Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

• Respond promptly and professionally to high-priority complaints or concerns escalated by internal departments or external stakeholders, ensuring a service-oriented approach.
• Act as a key point of contact between internal departments and external entities (e.g., citizens, businesses, and other government agencies) to resolve issues efficiently and effectively, with a commitment to delivering high-quality service.
• Ensure that all written communications adhere to relevant laws, regulations, and agency policies, while reflecting the agency’s commitment to quality service.
• Maintain detailed and organized records of escalations, including actions taken, outcomes, and follow-up requirements, to ensure accountability and continuous improvement in service delivery.
• Identify trends and recurring issues in escalated cases, and provide feedback to improve processes, policies, and communication strategies that enhance the quality of service. Prepare concise and insightful written briefs on complex escalated issues, offering recommendations that prioritize both resolution and service quality.

Requirement:

• Bachelor’s degree in Communications or similar related field.
• At least 2-3-years of experience in a writing or communications role
• Demonstrated ability to manage escalations and sensitive situations with tact and professionalism.
• Exceptional written and verbal communication skills.
• Ability to manage multiple tasks and work under pressure to meet deadlines.
• Experience in dispute resolution or customer service
• Analytical skills to assess complex issues and recommend solutions.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/9402

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

Territory: To do technical service for Infineon's clients.

Job Description:

1. Equipment Maintenance:

• Perform regular maintenance and calibration of equipment to ensure optimal functionality, particularly for Infineon project requirements.
• Develop and implement preventive maintenance schedules to minimize downtime.

2. Mechanical Troubleshooting:

• Diagnose and resolve mechanical issues promptly to prevent production delays in the Infineon project.
• Use technical manuals, schematics, and diagnostic tools to identify problems.

3. On-Duty Business:

• Serve as the primary point of contact for Infineon customers regarding quality issues.
• Ensure timely and effective communication with Infineon customers to address their concerns.
• Document and report on quality incidents, providing detailed analysis and solutions.
• Willing work in night shift

4. PLC Skills:

• Utilize PLC (Programmable Logic Controller) skills to program, troubleshoot, and maintain automated systems specific to Infineon project requirements.
• Ensure that PLC systems are functioning correctly and efficiently.
• Provide training and support to team members on PLC operations and best practices.

Qualifications:

• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience in equipment maintenance and mechanical troubleshooting.
• Strong knowledge of PLC programming and troubleshooting.
• Excellent problem-solving and analytical skills.
• Effective communication and customer service skills.
• Ability to work independently and as part of a team.
• Willingness to travel to Infineon customer sites as needed.

We are looking for a QA Engineer proficient in Automation Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration.
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes.
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement.
• Integrate automated tests with CI/CD pipelines.
• Identify areas where automation can improve operational efficiency and reduce manual intervention.
• Document automation processes, test cases, and results for reference and auditing purposes

Requirements

• Tertiary education in Computer Science or related field.
• Min 3 years’ experience in automation development using Python / Selenium / Appium.
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50775 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Master's Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• Experience in Optomechanical design including knowledge of optical principles, components and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc.
• Strong and thorough knowledge of quality engineering discipline, including:
• Quality data collection and data analysis
• Understanding of statistical methods, including population sampling, hypothesis testing
• Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

Responsibilities

• Establish, maintain, and continuously improve the Quality Management System (QMS), approvals, and regulatory compliance requirements.
• Plan, organize, and lead quality initiatives to promote a culture of quality within the organization.
• Maintain and enhance quality performance across all divisions.
• Conduct essential audits and inspections internally or via third parties or clients as required.
• Establish, implement, and coordinate the audit and approval program, report audit outcomes, and ensure corrective actions are followed up.
• Support teams in root cause analysis, develop action plans to prevent issue recurrence, and provide training and guidance as needed.
• Investigate incidents and prepare detailed reports in line with regulatory requirements.
• Train and develop employees on QMS processes, quality principles, tools, and techniques.
• Manage licensing applications and renewals for sites, products, and services.
• Allocate budgets and control costs for QMS projects, resource management, training, audits, certifications, and professional subscriptions.
• Implement quality procedures aligned with regulations and maintain documentation of approvals, procedures, and accreditations for assigned locations.
• Communicate quality procedures to ensure all regional team members understand their responsibilities in supporting quality assurance.
• Manage operational, technical, health, safety, and environmental audits per the audit schedule.
• Participate in investigations of quality issues, non-conformances, and complaints, ensuring documentation, reporting, and appropriate escalation.
• Monitor and follow up on supplier corrective and preventive actions (CAPA) and improvement initiatives.
• Contribute to statistical analyses to recommend improvements.
• Advise leaders and senior managers on compliance issues or supplier quality improvement needs.
• Perform any additional duties or projects as assigned.

