Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Responsibilities:

· Perform QC inspection at various stages of production and identify non-conformance quality issues.

· Perform QC inspections on incoming, WIP and outgoing parts in accordance with work instructions

· Liaise with relevant stakeholders for any material quality-related issues and closely follow-up effectiveness and closure of corrective actions.

· Collaborate with the Engineering team to define and implement quality control requirements.

· Prepare QC report and status update to relevant stakeholders.

· Maintain all QC document master list including including Mill Certificate / test report for all materials used in project.

· Maintain calibration status of Company’s equipment.

· Familiar with welding process such as SMAW, GTAW, SAW

· Any other ad-hoc duties as assigned.

Requirements: ·

· Minimum Diploma in Quality Engineering / Mechanical Engineering or equivalent

· Possess strong analytical skillsand meticulous individual

· Proficient in Microsoft Office

· Able to work both independently and as a team.

· Knowledge of ISO 9001, 14001, 13485 & 45001, FDA will be an advantage

· Preferable if able to commence work immediately

Cost Controller Executive

Summary of Responsibilities:

The main responsibilities and tasks of this position are as listed below, but not limited to these:

• To calculate the recipe cost based on the input from the Chef / Bartenders 
• Check the ingredients of the recipe – the quantity, the code, the cost price, the loss factor  
• To calculate the potential beverage cost for every bars/outlets – either based on the recipe cost or item price  
• Calculate the cost of event based on Banquest Beverage Control 
• To ensure in absence of POS system, the manual system’s compensating controls should include a chit system for all food orders sent to kitchen or bad for preparation/creation 
• To ensure creation for new/change of Discount Key must approve by Director of Food & Beverage, Director of Finance and Hotel Manager before creation. Outlet Manager must submit printed test check after key created. ( As Operationly Required) 
• To update Menu Engineering for all F&B outlets as followss 
• Revenue as per Sales Report from Point of Sales System  
• Cost as per on the Recipes provided by Chefs 
• Conduct stock take in the kitchens, bars, resturant, Food Store, Beverage Store, Tobacco Store and Wine Cellar 
• Involve in monthly Stocktaking for outlet and Store. Perform reconciliation for the Store inventory to zero variance end of day 
• Compile inventory summary for the hotel to facilitate month end closing and follow up with approval from Director of F&B, Director of SPA and Director of Finance to ensure full compliance with FRHI standard 
• To assist Cost Controller in F&B Flash Cost Report preparation twice a week. The task include Purchases and Store requisition compilation; Inter Kitchen Transfer; Inter Bar Transfer; Accrual and Food Credit (FAR Discount and S&P).  
• Invlove in F&B Cost Analysis for month end closing
• Compile and audit Daily Adjustment Report (F&B Discount) and follow up with the Cashier and Outlet Manager if there is any mistake/discrepancy to ensure timely submission of Daily Operation Package  
• Compile and audit Daily Micros POS Void Checklist and follow up with the Cashier and Outlet Manager if there is any doubtful transaction otr typical wrong posting to ensure compliance of Key Control Point and timely submission of Daily Operation Package  
• Support the Receviving operation that may be assigned from time to time.

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

• planning and organising production schedules
• assessing project and resource requirements
• estimating, negotiating and agreeing to budgets and timeline with clients
• ensuring that health and safety regulations are met
• determining quality control standards
• overseeing production processes
• selecting, ordering and purchasing materials
• organising the repair and routine maintenance of production equipment
• liaising with buyers
• supervising and managing day-to-day work of junior staff and production workers in factory environment
• organising relevant training sessions
• ensure project goals are being met within approved budget.

REQUIREMENTS

• Min Diploma in management
• Min 2 years supervisory experience and 1 year experience in similar industry (manufactuing)
• PC literate
• Well organized & a team player
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• Extensive knowledge on safety processes

Quality Assurance Engineer shall be responsible for leading a team of QA personals, maintain quality assurance protocols in a shipyard environment. Manage day to day inspections onsite and shall be the liaison between shipyard construction teams and client pertaining to quality assurance matters.

