As a Motion Control Engineer of Halliburton Wireline Technology team, under broad guidance, you will be responsible for Motion Control firmware design and development of new product and enhancements, verify and validate firmware through integrated testing at module, product and system levels. You’ll also be involved in field testing support, manufacturing release roll-outs of the new products.

Job Roles

- Analyse system & subsystem motion control requirements, identify firmware features, break down task lists and provide schedule estimations.

- Lead and implement board level firmware development, debugging and testing activities including algorithm, communication, and system firmware development.

- Participate in board, product and system level product integration, verification and validation. You’ll be working with multi-discipline function test members onsite and/or offsite proactively and positively to achieve smooth development progression and effectively issue resolutions.

- Document firmware design and qualification reports as per compliance requirements and fulfilling project life cycle gate reviews.

- Support manufacturing production in firmware related activities.

Job Requirements

- Electrical/electronic degree or equivalent.

- Minimum 2 firmware hands on experience with C/C++/Assembly programming.

- Familiar with DSP/MCU microprocessor architectures. Experience on peripheral driver development like SPI, I2C, UART, etc.

- Hands-on experienced at least one product cycle of implementing PMSM/BLDC control.

- Knowledgeable in using laboratory equipment that is used for control system debugging and verification.

- Experience on data acquisition with on-board ADC/DACs.

- Communication protocol development experience with bus like CAN, 1553 and Ethernet is added advantages.

- RTOS experience will be a good plus.

- Experience on digital signal processing for application like digital communication is an added plus.

- Matlab/Simulink – Embedded Coder for automatic code generation is an added plus.

Self-initiative, independent and a good team player

Role:

A Quality Assurance Manager at HOPE Technik will play a crucial role in ensuring the highest standards of quality for robotics, automation, and special vehicle projects. This individual will be responsible for leading and developing the Quality team, implementing quality assurance policies, and continuously improving processes to meet and exceed industry standards.

Key Responsibilities:

1. Team Leadership and Development: Build, train, and lead a team of quality assurance specialists.
   Foster a culture of continuous improvement and learning within the team.
   Conduct performance reviews and facilitate professional development opportunities.
   
2. Quality Assurance Strategy and Implementation: Develop and implement quality assurance policies and procedures.
   Collaborate with engineering and project management teams to integrate quality assurance into all phases of the development lifecycle.
   Ensure quality objectives are met by setting, monitoring, and enforcing standards and protocols.
   
3. Project Support and Quality Control: Provide expert guidance and support in quality planning for new projects, particularly in robotics, automation, and special vehicles.
   Oversee the inspection and testing of products to ensure adherence to established quality standards.
   Directly manage critical issues with product quality, providing immediate corrective actions and long-term solutions.
   
4. Continuous Improvement: Regularly review and analyze quality data and feedback to identify trends and areas for improvement.
   Implement innovative solutions and quality improvement practices.
   Stay informed of the latest industry trends, technologies, and quality assurance methodologies.
   
5. Compliance and Documentation: Ensure all quality assurance activities comply with industry regulations and standards.
   Maintain comprehensive documentation of quality assurance activities, tests, and outcomes for accountability and continuous learning.
   
6. Stakeholder Engagement: Communicate effectively with all levels of the organization, including senior management, engineering teams, and project managers.
   Build relationships with suppliers and external partners to ensure quality standards are understood and met.
   

Qualifications:

• Bachelor's or master's degree in Engineering, Quality Management, or a related field.
• Proven experience in quality assurance, preferably in the fields of robotics, automation, or vehicle engineering.
• Strong leadership skills with experience building and managing teams.
• Excellent problem-solving, organizational, and communication skills.
• Knowledge of quality assurance methodologies, tools, and regulations.
• Certification in Quality Management (e.g., CQM, CQE) is a plus.

Tuas and Biopolis, Singapore

ScaleUp Bio is seeking a highly skilled and experienced Quality System Specialist/ Assistant Manager to join our team. The Quality System Specialist/ Assistant Manager will be responsible for establishing and maintaining quality / food safety related systems. These can include document control, change control management , customer complaint, and various audits. The successful candidate will cover both of our facilities at Biopolis (Singapore) and Tuas (Singapore), and will be reporting to the QA/QC Manager.

