Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Software Quality Assurance (Audit, QA)

Our Esteemed and Reputable Client is looking for an Software Quality Assurance (Audit, QA)

Requirements:

• Solid experience in handling Projects Audit/ Quality Assurance and Checks.
• Strong experience in handling Quality Assurance and Software Governance.
• Good track record handling Quality Assurance Projects and Timeline.
• Involved in Projects Audit and Checks.
• Sound knowledge in handling quality improvement practices and processes on Projects.
• Experience in handling IT Quality Assurance, Process Improvement, Software Testing and Methodology.
• Minimum 3- 5 years of Software Quality Assurance and Audit Checks on Projects.
• Experience in performing Audit Checks on Projects
• Involved in handling Projects Quality Audit.
• Responsible for Project Audit/ Quality Management System procedures and processes.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Quality Assurance Team

Reports to: Senior QA Engineer

Function: Global QA

Work Location/Site: Singapore / GHQ

Internship Duration: Any 3 months between January to May 2025

Role Overview

The QA intern will support the quality and various project teams with validation needs in MasterControl, our cloud-based Quality Management System (QMS) for HSO.

Duties and Responsibilities

• Assist to perform validation duties to ensure software validation project and corresponding deliverables adhere to current regulations and quality standards
• Actively contribute towards continuous improvement of the quality team by suggesting new ideas and promoting innovative culture through improving and optimizing analysis of quality data and process workflows
• Provide support to record management and archiving activities
• Support post-migration and improvement activity works for the QMS
• Assist with QMS Modules improvement and maintenance activities
• Participate in team activities and initiatives related to QMS and regulatory requirements
• Other duties as assigned

Requirements

Experience

• N/A

Skills/Accreditations

• Microsoft office skills essential. Candidates with Excel Macro skills preferred
• Some Quality system knowledge will be advantageous
• Self-awareness and Good work ethics
• Strong communication and interpersonal skill

Academic Qualifications

• Pursuing Diploma or Degree Preferably in Science or Engineering

Travel requirements

• N/A

By submitting your application, you agree that your personal data will be collected, disclosed, and retained by HOYA Group for assessing suitability for employment and verification purposes.

We regret to inform you that due to the number of applications received, only shortlisted applicants will be notified. Thank you for your kind understanding.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

We are looking for a QA Engineer proficient in Automation Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration.
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes.
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement.
• Integrate automated tests with CI/CD pipelines.
• Identify areas where automation can improve operational efficiency and reduce manual intervention.
• Document automation processes, test cases, and results for reference and auditing purposes

Requirements

• Tertiary education in Computer Science or related field.
• Min 3 years’ experience in automation development using Python / Selenium / Appium.
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50775 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Master's Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• Experience in Optomechanical design including knowledge of optical principles, components and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc.
• Strong and thorough knowledge of quality engineering discipline, including:
• Quality data collection and data analysis
• Understanding of statistical methods, including population sampling, hypothesis testing
• Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description:

• Updating and maintaining records and documentation for the ISO 9001, ISO 14001, and ISO 13485 systems.
• Manage internal and external audit system as well corrective action reporting system.
• Monitor and review supplier performance to address non-conforming materials.
• Work closely with production team on internal process and quality issue.
• Coordinate the review of quality procedures and manage the inspection standard on incoming, in process and outgoing inspections.
• Handling customer complaints and ensure all corrective actions to customers are implemented and documented.
• Plan regular internal inspections in accordance with relevant procedures.
• Perform another related task as assigned.

Job Requirement:

• Good interpersonal and communication skill
• With working experiences from tooling fabrication or plastics injection molding industry preferred
• Good knowledge of ISO 9001, ISO 14001, ISO 13485 and ISO 22301 quality system
• Knowledge in supplier management
• Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Job Summary

Plan, co-ordinate and oversee all QA support activities and initiatives in the work cell. To improve process capabilities and product quality to meet the desired targets.

