Job Responsibility

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence.

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Pest Control Technician Full Time S$1,800 - S$2,500 per month

Requirements:-

1. Pest Control Working Experience (at least 1 year)

2. Able to converse and write simple English

3. With Class 3 Driving Licence or Class 2 and own bike prefered

4. Minimum PSLE (Passed Primary Six Leaving Exam) or Lower Secondary

5. Willing to strive and positive learning attitude, take pride of his own work to solve issues 6. Owns a motorbike an added advantage

Job Scope:-

1. Inspect, identify pest infestation and treat pest issues at client's premises

2. To ensure prompt and timely Pest Control Servicing at Customers' premises

3. To carry out ad hoc duties and complaint cases assigned by supervisor and provide support if required

Full Time, Permanent Job

Working hours : 9am - 6pm Mon-Fri, 9am-1pm Sat

Salary depending on qualification and experience

Benefits includes medical/ hospital allowance, insurance coverage, overtime allowance, petrol allowance

Fast hiring upon shortlisted

Interested candidates may wats app to Mr Lim 90693856 or call 90600787

Pls provide Name, Contact, Experience, Expected Salary

Key Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule

• Monitors and responds to customers’ feedback

• Provides oral and written feedback on work activities

• Uses equipment, chemicals, and pesticide/insecticide products

• Performs any other related duties as instructed by the immediate superior.

Job Requirements

• Must possess NEA Vector Control License

• Must possess Singapore Class 3 driving license

Job Highlight

• Company vehicle and training will be provided

• Outdoor environment and island-wide location

• High salary with incentives, overtime, and allowances

• Island-wide location

• Fast hiring and immediate positions

ROLES & RESPONSIBILITIES

• Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/tool box meeting
• Coordinate Environmental Control Committee Meeting and implement all environmental control programs
• Maintain mandatory records and other documentation as required by the regulatory authorities
• Ensure compliance of operations with NEA and EHS regulations
• Prepare Site Environmental Control Report on a regular basis
• Conduct environmental control audit and investigations
• Able to maintain environmental requirements in line with OHSAS 18001:1999
• Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

REQUIREMENT /QUALIFICATION

• Candidate must possess at least Diploma/Degree in Civil Engineering or its equivalent
• Candidate must be a NEA registered ECO
• Must be a registered ECMO
• Minimum 3 years’ relevant experience in Building Construction
• With FSM certificate will be an advantage
• Must have professional knowledge in law and regulations of Environment Acts

Please include the projects you have worked on in your resume

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 7000 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on LinkedIn: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Overall Purpose of The Job

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response

Key Responsibilities and Tasks

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

Desirable

• Deep understanding of and experience in safe operations of Dry Bulk vessels
• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs
• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders
• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events
• Ability to travel freely to/within Australia
• In-depth knowledge of industry standards, assurance & certification programs
• Significant experience in international compliance & certification programs
• Significant experience in engaging and collaborating with multinational / multicultural teams

Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. The people here at Apple don’t just craft products - they build the kind of wonder that’s revolutionized entire industries. It’s the diversity of our people and their ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Join Apple and help us leave the world better than we found it.

Description

The AppleCare Technologies team has an immediate opening for a Cross-Functional Quality Engineer to plan and lead cross-functional testing across complex AppleCare projects. You will be responsible for the planning, preparation, resourcing, execution management, issue resolution, and progress reporting of testing activities across business and technical groups on the project. Through your knowledge of industry best practices for quality management, you will help to evolve the way we approach test planning and execution.

Develop Comprehensive Testing Strategies:

• Quality advocate who will collaborate with business and technical teams to create quality test plans for cross- functional systems projects, focusing on User Acceptance Testing (UAT).
• Design testing structures, defining roles and responsibilities across all regions, Apple organizations, and third-party vendors as needed.

Establish UAT Communication and Coordination:

• Define and manage UAT communication plans, including meeting schedules and escalation processes across global time zones.
• Lead the scheduling and coordination of UAT preparation and execution activities.

Risk Management and Resource Planning:

• Proactively identify technological, organizational, and political risks, developing effective mitigation strategies.
• Estimate resource requirements for testing and ensure realistic plans are in place.
• Ensure the availability of test environments and necessary data to support testing activities.

Optimize Testing Through Automation and Analysis:

• Identify and implement opportunities to leverage automation for test preparation and execution.
• Apply strong analytical skills to investigate and resolve issues discovered during UAT activities.