Your Responsibilities:

• Assist QA Manager in the implementation of food safety and quality systems, actively participate in food safety efforts and ensure all activities conform to good manufacturing practices.
• Manage, plan, implement, and continuously improve the Food Safety/Quality programs in the Scaleup Bio facilities.
• Serve as the Food Safety Team member and is actively involved in all HACCP Plans.
• Responsible for management of the Supplier Programs including complaints management and feedback.
• Manage the conduct of local supplier audits to ensure that suppliers are qualified.
• Lead Change Control Management.
• Manage Document Control Program
• Manage the local Mock Recall exercise
• Assist QA Manager in crisis situations, such as a potential product recall, high profile customer complaint.
• Set up, implement, and maintain HALAL Assurance System. Main liaison with MUIS (Majlis Ugama Islam Singapura).
• Manage the conduct of internal audit program and ensure compliance to requirements of GMP / HACCP pre-requisite programs, Quality systems, Halal assurance system.
• Assist QA Manager to prepare for external audits and ensure agreed audit findings are corrected and preventive measures are put in place.
• Manage the customer complaint handling system – evaluation, investigation and corrective/preventive action planning, implementation and monitoring.
• Work with multi-disciplinary teams to ensure the progress timeline.
• Ensure safe working practice in research labs, pilot plants, and manufacturing facilities to meet or exceed safety goals.
• Any other tasks related to quality system, as assigned by QA Manager.

Your Profile:

• Bachelor degree with 5+ years’ experience or equivalent in Food Science / Food Technology or related field.
• Industrial experience is desired
• Experience in setting up quality system and food safety system in food industry.
• Trained in HACCP/ FSSC 22000 internal audit.
• Lead auditor certification would be a plus.
• Familiarity with microbial communities and fermentation process would be a plus.
• Strong communication and organization skills, be able to multi-task and exhibit a strong sense of urgency in order to accomplish daily tasks.
• Be self-motivated with the ability to manage time and priorities; must be able to work independently in a team environment, maintain a positive attitude
• Strong writing skills and be fluent in English.

1. Perform inspection, testing and sampling of material or assembled parts or products for defects and deviations from specifications.
2. Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
3. Report and Discuss inspection results with those responsible for products and recommend necessary corrective actions.
4. Issue NCR to materials and equipments that fail to meet material specifications.
5. Maintain records from testing, information and various metrics for tabulation of results
6. Inspect production cycle to ensure production is efficient and comply with safety standards
7. Prepare reports and logs, summarizing re-work and waste and input information to quality database
8. NCR data collections and photo taking.
9. Ensure calibrated equipments and logs are maintained and bring calibrated.

Requirements

• Preferably with related working experience.
• Minimum O’level or equivalent qualifications
• Proficiency in English and adequate computer skills.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

- Plan, manage and execute Production planning focusing on customer order fulfilment
- Ensure Production delivery plans are met
- Liaise with Production Manager and workers to create Production schedule and job-orders
- Handle with internal to determine sales orders and delivery schedule
- Co-ordinate the purchasing and requisition of raw materials
- Continue improvement of Production Planning System
- Monitoring operations to ensure that they meet production standards.

- Recommending adjustments to the assembly or production process.Inspecting, testing, or measuring materials or products being produced.Measuring products with rulers, calipers, gauges, or micrometers.
-Conduct Product Tests and Assessment.
- Identify Product Defects.
- Record and Report Issues.
- Support Process Improvements.
- Make Necessary Repairs.
- Relevant working experience in Manufacturing company
- Familiar with ISO 9001:4500
- must able to work OT as and when required.
- able to work under pressure and work independently as well as in a team
- Good interpersonal and communicate skillsOther ad-hoc duties assigned
- Possess at least a NITEC in Mechanical Engineering.

