Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Quality Assurance Team

Reports to: Senior QA Engineer

Function: Global QA

Work Location/Site: Singapore / GHQ

Internship Duration: Any 3 months between January to May 2025

Role Overview

The QA intern will support the quality and various project teams with validation needs in MasterControl, our cloud-based Quality Management System (QMS) for HSO.

Duties and Responsibilities

• Assist to perform validation duties to ensure software validation project and corresponding deliverables adhere to current regulations and quality standards
• Actively contribute towards continuous improvement of the quality team by suggesting new ideas and promoting innovative culture through improving and optimizing analysis of quality data and process workflows
• Provide support to record management and archiving activities
• Support post-migration and improvement activity works for the QMS
• Assist with QMS Modules improvement and maintenance activities
• Participate in team activities and initiatives related to QMS and regulatory requirements
• Other duties as assigned

Requirements

Experience

• N/A

Skills/Accreditations

• Microsoft office skills essential. Candidates with Excel Macro skills preferred
• Some Quality system knowledge will be advantageous
• Self-awareness and Good work ethics
• Strong communication and interpersonal skill

Academic Qualifications

• Pursuing Diploma or Degree Preferably in Science or Engineering

Travel requirements

• N/A

By submitting your application, you agree that your personal data will be collected, disclosed, and retained by HOYA Group for assessing suitability for employment and verification purposes.

We regret to inform you that due to the number of applications received, only shortlisted applicants will be notified. Thank you for your kind understanding.

Mission

• Plan and implement the Project Quality Management System (PQMS) activities within the project and organization.
• Plan and ensure the project Quality Control (QC) activities implementation
• Report Quality information and data about Project in line with Corporate Guidelines
• Act as focal point for quality related matters within the project and in liaison with external entities.
• Act as Auditor Lead for ISO matters.

Major Duty and Tasks

• Ensure the definition and implementation of the PQMS and the identification, preparation and distribution of needed Project Quality Plans and procedures in accordance with the Company and External Parties Quality Management System (QMS)
• Ensure that the integrity of the Company QMS is maintained when changes are made to the system for the project
• Ensure that the correct implementation of the Project QMS is checked and monitored through the planning of quality audits
• Ensure that the correct implementation of planned quality audits, taking in account all project processes, including the issue of relevant audit reports
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Conduct external audit to Vendors and Subcontractors QMS and ISO requirements
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Plan and allocate Quality resources to the various area of the project, managing them in liaison with involved Quality functions
• Support the Project Manager in relations with the Client and with the Authorities responsible for quality matters
• Participates to Project Management meetings, to ensure coordination between Quality activities and Project Management activities
• Ensure the preparation and issue of QC specifications for the works, coordinating and agreeing the checks by the Technical Departments and Client
• Ensure the issue of quality requirements to be incorporated, in the contractual documents, with Vendors and Subcontractors and organizations in charge of works
• Ensure the Site QC activities implementation, including the monitoring of QC management tool updating
• Ensure management of nonconformities
• Promote appropriate actions in order to prevent or eliminate potential non-conformities and their causes
• Ensure the management of Cost of Non Quality process
• Ensure knowledge and awareness of Quality requirements within the Project Team, also performing Quality Training activities
• Collect and analyse project quality data also to organize and lead the Project Quality Management Review
• Ensure the management of lessons learned process
• Ensure Customer satisfaction process implementation
• Report Project information and data to Company's Quality Manager by means of Corporate methodologies and tools and keep the Project Quality Reporting tools updated.
• Providing leadership, mentorship, and direction of all QA/QC personal.

Additional Requirements

• Ability to read PID’s and Isometric drawings.
• Understand NDT techniques.
• Experience with Ferrite and PMI techniques
• Knowledge of WPS/PQR activities
• Knowledge of Painting
• Familiar with AWS/ASME/ANSI codes and standards
• Experience with general Oilfield fabrication products
• Maintain the required test records and update accordingly.
• Conduct incoming and outgoing inspection activities such as inspecting the final output, comparing it to the requirements, and approving or rejecting the final products.
• Monitor the welding, NDT and etc activities.

