• Managing of all direct & indirect material inventory to ensure sufficient supply at all times.
• Coordinate warehouse activities such as distribution, issuance and receipt of cargoes of different temperature.
• Ensure all stocks are being stored at the right temperature and place.
• Monitor and Control material usage and ensure FIFO and ensure no supply issue at all times.
• Liaise with Purchaser & Quality team on any item quality issue to rectify and prevent supply shortage issue.
• Investigate any inventory discrepancies, reconcile all inventory reports and highlight all issues/findings for management review.
• Organize and conduct regular stock take in different locations to ensure stock accuracy.
• Maintain accurate inventory records of all locations and prepare regular inventory reports in an orderly and timely manner.
• Control all key items delivery daily and ensure to maintain safety stock and prevent over stocking.
• Responsible for stocks return, exchange and stocks adjustment functions.
• Address issues promptly, maintain operational standards, and enhance processes for optimal efficiency.
• Timely report and submit the KPI reports to the Manager.

Requirements:

• Diploma or equivalent education.
• Minimum 3 years working experience in a food / beverage manufacturing environment.
• Organized, structured, analytical and data-driven mindset.
• Good communication skills and able to work well with staff from all level.
• Able to work in fast-paced environment.
• Proficient in Microsoft office.

Job Responsibilities

• Lead and drive the team for continuous improvement on system and process, Conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.
• Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.
• Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.
• Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.
• Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.
• Manage customer complaint and attend customer meeting related to quality or metrology issues.
• Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.
• Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place
• Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements
• Assist in evaluation and qualification of new supplier.
• Other duties as and when assigned by Supervisor or Management

You may be authorised to:

• Contain suspected, non-conforming products and prevent from further processing.
• Stop new orders which do not conform to requirements.

Requirements

• Degree or Diploma in Quality Engineering or relevant
• Minimum 5 years of relevant experience in a plastic injection molding industry
• Knowledge and experience in GD&T, SQC tool
• Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.
• Ability to apply problem solving technique and provide solutions under minimal supervision.
• Good written and oral communication skills
• Organized, decisive, logical, Independent and possess leadership, organisation and communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Our client, a marine company in Singapore dealing with shipyard , is looking for a QA professional. As a member of the QA team, you will play a critical role in ensuring the highest standards of safety and quality across our operations. You will work closely with various departments to develop and implement QA policies, procedures, and initiatives. This is a unique opportunity to contribute to the success of a dynamic and growing organization in the maritime industry.

• Reviews and updates organization Quality policy and objectives for Management’s approval

• Reviews & updates company Occupational Health & Safety policy & objectives for Management’s approval
• Prepares, reviews and updates Quality Management System (QMS) and Occupational Health and Safety Management System (OHSMS) manuals, procedures and forms
• Interprets and implements quality assurance standards and procedures
• Reviews the implementation and effectiveness of standards and procedures
• Plans & conducts internal audits for ISO 9001:2015 & ISO 45001:2018 as scheduled in the annual work plan
• Plans and conducts Management Review Meeting for ISO 9001:2015 and ISO 45001:2018
• Manages 3rd party certification body audits for ISO 9001:2015, ISO 45001:2018 and BizSafe STAR
• Co-ordinates with respective Departments for the preparation for external audits
• Follow-up on post audits activities
• Manages Document Control for all QMS and OHSMS documents to ensure latest revision
• Supports and works with various departments in procedure reviews and updates, ensures changes are incorporated in a timely manner and assists in assessment of these changes
• Identifies training needs and organizes training interventions to meet quality standards
• Conducts Factory Acceptance Test (FAT), workshop fabricated items inspection and onboard completion inspection both internally and externally
• Prepares inspection reports of inspection outcomes and updates overall inspection status summary
• Liaises with Clients and CLASS Surveyors on external inspection
• Monitors and expedites closure of all non-conformances of the company, if any
• Responsible to create and review Risk Management Plan for projects

• With strong background in ISO:9001-2015 QMS
• Technical Inspection and Writing
• Organizational Performance Management
• Quality Systems Management
• Leadership
• QA for Interior Design
• Graduate in Business Management
• Experience in outfitting will be advantange

Singapore Citizen and Singapore residents will be given priority in the selection process. Only the shortlisted candidate will be contacted within 2 weeks' time. If you have not received any call or email from our recruitment team, assume that you are not shortlisted for the position.