- Working Hour: 5 days week (Monday to Friday 8am to 6pm)
*Position open for Singaporean or Singapore PR ONLY*

Qualified or Interested candidates, please send us your updated resume to [email protected] regret to inform that only shortlisted candidates would be notified.

* NO AGENT *

Job Description

The Continental-NTU Corporate Lab invites applications for the position of Research Fellow.

Continental-NTU Corporate Lab is a S$50 million joint corporate laboratory between NTU and Continental that focuses on developing technologically advanced solutions in the areas such as autonomous robotics, navigation, artificial intelligence (AI), cybersecurity, smart materials, sensing, communication, and cloud technologies for future urban mobility applications. We aim to accelerate innovation in Singapore’s automotive industry and translate research outcomes into practical and viable urban mobility solutions for the future.

Key Responsibilities:

• Develop multi-agent control optimization or learning methods for multi-robot coordination and fleet management.
• Conduct simulation assessment and demo of the developed methods.
• Write the research results into publication manuscripts, patents, and/or project reports.

Job Requirements:

• PhD in Optimization and game theory, or Control, or AI, or Robotics.
• Have at least 1 first-author publication in top-tier journals in related areas.
• Good interpersonal skills.
• Good communication and writing in English.
• Good teamwork awareness.

We regret that only shortlisted candidates will be notified.

SR Quality / Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Salary: Basic $3,000 - $5,400 + AWS + VB

Time: Monday - Thursday (8.30am to 5.30pm) & Friday (8.30am to 5pm)

Location: Yishun Industrial Park

Responsibilities:

• Oversee effective implementation of ISO9001, ISO14001, ISO45001, ISO27001, ISO17025, MID-D, LNE, QC80000, IECEx80079 Management Systems throughout the company, including any business accreditations.
• Maintain the Quality Manuals and Quality Procedures and ensure contents are appropriate for business.
• Analyse current and future procedural needs of the business.
• Organise and manage the plant internal audit system and the corrective action reporting system.
• Conduct Quality Systems audits and assist in training/guidance to other auditors.
• Host external Quality System audits.
• Coordinate the review of Quality procedures associated with plant continuous improvement initiatives & company processes according to management systems.
• Maintain the Standard Operating Procedure content and coordinate the issuing of these documents.
• Collate quality data for monitoring targets.
• Assist with training of quality awareness.
• Undertake special projects as required.
• Quality control of work by appropriate reviews.
• Support/lead process/continuous improvement activities.
• Manage & monitoring of equipment calibration.
• Coordinate with Outsource Management during selection, assessment and approval of subcons for PCBA, Meter & Full turnkey.
• Responsible for establishing, controlling/maintaining and improving the subcon quality assurance and development system.
• Perform audits on new and existing subcons with the purpose of evaluating the expected quality performance of the subcon.
• Involve in New production introduction & Product transfer to Subcon.
• Initiate Corrective Action Report management and resolution.
• Working with subcon on customer complaint 8D.
• Develop and maintain comprehensive procedures and policies to measure and ensure subcon performance.
• Monitor key quality metrics (Subcon OTD, and Quality – system, process audit & yield).
• Establish sampling plan & testing criteria during incoming, site inspection or at subcon production.

Requirements:

• Bachelor degree in engineering, or related field.
• Minimum of 3 years related experience.
• Must be able to analyze data for accuracy and correctly interpret results.
• Experience in ISO9001, ISO14001, ISO45001, ISO27001, ISO17025, MID-D, LNE, QC80000, IECEx80079.
• Working in multi-national company, having experience working with different sites in aligning the procedures & processes.
• Good English communication skills, both verbal and written.
• Strong analytical, organizational and troubleshooting skills.
• Must be proficient in MS Word, Excel, PowerPoint, Access, Relational Databases, MS Outlook.
• Must be able to communicate with all levels of the organization.
• Soft Skills Competencies.
• Action Oriented Organizing.
• Command Skills Peer Relationships.

Please submit your updated resume by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform you that only shortlisted candidates would be notified.