Requirements:

• Diploma/Degree in relevant/related fields
• Min 10 years of QC inspection experience for Water, Oil and Gas fabrication
• Inspection Qualifications eg: CSWIP or equivalent
• Able to communicate with various level of people
• Good in verbal and written English
• General computer knowledge is essential (MS word, excel, powerpoint, MS outlook)
• Willing and able to travel overseas

Primary Purpose

Reporting to the Senior Manager, Supply Chain SMO/COE, the Master Data Quality & Governance Manager plays a vital role in ensuring the accuracy and integrity of master data and will be responsible for overseeing and implementing data governance strategies, policies, practices, and processes across the Asia Pacific region. This role is also responsible for collaborating with APAC business stakeholders to understand their data needs and requirements and ensuring data quality standards, processes and procedures align with business objectives, and providing training and support to business stakeholders on data quality best practices.

Develop and Implement Data Governance Framework:

o Design and establish a comprehensive data governance framework across the Asia Pacific region.

o In partnership with Global Data Governance teams define data governance policies, procedures, and standards to ensure consistent and accurate data management practices.

o Collaborate with stakeholders to gain buy-in and support for the data governance initiatives.

Data Stewardship and Ownership:

o Establish data quality rules, monitor data compliance, and resolve data-related issues.

o Ensure data ownership and accountability by establishing data governance and execution roles and responsibilities.

o Drive continuous improvement by monitoring data governance performance and identifying opportunities for enhancement.

o Conduct regular data audits and assessments to identify gaps and recommend corrective actions.

o Collaborate with cross-functional teams, including IT, finance, operations, privacy and legal to ensure alignment and compliance with data governance initiatives.

o Engage with global stakeholders to share best practices, leverage synergies, and contribute to the overall data governance strategy.

Training and Awareness:

o Develop training programs and materials to educate employees on data governance policies, procedures, and best practices.

o Raise awareness of the importance of data governance and its impact on business operations and decision-making.

o Provide guidance and support to business units in implementing data governance practices effectively.

o Act as a subject matter expert, providing guidance and support to stakeholders on data governance-related matters.

Inherent Requirements

Formal Qualifications

Bachelor's in information management, computer science, business administration, or a related field.

Key Skills / Core Competencies

• Strategic thinking ability, as well as detailed analytical and problem-solving skills
• Strong communication and relationship building skills to collaborate cross functionally with internal partners and external customers.
• Comfort in managing relationships with senior leadership.
• Strong entrepreneurial, customer service orientation.
• Ability to effectively prioritize, execute tasks and manage deadlines in a high-pressure environment.
• Good written, oral, and interpersonal communication skills.
• An ability to work well in an ambiguous environment with minimum supervision.
• Strong professional presence and business acumen.
• Innovative, proactive, and flexible to change.
• Self-motivation and a strong sense of ownership and accountability
• Exposure to process improvement methodologies with Lean Six sigma Green or Black belt an advantage

Experience

• Proven experience in data governance, data management, or related roles, preferably within a multinational organization operating in the Asia Pacific region.
• In-depth knowledge of data governance frameworks, principles, and best practices.
• Strong understanding of data quality management, data privacy regulations, and data-related compliance requirements.
• Demonstrable experience leading process change
• Superior vendor management experience
• Demonstrable knowledge and experience in SAP, SFDC, M365, BI and data analysis tools.

Responsibilities

• Conduct daily reviews of transaction filtering and screening to ensure compliance with policies and regulatory standards.
• Perform sampling of cleared alerts to assess the accuracy and quality of the adjudication.
• Gather and analyze data to spot trends, recurring issues, or inefficiencies in the filtering process.
• Document findings and assisst in generating reports for manager and stakeholders.
• Work with the filtering team to provide feedback and identify areas of improvement in processes and controls.
• Collaborate to improve workflow, suggest enhancements, and support the implementation of corrective actions.

Requirements

• Bachelor's Degree
• 2 years of experience in the banking industry with some exposure to screening process.
• Understanding of financial crime and money laundering risks.
• Strong attention to detail with ability to identify discrepancies and trends in large sets of data
• Ability to work collaboratively in a team environment and take direction from senior team members.
• Experience with compliance or AML tools such as World Check, Fircosoft, or other filtering and screening system is a plus.

