Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

The Fire Engineer will be working in a specialist team of experienced engineers covering a broad range of skills relating to the fire industry. This role should have completed fire engineering OR related tertiary studies or a professional with a skill that complements fire engineering that are able to bring knowledge of your discipline and the team.

The Opportunity

• Involve in all types of fire engineering design projects, providing detailed technical input across abroad range of projects within the fire engineering business and related areas.
• Undertake the design, engineering, and documentation, provide specialist input, resolve technical problems, and ensure quality of products and services on projects.
• Ensure own work quality is maintained at the expected technical standard, according to Arup’s Quality Management Systems.
• Communicate effectively with external stakeholders and effectively manage the time, quality and performance of small projects with minimal supervision
• Meeting deadlines, monitoring budgets and controlling expenditure to meet financial targets in your own area as well as prepare project reports for clients to summarize the key issues and strategically advising on the best outcome.

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

Is this role right for you?

• Recognized relevant tertiary qualifications in Engineering, specializing in Fire Engineering or relevant area with minimum 3 years of experience.
• Recognized qualification for application of FSE registration is an advantage.
• Hands on experience in fire engineering in Singapore; working knowledge of computational fluid dynamics (CFD) smoke modelling and evacuation modelling.
• Be fully aware of all legislative requirements and other regulations governing Occupational Health and Safety.
• Attention to detail with problem-solving and analytical skills with the ability to stay informed about changing fire safety codes, standards and regulations.

What We Offer You

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Please see a list of Arup’s Singapore benefits below:

• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Paid Annual subscription to relevant Professional association
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

Job Description:

• Design and configure CRM forms, views, dashboards, and workflows.
• Create solution designs to address client business, interface and performance requirements.
• Advise on complex MS Dynamics CRM business cases and propose comprehensive solutions that include MS CRM, third-party integrations, and customizations.
• Create functional requirements and designs for customizations.
• Create accurate estimates for implementation tasks.
• Provide MS Dynamics SME expertise to clients and mentor team members.
• Assist in data migration (data mapping) from external systems into MS CRM

Job Requirements:

• Bachelor's degree in Computer Science, Software Engineering, or a related discipline.
• 3-5 years of experience with Microsoft Dynamics 2016/365 CRM.
• Experience in customizations, JavaScript, C#, .NET, HTML, SQL Server, SSRS including plugins, scripting and form creation.
• Familiarity with the O365 platform, specifically its integration features with Dynamics CRM, including SharePoint and OneDrive/OneNote.
• Familiarity with Data Export Service and Azure SQL.
• Experience with SSIS or other ETL technologies.
• Experience with CRM API, REST/ODATA and SOAP endpoints would be advantageous.
• Strong written communication skills, especially for articulating technical specifications.

1. Pre-Construction Phase:Review project plans, specifications, and design documents.
   Assist in value engineering to optimize costs and improve project efficiency.
   Develop preliminary project schedules and budgets.
   Assist in selecting subcontractors and vendors.
   Obtain necessary permits and approvals.
2. Construction Phase:Oversee and coordinate all construction activities.
   Manage and coordinate subcontractors, suppliers, and vendors.
   Monitor project progress and ensure adherence to schedules and budgets.
   Implement and manage quality control and safety programs.
   Address and resolve any issues or conflicts that may arise on-site.
   Regularly communicate with the project owner or client to provide updates.
   Keep detailed records of project activities, changes, and any incidents.
   Conduct regular site meetings with stakeholders to review progress and address concerns.
   Ensure compliance with building codes, regulations, and permit requirements.
   Manage the procurement of materials, equipment, and services.
   Review and approve subcontractor invoices and change orders.
   Coordinate inspections and tests as required.
3. Post-Construction Phase:Conduct a final walkthrough and inspection of the completed project.
   Prepare and submit any necessary closeout documentation.
   Assist with the resolution of punch list items and ensure completion.
   Ensure that all required warranties, manuals, and as-built drawings are provided to the owner.
   Hand over the completed project to the owner or client.
4. Overall Responsibilities:Provide leadership and direction to the project team.
   Manage project risks and identify potential issues.
   Monitor and control project costs to ensure budget adherence.
   Facilitate effective communication among project stakeholders.
   Ensure that project goals for quality, safety, schedule, and budget are met.
   Maintain a safe and organized construction site.
5. Qualification: Minimum Mechanical / Electrial Engineering Qualification.