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Lon Kei Hin | EA Personnel No.: R23116368

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

The School of Electrical and Electronic Engineering (NTU EEE) invites applications for the position of Research Engineer I.

The Research Engineer will be responsible to lead the effort to translate high-level audio algorithms implemented in other audio prototyping software into a high-performance, architecture-specific code. Work closely with other researchers to design and implement DSP algorithms that meet system-level constraints. The Research Engineer will also be defining and implementing software architecture for real-time audio systems on prototype hardware containing a multitude of co-processors and carrying out the experiments.

Key Responsibilities:

• Perform independent research and development of emerging and future audio technologies

Job Requirements:

• Bachelor in Electrical/Computer Engineering with emphasis in audio and acoustics signal processing
• Have performed final year project related to active noise control
• Have written a report or paper on active noise control
• Good audio signal processing fundamentals (for example, Fourier analysis, transfer functions, filtering, linear algebra, matrix algebra etc)
• Experience conducting acoustic measurements using standard acoustic equipment (speakers, microphones, anechoic chambers, acoustic mannequins)
• Ability to communicate findings and ideas to other teams and to management using both written documents
• Experience with speaker or microphone arrays, or machine learning is a huge plus

We regret that only shortlisted candidates will be notified.

Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality QAQC Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Job Responsibilities:

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards

Requirements:

• Diploma in Mechatronic, Electronic Engineering or equivalent or
• 3 years Quality experience in Service/Maintenance/Repair industry
• Possess good knowledge of ISO 9001, QA methodologies & tools
• Good communication & interpersonal skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Basic Functions:

• Assist in maintaining company’s compliance to quality management system established.
• Responsible in monitoring the calibration and maintenance program.
• Ensure that ISO 13485, In-vitro Diagnostics Directive 98/79/EC, IVDR 2017/746 and 21 CFR Part 820 Quality System Requirement, MDSAP (Medical device Single Audit Program) are properly implemented and maintained at all levels.
• Establish and maintain proper document archiving and control system.

Duties:

• Assist in maintaining company’s compliance to quality management system established.
• Assists in internal and external audits.
• Responsible in handling the corrective and preventive action system and its sub-system (i.e. Nonconforming product and internal audit).
• Ensure that proper document control procedure and system is implemented for Product Specifications, Operation Manuals, Standards, Drawings and all quality related documents.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Together with the Documentation Center, ensure that all documents submitted and/or generated are archived.
• Co-ordinate, review, collate, update and issue all quality-related documents to relevant personnel.
• Prepare necessary documentation (e.g. Certificate of Analysis and Certificates of Origin) to support shipment of products overseas.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Ensure that all documents submitted and/or generated are archived.
• Receive Production / QC Records and all quality related documents and ensure that proper document archiving and control system is implemented.
• Ensure that all documents submitted and/or generated are archived.
• Compile and ensure that the Quality Records Master List is updated.
• Perform other duties as assigned.
• Support the projects of material qualification
• Any other duties as and when assigned.

Minimum qualification Requirements

Ability to:

• Demonstrate the use of all equipment, materials, and techniques relevant to job performance, execute and maintain pertinent validation protocols as required and maintain quality standards.
• Establish quality assurance system and undertake systems / product / process validation

Knowledge of: Various quality control/process control requirements, quality management system and documentation relating to biomedical and /or IVD products. Technical terminology used in the laboratory, assigned scientific techniques and knowledge of QC procedures governing a number or basic laboratory operations.

Education: Basic Science Degree

Experience: No prior working experience is required for Executive position. At least 3 years of relevant working experience for Senior Executive position.