Job Description

• Oversee the product quality from assembly to packaging process and ensure full compliance to the Quality System and regulation requirements.
• Champion data-driven decisions to resolve non-conformances, complaint investigation, CAPA, deviation and other quality matters in a timely manner.
• Interfaces with R&D, unit quality, customer quality engineer to formulate plans and actions to meet product specifications and quality requirements
• Drive quality improvement/automation projects through project planning, scheduling inspection/testing activities, performing analysis and publishing reports.
• Perform test method validation, installation qualification, correlation study for new quality equipment/test method.
• Act as a support role for regulatory, external, internal and/or supplier audits and lead the value stream members to execute the corrective actions for compliance with customer specifications.
• Perform data analysis and trending for product quality performance through monthly and quarterly management review meeting.
• Establish and maintain effective system and procedures to ensure that all manufacturing and engineering documentation are controlled and updated per established regulatory requirements.
• Supervise quality technical specialist and a group of technicians on quality tests and checks.
• Safety & ISO 14001 Environmental accountability: Ensure a safe, healthy and environmentally-friendly workplace by observing Company's rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
• Perform any other tasks as assigned.

Preferred Requirements

• Minimum 3 to 5 years relevant working experiences in a quality engineer role.
• Demonstrated good understanding of key elements of Quality Management system, CFR Part 820, ISO 13485.
• Have prior experience in managing quality improvement projects would be an added advantage
• Able to effectively multi-task and work independently with a high level of initiative

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

[1 year contract, renewable]

As a Software Quality Engineer, you'll enhance software delivery and quality by designing, implementing, and maintaining comprehensive testing coverage from development through production. You'll focus on creating automated test scripts rather than just finding bugs, helping developers improve their own processes. Your role involves working in agile teams, tackling a variety of technical challenges, and performing exploratory testing to identify risks. This position offers rapid career growth and access to cutting-edge technologies and extensive infrastructure.

Responsibilities:

· Build advanced automated test suites to exercise our world-class applications.

· Work with the development and other engineering teams to automate testing, applying risk-based strategy.

· Conduct static and dynamic application security testing (SAST) and (DAST).

· Conduct load and performance testing to identify application bottleneck.

· Conduct research on emerging technologies related to application quality.

· Analyse and decompose complicated software systems and design a strategy to test these systems.

· Work with Product Owner and Business Analyst to craft out user story acceptance criteria.

· Conduct application performance and security testing to ensure we have a robust and secured system in place.

· Implement and maintain regression test suite in QA nightly build.

· Actively refine smoke test suite in Development CI environment.

· Lead system integration testing with other system owners.

· Manage user acceptance testing/alpha testing and defect life cycle.

· Drive continuous improvement in Agile testing practices and tools.

· Ability to interpret the application source code and experience of using different cloud providers services such as AWS, AZURE and GCP

Qualifications:

· Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Min 5 years’ experience in one or more of the followings: Application exploratory testing and regression test automation

o Application performance testing

o Application security testing

o Strong analytical skills.

· Meticulous attention to details.

· Good interpersonal skills such as tactfulness.

· Good presentation and listening skills.

· Experience in agile development environment will be an added advantage.

· Experience with open-source automated testing framework like Playwright, Cypress, Robot Framework, Cucumber, Appium, Selenium or enterprise level testing tools (Tricentis QTest/TOSCA, Micro Focus UFT or Micro Focus ALM/Quality Center) will be an added advantage.

· Experience with open-source performance testing tools like K6, JMeter, Locust or enterprise level testing tools (Micro Focus LoadRunner) will be an added advantage.

· Experience with open-source security testing tools like ZAP, Burp Suite, SQL Map, Clair, etc or enterprise level security tools (Mirco Focus Fortify On Demand, Prisma Cloud, Veracode, Nessus or CheckMarx) will be an added advantage.

· Experience to setup the pipeline with CICD tools, such as GitLab, Bamboo and etc.

· Certified Software Testing Professional and/or Certified Software Quality Analyst and/or CREST/OSCP certification will be an added advantage.

The Company

At IRVINS, you'll join Singapore's high growth homegrown consumer food brand expanding quickly on the global stage, with 5 offices and 19 markets worldwide, and a product lineup that redefines the food industry.