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements:
Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

EA License No: 96C4864

Reg. No.: R24121728

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements:
Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

EA License No: 96C4864

Reg. No.: R24121728

Geotechnical Engineer

Visit www.ourengineers.com

Undertake detailed design in Geotechnical field for different nature of projects
Develop design concepts and construction methodologies and provide leadership in sectional project execution
To liaise with Client, Client’s Consultants, Contractor, and Local Authorities to obtain design approval

Description:
Degree recognised by PE Board (Singapore).
3-5 years relevant experience in consulting firms (those above 5 years experience will be considered for Senior Engineer post)
Familiar with geotechnical design software such as Plaxis, RocScience, etc
Experience in design of deep excavations, foundations, ERSS, tunnelling, pipejacking, slope stabilisation, soil improvement, etc
Experience in civil, infrastructure, utilities, coastal and marine works

• Able to read and understand construction drawings and detect discrepancies for combined services.
• Responsible for the smooth and timely completion of projects
• Maintain all operational documentations and records
• Monitor and review performance of mechanics and draughtman
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Prepare and issue of weekly and Monthly QA/QC reports.
• Manage projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications to ensure cost control, maintain project timeline, manage manpower resources for the project.
• Undertake ad-hoc responsibilities assigned by sale manager / director

Requirements

• Degree in Mechanical Engineering
• At least 2 years experiences, preferably in the building & construction.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts
• Able to work independently and in a team
• Good interpersonal, analytical and problem-solving skills
• Required to travel to construction sites and analyze the deployed machineries' repair status when the need arises.
• Good understanding of local regulatory and code requirements.

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board

• Maintain max passing yield results

• Test Board Maintenance activities (Perform socket replacement and testing)

• Identify Issues

• Reporting of service activities

• Management of spare socket inventory

• Technical service on industrial chambers

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

1 - 2 Years Experience

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Able to do soldering work on tiny component

Job Scope:

• Supervise site operations and daily activities on construction or engineering sites
• Manage project timelines to ensure the project stays on schedule
• Coordinate with contractors, subcontractors, and suppliers for timely delivery of materials and services
• Ensure quality control by conducting site inspections and monitoring work to meet design specifications
• Monitor and enforce safety standards to comply with health and safety regulations
• Manage resources, including manpower, equipment, and materials for project efficiency
• Provide technical support and troubleshoot issues as they arise on-site
• Review plans, blueprints, and technical drawings, offering feedback and solutions
• Prepare daily and weekly progress reports for senior engineers or project managers
• Maintain accurate project documentation, including records of site activities and materials used
• Assist in cost control by monitoring project expenses and tracking material usage
• Supervise the installation of systems or equipment as required
• Collaborate with design engineers, architects, and other stakeholders to ensure project alignment with design
• Conduct and participate in site meetings to discuss progress, challenges, and next steps

Requirements:

• Degree in Civil Engineering or equivalent
• 3-5 years of relevant experience, with at least 2-3 years in LTA underground or MRT projects
• Experienced in managing underground projects, including D-wall, borepiling, and other structural works in Singapore.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOB SCOPE
Responsible for executing the company projects in building construction which covers.

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum a degree in Civil/Structural Engineering
• Minimum 5 years working experience in building construction
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Good communicative skills, able to interact with people of all levels and teamwork

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Candidate with experience as stated below will be an added advantage:-

a. Working with LTA and related Agencies

b. Underground pipe laying for Power & Telco

c. Road Works (Milling & Patching)

d. ERSS - Earth Retaining Support Sysytem

e. Site management and coordinations

f. Proper communications and detailed information flow

Infrastructure & Platform Services Team
You will help to build and sustain strong technology foundations forming the bedrock of our digital solutions.