Chan Chee Meng

EA 07C3069

R1110620

• NIGHT SHIFT
• 1 WEEK OFF 1 DAY SUNDAY NIGHT
• CAN ACCEPT WET MARKET ENVIRONMENT
• AREA : JURONG FISHERY PORT
• SELLING SEAFOOD
• PURCHASE SEAFOOD
• ARRANGE JOB TO STAFF
• CHECKING STAFF'S JOB
• RESPOND CUSTOMER
• NEED A LORRY LICENSE - SOMETIME NEED DELIVERY
• PACKING ITEM
• TEACHING STAFF
• EVERY DAY DO A REPORT TO BOSS
• SOMETIME NEED GO CUSTOMER'S WET MARKET SURRVEY

Job Summary:

Support in the daily business operations for drop shipment activities, including packing, quality check and preparation of delivery of pharmaceutical and nonpharmaceutical products for orders. Assist in drug stock management activities.

Core Responsibilities:

• Assist in the implementation of quality assurance and quality improvement projects and activities to meet the Good Distribution Practice and Good Distribution Practice Medical Device Singapore (GDP & GDPMDS) standard
• Assist in internal audits, record checking and implementation of post-audit corrective actions
• Support in preparing document, forms, chart and SOPs.
• Assist pharmacists in product recalls
• Assist in inventory management of pharmaceutical and nonpharmaceutical products
• Ensure proper storage and handling of drug stock
• Highlight equipment failures and unusual activities to pharmacists/supervisors
• Maintain the proper functioning of facilities
• Suggest improvements to workflows and procedures
• To carry out any additional job-related duties that may be assigned from time to time

Job Requirements:

• Diploma in Pharmaceutical Science or equivalent
• Experience in the pharmaceutical sector or Quality Management Systems specific to Good Distribution Practices (GDP or GDPMDS) preferred
• Organised, meticulous and pay attention to details.

· Assist WSHO to ensure all safety matters are complied with statutory, contractual and management system requirements

· Conduct regular site inspections and follow-up actions to ensure environmental compliance

· Prepare and submit the site Environmental Control Program to the Project Manager

· Inspect the construction site to ensure all facilities and equipment relevant to maintenance of environmental health are in proper working condition and do not pose any environmental health hazard

· Attend to all feedback on such irregularities and inform the Project Manager accordingly

. Implement and maintain proper procedures of Environment Management, administrative and recording system

· Any other ad hoc duties assigned by the management.

Requirements

Scope: (Pipe Jacking/ Pipe Laying/ SEWER Rehab)

Preferably with LTA working background and more than 3 years practicing experience.

Diploma / Degree / Advanced Professional Cerifications

Driving License & Own Vehicle is added advantage

Possess a valid registration with NEA as ECO

Independent with good communication skills

Job Summary:

Support in the daily business operations for drop shipment activities, including packing, quality check and preparation of delivery of pharmaceutical and nonpharmaceutical products for orders. Assist in drug stock management activities.

Core Responsibilities:

· Assist in the implementation of quality assurance and quality improvement projects and activities to meet the Good Distribution Practice and Good Distribution Practice Medical Device Singapore (GDP & GDPMDS) standard

· Assist in internal audits, record checking and implementation of post-audit corrective actions

· Support in preparing document, forms, chart and SOPs.

· Assist pharmacists in product recalls

· Assist in inventory management of pharmaceutical and nonpharmaceutical products

· Ensure proper storage and handling of drug stock

· Highlight equipment failures and unusual activities to pharmacists/supervisors

· Maintain the proper functioning of facilities

· Suggest improvements to workflows and procedures

· To carry out any additional job-related duties that may be assigned from time to time

Job Requirements:

· Diploma in Pharmaceutical Science or equivalent

· Experience in the pharmaceutical sector or Quality Management Systems specific to Good Distribution Practices (GDP or GDPMDS) preferred

· Organised, meticulous and pay attention to details.

