Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Summary:

The Sales Administrator supports the sales team by managing administrative tasks, including order processing, client documentation, and maintaining accurate records. Key responsibilities include assisting with demand forecasting, preparing sales reports, coordinating with internal teams (logistics, inventory, China team), and facilitating communication with clients.

The role involves acknowledging customer orders, coordinating with Logistics for timely fulfilment, and supporting sales team activities, including preparing client proposals and quotations. Strong organizational, communication, and analytical skills are required, along with the ability to collaborate across departments to meet business objectives.

Key Responsibilities:

1. Sales Support & Operations

1. Maintain supplies of sales presentation materials, including PPT slides and brochures.
2. Support sales efforts during tenders and projects.
3. Assist in daily sales operations and customer service.
4. Assist in setting up new accounts and provide necessary documentation for approval.
5. Scan and file quotations, proposals, and contracts for new accounts while maintaining accurate records.
6. Update databases, ensuring client contact information is current.
7. Communicate with Logistics and Accounts regarding dispatch, delivery times, and invoice queries.
8. Support product registration processes in Singapore.
9. Perform any other ad-hoc administrative duties as assigned.

2. Sales Performance & Reporting

1. Track sales team activities and performance.
2. Prepare monthly sales reports, including market conditions and team performance analytics.
3. Analyze client activity reports and present insights to the Sales Team.
4. Maintain and update reports, tools, and techniques to address client needs.

3. Client Management & Documentation

1. Send acknowledgment emails for sales orders received from clients
2. Collaborate with the China team on product costing, MOQ, artwork, pricing analysis, and client quotations (RFPs, RFQs, contracts).
3. Coordinate with the China team on processing samples and gift sets for customers.
4. Follow up with clients on existing and pending quotations and contracts.
5. Document and maintain client account records and financial profiles, including credit terms and other relevant details
6. Ensure compliance with organizational protocols related to clients' financial constraints and payment terms.

4. Product and Order Management

1. Assist the Sales Team to get demand forecast from Customer and collaborate with Logistics and Inventory Management.
2. Escalate product feedback to Quality Control for investigation.

5. Cross-Team Coordination

• Collaborate with the China team on product costing, MOQ, artwork, pricing analysis, and client quotations (RFPs, RFQs, contracts).
• Coordinate with the China team on processing samples and gift sets for customers.
• Aid the Sales Team in demand forecasting and collaborate with Logistics and Inventory Management.

Internal Contacts:

• Teams in China (Shenzhen)
• Hong Kong HQ Team

External Contacts:

• Prospective and existing clients

Skills and Experience:

• Administrative experience in the hotel/hospitality industry, FMCG, or related sectors, with vendor or supplier experience and an understanding of sales operations and client servicing, is a plus. The role requires adaptability in a fast-paced environment and the ability to manage competing tasks and client needs effectively.
• Understanding of the travel/lifestyle market, particularly hotels and resorts.
• Ability to support the sales team in prospecting, development and closing new business opportunities.
• Experience working with the B2B model, including sales, client relationships, and account management

Competencies & Personality Traits:

· Customer-focused and professional with a positive, mature attitude.

· Strategic thinker who is results-driven and thrives in a collaborative team environment.

· Strong time management skills with the ability to meet deadlines and manage multiple tasks.

· Analytical mindset with the ability to interpret market trends and data for actionable insights.

· Self-starter who works independently and takes initiative to achieve goals.

· Excellent communication skills (both verbal and written) for managing stakeholder relationships.

· Highly organized with strong administrative and multitasking abilities.

· Culturally aware with a preference for proficiency in foreign languages, particularly Mandarin and Cantonese.

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

To support project manager and sales manager in adminstrative work

To help coordinate jobs

To help do quotations to customer

To help do service report for project manager

To help to reply email

To help sales manager to follow up on order and payment

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

Join Control Risks as a Regional Threat Intelligence Specialist supporting a Fortune 500 technology client! The Regional Threat Intelligence Specialist will work within the Global Security Intelligence function, supporting the collection, analysis, and dissemination of threat intelligence to stakeholders across the organization. This position will focus on a specific region, providing in-depth analysis and assessments of regional threats and trends, as well as actionable recommendations to mitigate risks. The Regional Threat Intelligence Specialist will be a key contributor to the development and maintenance of the organization's threat intelligence program.

Role tasks and responsibilities:

• Provide daily threat monitoring analysis to the client through monitoring of OSINT resources as it relates to the client’s data centers. 
• Identify, monitor, research, analyze and provide warnings regarding emerging threats and trends worldwide that may impact the client’s security planning and potentially impact the stability of its operations.
• Serve as a center point for the collection of information necessary for the analysis of the client’s security incident reports and suspicious activity logs on a global basis. 
• Produce well-informed, concise and relevant briefings/presentations tailored to varied stakeholders and business needs. 
• Perform content and copy editing on threat monitoring and intelligence analysis products.  

• Bachelor’s Degree with 3-5 years of experience in threat intelligence and intelligence gathering.
• Superior writing skills with a keen attention to detail. Strong written and verbal interpersonal and communication skills.
• Demonstrated knowledge of security analysis and risk assessments for physical security or security operations and planning.
• Superior research and Open-Source Intelligence (OSINT) skills. Quick-thinking and responsive during crisis events.
• Familiarity with or ability to quickly become expert in Seerist platform.
• Willingness to travel to locations in the APAC region.

Control Risks is committed to a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status.

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

We are seeking a highly motivated and experienced Quality Control Snr. Executive to join our team. The ideal candidate will have a strong background in ISO and AS certifications, as well as a proven track record in quality control management. In this role, you will be responsible for ensuring that our products and processes meet the highest standards of quality, aligning with ISO and AS certifications. You will collaborate with cross-functional teams to drive continuous improvement, implement best practices, and maintain a culture of quality excellence.

DUTIES AND RESPONSIBILITIES

• Assist in developing, implementing, and maintaining quality management systems based on ISO and AS standards.
• Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.
• Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians
• Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.
• Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.
• Assist in the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.
• Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.
• Monitor and analyze quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.
• Stay up-to-date with the latest developments in ISO and AS certifications, as well as industry best practices, and incorporate them into the quality management system.
• Assist in the preparation of audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

REQUIREMENTS

Qualifications and experience:

• Bachelor's degree in a relevant field (Quality Management, Engineering, Manufacturing, etc.); advanced degree or certifications (e.g., Six Sigma, CQE) are a plus.
• Minimum of 3 years of experience in quality control, with a focus on ISO and AS certifications.
• Strong understanding of ISO 9001 and AS9120 Standards, with the ability to interpret and implement their requirements effectively.
• Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.
• Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.
• Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.
• Detail-oriented mindset with exceptional organizational and problem-solving abilities.
• Familiarity with quality management software and tools.
• Strong leadership skills and the ability to collaborate effectively across departments.
• For candidate with extensive experiences will be considered for Asst.Manager/ Managerial role.

Personal Qualities:

• Proactive, driven and resilient
• Able to work independently and as part of cross-cultural team
• Meticulous, accurate and attention to detail
• Professional and calm

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Responsibilities:

• Oversees project costing, budget allocation, expenditure monitoring and cost forecasting
• Reviews the project revenue update and project cash flow
• Oversees Change Order Management and Claims with clients, vendors and subcontractors
• Ensures timely commercial and cost reporting
• Reviews and evaluates vendors and subcontractors CBEs
• Coordinates with respective stakeholders for payment milestone requirements

Requirements:

• Bachelor’s Degree in any Engineering disciplines
• Minimum 5 years of relevant experience as project control manager
• Possess good communication and interpersonal skills

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.