Founded in 2008, over the years we have pivoted and evolved from an F&B restaurant into a modern food CPG startup. With IRVINS’ global reach, category and market leadership, and startup mentality, we welcome people with a builder attitude keen on building things from scratch and help turn a homegrown brand into Singapore’s iconic global consumer brand.

The Operations Quality Specialist is responsible for ensuring the quality and safety of products in a food manufacturing environment. This role involves monitoring production processes, conducting quality checks, enforcing compliance with regulatory and internal standards, and driving continuous improvement initiatives to enhance product quality and operational efficiency.

Responsibilities:

Quality Assurance & Control:

• Perform routine quality inspections and audits across all stages of the production process, including raw materials, in-process, and finished products.
• Monitor adherence to Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), and food safety protocols.
• Review the tests method and analysis using established quality control methods, ensuring products meet defined specifications and standards.
• Responsible for the Batch record review and perform the release of the product. Work closely with production and supply chain team to ensure the market demand is fulfilled.
• Document and report non-conformities and collaborate with relevant teams to implement corrective and preventive actions.
• Support the new product initiative with different stakeholders, ensure the quality of the product is compliance to the product specification
• Managing the equipment calibration used in QC & Production, to ensure the calibration is up to date and maintained.
• Review and manage the GMP audit, to ensure the GMP requirement is maintained and at audit ready status.

Regulatory Compliance:

• Ensure compliance with GFSI standard and regulations (e.g. BRCGS, FDA, HACCP) and company policies.
• Assist in preparing for and participating in regulatory and third-party audits.
• Maintain accurate and up-to-date records for traceability and regulatory purposes.

Process Improvement:

• Identify areas for quality improvement and work closely with production teams to enhance processes.
• Participate in root cause analyses and contribute to continuous improvement initiatives.
• Develop and deliver training sessions for staff on quality standards and food safety practices.

Collaboration & Communication:

• Serve as a liaison between the Quality Assurance and Operations teams to ensure seamless communication and alignment on quality objectives.
• Provide feedback and recommendations to production staff and management on quality-related issues.
• Support new product development and changes in production by evaluating potential quality impacts.

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

As an Operational Control Analyst for the Asia Rice Platform, your role is to be a key financial partner to the platform, and be primarily responsible for timely reporting, monitoring and analysis of the Business Results and Exposures. You are required to understand the trade flows, strategies and to produce commentary and analysis as and when required. You will be responsible for the monthly closing process and working closely with near-shore Accounting. You will also be involved in IT and Process Improvement/Efficiency projects, and play an important role from a business operations perspective, collaborating closely with multiple stakeholders such as Commercial team, Execution team, Finance team, IT team who may be stationed across different countries.

Main Responsibilities:

• Prepare, monitor and analyse the Trading Positions, Weekly P&Ls, FX Exposures, Cashflow Forecast for the Asia Rice businesses
• Provide commentary and analysis on Desk/Platform performance
• Keep abreast of business strategies, operations, and market news to be aware of risks on business results or misconducts
• Prepare regular updates on landing for current FY and budget process for upcoming FY
• Provide any ad-hoc analysis upon Platform/Region’s request to support business decision making
• Liaise with Near-shore Accounting team to ensure accurate month-end closing in accordance with internal deadlines and reporting requirements
• Collaborate and communicate with stakeholders from other departments such as Commercial, Execution, Finance and IT team
• Propose/Champion/Participate/Collaborate with colleagues in other Departments in business process improvement initiatives or regional projects to align/streamline processes in line with LDC’s Trade to Cash Principles

Experiences:

• 2-3 years of experiences in Product Control/Business Analysis/Management Accounting/Audit
• Working knowledge of Financial Markets, in particular Commodity and Foreign Exchange Markets
• Highly proficient with Microsoft Excel
• Knowledge of SQL and PowerBI is a plus
• Strong analytical skills with a keen eye for details
• Good business sense with high level vision
• Ability to identify/control weaknesses and implement process improvements
• Strong verbal and written communication skills, ability and willingness to interact effectively with all levels of employees & management
• Ability to handle/ prioritize multiple responsibilities
• Ability to work in a fast-paced environment
• Independent self-starter who takes initiative, and has a proactive attitude toward problems and issues
• Flexibility on working hours during periodic closings

Academics:

•  Degree in Business/Accounting/Economics or related field of study

Overview / Brief

Louis Dreyfus Company is a leading merchant and processor of agricultural goods. Our activities span the entire value chain from farm to fork, across a broad range of business lines, we leverage our global reach and extensive asset network to serve our customers and consumers around the world. Structured as a matrix organization of six geographical regions and ten platforms, Louis Dreyfus Company is active in over 100 countries and employs approximately 18,000 people globally.

