential clients to provide specialized solutions for their processes.
• Oversee the entire sales cycle, generating leads to post-sale support.
• Collaborate with global cross-functional teams and work closely with technical and R&D departments to tailor solutions to client needs.
• Contribute to business development by identifying market trends and growth opportunities in the region.
• Build and maintain strong client relationships.
• Negotiate and finalize sales by reaching mutually agreed terms and conditions.
• Provide ongoing support after sales are completed.
• Manage and organize client accounts.
• Evaluate costs and sales performance.
• Prepare and submit weekly management reports.
• Consistently work to meet sales targets.
• Maintain and update client contact information.
• Participate in marketing activities, such as trade shows, conferences, and other events.
• Deliver technical presentations and showcase how products meet client needs.
• Offer technical support and product training before sales.
• Assist the sales manager with data analysis and sales presentations.

Requirements

• Minimum of 2 years experience in metrology sales or scientific equipment sales. Fresh Graduates are welcome to apply.
• Degree in Physics, Materials Science, Chemical Engineering or any related engineering
• Candidate with knowledge of lab equipment or metrology equipment in semiconductor process will be an advantage.
• Attractive remuneration package which includes basic salary + AWS + Variable Bonus + Transportation Allowance and others await the successful candidate.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Position: Sales Engineer

Working Day: Monday – Friday (8.30am – 5.30pm)

Working Location: Woodlands

Salary: $2300 - $3,000 + Mobile Claim + Transport Allowance (Cab-charge Card)

Requirements:

• Possessed Diploma in Engineering or any equivalent qualification
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Willingness to travel oversea as required
• Training Provided

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Responsibilities:

• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions
• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements
• Any other relevant duties

Requirements:

• Min of Diploma in relevant field
• Min 3 years of relevant project co-ordination or management experience
• Candidates with horticulture experience will have an advantage
• Excellent team player and highly dependable
• Hardworking with a strong sense of urgency and accountability

Responsibilities:

• Responsible for physical design, development for variety of SoC(System On Chip) and tapeout.
• Execute state-of-art methodologies include, floor-planning, place and route, RC extraction, timing and power optimization, physical verification.
• Doing benchmarking on Performance/Power/Area to validate the robustness of APR flow.
• Enhance project efficiency by using scripting language like Perl, TCL, Python etc.
• Provide feedback to flow development team for company flow enhancement.

Requirements:

• Bachelor of Science and above degree with microelectronics background.
• Willingness and ability to travel as needed.
• Be able to demonstrate you have the ability to prioritise, organise work, meet deadlines, multitask.
• Good communication and teamwork, able to work under pressure.

EA License No. 01C4394 • RCB No. 200007268E •EA Registration No. R22109454 Malcolm Lee Jun Hao

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Responsibilities:

• Proactively create, test, and tune new detection use-cases in the SIEM
• Review and enhance existing detection use-cases using Machine Learning or User & Entity Behaviour Analytics (UEBA).
• Map detection use-cases to the MITRE ATT&CK framework to assess SIEM monitoring coverage.
• Perform regularly updates to threat detection engineering playbooks, processes, and documentation.
• Collaborate closely with the SOC to challenge and improve detection and prevention capabilities.
• Identify and implement SIEM use-cases to address blind spots.
• Coordinate with the log onboarding team and SIEM architect to validate new log sources for compliance and improve SIEM backend performance.
• Collaboration with Service Operations team to address challenges, process fulfillment, documentations, and improvement of Service Operations Quality.
• Provide governance on topic which related to operational stability.

Requirements:

• Degree from a reputable university or significant course work in Computer Science, Networking, engineering or other computer-related fields of study.
• At least 3 years of experience with demonstrable skillsets in SIEM use-case engineering, with over 5 years of experience in cybersecurity
• Previous relevant experience working in a security operational role, ideally within a Corporate, Military, or Police environment; engaging with and responding to a diverse array of internal stakeholders, including senior management
• Have good emotional intelligence and is a proven team player
• Rational and calm under pressure

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9740

http://www.peopleprofilers.com

EA License Number: 02C4944
Registration Number: R1330005
Posting Personnel: Reeve Lim Kok Kiong

• Salary up $4500
• Main Con
• West Area
• 8am to 5pm

Responsibilities:

• Review project specifications, technical clarifications and construction drawings.
• Carry out construction works scheduling, material requisition, cost control, project supervision and documentation to ensure compliance to regulatory.
• Co-ordinate with the Structural, Architectural and M&E staff to resolve related problems and issues.
• To perform QA / QC role on area assigned
• Assist project manager in planning and execution of project plans at site

Requirements:

• Degree in Civil Engineering and PEB recognized degree
• Candidate without experience are welcome to apply