Job Description:

• Minimum 10 years of work experience in Rig Construction Industry (Oil & Gas Shipyard Environment)
• Must possess experience of working & managing Quality assurance matters in rig upgradation / repair assignments in shipyard environment.
• To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support the plan.
• Manage and coordinate Material arrival inspections and sign-off
• Audit vendors' compliance to organizations and regulatory quality standards.
• Ensure standard operating procedures (SOPs) is closely adhered to across organizational departments.
• Ensure departments are operating in alignment with organization’s quality policies.
• To develop and manage the quality control and quality assurance procedures and ensure works are up to the specifications.
• Conduct internal QMS audit on documentation where required and reporting of quality-related issues
• Coordinate with classification societies' and owners' representatives for relevant inspections
• Facilitate continuous improvement of production quality by implementing corrective and preventative actions (CAPA) plans
• To Perform needed tests on site to ensure works are done according to the contract specifications.
• To prepare inspection reports
• Attend meetings and liaise with the client to ensure that quality requirement is being followed at all times.
• Maintain document record master list pertaining to equipment’s & monitor on the calibrations.
• Ensure documents and record-keeping are in compliance with quality procedures for internal and external audits
• Perform other activities as per instruction by Project Manager / Engineer.
• Excellent English communication abilities, including writing, speaking and active listening.
• Proficient in MS Office applications.
• Must be able to understand, read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Register, monitor & Closure of NCRs, Punch Lists in construction projects.
• Willing to work in a fast paced and challenging repair environment
• Ability to work in a team.
• Ability to work under pressure.
• Independent and self-motivated individual.
• Ensure quality documents related to the project are maintained regularly for final dossier compilation.

Qualifications:

• Min 10 years of work experience in a similar position in shipyard, ship building industry (Oil and Gas industry preferred).
• Bachelor’s / diploma in Engineering or related field.

Job location: Jalan Buroh (West area)

Shuttle bus will be provided from various MRT stations.

Job Summary

• Assist in Quality audits, certifications, and other quality management
• Responsible for Quality Documentation (QD) section.
• Main document controller for QA department.
• Handle change control management.
• Update training plan QA department and ensure the plan is followed
• Compile monthly Quality KPIs reports
• Perform quality review / trending for CAPA/ complaint/ change control etc.

Responsibilities

Quality Documentation practice (60%)

• To ensure QMS documents for QA department are updated and reviewed as per individual review date.
• To update and maintain QMS document masterlists / schedules.
• To Updated schedules / authorized personnel name lists / emergency contact list etc.
• Oversee other departmental document controllers to ensure they adhere to document control SOPs.
• To ensure regional QMS documents are adopted locally by respective process owner, when necessary.

Training Plan (20%)

• To maintain and update training plan for QA department.
• To maintain and update training record for QA department.
• To ensure QA team adhere to training plan.

Quality Documentation practice (10%)

• Compile monthly Quality Department related reports
• Assist in training management, to conduct training for QA SOPs / quality-related process such as GxP requirements and to verify warehouse conducted training as per training schedule. (Deviation report will be issued if found non-compliant).

Assisting in other QA-Related tasks (10%)

• Back up PIC of Quality Compliance in the absence of PIC.
• Assist in tasks assigned by management when required.

Functional Skills and Knowledge

• Knowledge in ISO 9001/13485 standards
• Knowledge in GxP requirements (x – storage, manufacturing, distribution)
• Strong data analysis skills, management and reporting skills
• Problem-solving skills

Education and Experience

• Bachelor's degree in quality or science
• Minimum 3 years of Experience in Quality Assurance or relevant fields.

Centre for Advanced Robotics Technology Innovation (CARTIN) is looking for a candidate to join them as a Research Associate.