Diversity & Inclusion

LDC is driven by a set of shared values and high ethical standards

Diversity is part of our DNA. LDC strives to create a diverse and inclusive work environment where people can thrive regardless of gender, sexuality, ethnicity or background.

Sustainability

Sustainable value is at the heart of our purpose as a company

We are passionate about creating fair and sustainable value, both for our business and for other value chain stakeholders: our people, our business partners, the communities we touch and the environment around us.

As an Operational Control Analyst for the Asia Rice Platform, your role is to be a key financial partner to the platform, and be primarily responsible for timely reporting, monitoring and analysis of the Business Results and Exposures. You are required to understand the trade flows, strategies and to produce commentary and analysis as and when required. You will be responsible for the monthly closing process and working closely with near-shore Accounting. You will also be involved in IT and Process Improvement/Efficiency projects, and play an important role from a business operations perspective, collaborating closely with multiple stakeholders such as Commercial team, Execution team, Finance team, IT team who may be stationed across different countries.

Main Responsibilities:

• Prepare, monitor and analyse the Trading Positions, Weekly P&Ls, FX Exposures, Cashflow Forecast for the Asia Rice businesses
• Provide commentary and analysis on Desk/Platform performance
• Keep abreast of business strategies, operations, and market news to be aware of risks on business results or misconducts
• Prepare regular updates on landing for current FY and budget process for upcoming FY
• Provide any ad-hoc analysis upon Platform/Region’s request to support business decision making
• Liaise with Near-shore Accounting team to ensure accurate month-end closing in accordance with internal deadlines and reporting requirements
• Collaborate and communicate with stakeholders from other departments such as Commercial, Execution, Finance and IT team
• Propose/Champion/Participate/Collaborate with colleagues in other Departments in business process improvement initiatives or regional projects to align/streamline processes in line with LDC’s Trade to Cash Principles

Experiences:

• 2-3 years of experiences in Product Control/Business Analysis/Management Accounting/Audit
• Working knowledge of Financial Markets, in particular Commodity and Foreign Exchange Markets
• Highly proficient with Microsoft Excel
• Knowledge of SQL and PowerBI is a plus
• Strong analytical skills with a keen eye for details
• Good business sense with high level vision
• Ability to identify/control weaknesses and implement process improvements
• Strong verbal and written communication skills, ability and willingness to interact effectively with all levels of employees & management
• Ability to handle/ prioritize multiple responsibilities
• Ability to work in a fast-paced environment
• Independent self-starter who takes initiative, and has a proactive attitude toward problems and issues
• Flexibility on working hours during periodic closings

Academics:

• Degree in Business/Accounting/Economics or related field of study

Job Objective:

• Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:

• System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
• Study the schematic drawings to understand the technical & functional requirements to implement each solution
• Assist in after sales services

Education Qualification:

• ITE/ Diploma in IT/Engineering/Audio Visual

Optional Certification

• Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP)
• Kramer Control System Designer (301), Kramer Control System Programmer (302)
• Dante Level 1 & 2, Cisco CCNT, CCNA

Experience:

Mandate

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution.
• Experience in Crestron, Extron, AMX, Kramer automation programming

Good to have

• Experience in DSP programming
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, EV, Poly, Cisco, Logitech, etc

Opportunity

1. Acquiring wide and in-depth technical knowledge from renowned manufacturer products
2. Engagement with end users and manufacturers to further enhance communication skills
3. Acquiring skills through Training with Seniors and manufacturers
4. Job rotation will be given for excellent performance