Job Duties:

• Manage the process for QMS audits, to ensure compliance of the organization’s Integrated Management Systems wrt ISO9001/TS16949/ VDA 6.3, Customer specific requirements.
• Identify areas/ system gaps for improvement and implementation. Establish and drive QMS enhancement and integration roadmap/milestones.
• Work closely with Operations and key stakeholders to maintain consistent manufacturing, quality policies and compliance
• Responsible for maintaining/improving fab performance though SPC program.
• Investigate root causes and resolve key fab-related quality issues and effectiveness of corrective and preventive actions. Manage Non-Conformance cases with respect to on-time closure with the relevant customers/Business Lines.
• Responsible for Outgoing and Periodic review OQA performance to drive defect reductions
• Responsible for Document Centre Management & Library Services
• Management of change among diverse cultures in a fast paced environment
• Co-work with related functions to support the wafer fabrication process to drive process/system optimization and effectiveness

Job Qualifications:

• Degree in Chemical / Electrical Engineering / Physics / Chemistry or equivalent
• 8+ years in semiconductor industry preferred
• Knowledge of wafer fabrication process essential
• Strong in project management skills, facilitation, analytical skills and system thinking

Responsibilities

• Conduct daily reviews of transaction filtering and screening to ensure compliance with policies and regulatory standards.
• Perform sampling of cleared alerts to assess the accuracy and quality of the adjudication.
• Gather and analyze data to spot trends, recurring issues, or inefficiencies in the filtering process.
• Document findings and assisst in generating reports for manager and stakeholders.
• Work with the filtering team to provide feedback and identify areas of improvement in processes and controls.
• Collaborate to improve workflow, suggest enhancements, and support the implementation of corrective actions.
• Present findings to senior managers and stakeholders, highlighting both successes and areas needing attention.
• Prepare weekly and monthly report that summarize team activities and quality metrics.

Requirements

• Bachelor's Degree
• Minimum 3 years of experience in the banking industry with some exposure to screening process.
• Understanding of financial crime and money laundering risks.
• Strong attention to detail with ability to identify discrepancies and trends in large sets of data
• Strong communication skills to effectively report findings to manager and stakeholders.
• Ability to work collaboratively in a team environment and take direction from senior team members.
• Experience with compliance or AML tools such as World Check, Fircosoft, or other filtering and screening system is a plus.

Job Decription:

• Attend to customer quality issues.
• Improve manufacturing processes and products
• Provide quality services to ensure compliance with the quality system
• Achieve quality targets of products

Requirements :

• Diploma / Degree in Engineering
• No Experience are required
• Good interpersonal and communication skills
• Proficiency in spoken and written Chinese is required to deal with Chinese stakeholder

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Responsibilities

• Oversee and provide guidance to QC Inspection Team to ensure implementation of all inspection-related activities according to standards, including proper disposition and handling of non-conforming material/product.

- Pre-inspection of designated goods (at warehouse).

- Sampling and QC inspection of incoming materials (pre-shipment samples, raw materials, bulk, semi-finished and finished products, packaging materials) and out-going products.

- In-process inspection to ensure that quality, hygiene, and safety standards are met.

• Identify and investigate OOS (out-of-specification) or NC (non-conformance) cases, analyse the root causes, and monitor closely the resolution and correction status.
• Investigate product feedbacks, analyse quality-related problems, and recommend problem resolution.
• Handle product stability tests.
• Work with relevant parties (e.g. external provider and product owner) to establish specifications and quality attributes of raw material, packaging and product, confirm appropriate test method for each QC parameter, and document evidence.
• Contribute for establishing and improving relevant QC SOP and inspection/testing-related work instructions (in compliance with GMP and ISO requirements).
• Ensure proper QC documentation including Master Specifications, QC Records (including electronic logs), QC Test Reports, Lab Test Reports, Non-Conformance Reports, COA etc.
• Ensure cleaning and environmental monitoring programmes for the site are done accordingly.
• Manage retention room for retention, reference and post-inspection samples, and sample retention system.

Requirements

• Degree in Science or Engineering (preferably in Cosmetic Science, Chemistry, Pharmacy, Nutrition or relevant field).
• Preferably 1-3 years of experience in the quality control of cosmetics, pharmaceuticals, dietary supplement, food, or skincare/medical device.
• Experience in a GMP environment or knowledge of GMP an important plus.
• Knowledge of relevant product standards, quality control and test methods.
• Stringent compliance to procedures, guidelines, standards, and regulations.
• Self-starter, good at working well independently with initiatives.
• Meticulous & detail oriented.
• Analytical & problem-solving skills.
• Time management skills (scheduling, prioritising) to meet deadlines.