JOB SUMMARY:

The Quality Engineer for Mechanical and Piping ensures adherence to project specifications and standards throughout engineering construction activities. The successful candidate will have responsibilities to encompass inspection, managing QA/QC documentation, coordinating meetings, and enforcing HSE regulations. Key tasks involve material verification, conducting audits, and resolving non-conformances.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance with HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Electrical and Instrumentation (E&I), you play a critical role in ensuring the highest standards of quality and compliance across EPC projects. Responsible for overseeing inspection and testing activities related to electrical and instrumentation systems, you will be responsible to ensure adherence to project specifications, codes, and standards. With a focus on safety and precision, you collaborate with project teams, subcontractors, and clients to drive quality assurance throughout all project phases.

RESPONSIBILITIES:

• Always follow all site safety requirements and use of PPE
• Write, modify, review, and implement project related ITP, Procedures, Specification requirements.
• Material Verifications on all incoming outgoing E&IC project related materials and prepare inspection reports.
• Perform specialist inspection surveillance of E&IC fabrication and installation to ensure that contractor carries out the fabrication and assembly work in accordance with the contract specifications, approved drawings and fabrication/erection and test procedures and the defined hazardous area requirements.
• Provide leadership for executing teams on E&IC.
• Perform daily QA/QC monitoring and surveillance.
• To report non-conformance findings.
• Record all defects observed using the Project Completions Management System (Database) electronic punch lists.
• Monitor and check all electrical hazardous area certification related inspection work to assure compliance.
• Proactively advise where work, material or process needs to be revised.
• Use project Completions Management System database, witness, review and survey of electronic E&IC check sheets and to ensure accuracy of information recorded.
• Repair defective works on the spot where possible.
• Closeout punch list items in Completions Management System completed by Contractor/Supplier, etc.
• Witness & conduct various electrical & instrumentation testing.
• Witness & conduct FAT & SAT inspections.
• Witness & conduct PLC Panel, MCC Panel and Electrical Panels FAT
• Final document compilation and submissions.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Authorized to stop contractors’ work where quality is not being achieved.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning, and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops including Instrument Calibration, Control Valve testing, and Material inspections.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Monitoring all installation and inspection of instrumentation work with respective Quality ITPs and Checklist.
• Monitoring and inspection of Loop checking.
• Preparing inspection & test reports of completed inspections & tests.
• Preparation of final quality dossiers / test packs and maintaining backups of completed quality.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality
• Implement, maintain and verify quality system at job site as per company quality procedure and project quality plan.
• Incoming material inspection, review of certification documents and prepare inspection reports.
• Preparation of inspection test plan, review method statements related to instrumentation.
• Inspection of fabrication, installation and commissioning activities for process/electro-mechanical works related to instrumentation.
• Inspection of subcontract works – factory acceptance tests, etc.
• Third party certification of equipment /machinery related to job site.
• Preparation of inspection reports
• Review and compilation of inspection documents for final documentation.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional
• Degree in Engineering (Electrical, Instrumentation) or equivalent Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Certification/Training in Quality
• A working knowledge of Construction / Electrical / Inspection codes and practices
• The inspector shall have direct knowledge of all aspects of electrical testing such as Insulation, Resistance testing, Current and Voltage testing.
• Have a working knowledge of the National Electric Code/NFPA 70, IEC or equivalent standards.
• Shall be able to inspect complete loop checking, wiring continuity and color coding, start-up, and troubleshooting.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as assigned by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Structural aspects, you play a critical role in ensuring the highest standards of quality and compliance across engineering construction projects. Your responsibilities include inspecting structural components, ensuring compliance with project specifications, codes, and standards, and collaborating with project teams to maintain project quality and safety standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