Requirements

• Candidate must have minimum of 5 years working in aerospace MRO or aviation workshop
• Minimum Diploma in Engineering or Quality Assurance or related field.
• Candidate must be certified ISO Lead and Internal Auditor
• Passed the CAAS L11/M10 / L12 exam
• Experience in Part 145 approvals and activities.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Job Summary

Plan, co-ordinate and oversee all QA support activities and initiatives in the work cell. To improve process capabilities and product quality to meet the desired targets.

Job Description

• Oversee the product quality from assembly to packaging process and ensure full compliance to the Quality System and regulation requirements.
• Champion data-driven decisions to resolve non-conformances, complaint investigation, CAPA, deviation and other quality matters in a timely manner.
• Interfaces with R&D, unit quality, customer quality engineer to formulate plans and actions to meet product specifications and quality requirements
• Drive quality improvement/automation projects through project planning, scheduling inspection/testing activities, performing analysis and publishing reports.
• Perform test method validation, installation qualification, correlation study for new quality equipment/test method.
• Act as a support role for regulatory, external, internal and/or supplier audits and lead the value stream members to execute the corrective actions for compliance with customer specifications.
• Perform data analysis and trending for product quality performance through monthly and quarterly management review meeting.
• Establish and maintain effective system and procedures to ensure that all manufacturing and engineering documentation are controlled and updated per established regulatory requirements.
• Supervise quality technical specialist and a group of technicians on quality tests and checks.
• Safety & ISO 14001 Environmental accountability: Ensure a safe, healthy and environmentally-friendly workplace by observing Company's rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
• Perform any other tasks as assigned.

Preferred Requirements

• Minimum 3 to 5 years relevant working experiences in a quality engineer role.
• Demonstrated good understanding of key elements of Quality Management system, CFR Part 820, ISO 13485.
• Have prior experience in managing quality improvement projects would be an added advantage
• Able to effectively multi-task and work independently with a high level of initiative

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

The Company

At IRVINS, you'll join Singapore's high growth homegrown consumer food brand expanding quickly on the global stage, with 5 offices and 19 markets worldwide, and a product lineup that redefines the food industry.

Founded in 2008, over the years we have pivoted and evolved from an F&B restaurant into a modern food CPG startup. With IRVINS’ global reach, category and market leadership, and startup mentality, we welcome people with a builder attitude keen on building things from scratch and help turn a homegrown brand into Singapore’s iconic global consumer brand.

The Operations Quality Specialist is responsible for ensuring the quality and safety of products in a food manufacturing environment. This role involves monitoring production processes, conducting quality checks, enforcing compliance with regulatory and internal standards, and driving continuous improvement initiatives to enhance product quality and operational efficiency.

Responsibilities:

Quality Assurance & Control:

• Perform routine quality inspections and audits across all stages of the production process, including raw materials, in-process, and finished products.
• Monitor adherence to Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), and food safety protocols.
• Review the tests method and analysis using established quality control methods, ensuring products meet defined specifications and standards.
• Responsible for the Batch record review and perform the release of the product. Work closely with production and supply chain team to ensure the market demand is fulfilled.
• Document and report non-conformities and collaborate with relevant teams to implement corrective and preventive actions.
• Support the new product initiative with different stakeholders, ensure the quality of the product is compliance to the product specification
• Managing the equipment calibration used in QC & Production, to ensure the calibration is up to date and maintained.
• Review and manage the GMP audit, to ensure the GMP requirement is maintained and at audit ready status.