About the Role:

This position has responsibilities for the deployment and standardization of key Quality Assurance activities including assurance of product quality, quality planning process, and maintenance of Quality Management System performance. This role will carry out responsibilities in strict adherence to regulatory requirements and applicable standards relevant to medical device, and always act with focus on quality objectives within the organization.

Roles and responsibilities:

• Functional lead for implementation, managing operational effectiveness of Complaint Handling process, trending activities, and analysis of data associated with defined KPIs.
• Responsible for monitoring and implementation escalation process and resolution for late medical device reports caused by late entries by local intake team.
• Analyze and recommend complaints received are reportable within the market, ensure adverse events reported to Authority if needed, with special attention to managing complaint-adverse event with close follow up with manufacturer and/or reporter.
• Execute, coordinate and feedback Field Corrective Action/Recalls with the countries, maintain tracking to monitor field actions in the region to ensure effective resolution or closure. Report Field Corrective Action to Authority if needed.
• Support audit readiness, conduct and prepare for regulatory/external audits as well as internal quality audits to ensure timely execution according to defined schedule.
• Participate of Nonconformity, Corrective and Preventive Actions, Documentations, Supplier Quality across the organization.
• Develop/update procedures for quality system processes to ensure alignment with Olympus global procedures as well as coordinate with other departments that effect Quality Systems.
• Provide training and support to employees concerning quality systems, policies, procedures, and core processes etc.
• Support global and local quality improvement initiatives and transformative projects.
• Execute other tasks and projects, as assigned by Manager.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Bachelor’s degree in related field of engineering, science, or equivalent discipline.
• At least 5 years of experience working in similar position of responsibility in the medical device quality field
• Prior experience in managing quality management system in a medical device environment and quality assurance/regulatory compliance
• Must have knowledge to perform quality audit, certified auditor in ISO13485 or GDPMDS will be a plus.
• Strong knowledge of quality system requirements and medical device regulatory framework
• Meticulous and strong attention to details
• Excellent verbal and written communication skills
• Good problem solving and ability to drive change within organization
• Ability to succeed in a fast-paced, matrixed environment with speed, accuracy and adaptable to meet business need
• Positive attitude and able to work well as team player

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

• LinkedIn - Olympus APAC
• Company website - www.olympus.com.sg

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable.
• Perform daily batch name screening alert clearance.
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Team Lead / Deputy Group Head / Group Head promptly.
• Prepare reports that summarize team activities and quality metrics.
• Collaborate to improve workflow, suggest enhancements, and support the implementation of improvement actions.
• Other tasks as assigned by Group Head / Team Lead.

Requirements

• Bachelors degree
• Minimum 3 years of experience in the banking industry with exposure to AML Screening and/or Trade AML
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening.
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and operation team.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. WU Zhe, on several research projects of optimization of chemical and manufacturing processes through machine learning tools
• The Research Fellow will help to develop both theoretical and simulation study of machine-learning-based control and optimization algorithms to chemical processes.

Job Requirements

For Research Fellow Position:

• A PhD degree in a relevant area, e.g., Control Engineering, Chemical Engineering, Automation, Systems Engineering, Computer Science or Applied Mathematics;
• Good publication record;
• Experienced in advanced process control, machine learning, and programming languages (e.g., python, Matlab, C++, etc)

• Read and interpret engineering drawings to identify dimensions, tolerances, and other specifications.
• Perform quality checks using measuring tools and gauges to ensure components and assemblies meet the required specifications.
• Visually inspect camera assemblies at various stages of production, following defined quality control procedures and checklists.
• Operate test equipment to verify functionality of cameras, following work instructions.
• Identify and document any defects or non-conformities, recording detailed information for corrective action.
• Work collaboratively with production personnel to identify and resolve quality issues.
• Maintain accurate inspection records in Excel spreadsheet and complete necessary paperwork.
• Assist with the implementation of quality improvement initiatives.
• Assist Production Team with assembly or rework of cameras when needs arise.