What impact can you make in this role?
We are looking for Lead Cloud Engineer, who will enable our Cloud Native transformation efforts in alignment with the next iteration of our customer’s technology transformation journey, all with the goal of driving developer velocity and therefore business agility and value. This role will see synergistic collaboration with senior leadership and teams/squads of product-minded architects, engineers, and application developers, who are passionate about “building cloud applications and not just applications in the cloud”.

What will you do as an Cloud Engineer, Technology Group?

Enable Cloud Native transformation strategy and roadmap

• Enable the next iteration of cloud strategy by planning and executing against the vision for an agile organization that leverages cloud native to take full advantage of cloud computing
• Communicate the case for and benefits of increased cloud native adoption to senior stakeholders, business units and business solution teams
• Enable roadmaps and pathways for the rationalization and modernization of applications to just-right cloud services, platform, and architecture within our hybrid cloud (public and private) ecosystem
• Measure and track progress of cloud strategy through the development of effective Key Performance Indicators (KPIs) that set the conditions for successful cloud native adoption, culture, behaviour, and differentiating business outcomes

Enable Cloud Centre of Practice and Excellence

• Champion and exemplify cloud native practices, including cloud native philosophy, architecture, principles, and culture
• Lead product management, including research and proof-of-concept, for emerging cloud native services and platforms, for example, enterprise containerization, landing zones, orchestration, and automation
• Define cloud reference architecture, standards, and processes within the enterprise, for example, provide opinionated landing zones that comprise a set of policies or rules to enforce a security baseline and prevent non-compliant activities
• Perform cloud governance role in disciplines like identity & access management, tenant/account management, security & compliance, and billing
• Provide common tooling, solutions, and patterns for cloud native adoption and developer enablement, productivity, and self-service
• Assist application and developer teams to onboard applications to hybrid cloud (public and/or private) services and platforms
• Provide education and learning opportunities to enable teams to understand existing and emerging cloud computing technologies, as part of overall cloud capabilities building

Deliver Cloud Engineering and Operations

• Implement opinionated set of technologies, on top of cloud service provider(s), to consolidate institutional knowledge, tooling, patterns and practices; and deployable artifacts to production
• Provision cloud services to developer teams based on pre-stipulated service level agreements
• Manage the maintenance of virtual appliances, for example, AMI, and base container images
• Manage cloud operations disciplines like patch management, network configuration, certificate management, logging agents, and intrusion detection
• Steward cloud spend and budget, including the monitoring of cumulative usage, identifying of areas for optimization, managing reserved instances (RI) and negotiating on committed spend agreements
• Manage support vendor partnerships through regular vendor stewardship meetings and service level and escalation reporting

Provide technical leadership

• Provide technical coaching and mentoring to enterprise architects, application and infrastructure teams on cloud native architecture, philosophy, and practices

What qualifications or skills should you possess in this role?

• At least 8 years of relevant experience in delivering hybrid cloud strategies, operating models, and technology service management practices
• Bachelor’s Degree or Master’s in Computer Science, Information Technology or equivalent
• Some return-on-investment and business case development experience
• Strong communication abilities to influence key stakeholders ranging from C-level executives, MDs, CISO, application architects and subject matter experts
• Proven track record of delivering cloud applications on Amazon AWS and Microsoft Azure using cloud-native design and patterns
• Proven experience in designing microservices, event driven architecture using open source, .NET, NodeJS, Python, Java, message queues, streaming, databases, and cloud data services
• Extensive experience in architecting applications and automation technologies to meet the expected standards of availability, agility, capacity, resiliency, and security
• Hands-on experience with cloud technologies including, Docker, Kubernetes (particularly RedHat OpenShift 4.x), Infrastructure as Code, Service Mesh, Immutable Infrastructure, and declarative APIs
• Hands-on experience automating full lifecycle management of application hosting platforms in data center and public cloud using DevOps practices and CI/CD methodologies
• Strong understanding of Infrastructure and Platform Automation technology products such as Amazon CloudFormation, VMware vRealize Suite, HashiCorp Suite, Puppet, Ansible, and Chef
• Strong understanding of AGILE, LEAN or SaFE methodology
• Strong understanding and knowledge of industry technology standards, and security & compliance frameworks (e.g. NIST, CIS, CSM) and experience working with audit and regulatory bodies
• One or more AWS/Azure Certifications at Professional and/or Specialty level