The Quality Manager plays a pivotal role in ensuring the highest standards of quality and workmanship across all aspects of engineering construction within Gradiant projects. Responsible for overseeing quality assurance and quality control processes, the Quality Manager ensures compliance with project specifications, applicable codes, standards, and client requirements.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 15 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable
• Perform daily name screening alert clearance
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Group Head / Deputy Group Head promptly.
• Other tasks as assigned by Group Head / Team Lead
• Regular update of Procedures and Manuals to ensure the group operations is in accordance to SMBC policies, audit comments and in compliance to local as well as related overseas law and regulations
• Contribute in key initiatives and other ad hoc projects as needed

Requirements

• Bachelors degree
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office

Careers That Change Lives

We are a learning culture.  An inventive and collaborative group.  We are dedicated to making sure that every patient gets the best product — when they need it.  We have strong ties to our local communities.  Our vibrant employee communities respect and value individual experience and perspective as we aim to improve lives and the access to healthcare.

A Day in the Life

• Plans, directs, and implements all aspects of the company's design and development of new medical device products or software systems.
• May develop, evaluate, implement, and maintain technical quality assurance and control systems or reliability systems and standards pertaining to materials, techniques, or company products.
• Oversees the investigation and evaluation of existing technologies.
• Guides the conceptualization of new methodologies, materials, machines, processes or products.
• Directs the development of new concepts from initial design to market release.
• Manages feasibility studies of the design to determine if capable of functioning as intended.
• Monitors documentation maintenance throughout all phases of research and development.
• Organizes the coordination of activities with outside suppliers and consultants to ensure timely delivery.
• Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

Must Have:

• Bachelor’s degree required
• Minimum of 1 year of relevant experience

Your Profile:

• 1 – 4 years relevant experience
• Experience in leading a team and managing cross-functional teams like production, supply chain, etc.
• Experience in manufacturing or quality engineering of medical devices
• Experience working in production or operations would be a plus
• Good knowledge of ISO 13485
• Strong decision-making ability
• Good interpersonal and influencing skills

About Medtronic

Together, we can change healthcare worldwide. At Medtronic, we push the limits of what technology, therapies and services can do to help alleviate pain, restore health and extend life. We challenge ourselves and each other to make tomorrow better than yesterday. It is what makes this an exciting and rewarding place to be.

We want to accelerate and advance our ability to create meaningful innovations - but we will only succeed with the right people on our team. Let’s work together to address universal healthcare needs and improve patients’ lives. Help us shape the future.

Physical Job Requirements

The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role.

Careers That Change Lives

Engineers are indispensable to achieving our Mission. That’s why we empower you to bring the best of your experience to bear on our market-leading portfolio of innovations. Apply your existing skills and develop new ones, with the training, mentorship, and the guidance you need to continue to develop your expertise. With roles in specific business units, as well as at the corporate level, you’re sure to find an opportunity to make an impact that’s right for you.

Today, we’re partnering across the industry to confront systemic healthcare challenges – this requires bold leadership. If you want a challenging, energizing, rewarding career that changes lives, join us. Help us bring the next generation of life-changing medical technology to patients worldwide.

A Day in the Life

• Quality Improvement Projects across the sites:Lead and execute improvement projects related to manufacturing quality. Collaborate with cross-functional teams to identify areas for enhancement.
  Drive strategic initiatives aimed at elevating product quality and compliance.
  
• Core Competency Development in Quality organization:Establish and strengthen the Quality Engineering (QE) core competency within the organization.
  
  Knowledge Transfer and Teaching:Effectively transfer quality concepts and best practices to team members.
  Mentor and coach junior engineers in quality methodologies.
  Expertise in Process Validation, Process Monitoring / Statistical Process Control (SPC),Test Method Validation (TMV, Risk Management. Data analysis and Critical Thinking
  
• System Understanding:Gain a deep understanding of how the system supports various processes within the organization.
  Leverage this knowledge to drive continuous improvement.
  
  Decision-Making Authority:Make informed decisions related to quality processes and improvements.
  Serve as a consultant for critical quality-related choices.
  
  Continuous Improvement:Continuously improve existing processes and systems.
  Develop and implement innovative solutions to enhance quality outcomes.
  