Job Responsibilities

• Assist with the implementation and maintenance of the Quality Management System in accordance with ISO 9001 and 13485 standards, and in compliance with the H.S.A GDP Guidelines.
• Provide support for investigation into non-conformances and customer complaints.
• Maintenance and Follow-up on Corrective Actions and Preventive Actions (CAPAs).
• Provide the trainings and coordinate the trainings for the staff.
• Registration of the trainings into the electronic Quality Management System (eQMS) and running of reports.
• Assist with the documentation review after an operational activity.
• Collection of Temperature Data and Monitoring of the temperature environmental conditions.
• Reporting of day-to-day activities.
• Take care of and communicate with internal and external contacts.
• Control administrational aspects of the facility (e.g. archiving).
• Promote a “quality” culture within the company.
• Performing physical checks for GMP and GDP related processes

Job Requirements

• Possess at least a Diploma in Pharmacy, Life Sciences or relevant fields.
• Possess at least 2 years of pharmaceutical science work experience (or prior Life Science internship experience) is preferable .
• Experience with ISO 13485 standards is an advantage.
• Knowledge of GMP and/ or GDP guidelines is an advantage.
• Able to work in a fast-paced environment
• Work well independently/with minimal supervision and with others in a team
• Proficient in Microsoft Office especially Excel
• Candidate needs to be based in Singapore.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities

• Responsible for the organization, administration, training, development, and supervision of personnel under QA Documentation and Training Area. The incumbent hires, trains, develops, evaluates performance, and administers following established personnel policies and procedures.
• Maintains an organizational structure capable of meeting both the immediate and long term objectives of the Quality areas under his/her responsibility. 
• Prepares annual/update budgets for the sub department.  Responsible for developing, implementing and maintaining the effectiveness of the quality system (Quality Documentation, Training and Supplier Quality departments).
• Owner of the Management Review process and related metrics tracking and trending. (Quality Documentation, Training and Supplier Quality departments)
• Ensure compliance with applicable AbbVie policies, processes and procedures, contributing to the development of strategies and oversight of complex programs.
• Drive implementation of policies and procedures to maintain compliance to global regulatory requirements for policies, processes, and procedures.
• Manage broad and cross-functional quality programs, initiatives and organizational change related to the AbbVie quality system.
• Lead goals with cross-functional/cross-divisional/global scope.
• Ability to expedite and resolve issues. Elevate issues as appropriate.
• Responsible for Training Section and for the establishment, administration, and maintenance of a CGMP training program.
• Responsible for Documentation Section and for administration and maintenance of documentation control quality programs such as: Document Change Control, Document Retention, and Batch Record Archive, among others. 
• Responsible for Supplier Quality Section and for the establishment, administration, and maintenance of a supplier quality programs such as CAPA system oversight, Supplier Quality Management and Supplier Qualification. 
• Operates within the constraints of limited human and financial resources and changing priorities.  Liaison with other AbbVie Sites and 3rd Parties. 
• Participate fully and/or chair relevant Project team meetings. 
• Actively supports functional work centers within Quality and Site to achieve goals. – QC, Engineering, Quality Systems and Operations.
• Assists Quality Director with assigned tasks including budgetary control and key meeting preparations.

Requirements

• Degree or Higher in Science or Engineering discipline. 
• Quality or Regulatory Qualification an advantage but not essential. 
• A minimum of 5 years’ experience in a Quality or Project/ Program Leadership role in pharmaceutical, biopharmaceutical experience in Quality and/or Compliance (GxP) environment 
• Strong communication skills, written and oral.
• Excellent knowledge of pharmaceutical regulatory requirements (GMP) is essential. 
• Previous Leadership experience essential, 2 years min in either Project leadership or people leadership roles.
• Demonstrated change agent and innovative person. 
• PMP software skills an advantage. – MS Project, Mind Manager etc.
• Requires knowledge of quality/compliance management as well as regulations and standards affecting APIs and Biologics
• Experience in managing diverse teams is preferred.
• Expected to demonstrate high levels of integrity and a strong work ethic at all times and ability to supervise a team including supervisors, contractors and trainees
• Strong problem solving skills and highly independent
• Self driven and meticulous individual

Sunningdale Tech Ltd is a leading manufacturer of precision plastic components. The Group provides one-stop, turnkey plastic solutions, with capabilities ranging from product & mould designs, mould fabrication, injection moulding, complementary finishings, through to the precision assembly of complete products.