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

The Network Services Operations position is a key role within the Command Center organisation to support the ever growing Network, Wireless, Security and Unified Communications products and services provided globally.
Within the Command Center organization this position is the Subject Matter Expert for the Network Services and Unified Communications. The role of the Command Center is to be the provider of end-to-end support to our customer base worldwide, thus the high level of expertise required to ensure the Command Center is fully self sufficient.
The primary focus is to ensure timely resolution of incidents brought to Level 2/ Level 3 and apply approved changes where applicable. You’re expected to provide knowledge sharing and transfer to the rest of the team.

Roles and responsibilities:
• Provide Customers with professional, timely and effective technical expertise on Network (LAN/WAN), Wireless and Security services support.
• Support or Provision Customer LAN/WAN/Security/Wireless changes on time and help to improve the process to “do it right the first time”
• Provide LAN/WAN/Wireless service support by owning customers LAN/WAN/Wireless incident within a complex topology (manage LAN, WAN, Wireless, IP Network routing or quality issues…) and developing a methodical approach to solve the incident or problem and escalate problem to supplier or internal Expert Practices when appropriate. Capable of analysing problems and resolving recurring difficulties through root cause analysis.
• Implementing LAN/WAN/Wireless/Security change requests for customers on the managed LAN/WAN/Wireless/Security solution (Cisco Router, Cisco Switch,Wireless (Aruba/MIST), Cisco UC, Fortinet, Palo Alto, Juniper etc.).
• Maintain a comprehensive and update-to-date customer LAN/WAN/Wireless/Security topology database
• Operate customer WAN optimization and application compression environment base on product family from Juniper and RiverBed.
• Operate customer IPSec services based on product family from Cisco, Juniper, Fortinet, Palo Alto etc.
• Expert knowledge of Firewall Management (Cisco ASA, Fortinet, WMWare NSX, Palo Alto)
• Actively contribute to improve and map LAN/WAN/Security/Wireless/UC processes within ITIL framework
• Contribute to the achievement of customer satisfaction by proving best in class support
• Understand complex LAN/WAN/Wireless/VoIP integration with WAN, LAN, Wireless, Managed Firewall and Unified Communications

Qualifications:

• Diploma/Degree in Computer Science, Data Communications, Engineering (or equivalent)
• Experience in an operational role with industry Technical Certifications are required: Cisco, Fortinet, Juniper Palo Alto etc
• Good knowledge on one or more of the following areas:

o LAN/WAN/Wifi (Cisco Nexus, Juniper EX, Aruba, Huawei etc)
o Protocols (BGP, OSPF, EIGRP, MPLS, Multicast, QoS, SIP, VoIP etc)
o Security Management (Cisco, Juniper, Fortinet, Palo Alto, VMWare NSX etc)
o Unified Communication (Cisco UC Manager, Cisco Voice Gateways, Microsoft Lync, PureCloud, Call Accounting, Contact Center etc)
o Tools and Automation for LAN/WAN/Wifi/Firewall etc
o Application compression, optimization and load balancer (Riverbed, F5 BigIP, Netscaler etc)
o Virtualization (VMWare) and Cloud Operations (IaaS, DaaS, SaaS etc)
• Experience in project delivery

For more information, please visit to www.gmprecruit.com and search for Job Reference: 21519

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Tang Lee Ling | Registration No: R1106845