Job Responsibilities and Duties

• Ensure Earth Control Measure are according to Qualified Erosion Control Professional's design
• Assist Qualified Erosion Control Professional to monitor earth control throughout various stage
• Supervise the Earth Control Measures implemented accordingly
• Any other matters related to earth control

Requirements (Qualification & Experience)

• Must be a registered Earth Control Measures Officer with IES
• Possess Earth Control Measures Officer certificate and license
• Willing to work in West region of Singapore
• Minimum 3 years’ of relevant working experience in a construction firm

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Operational Support: Provide consistently stellar operational support for equity swaps, equity executions, and equity derivative products.
• Trade Capture and Reconciliation: Manage trade capture, reconciliations, lifecycle management, and corporate actions for listed and OTC equity/equity derivative products.
• Sales and Trading Desk Support: Investigate and resolve issues and inquiries from the Sales and Trading Desks.
• Problem Solving: Utilize critical thinking and problem-solving skills to provide timely resolutions to client issues and breaks.
• Stakeholder Collaboration: Work closely with a wide range of stakeholders both within operations and outside of operations, including compliance, credit, sales, trading, legal, risk, and technology.
• Process Improvement: Exhibit proactivity to improve processes and enhance controls to mitigate operational risk to the firm.
• Team Contribution: Be a strong individual contributor while actively participating as a team player to achieve collective goals.
• Project Management: Manage ad-hoc projects and liaise with both internal and external counterparts in different regions.

Interested applicants please send your resume in MS Word format and attention it to Rachel Yeo (R22104385).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R22104385

Business Registration Number: 200611680D. Licence Number: 10C5117

Job duties:

• Creating strategic business development plans to hit sales target for selling Direct Drive Rotary Motors, Linear Motors, and other motion control components
• Hunting for new customers and gathering market insight
• Understanding client needs and able to create presentations with strong product knowledge
• Making deals with customers and ensuring alignment with company plan
• Making proposals and product demonstrations to clients
• Coordinating with all related stakeholders to improve components offering & good sales strategies
• Degree in any field
• Strong business development experience and knowledge for motion control technologies
• Basic Salary up to $9000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

Support the HOD in managing all aspects of risk involving market, liquidity, credit and operational risk.

Assure controls are operating effectively and assist in improving risk control management frameworks,policies,guidelines/procedures and communicating to stakeholders. Responsibilites include but not limited to the following:

• Primary reviewer in charge of new case review, and perform independent credit assessment of credit cases submitted by the front desk business department.
• Perform independent annual credit review of exisiting credit cases (ie. annual and ad-hoc credit reviews).
• Monitor the submission of annual credit reviews to ensure that all the existing credit files are reviewed promptly and timely.
• Perform the periodic risk reports (daily, monthly,quarterly,semi-annual and annual) in accordance with the Routine Report List, and complete credit risk related stress tests.
• Monitor and control market risk, such as FX exposure, bond price, interest fluctuation, hedge effectiveness and etc.
• Complete market risk analysis report,related stress test and provide recommendations to improve the branch's management of market risk.
• Assist in monitoring and control liquidity risk, complete the liquidity stress test and related analysis report.
• Manage the process for developing and enhancing risk policies and procedures, risk indicators, risk limits and approval authorities, to ensure they are in compliance with MAS regulations and policies of Head Office.
• Manage Head Office reporting and enquiries.
• Manage MAS enquiries, internal and external audit enquires.
• Perform ad-hoc duties assigned by the HOD and/or Management.

Requirements:

• Minimum 15 years of enterprise risk management experience predominantly in credit risk market risk, liquidity risk and operational risk in the banking industry.
• Possess a degree in finance with a Master degree in business administration preferred.
• Proficient in Bloomberg, Microsoft Excel or other statistical tools, having ability in programming like VBA, Python etc is preferred.
• Proficient in Mandarin as incumbent having ability to review documents both in English and Chineses is also to correspond with Chineses corporates aas well as colleagues in Head Office.
• Analytical and strong quantitative skilss with good eye for detail.
• Have initiative spirits to conquer the new and complex problems.
• Ability to work under pressure and a good team player and group leader.