. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Quality Technician, Product Quality is responsible for product release of complete instrument and play key role in ensuring the released instrument is meeting quality and regulatory requirements.

This position reports to the Senior Manager, PQE and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Perform outgoing product release (Device History Records buy-off) and inspection on instruments according to documented procedures.
• Perform part tracking for install and complaint issues. Ensure part is being received so failure analysis can be initiated.
• Support in complaint investigation activities. The job also require work with cross functional team and ensure proper investigation records is generated.

The essential requirements of the job include

• Diploma/ ITE in Engineering or equivalent.
• 2-3 years of relevant working experience in QA is required.
• Knowledge of the following QMS standards - ISO9001 QMS, ISO13485 QMS and FDA 21 CFR Part 820 is strongly

It would be a plus if you also possess previous experience in:

• Experience with working in a manufacturing environment is preferred.
• Experience in performing product release activity for medical equipment’s.

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Descriptions:

To support in setting up robust systems and processes at branch office(s) and ensure compliance by Branch Finance team(s) for all Finance & Accounting relating matters.

Overview of responsibilities:

Collaborate with branch office(s) to ensure compliance both with reporting requirements, tax laws and statutory requirements.

• Act as branch reviewer with continuous engagement with respective Branch Finance Controllers.

• Review the branch activities including finance, audit, tax and other compliance, periodical financials, position papers etc.

• Provide necessary support and handholding from HO perspective.

• Implement the financial control systems, policies, and procedures.

• Collaborate with head office to ensure the accuracy of cash flow projections.

• Develop budget and revisions and monitor monthly deviations.

• Work closely with vertical(s) to set up processes that enhance the internal controls.

• Ensuring prompt and accurate month-end and year-end close processes.

• Review financial statements and assure their timely submission.

• Provide support to internal and external auditors in completing audits across all branch office(s).

• Work closely with branch finance controller to understand changes in local compliances, regulations etc.

• Provide support in setting up Finance &Accounts operations in new branch office(s).

• Ensure implementation and compliance to SAP in new branch office(s).

• Assist in preparation of Corporate MIS(Consolidated).

• Assist in analysis of MIS from branches and provide inputs.

• Prepare compliance report on quarterly basis, review of Branch Compliance reports and exceptions, if any.

• Prepare consolidated compliance report to present to management.

• Assist in reviewing SOP compliance by all locations and co-ordinate with the branch accountants to ensure SOPs are followed.

Key Challenges:

• Engagement with multiple parties operating in different time zones.

• Ability to manage the work in stringent timelines.

• Travel to respective branch for inspection/audit/review

Knowledge, Skills & Abilities

• Certified Accountant/ CPA/ MBA in Finance

• 5-7 years of relevant experience including management of multiple geographies

• Proficient with SAP, Microsoft Office tools

• Excellent verbal and written communication skills.

• Ability to coordinate with team members in multiple geographies.

• Knowledge of IFRS, Consolidation, Tax, Accounting, Compliance, Financial Statements, Financial Reporting, MIS

• Good understanding of accounting concepts.

• Strong commercial acumen.

• Strong analytical skills.

• Ability to partner effectively

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

REQUIREMENTS

• Master's Degree in Accounting or equivalent.
• Minimum 10 years experience in finance management in construction industry
• Good communication skills.
• Strong leadership qualities.
• Excellent interpersonal skills.
• Sound knowledge of accounting fundamentals.
• Auditing experience.

JOB DESCRIPTION:

• Manage all accounting operations including Billing, A/R, A/P, GL and Counsel, Cost Accounting, Inventory Accounting and Revenue Recognition.
• Coordinate and direct the preparation of the budget and financial forecasts and report variances.
• Prepare and publish timely monthly financial statements.
• Research technical accounting issues for compliance.
• Support month-end and year-end close process.
• Ensure quality control over financial transactions and financial reporting.
• Manage and comply with local government reporting requirements and tax filings.
• Develop and document business processes and accounting policies to maintain and strengthen internal controls.
• Should be able to handle companies cash flow management.
• Independent knowledge in companies cash flow.