• Technical Mastery:Stay abreast of global quality excellence programs, industry trends, regulations, and advancements.
  Be a technical expert in quality engineering practices.
  

Must Have:

• Bachelor’s degree required
• Minimum of 6 years of relevant experience

Your Profile:

• Bachelor’s degree in Engineering or related field (Master’s preferred)
• Certified Quality Engineer (CQE), Certified Quality Process Analyst or equivalent would be an advantage
• Six Sigma Green Belt certification would be a plus
• Significant experience in quality engineering, preferably in the medical device industry
• Strong analytical skills, attention to detail, and problem-solving abilities

About Medtronic

Together, we can change healthcare worldwide. At Medtronic, we push the limits of what technology, therapies and services can do to help alleviate pain, restore health and extend life. We challenge ourselves and each other to make tomorrow better than yesterday. It is what makes this an exciting and rewarding place to be.

We want to accelerate and advance our ability to create meaningful innovations - but we will only succeed with the right people on our team. Let’s work together to address universal healthcare needs and improve patients’ lives. Help us shape the future.

Physical Job Requirements

The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.

As a Quality Assurance (QA) Specialist in the sales and rental of used construction equipment, your role is pivotal in ensuring that every piece of machinery meets the highest standards of performance, safety, and reliability. Here's a breakdown of your key responsibilities:

1. *Quality Assessment*: Your primary task is to thoroughly inspect each piece of used construction equipment before it's put up for sale or rental. This involves conducting comprehensive checks on various components such as engine functionality, hydraulic systems, electrical systems, and structural integrity. Think of yourself as the meticulous inspector, meticulously examining every nook and cranny to ensure optimal functionality.

2. *Documentation and Reporting*: Your role involves meticulous documentation and reporting of inspection findings, ensuring transparency and accountability throughout the process. You'll collaborate closely with workshop managers, mechanics, and electricians to obtain detailed diagnostics reports and checklists for each piece of equipment. These reports serve as a comprehensive record of maintenance and repair history, highlighting any issues addressed and parts replaced. As the QA Specialist, you hold these personnel accountable for the quality and thoroughness of their work, ensuring that all repairs and maintenance tasks are completed to the highest standards. By maintaining detailed documentation and fostering a culture of accountability, you contribute to the overall reliability and trustworthiness of the equipment offered for sale or rental.

3. *Quality Control Procedures*: Implementing and enforcing quality control procedures is vital in maintaining consistency and reliability across all equipment. You'll develop and refine these procedures to streamline the inspection process while ensuring thoroughness and accuracy. Think of it as creating a standardized checklist, ensuring that no aspect of quality assessment is overlooked.

4. *Collaboration with Sales and Rental Teams*: Effective communication and collaboration with the sales and rental teams are key aspects of your role. You'll liaise closely with these teams to provide insights into equipment quality, addressing any concerns or queries they may have. Picture yourself as the bridge between the technical aspects of equipment quality and the customer-facing sales and rental processes.

5. *Customer Satisfaction and Support*: Ensuring customer satisfaction is paramount. You'll offer support to customers by providing detailed information about the equipment's condition and addressing any post-purchase or rental issues promptly. Your expertise and assistance contribute significantly to building trust and fostering long-term relationships with clients. Consider yourself as the reliable point of contact, ready to assist customers at every step of their journey.

6. *Continuous Improvement*: Striving for continuous improvement is ingrained in your role. You'll actively seek feedback from stakeholders, identify areas for enhancement in the inspection process, and propose innovative solutions to optimize efficiency and effectiveness. This ongoing pursuit of excellence ensures that the quality of equipment and service continually evolves to meet and exceed customer expectations.

In summary, as a QA Specialist in the sales and rental of used construction equipment, you play a pivotal role in upholding the highest standards of quality, ensuring customer satisfaction, and driving continuous improvement in processes and procedures. Your attention to detail, technical expertise, and collaborative approach are instrumental in the success of the business.