Regulatory Compliance:

• Ensure compliance with GFSI standard and regulations (e.g. BRCGS, FDA, HACCP) and company policies.
• Assist in preparing for and participating in regulatory and third-party audits.
• Maintain accurate and up-to-date records for traceability and regulatory purposes.

Process Improvement:

• Identify areas for quality improvement and work closely with production teams to enhance processes.
• Participate in root cause analyses and contribute to continuous improvement initiatives.
• Develop and deliver training sessions for staff on quality standards and food safety practices.

Collaboration & Communication:

• Serve as a liaison between the Quality Assurance and Operations teams to ensure seamless communication and alignment on quality objectives.
• Provide feedback and recommendations to production staff and management on quality-related issues.
• Support new product development and changes in production by evaluating potential quality impacts.

Job Summary:

The Compliance and Quality Assurance Specialist will play a critical role in preparing, organizing, and managing documentation and evidence for SSG audits. This position will also be responsible for planning and coordinating new training programs, ensuring that our processes and materials meet regulatory standards to maintain our status as an SSG-approved training provider.

Key Responsibilities:

Audit Preparation: Organize and prepare necessary documents and evidence for upcoming SSG audits, ensuring readiness and compliance.

Documentation Management: Maintain accurate, up-to-date records of all training programs, student outcomes, and relevant compliance documents.

Policy Compliance: Monitor and ensure adherence to SSG guidelines, including regularly reviewing and updating internal policies.

Process Improvement: Identify and implement improvements to compliance and quality assurance processes for smoother audit preparation and internal controls.

Stakeholder Coordination: Collaborate with internal teams and stakeholders to ensure all aspects of our training programs meet regulatory standards.

Requirements:

Experience: Minimum of 1 years in compliance, quality assurance, or related roles; experience in the training or education industry is a plus.

Knowledge of SSG Compliance: Familiarity with SSG guidelines and audit requirements is preferred.

Education: Diploma or degree in Business Administration, Compliance, Quality Management, or a related field.

Skills: Strong organizational and documentation skills, excellent attention to detail, and proficiency in managing records and evidence for audits.

Communication: Ability to work with cross-functional teams and communicate compliance requirements effectively.

Roles & Responsibilities:

• To look after worksite environmental, health & safety, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards.
• Advise & train workers, staff and site personnel on EHS.
• Responsible for monitoring all activities on site and ensure that all contractors comply with the requirements of environmental compliance.
• Record, compile and prepare HSE reports and submit site environmental control report periodically.

Requirements:

• Registered ECO with NEA.
• WSQ Certificate in Workplace Safety and Health.
• At least 5 years of experience in the building & construction industry as a Registered ECO.

-Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality

-In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations

n Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

Responsibilities:

• Inspect incoming raw/packaging materials and product labels to ensure they meet standard specifications.
• Conduct checks on the production line for compliance with Good Manufacturing Practices (GMP), including in-process items and finished products, ensuring adherence to Standard Operating Procedures (SOP) and product specifications.
• Generate weekly QC reports.
• Work closely with the production team to ensure quality products are produced.
• Ensure products adhere to and comply with food regulations.
• Report non-conformances to superiors or the person-in-charge for investigation and corrective action.
• Verify product labels before printing.
• Support in managing retention samples.
• Assist in pest control management.
• Maintain documentation and records.
• Identify opportunities for process improvement and quality enhancement.
• Perform any other related duties as assigned by superiors.

Requirements:

• Minimum 1 year of relevant working experience preferred.
• Capable of working as part of a team as well as independently with minimal supervision.
• Possesses good interpersonal skills, analytical skills, self-motivation, and meticulous attention to detail.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

Degree / Diplom in Science, Electrical / Instrumentation / Process Control System

Prepare the ITP, QA / QC Check List, Quality plan and submit the documents to Client as per Pharma / Wafer Plant requirement

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

Project Management and Quality Inspection with Client, Main contractor and Sub Contractor

Quality trainning including practical to the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for update the site installation, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to submit the drawing to clients

Prepare the materials BOQ to procurement team

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS as per client required

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694