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

REQUIREMENTS:

• Master's Degree in Accounting / Finance / ACCA or equivalent
• Minimum 10 years of relevant working experience in construction industry
• Prior audit experience will be an added advantage
• Experience with accounting software will be added advantage
• Understanding and knowledge of accounting principles, practices, standards, laws and regulations
• Sense of ownership and pride in your performance and its impact on company’s success
• Team player who is driven and able to work in a fast paced environment and under pressure
• Critical thinker and problem-solving skills
• Meticulous and able to multi-task
• Great interpersonal and communication skills

JOB DESCRIPTION:

• Responsible for the day to day account and finance operations
• Prepare and maintain full sets of accounts
• Ensure timely and accurate periodic financial closing and reporting
• Prepare, review and present financial reports and statements to stakeholders in a timely and accurate manner
• Monitor and ensure proper invoicing and monthly payment collections
• Preparation of group consolidation accounts
• Preparation of GST submission
• Handle yearly tax returns and other related claims
• Responsible for cashflow reporting and projections
• Assist in preparing budgets, forecasts and analysis
• Managing statutory audit and tax compliance process
• Liaise with Banks for related banking facilities
• Ensure compliance with internal controls and policies
• Drive continuous improvements in accounting processes, systems and workflows to enhance efficiency and accuracy
• Other ad-hoc duties assigned

Do you have a flair to MAINTAIN & IMPROVE Service Standards? You are the ONE!
We are seeking out for FRESH GRADUATES to apply! Contact us @ 9729 7893!!

Job description

As a Service Assurance Officer, you will be responsible for ensuring that services meet the established standards set by ISS and the client. Duties include maintaining strong overall quality control of our services adhering to reliability, performance and customer expectation. Inspection of the service quality is part of the job with the obligation to report and document findings.

Responsibilities:

• Perform routine quality inspections and audits daily on the service standards
• Monitor adherence to all the established SOPs on site to ensure service quality meet defined specifications and standards.
• Reporting to the Assistant Resident Managers (ARMs) to ensure all routine works are fulfilled.
• Document and report non-conformities and collaborate with relevant teams to implement corrective and preventive actions.
• Operate autonomous robotic and all cleaning machines efficiently and manage on-site systems while responding promptly to the system requirements or issues.

Qualifications and Skills:

• NITEC or Diploma holders (Fresh grads are welcome to apply)
• Able to work independently, as well as a team player.
• Able to do shift work
• Proficient in MS Office especially Microsoft Word, Excel and PowerPoint.
• Possess good communication skills - written and verbal
• Singaporeans only

Job Details:

• Duration Needed - 2 Month
• Mon to Saturday - 6 Days work per week
• Project at Jurong Pier Sub station
• Conduct regular inspections and risk assessments at the workplace to identify any foreseeable risk arising from the workplace.
• Recommend reasonable measures to eliminate any foreseeable risk at the workplace
• Ensure all statutory regulations are comply with NEA’s requirements
• Prepare and submit weekly environmental report
• Enforce & improve Workplace Safety and Health / Environmental Control standard at the workplace
• Any other duties as assigned by superior(s)

Job Responsibilities:

• Inspect and identify potential hazards in the workplace to ensure a safe environment.
• Conduct regular inspections of work areas to verify compliance with workplace safety and health regulations.
• Inspect and assess equipment to confirm it is in good working condition and does not pose environmental or health risks to users or the workplace.
• Recommend and implement solutions to address unsafe practices or conditions in the workplace.
• Perform risk assessments on work sites to identify and mitigate potential dangers.
• Prepare detailed reports on workplace safety assessments and findings.
• Manage all environmental health-related matters, including:
  1. Control and prevention of disease-bearing insects and rodents.
  2. Proper disposal and management of construction waste.
  3. Monitoring and mitigation of noise, air, and dust pollution.
  4. Prevention of earth littering and maintaining site cleanliness.
  5. Addressing siltation in drainage systems.
  6. Ensuring food hygiene standards are upheld in workers’ canteens, if applicable.
  7. Overseeing any other environmental health concerns.