Key Responsibilities:

• Develop models, algorithms, and methods for multi-robot-human collaboration.
• Write the research results into project reports (and publication manuscripts if applicable).
• Contribute to project reporting and use case demonstration.

Job Requirements:

• Master in Electrical Engineering, or Automation, or Computer Science and Engineering, or related disciplines from a prestigious university
• Have research and/or academic achievements in related areas
• Knowledge in at least one of the following topics: human-robot collaboration, multi-robot cooperation, control and optimization, robot control, robotics
• Good simulation and programming skills
• Good interpersonal skills
• Good English verbal communication and writing skills

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities

• Plan and carry out the new setup
• Provide guidance to the application user
• Provide application troubleshooting
• Log, escalate, and follow through with issues raised by users
• Support in the testing of new applications and enhancement patches
• Conduct training for users on the use of the application

Job Requirements

• NITEC/Diploma in IT or relevant discipline
• Possess good communication & interpersonal skills
• Patient, polite, friendly, and helpful personality
• Positive attitude, dynamic, resourceful, and independent
• Able to cope with a fast-paced environment
• Knowledge of Microsoft SQL will be an advantage
• Junior/entry-level are welcome. Training will be provided

Job Responsibilities

• Software design and optimization, focusing on coding and debugging
• To design, develop, and maintenance of Android and iPhone Apps
• Maintain existing mobile apps on IOS and Android platform
• Troubleshoot and debug to optimize performance
• Knowledge of Java, Swift, Kotlin, MSSQL, C#, and VB
• Develop application programming interfaces (APIs) to support mobile functionality
• Use and adapt existing web applications for apps
• Proficiency in Swift and Swift Storyboard is advantageous
• Troubleshoot and debug to optimize performance
• Design interfaces to improve user experience
• Ensure all developments are of high quality and comply with the required specifications
• Stay up-to-date with the technology trends, security and data protection, concepts, and best practices for coding mobile apps

Job Requirements

• Candidates must possess at least a Diploma/ Degree in Information Technology/ Computer Science/ Computer Engineering
• hands-on proficiency in iOS app and Android development
• Familiar with the Mobile Application Development life cycle
• Demonstrable portfolio of released applications on the App Store or the Android market
• Good interpersonal and communication skills in English
• Excellent project and time management skills
• Patient, polite, friendly, and helpful personality
• Creative and able to work independently and as a team in a stimulating multi-disciplinary environment emphasizing teamwork
• Able to cope with a fast-paced environment
• Experience in web application development is an added advantage

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Summary:

• Permanent Full-time
• Basic up to $3,600
• Monday to Friday: 08:30 AM - 05:30 PM
• Location: Nearest MRT Newton

Job Scope:

• The role involves making collection calls to customers to ensure timely payment of outstanding debts.
• Responsibilities include negotiating repayment plans, coordinating with legal counsel on delinquent accounts, and tracking repossessed vehicles with agents.
• The position also requires maintaining regular client contact to clear balances, resolving queries related to outstanding payments, posting daily receipts into the accounting system, and performing various administrative tasks as needed.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*
We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

WHAT YOU'LL DO

• Determine, review and analyze system specifications
• Manage and execute test scripts and reviewing results
• Report and document technical issues
• Create test plans, requirements, scenarios and test data for use during testing
• Provide feedback to developers and project managers around UX based on test outcomes
• Take your skills to the next level by working with the latest tech on cutting edge projects
• Raise an alert when an important issue is likely to put in jeopardy the whole project
•  Work closely with our team, learning from pros
• Be supported to learn and grow towards your professional and personal goals, whatever they may be
• Available part-time (20 hours/week) or full-time (40 hours/week)

Job Description & Requirements

Donald McArthy Trading is in the business of trading and processing non-ferrous metals, minor metals, rare earth metals, high temperature alloys and super alloys.

Job Overview:

• Responsible for overseeing and implementing quality control processes to ensure the processed metals meet customer expectations and complies with industry standards and regulations.
• Support the Assurance Supervisor in daily operations of maintaining and improving our quality management processes and systems, and ensuring compliance with all quality and safety protocols.