Minimum Qualifications

• 5-7 years experience leading testing/QA, with emphasis on planning and managing cross-functional testing
• BE / BS Tech in Computer Science or information management from a premier school

Preferred Qualifications

• Experience with test automation tools and frameworks
• Experience with different testing methodologies and driving a quality mindset
• Ability to develop technical expertise and understanding of system interdependencies, and their impacts on testing plans
• Ability to abstract technical details and effectively communicate to audiences at different levels
• Proficient at balancing multiple efforts at a time
• Excellent listening, communication, leadership and presentation skills
• Ability to develop and maintain relationships with internal partners
• Exemplify flexible thinking, curiosity, self-motivation, dedication to quality, focus on the details, and a positive perspective
• Strong organizational and documentation skills
• SAP functional experience, and experience migrating from SAP R/3 to SAP S/4 HANA is beneficial
• Ability to travel up to 10% of the time
• Quality Assurance certification (ISTQB, ASQ, etc) and/or PMI certification is highly desirable

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At ByteDance, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

About the team

ByteDance and affiliate are developing the next-generation high-performance analytical database, with a mission to enable efficient and real-time data-driven decision-making on PB-level data sets. The initial product was forked from Clickhouse, after which large re-architecture had been taken place. The product now not only improves the efficiency of Clickhouse but also fits into the elastic cloud-native infrastructure with better scalability and resource utilization. With years of polishment in the internal EB-level scenarios, we are now ready to serve our business partners via various cloud vendors.

What you will be doing:

- Responsible for quality assurance of data and cloud products, and R&D efficiency improvement.

- Participate in product requirements and architecture design reviews, assess the rationality of the overall technical architecture and related testability.

- Ability to identify system risks in an all-around way, and ensure the stability of the systems through functional testing, performance testing, online monitoring, and other testing approaches.

- Build a data quality assurance system to ensure delivery quality and improve delivery efficiency throughout the entire process.

- In-depth understanding of the business, communicate and collaborate with various roles across teams, to create value for the business in an all-round way, without setting boundaries for work.

- Design and perform tests and check cases to determine if infrastructure components, systems and applications meet confidentiality, integrity, authentication, availability, authorisation, and nonrepudiation standards.

- Translate requirements into test plan, write and execute test scripts or codes in line with standards and procedures to determine vulnerability to attacks.

- Certify infrastructure components, systems and applications that meet security standards.

Qualifications

Minimum Qualifications:

- Bachelor's Degree or above, Computer Engineering, Mathematics, Statistics, Machine Learning, and other related majors

- At least 3 years of data testing experience

- At least 2 years of experience in managing a team

- 2 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- Solid understanding of distributed systems

- 2 years experience with UI and API automation testing and framework.

- 2 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 2 years experience in testing high-traffic distributed systems, and cloud-related products.

- Sensitive to data, with good logical thinking ability, analytical ability, troubleshooting skills, and business understanding ability.

Preferred Qualifications:

- 5 years of data testing experience

- 5 years of experience in managing a team

- 5 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- 5 years experience and solid understanding of distributed systems

- 5 years experience with UI and API automation testing and framework.

- 5 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 5 years experience in testing high-traffic distributed systems, and cloud-related products.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

This role is responsible for ensuring that all construction projects meet specified quality standards, safety regulations, and contractual obligations. The QC professional will monitor processes, perform inspections, and implement quality control procedures.

Key Responsibilities:

• Develop and implement quality control procedures and standards.
• Conduct regular site inspections to monitor compliance with quality standards.
• Review project designs, specifications, and plans to identify potential quality issues.
• Collaborate with project managers and construction teams to resolve quality-related problems.
• Document and report quality issues and non-conformities, and track resolutions.
• Develop training programs for construction staff on quality control measures.
• Ensure compliance with local, state, and federal regulations.
• Maintain quality records and related documentation for audits.
• Conduct material and product testing to ensure compliance with standards.
• Stay updated with industry trends and advancements in quality control practices.

Required Qualifications:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.
• Proven experience in quality control within the construction industry.
• Knowledge of relevant quality control standards and methodologies (such as ISO, ASTM).
• Strong analytical and problem-solving skills.
• Excellent attention to detail and organizational skills.
• Effective communication and interpersonal skills.