Requirement:

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 3 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possesses high experience will be considered for senior role.

• Independently plan, conduct, and coordinate process assurance assignments, involving waterfall and agile projects.
• Review progress and evaluates results, which are communicated to the Project Manager and key stakeholders.
• Independently leads and plans interaction with project managers and delivery leads to establish/execute process assurance plans.
• Plans and implements recommendations for major improvements to existing processes and procedures.

Key Requirements

• Degree in computer science/engineering or related disciplines.
• 1-2 year of Audit / Technology Risk (IT Risk) Management experience.
• Ability to communicate plans and deliver timely effective information to leadership and key stakeholders.
• Strong written and verbal communication skills.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 1-3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:
[email protected]

Tricia Celestine Goh (R1981653)
Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description:

• Attends customer’s complaints, enquires on quality related matters
• Investigate and analysis of customer complaints and follow-up with the relevant departments to ensure that they are addressed and closed in a timely manner
• Co-ordinate customer’s requests for products in mass production
• Attend quality reviews and presentations as and when required to by the customers
• Monitor and manager product quality performance and submit review report to Management periodically
• Study and improve production quality yield for each status of sample

Job Requirements:

• Candidate must possess at least Bachelor’s Degree in Engineering or equivalent
• Minimum 2 years of relevant working experience in similar role
• Self-motivated, innovative, dynamic and team player
• Excellent written and verbal communication skills
• Able to meet deadlines and willing to perform overtime
• Candidate with no working experience is also welcome to apply

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Job Description & Requirements

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

Responsibilities

You will assist in the tasks of the Quality Service and Finance units for the client, with a focus on both quality service and finance support, including:

Quality Service tasks:

1. Addressing clients' queries over the phone and via emails.

2. Attending to walk-in clients.

3. Providing administrative support to the QS team as needed.

4. Any other duties assigned by the QS Manager.

Finance tasks:

1. Handling procurement tasks and managing stock of pantry/stationery items.

2. Scanning, filing, and organizing documents.

3. Checking details in SCMS for investigations, processing refunds, and resolving discrepancies in backlog or current cases.

4. Assisting with the implementation of NETS at kiosks.

5. Sending email reminders to Hakams to submit claims.

6. Any other duties assigned by the Finance Officer/Manager.

Working Arrangement:

Working Hours:

Mon to Thurs – 8am to 5.30pm

Fri – 8am to 5pm

Sat-Sun and PHs - Not working

Duration: 6 Months

Location: Lengkok Bahru

Requirements:

1. Diploma in any discipline. Candidates without a diploma but with relevant work experience will also be considered. Fresh graduates are welcome to apply.

2. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and the ability to work with multiple IT systems.

3. Good communication and writing skills

4. Organized with excellent time management skills and the ability to prioritize tasks effectively.

5. Ability to handle sensitive information with confidentiality.

6. Meticulous attention to detail, ensuring accuracy in document handling, procurement, and financial tasks.

7. Strong problem-solving skills and the ability to identify and resolve discrepancies in a timely manner.

8. A proactive, self-motivated individual who can work independently and collaboratively within a team.

9. Able to handle multiple tasks and work under pressure, while maintaining a high level of professionalism.

10. Passionate about serving the community and demonstrating empathy and respect when dealing with clients and colleagues.

EA License No.: 96C4864

Reg. No.: R22110485 SHANICE LIM XIN NI

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

General description:

Bank of Singapore opens doors to new opportunities.

Start your career with bank of Singapore as Quality and Automation lead

At bank of Singapore, we are constantly on the lookout for exceptional individuals to join our team. We promote a culture of openness, teamwork, and fairness. Most importantly, we invest in our people through our programs that develop them on both professional and personal levels. Besides attractive remuneration packages, we offer non-financial benefits and opportunities to develop your potential within OCBC group’s global network of subsidiaries and offices. If you have passion, drive, and the will to succeed, rise to the challenge today!

