• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 8 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

EY Assurance group is one of the most trusted, respected and influential business unit in the industry. As part of our team, you will provide our clients including companies, investors and regulators a peace of mind by using your skills and experience to them confidence in the validity of financial statements and business-critical information or processes. Groups (or, as we call them, sub-service lines) within Assurance include External Audit, Climate Change and Sustainability Services, Financial Accounting Advisory Services and Fraud Investigation & Dispute Services.

Join our External Audit team and you will help our clients meet their reporting requirements by providing an objective and independent examination of their financial statements. In addition, you will conduct timely and constructive discussions with the management on accounting and reporting matters and provide a robust and clear perspective to audit committees.

The opportunity

We are seeking a driven and ambitious Manager to join this exciting and fast-growing area of our business. You will play a key role in driving growth by developing new and enhancing existing client relationships, leading highly skilled project teams and delivering a first-class customer experience through high profile engagements. In return for helping us to build a better working world, you can expect excellent career opportunities within a dynamic and collaborative environment.

Your key responsibilities

• Manage assurance engagements by defining the audit strategy in consultation with the senior manager/partner and execute it in compliance with EY's policies and protocols. When required, you'll personally execute complex audit procedures and lead teams or parts of teams on engagements, depending on the size of the engagement.
• Manage projects and engagements profitably by leading the team to perform efficiently.
• Monitor the assurance team's progress against the plan and alter it when needed
• Cultivate and manage business development opportunities. Generate new audit business opportunities by understanding EY and its service lines and actively assess/present ways to apply knowledge and services.
• Coach and develop people by sharing knowledge with team members and helping team members attain experiences that cultivate technical competencies.
• Develop people by encouraging individuals to think for themselves and take responsibility for their contributions to the assurance team.
• Conduct timely performance reviews and provide performance feedback/on-the-job training
• Maintain cooperative relationships with other assurance teams
• Develop and maintain long-term productive client relationships and networks.

Skills and attributes for success

• Work effectively as a team member, sharing responsibility, providing support, maintaining communication and updating senior team members on progress.
• Contribute ideas/opinions to the assurance teams and listen/respond to other assurance team members' views
• Demonstrate professionalism and competence in the audit client's environment.
• Strong written and verbal communication skills
• Good project management skills
• Integrity within a professional environment

To qualify for the role you must have

• A Bachelor's degree in Accounting, Finance, or a related field.
• Obtained CPA Singapore qualification
• At least 6 years of related work experience

Ideally, you’ll also have

• Prior working experience in global professional services organization or mid-tier firms will be highly advantageous

What we look for

Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry. An effective communicator, you’ll be a confident team player that collaborates with people from various teams while looking to develop your career in a dynamic organization.

What we offer

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

Our client is a global manufacturer. Due to business needs, they are now recruiting a Customer Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility of Customer Quality Engineer:

• Analyze and apply customer quality specifications, developing and upholding internal quality benchmarks through APQP methodologies (e.g., Process Flow Diagram, Control Plan).
• Facilitate Built-in Quality workshops, ensuring collaboration with cross-functional teams to achieve and monitor continuous improvements through to completion.
• Lead initiatives to resolve quality issues for new programs (such as Process of Record, Process Change Request, First Time Quality) to enhance performance.
• Chair Material Review Board meetings to address deviations and spearhead corrective actions for non-conformance cases.
• Obtain customer approval for Production Parts and provide support for the initial stages of production.
• Promptly address customer returns by utilizing Six Sigma problem-solving techniques and the 8D approach.
• Capture and document lessons learned for each new program and apply these insights to future projects.
• Ensure adherence to the Quality Operating System throughout product launches.

Requirements:

• Min Degree in Engineering related field
• Minimum 3 experience in Quality and Product Launch
• Knowledge in Automotive industry regulations and standards

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Position title: Warehouse Supervisor
Location: Bukit Merah
Working days: 5 days [ Mon - Fri ]
Working hours: 8:30am - 6pm
Salary : SGD $2,700 - $3,400

Job Description

• The Warehouse Supervisor is responsible for overseeing the daily operations of the warehouse,
• ensuring that all processes are efficient, and that materials and products are handled according to
• GMP standards. This role involves supervising a small team of 2 warehouse assistants, maintaining stock accuracy, and coordinating incoming and outgoing shipments while upholding safety regulations.

Key Responsibilities:

Daily Operations Management:

• Supervise and manage daily warehouse activities, including goods receiving, storage, and dispatch.
• Lead and manage a team of 1 to 2 warehouse assistants to achieve daily operational goals.
• Ensure compliance with workplace safety and health regulations, maintaining a clean and safe working environment. Oversee the cleanliness of level 2, 4, and 5 warehouses, ensuring proper housekeeping standards.

Inventory Control & Documentation:

• Conduct Goods Received Notes (GRN) for all incoming materials.
• Organize and allocate stocks and materials in the correct storage areas
• Generate and paste QC-approved labels on all approved materials.
• Prepare Delivery Orders (DO) and packing lists for outgoing products, ensuring proper packaging standards are followed to avoid damage during transit.
• Monitor inventory levels and alert management when a new Purchase Order (PO) needs to beraised.
• Lead periodic stock counting, adjusting stock records as needed after approval from the Production Manager.
• Manage stock transfers among warehouses as well as internal departments and coordinate with subcontractors for rework materials.