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1222284 | Kelvin Soh

Sales Representative / Sales Engineer (Fire Pumps)

Working hours: 8.30 am to 5.30 pm on weekdays and 8.30 am to 12.30 pm on Saturdays

Work Schedule: 5.5 days work week during probation and upon confirmation: 5 days a week and one half Saturday a month

Budget Up to $5,000 (Include $800 transport allowance + phone allowance)

Entitled to AWS + Variable Bonus

Office Near to Farrer Park MRT

Requirements:

1. Must be familiar with fire pump and the market for fire safety. In lieu of fire pump experience, must have at least experience with marketing of water pumps
2. Preferably have technical background in the relevant field at least at ITE level in specializations like electrical engineering, mechanical engineering, mechatronics etc.
3. Technicians / engineers with knowledge of the above product who keen to switch to sales role is welcome to apply.
4. Preferably have related sales experience and able to present to customer and consultant
5. Need to have at least class 3 driving licence and own vehicle.

Job Scopes

• Grow the fire pump portfolio
• Prepare quotations and tender submissions
• Attend to sales enquiries, sales support and site related matters
• Update management on the progress of projects
• Visit customers at their work place / office
• Any related ad-hoc duties
• Opportunity to handle the full spectrum of big projects

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Laser Machine Service Engineer ( Semiconductor )

• Office: (Bendemeer), most of the time at customers site (island-wide)
• 5 days Mon-Fri 830am-530pm,1 hour break
• $ 3,500 - $ 4,000

Job scopes and requirements:

• Install, troubleshoot, repair & service of laser machine.
• Carry out regular maintenance, repairing of equipment/machines and follow up on work orders, onsite-support equipment/machines installation
• Diploma in Electrical /Electronic or Engineering.
• 1-2 years working experience in Laser Application Equipment and Semiconductor Industrial, knowledge of electrical & mechatronics.
• Willing to travel island-wide

Apply now for Interview arrangement

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About the Team

Video Infrastructure is a world-leading video platform that provides multi-media storage, delivery, transcoding, and streaming services. We are building the next generation video processing platform and the largest live streaming network, which provides excellent experiences for billions of users around the world. Popular video products of TikTok and its affiliates are all empowered by our cutting-edge cloud technologies. Working in this team, you will have the opportunity to tackle challenges of large-scale networks all over the world, while leveraging your expertise in coding, algorithms, complexity analysis, and large-scale system design.

What you will be doing:

1. Responsible for the design, development, and maintenance of TikTok's video architecture basic services backend.

2. Design and develop high-traffic and high-concurrency online systems.

3. Research new technologies related to big data platforms and provide feasible solutions for business analysis and data applications.

Qualifications

Minimum Qualifications

1. Bachelor's degree or above in computer science or related fields.

2. Solid programming skills, excellent design, and good coding style.

3. Proficient in one of the mainstream programming languages, such as Golang/C/C++/Java/Python.

4. Deep understanding of computer principles and a good foundation in data structures and algorithms.

5. Familiar with common backend components such as MySQL, Redis, and message queues.

6. Familiar with big data components such as HDFS, HBase, Hive, Spark, and Flink is preferred.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

OVERVIEW & IMPACT:
Samsung Electronics Device Solution is a global leader in Memory Semiconductor technology. The Senior Field Application Manager for Memory team will be main contact window with our Headquarters team in Korea for our sales office in Singapore office and other ASEAN countries. The incumbent Work closely with customers and HQ team for problem solving, as well as to provide technical support to the customers during product development stage and analyze failure for design-in/sustaining product. To understand how to validate and analyze failure of SSD product and able to liaise with respective stakeholders

JOB RESPONSIBILITIES:

• Perform or carry out test for memory product qualification
• Analyze/Identify failure and find root cause on qualification and field
• Explain and provide details of technical issues to HQ team and customers
• Conduct proper test to support customer's request
• Regular visit to develop and enhance relationship with customers
• To provide failure analysis support to regional memory customers
• Follow up on quality issues and co-work with Samsung HQ to solve it effectively
• Work with customer to carry out business specific quality initiatives
• Participate in QTR/QBRs.

QUALIFICATIONS & REQUIRED SKILLS:

• BS degree or MSC in Engineering (Electrical/Electronics) or equivalent

• Minimum 10 years of relevant experience

• Field experience or hands-on practice or knowledge of multi-disciplinary system design and development (systems such as electrical, electronics, computerized, mechanical and / or combination of these). Must have good knowledge of memory products

• Fluent in Korean language would be an advantage to communicate with headquarter

• Understand Memory related ecosystem in ASEAN and India region

A qualified person should have at least 10 years in SSD development/test/analysis engineer role. Relevant QA experience in the semiconductor/electronics industry will be an added advantage.