Key Responsibilities:

• Perform regular quality assessments on all incoming materials from vendors
• Ensure all finished products to be exported meet the specifications required and complies with industry standards
• Resolve quality-related issues in a timely manner
• Identify areas for process improvement and efficiency in quality control procedures
• Maintain inventory update of materials
• Document inspection outcomes by ensuring all completed detailed reports submitted to management are accurate
• Ensure all equipments are maintained according to SOP and overseeing repairs when not in good running condition
• Ensure the team completes the assigned daily work schedule and production target is achieved
• Ensure all employees follow workplace safety rules

Qualifications & Key Traits:

• Bachelor's degree

• Min 4 years experience in quality assurance management within the manufacturing industry

• In-depth knowledge of quality management systems, standards, and methodologies

• Strong leadership and team management skills

• Effective communication skills in English, both verbal and written

• Experience with regulatory/ safety compliance and quality audits

Key Duties / Responsibilities

o Implementation, administration, updates Quality Assurance manual and procedures, policies, programs and systems.

o Audit and inspect overall factory condition according to SFA, HACCP requirement

o Lead in sustaining SFA- ISO 22000/HACCP yearly surveillance audit

o Report factory daily products safety and hygiene performance, analyse and provide assurance to top Management

o Record all QC documents in factory and whole company

o Analyse quality of raw and finished products

o Establish necessary procedures or work instruction to accommodate inspection needs

o Ensure production process is under control as specficiation

o Conduct suppliers’ quality audits for compliance, prepare quality and feedback reports.

o Assists on the supplier/customers' questionnaires/feedback/complaints

o Assists in resolving customer quality and safety concerns

o To liaise with authorities (eg: SFA) on related Food Safety / License issues when required.

o Conduct hygiene training, daily inspection of process workers, process rooms and related areas

o In charge of health certificate application and laboratory reports arrangement and maintenance of such records.

o Audit critical categories for quality integrity and food safety.

o Any other QA/QC duties as assigned by the company

Requirements

· Diploma/Degree in Food Science/Food Technology/Microbiology or related disciplines.

· Minimum 2-4 years of relevant working in Quality and Regulatory related field in Food, preferably from FMCG

· Knowledge of Food/Product regulatory requirement and registration/licensing requirement

· Familiar with manufacturing/sampling processes and retailer QA/QC practices

· Experience in HACCP/ISO 22000 and Food safety is preferable.

· Familiarity/experience in internal auditing is preferred

· Be meticulous in work

· Independent, initiative and self-motivate is required

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and 20 supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Ensure transactions are recorded accurately and promptly in the accounting system.

Prepare invoices and statements of accounts (SOA).

Process payments to suppliers.

Perform monthly reconciliations against vendors' statements of accounts and bank statements.

Manage full sets of accounts, including monthly financial statements and annual management accounting reports.

Coordinate and liaise with external parties such as auditors, tax agents, corporate secretarial agents, and local tax and government authorities, as required.

Submit GST returns.

Singaporean/Singapore Permanent Resident (SPR) only

Looking for a qualified Engineer with a Diploma and/or Bachelors Degree in Mechanical Engineering with around 5 years of experience in the heavy structural fabrication industry.

The suitable candidate must be familiar with workshop processes in terms of welding, fabrication sequences, lifting methodologies, job allocation, and prioritizing. Soft skills to manage a multi-racial workforce with various skill and trade levels. Able to explain to the shopfloor staff the fabrication sequences and the ability to visualize the challenges ahead of time is a pre-requisite. Able to achieve and deliver set targets on time, maintaining a high level of safety. Knowledge and compliance with statutory safety requirements are a must. Ability to rise up to the occasion when the situation demands it.

Preference will be given to candidates with suitable experience and valid residence status, willing to travel a long distance, and with exposure to site work.