Team Training & Development:

• Provide GMP (Good Manufacturing Practices) and in-house training to warehouse assistants, ensuring team members adhere to company standards and support team members in achieving daily and long-term operational objectives.
• Suggest and implement improvements to warehouse processes to enhance efficiency and reduce waste.
• Monitor and support in disposal, waste segregation and waste management activities as per NEA requirements.

Stock Monitoring & Reporting:

• Monitor inventory for missing or lost items and report any discrepancies to management promptly.
• Coordinate the receipt, storage, and dispatch of products and materials, ensuring accuracy and timely processing.
• Generate product labels as per customer requirements and ensure correct labelling for outgoing shipments.

Requirements

• Minimum 'O' Level or equivalent.
• At least 2-3 years of experience in warehouse operations, preferably in the FMCG industry.
• Knowledge of GMP and warehouse safety protocols.
• Proficient in warehouse documentation and processes, familiar with inventory management and stock control systems.
• Knowledge of SAP system will be an advantage
• Must have a valid forklift license.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Working Days: 5.5 Day A Week (Monday – Friday), Saturday need work half day (can claim OT)
• Working Hours: 8:30am -5:30pm
• Office at City Hall, working at site (Island wide, depends on project)
• Salary: $4800 - $6200

Requirements:

• Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO.

Responsibilities:

• To assist the Project Manager in implementing the safety management system to ensure staff and workers work in a safe and healthy environment.
• To assist the Project Manager in implementing the permit to work system and to stop & report to the project manager any incompatible works relating to the same.
• To act as the secretary of the Project WSH Committee and chair the meeting such that the staff and subcontractors are aware of the site activities and the required actions.
• To assist the Project Manager in complying with the WSH Acts and Regulation.
• To conduct periodic safety inspection to verify level of safety compliance so that the safety standards are constantly improved.
• To ensure site compliance with statutory safety requirements and in-house safety rules and regulations and to report any deviations to the Project Manager for management consideration.
• To recommend to the Project Manager any necessary corrective measures to be taken on safety non-compliance and deviations to enhance the site safety.
• To update site management on any new or changes to current statutory safety requirements and take the necessary actions.
• To investigate any accident/ dangerous occurrence/ incident and recommend corrective measures to prevent recurrence.
• To liaise with officers from MOM/NEA /PUB on matters pertaining to safety, mosquito breeding, ECM etc and take the necessary action for their comments.
• To conduct safety training and organise safety promotional activities.
• To ensure safety documentation is kept current and ready for MOM, NEA or ISO Audit.
• Carry out the works assigned for compliance with requirements of ISO 9000, ISO 14001 and OHSAS 45001
• Be involved in the evaluation of risk assessment and plan, manage and review Management Programmes.
• Be involved in all the sub-con safety and health matters pertaining to the site.
• Prepare and submit the site environment control Programme and ensure that the staff and workers are aware and understand the intention.
• Inspect the site to ensure that all facilities and equipment relevant to the maintenance of the environment health are in working condition.
• Assist the authority to investigate outbreaks of infectious, vector-borne disease.
• Organise campaigns, training course to develop and sustain the interest of workers in maintaining good environment health standards.
• To assist the Project Manager in the management of the workers e.g. their courses, reporting sick, home leave, accommodation.
• To assist in achieving the safety standards required by the site’s developer.
• Be involved in safety aspects for planning of activities that are in view of the public or in area that the public uses.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Quality Engineer

Internal Code: A24096

Why join us?

• Opportunity to drive impactful change and shape the quality standards of government IT projects.
• Collaborate with multiple internal and external stakeholders, influencing the delivery of robust and user-centric solutions.
• Be part of a dynamic team that values continuous learning, innovation, and professional development.

What will you do?

• Are you passionate about ensuring the quality and reliability in government IT projects?
• We are seeking a dedicated professional to champion quality assurance and testing practices across government agencies, driving impactful change and ensuring the delivery of robust, user-centric solutions.
• You will be part of the Quality Assurance and Testing team to support the work of our colleagues at the various agencies through establishing QA and Testing processes, best practices, implement tools and test automation.
• Define and maintain QA and Testing processes, including Test Management, Defects Management and Code Quality
• Coach and mentor Government IT Business Analysts and end users on QA and testing processes, fostering a culture of quality and excellence within government IT teams.
• Work with selected projects at government agencies, championing product quality and software testing practices in agile/waterfall project delivery.
• If you are ready to make a meaningful impact and drive the culture of quality and excellence in government IT projects, we invite you to join our team and be part of a transformative journey towards delivering reliable and user-centric solutions for the community.