Platform and transformation (“P&T”) is the team responsible under BOS global coo (“GCOO”) to build the WM platform of the future across all offerings, all teams, and all locations. The team is responsible for strategic initiatives including building channels, wealth & execution platforms as well as regulatory and risk transformation. The team is also in charge of financial markets and client data as well as the agile practice at BOS.

We are seeking a highly motivated and experienced quality & automation lead to join our dynamic team. This role is pivotal in ensuring the highest standards of quality in our platform through effective testing and automation strategies. The successful candidate will lead a team of quality assurance (QA) testers and robotic process automation (RPA) developers, driving improvements in test quality, enhancing the efficiency of testing processes, and leveraging technology to optimise our workflows.

This position requires someone with a strong background in quality assurance, automation, and team management, who is passionate about delivering exceptional banking services.

The key responsibilities will include:

MAIN DUTIEs:

Leadership & team management:

• Lead, mentor, and manage a team of QA testers and RPA developers, fostering a collaborative and high-performance culture.
• Conduct regular performance reviews, provide constructive feedback, and support professional development for team members.

Quality assurance strategy & continuous improvement:

• Develop and implement comprehensive Qaqa strategies and frameworks that align with the bank’s objectives and regulatory requirements.
• Establish and maintain quality standards for testing processes, ensuring adherence to best practices and industry standards.
• Drive initiatives to enhance the quality of testing, including the development of test plans, test cases, and test scripts.
• Analyze testing metrics and feedback to identify areas for improvement and implement corrective actions.

Automation & efficiency:

• Spearhead the adoption of RPA to improve efficiency across the bank and reduce manual efforts.
• Identify opportunities and drive the implementation of automated testing solutions.

Stakeholder collaboration:

• Work closely with product owners, developers, and other stakeholders to ensure alignment on testing requirements and timelines.

Reporting & documentation:

• Prepare and present regular reports on testing progress, quality metrics, and automation initiatives to senior management.
• Maintain comprehensive documentation of testing processes, results, and automation workflows.

Work experience, skills, and education requirements

• Degree, master’s degree in computer science, technology, finance
• Experience in driving changes with agile methodology.
• Relevant agile certifications or qualification is advantageous.
• Minimum of 7 years of experience in quality assurance, with at least 2 years in a leadership role.
• Proven experience in managing uat processes and implementing rpa solutions in a banking or financial services environment.
• Strong knowledge of testing methodologies, tools, and frameworks
• Familiarity with rpa tools and scripting languages (e.g., python, javascript).
• Excellent leadership and team management skills, with the ability to motivate and inspire a diverse team.
• Strong analytical and problem-solving abilities, with a keen attention to detail.
• Exceptional communication and interpersonal skills, capable of engaging effectively with stakeholders at all levels.
• A proactive mindset with a passion for technology and continuous improvement.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Summary

Responsible for promoting a quality program focused on patient safety, training, standards development, audits, and risk management. Monitor healthcare trends in quality, patient safety, and performance improvement. Stay updated on regulatory requirements for quality assurance and patient safety. Drive continuous service improvements through surveys, audits, and training.

Job Responsibilities

• Manage incidents, customer feedback/complaints, and implement preventive actions.
• Identify and apply improvements in service, clinical quality, and patient safety.
• Develop and conduct training to improve service standards and customer service culture.
• Track and report Quality Indicators (e.g., productivity, customer surveys, incidents).
• Assist in creating and reviewing quality management policies for compliance.
• Ensure compliance with ISO 9001 standards and maintain all relevant policies.
• Work with consultants to achieve and maintain certifications (e.g., ISO 9001, Bizsafe).
• Handle external communications with agencies like MOH/AIC and manage award submissions.
• Perform other tasks as assigned by the Manager/CEO.

Job Requirements

• Minimum Diploma, preferably Degree in any field.
• 3-5 years of experience in quality management, ideally in healthcare.
• Experience in quality assurance, patient safety, and PDPA.
• Knowledge of healthcare regulations and guidelines.
• Experience in Root Cause Analysis and Failure Modes Effects Analysis is a plus.

Apply now by sending your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

Ashley Loo | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)