Requirements

• Minimum Diploma holder
• Salary will depend on relvant experiences and qualification

Job Description & Responsibilities:

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Work with technical team to create quality document related to product design, development and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Develop and evaluate medical device regulatory intelligence and maximize opportunities to expedite the registration process within S.E.A region, China and USA. Activities include obtaining and maintaining domestic and regional market access for our innovative products.
• Provide appropriate inputs to assist in defining regulatory strategies and timelines for regulatory submissions for the total product lifecycle for medical devices.
• Compile technical, clinical and production protocols and documentations necessary for new products dossier submission to S.E.A. region, China and USA. regulatory submissions. Liaise with technical team (locally and internationally) on technical information required to prepare submission dossiers. Manage preparation (developing submission content, management of document legalization, and creation of any other documents required for submissions) and maintenance of regulatory submissions and other premarket registrations to acquire appropriate commercial distribution clearances in accordance with regulatory strategic plan.
• Overall responsible for ensuring that medical device files are set up in compliance to regulatory requirement.
• Monitor and communicate new and changing medical device law, guidance regulations in a timely manner. Reviews process change recommendation and assists in implementing new procedures and documentation.
• Ensure that regulatory records are controlled and maintained.
• Train internal and external stakeholders on regulatory data management processes and platforms, regulatory matters and product registration.

Job Requirements:

• Master or Bachelor of Science/Engineering with strong background in biomedical, computer or engineering sciences.
• Possess 3 years or more of working experience in quality assurance and regulatory affairs in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge of Health Sciences Authority requirement for IVD product submission.
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Experience with product registration submission and evaluation.
• Experience with maintaining internal regulatory database.
• Experience with Dossier Creation.
• Ability to develop and implement plans for regulatory submission.
• Awareness of applicable workplace environment, health and safety regulations.
• Ability to network and build strategic partnership with good problem solving skills and communication skills.
• Possess leadership and agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• To review, develop, implement, monitor and evaluate key performance indicators in alignment with Department of Nursing's set targets.
• Prepare and conduct audits to improve the standards of nursing image and care quality.
• Coordinate and faciliatate root cause analysis sessions for incidents related to Nursing Department.
• Work closely with NDNQI coordinator and indicators' owners to facilitate the collection and submission of NDNQI data.
• Educate nurses about CGH Nursing's Professional Practice Model, the concept of shared governance and Nursing Council.
• Maintain a continuous improvement mind-set to seek evidence-based practices through research.

Job Requirements:

• Possess a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Nursing or equivalent.
• Advanced diploma / post-basic certificate in any discipline for the Senior Staff Nurse position
• Registered with the Singapore Nursing Board

Only shortlisted candidates will be notified.

RESPONSIBILITIES

• The role involves planning, coordinating, and implementing standards development projects under the national standardization programme administered by Enterprise Singapore.
• Provide secretariat support to the Technical Committees and Working Groups. This includes preparation of agendas, meeting minutes, report compilation, drafting of standards, etc.
• Engage and coordinate with the industry, academia, and government organizations to facilitate the development, promotion, and review of Singapore Standards and Technical References.
• Organizing key standard launches events and other outreach events.
• Collaborate with key stakeholders to identify, develop, and launch new standards. This includes conducting consultations and ensuring that standards are aligned with industry needs.
• Assist in the industry and technical research for the development of new/review of standards. Conduct verification studies to identify users of the standards.
• Handle inquiries regarding standards in your area of responsibility, ensuring prompt and accurate responses to stakeholders.

Requirements

• Minimum Diploma qualification/ Fresh gradustes are welcome to apply
• Preferably with at least three (3) years of relevant work experience in safety or manufacturing related field
• Preferably with secretariat experience
• Min. 3 years of experience in quality, safety or manufacturing industry is advantageous
• Results-oriented and able to manage and execute projects in a team and independently.
• Possess good interpersonal skills and work well with various stakeholders
• Good writing and communication skills.
• Proficiency in Microsoft Word, Excel, PowerPoint, and other productivity tools

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

About Us:

We are the independent expert in assurance and risk management. Driven by our purpose, to safeguard life, property, and the environment, we empower our customers and their stakeholders with facts and reliable insights so that critical decisions can be made with confidence.

As a trusted voice for many of the world’s most successful organizations, we use our knowledge to advance safety and performance, set industry benchmarks, and inspire and invent solutions to tackle global transformations.

About SCPA

We help our customers respond to the increased demand for trust and transparency around products, assets, supply chains, and ecosystems, driving the transformation of the assurance industry. Whether certifying products, sharing claims or optimizing and decarbonizing supply chains, DNV helps companies manage risks and realize their long-term strategic goals, improving ESG performance and generating lasting, sustainable results. Drawing on our wide technical and industry expertise, we work with companies worldwide to bridge trust gaps among consumers, producers and suppliers.