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or related discipline.
• Minimum 5 years of experience in establishing test strategies for systems in agile development environments.
• Profound knowledge of various test types, levels, techniques, methodologies, and test automation, with a strong understanding of test-driven development and continuous integration/delivery principles.
• Hands-on test automation experience and the ability to integrate test automation into the Continuous Integration chain.
• Experience in QA Management for the system delivery and Certification in Testing and Software Quality Assurance will be a bonus.
• Organized, methodical, and meticulous in planning, management, and execution, with a strong focus on attention to detail and problem-solving.
• A team player who is self-motivated, proactive, and customer-oriented, with excellent communication and presentation skills.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Job Scope:

• Design and develop automated systems and processes to improve efficiency and productivity
• Program and configure automation hardware and software, including PLCs and SCADA systems
• Conduct system testing and troubleshooting to ensure optimal performance
• Collaborate with cross-functional teams to integrate automation solutions into existing systems
• Analyze data and system performance to identify areas for improvement
• Maintain documentation for automation processes, including specifications and user manuals
• Implement safety and quality standards in automated processes
• Provide technical support and training for end-users
• Stay updated on industry trends and emerging technologies in automation
• Participate in project planning and management activities, ensuring timelines and budgets are met

Requirements:

• Diploma or Degree in engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background
• Proven track record in automation work is advantageous
• Required hands-on experience and remote support skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

• Singapore Based (Islandwide)
• 5.5 Days (8.30am to 5.30pm), Saturday half day (Can claim OT $20/hour)
• Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO.
• Career Progression Opportunities

Requirements

• Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO.

Roles & Responsibilities

• To assist the Project Manager in implementing the safety management system to ensure staff and workers work in a safe and healthy environment.
• To assist the Project Manager in implementing the permit to work system and to stop & report to the project manager any incompatible works relating to the same.
• To act as the secretary of the Project WSH Committee and chair the meeting such that the staff and subcontractors are aware of the site activities and the required actions.
• To assist the Project Manager in complying with the WSH Acts and Regulation.
• To conduct periodic safety inspection to verify level of safety compliance so that the safety standards are constantly improved.
• To ensure site compliance with statutory safety requirements and in-house safety rules and regulations and to report any deviations to the Project Manager for management consideration.
• To recommend to the Project Manager any necessary corrective measures to be taken on safety non-compliance and deviations to enhance the site safety.
• To update site management on any new or changes to current statutory safety requirements and take the necessary actions.
• To investigate any accident/ dangerous occurrence/ incident and recommend corrective measures to prevent recurrence.
• To liaise with officers from MOM/NEA /PUB on matters pertaining to safety, mosquito breeding, ECM etc and take the necessary action for their comments.
• To conduct safety training and organise safety promotional activities.
• To ensure safety documentation is kept current and ready for MOM, NEA or ISO Audit.
• Carry out the works assigned for compliance with requirements of ISO 9000, ISO 14001 and OHSAS 45001
• Be involved in the evaluation of risk assessment and plan, manage and review Management Programmes.
• Be involved in all the sub-con safety and health matters pertaining to the site.
• Prepare and submit the site environment control Programme and ensure that the staff and workers are aware and understand the intention.
• Inspect the site to ensure that all facilities and equipment relevant to the maintenance of the environment health are in working condition.
• Assist the authority to investigate outbreaks of infectious, vector-borne disease.
• Organise campaigns, training course to develop and sustain the interest of workers in maintaining good environment health standards.
• To assist the Project Manager in the management of the workers e.g. their courses, reporting sick, home leave, accommodation.
• To assist in achieving the safety standards required by the site’s developer.
• Be involved in safety aspects for planning of activities that are in view of the public or in area that the public uses.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

The Payments Controls organization is seeking a Associate to join the Global Regulatory Developments and Engagement (GRDE) function to deliver on GRDE specific engagements and execute on regulatory and control activities. As an Associate you will focus on monitoring, identifying and understanding Regulatory Changes impacting Payments, and engage with the business and other stakeholders through the regulatory change life cycle.

Job Responsibilities:

• Data Analytical Support for Compliance Risk Assessment (CRA) – Troubleshoot issues, bug fixes and answer queries from team.

• Support CRA data generation, validation, upload and sync with CCOR (Compliance, Conduct and Operational Risk)

• Build automation processes and reports for CRA

• Address queries related to CRA and work with the broader team to address any identified data quality issues

Required Qualifications, Capabilities & Skills

• 5 + years of experience in banking, finance, or related fields with exposure in payments system/fintech/data management.

• Experience working in Regulatory or Control function

• Bachelor’s degree in Information Technology, Engineering, Science of other related disciplines

• Excellent skills in database and BI with strong knowledge of SQL

• Working knowledge of API and capable to build small Web Service from scratch

• Strong analytical and problem-solving abilities.

• Attention to detail and a commitment to data accuracy.

Preferred Qualifications, Capabilities & Skills:

• Working knowledge of AI/ML technology. Capable to use LLM to build applications highly desirable.

• Excellent skills in database and BI with strong knowledge of QlikSense,VBA,Access/VBA , SAS, R

This role is intended to be for an initial term of approximately 12 months only, however, subject to business needs, the contract may be extended or converted to permanent employment.

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=c763f66ad3f58385677742eaa2e98b33

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24110

• We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.
• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.