Preferred Qualifications:

• Certification in Quality Control or Quality Assurance (such as Six Sigma or CQI).
• Experience with construction software and quality management systems.
• Familiarity with safety regulations and practices.

Work Environment:

• Fieldwork at construction sites with outdoor conditions.
• Occasional office work for documentation and reporting.

$2300 - We are seeking Pest control technicians to join our team!

Contact HR @ 91383851 for an Interview!

Job Scope:

• To manage pest management at various projects across Singapore.
• To ensure all aspects of pest management is adhered to NEA Guidelines.
• Fogging, Misiting, search and destroy of pest.
• Manage client expectations.

Work days: 5.5 Working Days

Work Time: 8.30 to 5pm

Contact HR @ 91383851 for an Interview!

Job Descriptions:

• To take charge of the construction job site environmental matters
• Identify and assess any foreseeable risk at the construction job site
• To recommend measures to eliminate and foreseeable risk at construction job site
• To lead periodic environmental inspections
• To ensure proper housekeeping is in place for safe and tidy job sites
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum Diploma in Engineering
• Registered Environmental Control Officer with NEA
• At least 3 years of experience in building construction projects

Objective

In collaboration with various department to contribute to the optimization of inventory control management through strong governance of processes in monitoring product portfolio.

Relationships 

The position needs to have strong collaboration with Operations, Finance and Logistics team

Key Activities

• Conduct daily stock checks of products and report findings to Inventory Control Supervisor
• Coordinate and follow-up with Retail Operations to resolve inventory issues that require physical checking of stocks
• Assist Inventory Planning Executive in validating count results of cycle counts/Customs stock take (during and after the count)
• Maintain and update records that will be used as references for checking and validation of items
• Assist Inventory Planning Executive in checking SKU’s with source code (EAN/UPC) or price tag issues and report it promptly to Inventory Control superiors
• Liaise with Retail Operations in printing of new price tags for items with incorrect source codes
• Process returns to warehouse in Glob+
• Checks breakages and damaged items at each store and maintain a Liqour Breakage & Damaged Items Monitoring Listing
• Any other duties which may be assigned by immediate superior/Manager from time to time

• Diploma or related qualification in Inventory Management or related discipline
• At least 2 years experience in Inventory Control or Planning from multi-stores retail or travel retail industry
• Proficient with Microsoft Excel (Intermediate level)
• Good business acumen and analytical skills

$2800 - We are seeking Pest control Supervisors to join our team!

Contact HR @ 91383851 for an Interview!

Job Scope:

• To manage pest management at various projects across Singapore.
• To ensure all aspects of pest management is adhered to NEA Guidelines.
• Fogging, Misiting, search and destroy of pest.
• Manage client expectations.

Work days: 5.5 Working Days

Work Time: 8.30 to 5pm

Contact HR @ 91383851 for an Interview!

Our esteemed client, an established MNC, is searching for a Credit Control Executive:

Job Responsibilities:

• Manage the end-to-end legal process for debt collection
• Ensure timely and effective collection of all customer payments.
• Negotiate repayment plans with customers.
• Coordinate with legal representatives to follow up on actions taken against overdue accounts.
• Liaise with repossession agents to manage repossessed assets.
• Maintain communication with clients to ensure outstanding balances are addressed and cleared.
• Resolve internal and external queries related to customers' outstanding balances.
• Process and allocate daily receipts in the accounting system accurately.
• Perform other administrative tasks as assigned.

Job Requirements:

• Diploma or Degree in a relevant field.
• Minimum of 2 years of experience in debt collection or a related role.
• Provide sound advice on appropriate legal actions at various stages of debt recovery.
• Build and maintain strong working relationships with clients, both internally and externally, across all levels.
• Reconcile complex financial accounts with a keen attention to detail.

Additional Information:

• Salary: Up to SGD 3,600 + VB (2-3 Months)
• Working Location: Newton
• Working Hours: Monday to Friday, 08:30 AM - 05:30 PM

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Vector Control Worker/Technician

• Preferably with ITE-NEA Vector Control Worker/Technician Certificate, or willing to attend certification course
• With/Without Class 3 driving license (Will be able to drive home company vehicle if applicable)
• Starting Basic Salary of $1.7K
• Flexi-Work Hours (5 Day Work Week)
• Incentives and Overtime Available

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering) - ALL WELCOME
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 3700 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on LinkedIn: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant biopharmaceutical/ pharmaceutical experience.
• Minimum 2 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599