We are looking for a Senior assessor to drive the growth of our Product Assurance business. In this role you will be responsible for assessing, inspecting and testing equipment, components and systems to customer or project specifications, and international regulations or standards like PED, CPR (steel), MD, EN 1090, ISO 3834, Welding standards, etc. In this position you will have a chance to interact with customers both external and internal, and actively participate in the section's effort towards efficiency and digitalization.

About the Role:

Responsibilities include:

• Proactive selling of our services across all domains of the business in South East Asia (SEA)
• Manage, perform, and deliver product certification and inspection activities
• Assist in preparation of customer proposals
• Provide technical guidance to customers and scoping the project with customers
• Project planning
• Complete end to end execution of the project in a timely manner with high quality.

About You:

• Graduate in Mechanical / Metallurgy engineering with 10+ years of experience in manufacturing industry.
• Qualified ISO9001 LA and IWE / IWT essential
• Experience of working with Certification or Notified Body of International Repute desirable.
• Sound Marketing Intelligence in the Inspection and Product Certification domain.
• Qualification as per PED /CPR/ ISO 3834 desirable.
• Qualified Level II for various NDE techniques.
• Sound knowledge of ASME, ASTM, EN and other related standards
• Familiar with manufacturing processes and knowledge of stage wise and final inspection of fabrication equipment, structural component, pipes, tubes, casting, forging and various mechanical component.
• Prior experience in executing small to large third party Inspections of Infrastructure, Mechanical, Electrical & Instrumentation, Civil, projects stretched over periods / months, successfully.
• Prior experience in leading Project kick-off meets, project document reviews, ITP/ QA Plan approvals, Construction procedure approvals, document MOMs, others as appropriate.
• ISO 17020/ ISO 9001 and related management systems exposure desirable. Preferably a QMS Auditor enabling vendor audits/ assessments.
• Safety conscious and enforce safe work practices.
• Good written and communication skills
• Able to work independently and in a team with good initiative
• Ability to interact and cooperate across other cultures.

Skills include:

• Sound Technical Knowledge
• Problem solving approach.
• Customer centric and managing a good customer relationship.
• Timely delivery of projects with high quality standard.

What we Offer:

• Flexible work arrangements for better work-life balance.
• Guaranteed Annual Wage Supplement.
• Generous Paid Leaves (Annual, Compassionate, Marriage, Maternity, Paternity & shared parental leave, Adoption leave, Childcare & Extended Childcare Leave, Examination leaves, National Service (NS) leave, medical leave, Prolonged Illness leave).
• Medical benefits (Clinical treatment, Emergency Medical Services, Specialist Consultation, Paediatrician Consultation, Inoculations (Hepatitis, H1N1 & Flu), Dental Treatment, Annual Medical Examination, Hospitalization & Surgical Benefits).
• Maternity Benefits.
• Pension and Insurance Policies (Central Provident Fund, Group Term Life Assurance, Group Personal Accident Insurance, Travel Insurance, Work Injury Compensation Insurance).
• Training and Development Assistance (Training Sponsorship, On-The-Job Training, Training Programme).
• Additional Benefits (Long Service Awards, Professional Membership, Gym Subsidy, Mobile Phone Reimbursement).
• Company bonus/Profit share.

*Benefits may vary based on position, tenure/contract/grade level*

DNV is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to gender, religion, race, national or ethnic origin, cultural background, social group, disability, sexual orientation, gender identity, marital status, age or political opinion. Diversity is fundamental to our culture and we invite you to be part of this diversity.

Responsibilities:

• To assist to liaise and co-ordinate with LTA, authorities, Consultants and stakeholders.
• To ensure risk assessment and safe working procedure are properly executed on site.
• To conduct daily health, safety and environmental inspections, prepare reports and follow up with Project Safety Team.
• Ensure compliance with environmental regulations, develop environmental control plan & liaise with NEA (such as report submission, etc.).
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence.

Requirement:

• At least 5 years relevant experience in construction for LTA projects.
• NEA registered ECO.
• Able to work independently with minimal supervision.
• Able to ensure compliance with the latest environmental regulations.