Boasting a total factory space of more than 4 million sq feet, with more than 1,000 injection moulding machines and a tooling capacity of 2,000 moulds per year, Sunningdale Tech is focusing on serving four key business segments – Automotive/Aerospace, Consumer/IT, Healthcare and Tooling.

With manufacturing facilities across Singapore, Malaysia (Johor, Penang), China (Tianjin, Shanghai, Suzhou, Zhongshan, Guangzhou, and Chuzhou), Latvia (Riga), Mexico (Guadalajara), North America (Phoenix), India (Chennai), Thailand (Rayong), and Indonesia (Batam), Sunningdale Tech is strategically positioned to target and capture opportunities in diverse business sectors globally.

As an industry leader with deep engineering expertise and experience, Sunningdale Tech is driven to solve your challenges by applying our advanced capabilities & leading technology in ways that benefit you. We’re ready to provide solutions at every step of the process to reduce lead time and add value for customers, while maintaining our excellent quality. Beyond that, we build on our strong foundations to think out of the box and apply relevant new possibilities for your complex engineering problems. Customers can trust us to constantly solve challenges to meet their needs, and apply new ideas for better outcomes.

Responsibilities:

• Resolves customer inquiries, quality, and operational issues in a timely manner by consulting with the Business Development HOD, Operation Manager, QA Manager, other supporting managers, Superior
• Manage, lead, and motivate a team of quality inspectors and technicians to meet departmental objectives and goals, create and promote food safety, GDP, GMP & lead by example
• Early involvement in new product and project development to establish internal specification and keep abreast of customer requirements
• Document in STL’s quality system and implement programs to ensure compliance with applicable regulatory requirements and corporate’s quality system requirements
• Develop and continually improve production, inspection and process control activities, corrective & preventive action, hazard analysis and risk management
• Responsible for timely closure of CAPA, non-conformance investigation report, customer complaints and deviations. Escalate to superior if required
• Analyse and trend various Key Performance Indicators per management’s vision and direction, including indicator of interest
• Develop, reviews, and approves qualifications and validation protocols, involvement in food Hazard/Medical device Risk management activities and departmental level risk and opportunity assessment, including JSA
• Ensures effective communication internally & externally
• Ensure department’s personnel competency, develop, and retain skill base knowledge within the organisation, through training needs identification
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma and / or Bachelor Degree in Biomedical Engineering
• Minimum 2 year's experience in QA function, preferably in plastic injection molding company
• Strong knowledge of Quality tools and Quality concept fundamentals
• Ability to perform root cause analysis, process optimization, data analysis and validation effectively manage a high-volume manufacturing setting/environment
• Ability to apply problem solving technique and provide solutions under minimal supervision.
• Good written and oral communication skills
• Training and developing both technical and non-technical employees
• Prior supervisor experience managing several direct reports

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Only shortlisted candidates will be notified

Sunningdale Tech is an equal opportunity employer – we believe that a diverse and inclusive workforce will cultivate a vibrant, productive and innovative workplace where all employees are truly respected and valued.

All qualified applicants shall be considered for employment regardless of age, race, gender, gender identity, religion, marital status, medical condition, mental or physical disability, national origin, political and/or third party affiliation or veteran status. All offers of employment shall be conditioned upon successful completion of background checks, valid work passes and medical screenings, as applicable and/or mandated by law, and subject to the applicable local laws and regulations.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The School of Electrical and Electronic Engineering (EEE) invites applications for the position of Research Associate. The RA will work on a research project on the development of vision based robotic manipulation techniques for soft objects based on CNNs.

Key Responsibilities:

• Modelling of soft objects
• Development of robot vision system for detection and localization of soft objects using machine learning
• Development of control methods for manipulation of soft objects

Job Requirements:

• Master Degree in Electrical and Electronic Engineering
• Expertise in machine learning, robotics and control
• Experiences in robotics and machine learning related projects
• Good Publication track record
• Proficiency in basics of programming languages such as C, C++ and Python
• Proficiency in English

We regret that only shortlisted candidates will be notified.