*Requirements:*

Minimum Diploma in Mechanical / Manufacturing / Quality Management.

Minimum 1 year working experience

Acceptable communication and interpersonal skill and ability to communicate with all levels

Good understanding of technical drawing

Responsibilities:

• Manage the HACCP pre-requisite programs and review periodically their effectiveness in mitigating microbiological contamination risk. Revise as required for continuous improvement.
• Work with Cross functional team for FDA audit preparation.
• Worked with plant team, special cleaning activities eg. sanitation break.
• Establish and manage the pest control programs for the plant, collaborate closely with the Pest Control Service provider.
• Participate in internal HACCP/GMP and Quality audit programs.
• Support in OE/Engineering improvement projects to ensure compliance to food safety and hygiene requirements.
• Support Procurement team to ensure existing and new material suppliers meet our Food Safety and hygiene requirements.
• Support warehouse and third-party warehouse service provider to meet our Food Safety requirements and ensure material storage compliance. Participate in facility audit for cGMP, pest control and hygiene as required.
• Coordinate and facilitate activities to maintain and continuously improve plant hygiene standard.
• Establish and manage the hygiene monitoring program for production, warehouse, utilities and adjoining areas, with established test points, sampling frequency and acceptance criteria.
• Review and revise current plant hygiene zoning policy to mitigate physical and microbial product and chemical contamination risks, personal and material traffic flow, gowning and shoe change policy.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures. Continuously benchmark or seek best practice in plant and equipment cleaning protocols.
• Evaluate and approve cleaning accessories and disinfectants used in sanitation procedures.
• Audit cleaning systems and procedures and recommends correction of unsanitary conditions.
• Define scope of works and establishes standards and measures of cleaning effectiveness for third party janitorial services for the plant.
• Implement plant wide programs and activities as communicated by site management and regional/global quality, through effective and cost-efficient hygiene and sanitation programs to mitigate microbiological risks.
• Initiate alignment discussions with operations manager and project engineers for plant improvements on hygiene engineering concepts. Validates and ensures that new projects comply with basic hygiene engineering standards.
• Monitor equipment, building, and grounds for routine and non-routine maintenance/repair for GMP compliances and hygiene engineering concepts in accord with Global guidelines.
• Facilitate initial training (and refresher training) to plant personnel on cGMP (HACCP), hygiene programs, and sharing of significant microbial and hygiene learning to prevent recurrence.
• Perform other tasks, roles or projects that may be assigned by Assistant manager Plant hygiene & Food safety Provides guidance and maintenance of Food Safety System (HACCP), and to maintain and continuously improve plant hygiene standard through ensuring compliance to food safety and hygiene requirement.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures.

Requirements:

• Minimum Diploma in a scientific or technical discipline (Chemistry, Food Science, Microbiology or related) preferred or with equivalent skills and experience.
• Working experience in a Nutritional GMP manufacturing environment preferred. Experience in manufacturing of infant/ follow-up formula/ pharmaceutical will be of advantage.
• Understands quality systems, HACCP which includes environmental monitoring program, pest management program, sanitation program and other pre-requisite programs.

Job Purpose

The incumbant is responsible for improving revenues by reducing bad debt exposure through the direct management of credit terms

Responsibilities

• Efficient Management of Drivers and Corporate Accounts’ Debts
• Ensure the Key Performance Indicators (KPI) of Credit Control are met
• Monitor and control drivers and corporate client accounts’ outstanding.
• Responsible in contacting customers and send reminders to ensure timely payments.
• Negotiate repayment plans with customers and set payment terms and conditions accordingly.
• Conduct aged balance review with Superior and follow up review actions.
• Report and alert any exceptional and delinquent customers and apply appropriate actions to minimize bad debt.
• Prepare daily operation report(s).
• Administer litigation/credit monitoring and screening process
• Ensure compliance with financial policies and procedures.
• Manage and review repossession and external collection agencies’ performance.
• Attend to drivers’ queries and appeals relating to Credit Control matters

Qualifications & Work Experience

• Diploma or other equivalent qualification (Diploma in Business related discipline will be added advantage)
• At least 2 years of experience in credit control
• Prior experience in taxi and/or car rental industries is advantageous
• Candidate who possess a valid Class 3/3A Driving License will be an added advantage
• We seek Mandarin/Malay-speaking candidates as the incumbant will be required to serve Mandarin/Malay-speaking clients
• Excellent mathematical ability
• 5-days work week.

Skills

Technical skills include:

• Proficient in MS Office (especially MS Excel Vlookup, Pivot Tables and functions formulas)

Generic skills include:

• Meticulous and possess strong organising and numerical skills.
• Result-oriented and able to work on tight resources and datelines
• Strong negotiation and writing skills
• Excellent team player
• Customer service oriented with good interpersonal and communication skills
• Ability to work in fast pace and dynamic environment

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Conduct checks on food products, storage(Freezer, Chiller and Ambient) and processing facilities.
• Check on incoming products and conduct receiving.
• Maintain operational hygiene standards in accordance to ISO and HACCP requirement
• Perform daily inspection on sanitation, hygiene, food safety and quality aspects of the factory.
• To work under company QA and assist with related issues.
• Printing Pre-Set Labels for food products
• To Work with Export Co-ordinator on operational requirements for export shipments.

- OT Available. Basic + OT Up to $4000!

- Lunch Provided

- Dinner Provided (if OT)

- 5 1/2 Days Work Week.

ob summary:

Perform checking on incoming materials, finished products, production line. Plan and liaise with relevant departments to execute projects, non routine testing etc. Assist Manager in audits.

Job responsibilities:

• Liaise with relevant department on incoming materials schedule and perform the relevant checking.
• Review COAs to ensure conformity of the raw materials and packaging materials before use
• Conduct production line checking
• Complete finished products checking on time
• Perform microbial checking on the raw materials, packaging materials, water samples from line and finished products.
• Assist in data collection and investigation when non conformance occur.
• Support in non routine testing and project
• Ensure all equipment are calibrated and in good working condition.
• Liaise with testing lab on external testing

Requirements to excel in this position.

• Minimum diploma and degree (Certified in Food Science and Technology or its equivalent)
• Able to work independently or as a team
• Good analytical skills, detailed person
• Good communication and written skills.
• Willing to learn
• Proficient in Microsoft Office

- Able to start work immediately or at short notice would be preferred

We regret that only shortlisted candidates will be contacted.

Job Purpose:

Assist the development of the SQE department by contributing to the daily QA operation and maintaining the high level of efficiency for all new models and engineering changes. Provide strong impetus to support continuous improvement in view of meeting all relevant KPIs for the company. Provide a framework with clear structure to build on the need to standardise and implement systems for greater clarity and efficiency. Focus on ensuring that good quality is evident in all aspects of production and serving as the extra confirmation for client products.

Key accountabilities:

1. Review the daily operation activities in the control for quality aspects.
2. Focus and ensure that the in process and outgoing quality metrics are met.
3. Execute the scheduled projects within the approved time frame.
4. Prepare and execute WI for the lines and provide training for the operators.
5. Prepare the engineering evaluations for DOE for new engineering changes.
6. Perform daily, weekly and monthly reporting to the customer and management.
7. Perform QA functions and conduct quality investigations and provide CAR.
8. Conduct client's audits and provide CAR for audit findings.
9. Provide and analyse daily line quality KPI and provide improvement plans for the quality aspects on the line.
10. Provide Customer Satisfaction reports on a monthly basis and provide solutions for quality and time factors.
11. Reconfirm and serve as the final judge for all inspection guidance issues seeking customer approval if necessary.
12. Complies with all safety policies and procedures.

Knowledge, Skills & Experience:

1. Degree or Diploma in Engineering (Mechanical or Electrical).
2. Fresh-entry or 1 year experience with quality background.
3. Strong analytical, negotiation, communication and presentation skills.
4. Excellent interpersonal skills with a high level of self-confidence, drive and motivation.

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.
• 6 Days work week - Working location at project site office, Tampines area.