Job Responsibilities

• Work closely with all production team on the production process and oversee the day-to-day operations to ensure compliance with AVA, NEA HACCP guidelines and ISO standards
• Perform the creation and revision of corporate level quality documents that support GMP operations to ensure compliance with GMP guidelines
• Assist to contribute to the maintenance and continuous improvement of the Record Management systems and processes
• Assist to conduct regular risk assessment of corporate compliance against ever-changing Food Safety regulation to identify and work with relevant technology to develop mitigation plan
• Assist to develop Food Safety and Food Defends related standards
• Assist to develop Food Safety and Food Defends training materials
• Assist in driving the implementation of the Food Safety and Food Defends system and prerequisite program ingredient
• Conduct impact assessments and updates to QMS policies
• Manage QMS Management Review meetings according to local SOPs
• Maintain ISO / HACCP documentation and monitoring records update
• Handle all related operations audits
• Work closely with Marketing/ Sales and Production in packaging artwork development by providing product technical information eg. ingredient listings, nutrition labels that comply with labelling regulations of sales countries
• Update internal and external customers on the status of the quality issues
• Assist to ensure appropriate corrective and preventive actions are taken to eliminate detected non-conformance and the causes
• Provide Technical support to Marketing, R&D, Sales & Operations and Business Development teams in terms of product information enquiries from customers and country customs
• Other duties as assigned by the Head of Department

Job Requirements

• Able to communicate with all level and good interpersonal skills
• Knowledge in food labelling regulatory requirements pertaining to product claims, ingredient listing, nutrition labelling and etc.
• Meticulous with good attention to details and an effective change agent

Education, Experience & Training

• Min. Diploma/Degree in Food Technology, Food Science or its equivalent qualifications
• At least 1 year of experience working in SME food manufacturing environment
• With minimum 2 years in Quality Assurance or Quality Management, preferably in Food Industry
• Knowledge of HACCP, ISO22000 & GMP requirement will be advantage

Job Description

At Citi, we get to connect millions of people across hundreds of cities and countries every day. And we've been doing it for more than 200 years. We do this through our unparalleled global network. We provide a broad range of financial services and products to our clients – whether they be consumers, corporations, governments or institutions – to help them meet their biggest opportunities and face the world's toughest challenges.

Shape your Career with Citi

Citi’s Markets business provides world-class solutions and an unmatched global presence. We serve corporates, institutional investors and governments from trading floors in almost 80 countries. The strength of our underwriting, sales and trading and distribution capabilities span asset classes and currencies, providing us with an unmatched ability to meet the needs of our clients

We’re currently looking for a high caliber professional to join our team as Officer, Markets Operations Control - Hybrid (Internal Job Title: Securities & Derivatives Analyst 1 – C09) based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.
• We believe all parents deserve time to adjust to parenthood and bond with the newest members of their families. That’s why in early 2020 we began rolling out our expanded Paid Parental Leave Policy to include Citi employees around the world.
• We empower our employees to manage their financial well-being and help them plan for the future.
• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.
• We offer our employees resources and tools to volunteer in the communities in which they live and work. In 2019, Citi employee volunteers contributed more than 1 million volunteer hours around the world.

In this role, you’re expected to:

• Ensure compliance with global and regional functional policies with focus on Operational Risk, Manager’s Control Assessment (MCA), Information Security and Records Management.
• Perform Records Management related activities.
• Perform access reviews for the supported businesses.
• Manage Outsourcing related reviews and reporting in line with the requirements outlined by the Third-Party Management Policy.
• Perform MCA testing of the Business activities.
• Perform process reviews and provide recommendations for improvement and automation.
• Manage documentation of Continuity of Business Plans.
• Participate in and/or lead projects as assigned.
• Escalate transaction processing issues to the appropriate channels and collaborate on a solution.
• Design and analyze moderately complex reports, in coordination with standards set by direct leadership.
• Ensure processes adhere to audit and control policies.
• Perform regulatory controls, account reconciliations, and record retention activities in accordance with established policies.

As a successful candidate, you’d ideally have the following skills and exposure:

• Relevant experience preferred.
• Fundamental understanding of Treasury products, accounting and regulatory policies.
• Proven ability to perform various concurrent activities/projects in a high-risk environment.
• Demonstrated knowledge of macros.
• Consistently demonstrate clear and concise written and verbal communication skills.
• Bachelor’s Degree/University degree or equivalent experience in Business, Accounting or Finance
• Basic understanding of Treasury Products and Accounting
• Ability to perform various concurrent activities/projects in a fast-paced environment
• Ability to work under pressure and manage deadlines
• Consistently demonstrate clear and concise written and verbal communication skills
• Attention to detail and intermediate problem-solving skills

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei