General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

· Position : Quality Assurance Executive (FMCG/Food)

· Location : Fishery Port Rd (West - Transport Provided)

· Working hours : Monday - Friday 8:00 am – 5:00 pm

· Salary (commensurate with experience) : Up to $3800 + Meal Allowances + Phone Allowances + Performance Bonus + 14 Days Annual Leave

· Duration : Permanent

· Industry : Food Manufacturer/Supplier

Main Responsibilities:

· Implementation, administration, updates Quality Assurance manual and procedures, policies, programs and systems.

· Audit and inspect overall factory condition according to AVA, HACCP requirement

· Lead in sustaining SFA- ISO 22000/HACCP yearly surveillance audit

· Report factory daily products safety and hygiene performance, analyse and provide assurance to top Management

· Record all QC documents in factory and whole company

· Analyse quality of raw and finished products

· Establish necessary procedures or work instruction to accommodate inspection needs

· Ensure production process is under control as specification

· Conduct suppliers’ quality audits for compliance, prepare quality and feedback reports.

· Assists in resolving customer quality and safety concerns

· To liaise with authorities (eg, SFA) on related Food Safety / License issues when required.

· Conduct hygiene training, daily inspection of process workers, process rooms and related areas

· In charge of health certificate application and laboratory reports arrangement and maintenance of such records.

· Audit critical categories for quality integrity and food safety.

· Any other QA/QC duties as assigned by the company

Requirements:

· Diploma/Degree in Food Science/Food Technology/Microbiology or related disciplines.

· Minimum 1-3 years of relevant working in Quality and Regulatory related field in Food, preferably from FMCG

· Knowledge of Food/Product regulatory requirement and registration/licensing requirement

· Familiar with manufacturing/sampling processes and retailer QA/QC practices

· Experience in HACCP/ISO 22000 and Food safety is preferable.

· Familiarity/experience in internal auditing is preferred

· Bilingual in English and Mandarin to converse with Mandarin speaking associates

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

**We do not charge our candidates any referral fee nor bind them with any contract.**

Diana Okta Tio

Deputy Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Support Project Management and Quality Assurance matters for EHS department
• Assist in daily operations of the Environmental Services.
• Follow up with laboratories to receive results on time
• Prepare draft report

Specific responsibilities:

• Support Project Management – Follow up with clients, reports etc
• Ensure that all operations are conducted within client and recognized industry health and safety requirements
• Lead Quality Assurance matters – Review reports
• Ensure that the Department Quality System is fully implemented
• Co-ordinate with Laboratory employees for quality testing and client’s requirement.
• Assist in the day-to-day operations of the Environmental Services.
• Perform any tasks as and when required by management.

Requirements:

• Graduate in Environmental Science/Engineering or equivalent
• Prior experience in field work for Environmental related services or testing is an advantage.
• Able to work independently and to coordinate several activities simultaneously
• Good communication, negotiation and interpersonal skills
• Able to maintain highest quality standard all the time
• Able to maintain good turnaround time (TAT) and on time delivery (OTD)
• Technical knowledge and experience in related field and in using quality management methods and tools
• Able to interact with all levels of management, suppliers and clients
• Works well under pressure, challenges status quo

Job Responsibilities

. Provides administrative support to ensure efficient operation of office.

. Carries out administrative duties such as filing, typing, copying, binding, scanning etc.

. Exhibits polite and professional communication via phone, e-mail, and mail.

. Supports team by performing tasks related to organization and strong communications.

. Contributes to team effort by accomplishing related results as needed.

Requirements

. Able to speak and write in both Chinese and English.

. 1 years working experience as an admin.

. Able to work independently with minimum supervision.

. Responsible, mature and well-groomed.

. Good communication skills.

Working Hours

Monday to Friday : 8.30am - 5.30pm

OPERATIONAL

To design and perform detailed designing for machine electrical control systems.

To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART FACTORY TECHNOLOGIES & AI PLATFORM

To undertake robotics programming or programming as well as commissioning on the Industrial Robots, MIR and other collaborative robotics systems.

To Conduct 2D and 3D camera application evaluations.

To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

Responsibilities:

• Monitor and manage overdue accounts, ensuring timely collection of outstanding debts through phone calls and emails.
• Prepare and send monthly statement of account and reminder letters to customers.
• Generate monthly AR aging reports and provide updates on account collection status.
• Investigate and resolve balance discrepancies, performing account reconciliations as needed.
• Set up new customer accounts and maintain accurate, up-to-date customer account information in the System.
• Handle additional tasks and ad hoc duties as required.

Requirements:

• Diploma/Degree in Accounting/Finance/Business
• Prior experience in credit control and collections is advantageous
• Strong communication skills and confidence in engaging with customers
• Proficiency in MS Office applications
• Ability to work independently while being a strong team player

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Responsibilities:

· Perform QC inspection at various stages of production and identify non-conformance quality issues.

· Perform QC inspections on incoming, WIP and outgoing parts in accordance with work instructions

· Liaise with relevant stakeholders for any material quality-related issues and closely follow-up effectiveness and closure of corrective actions.

· Collaborate with the Engineering team to define and implement quality control requirements.

· Prepare QC report and status update to relevant stakeholders.

· Maintain all QC document master list including including Mill Certificate / test report for all materials used in project.

· Maintain calibration status of Company’s equipment.

· Familiar with welding process such as SMAW, GTAW, SAW

· Any other ad-hoc duties as assigned.

Requirements: ·

· Minimum Diploma in Quality Engineering / Mechanical Engineering or equivalent

· Possess strong analytical skillsand meticulous individual

· Proficient in Microsoft Office

· Able to work both independently and as a team.

· Knowledge of ISO 9001, 14001, 13485 & 45001, FDA will be an advantage

· Preferable if able to commence work immediately

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

• planning and organising production schedules
• assessing project and resource requirements
• estimating, negotiating and agreeing to budgets and timeline with clients
• ensuring that health and safety regulations are met
• determining quality control standards
• overseeing production processes
• selecting, ordering and purchasing materials
• organising the repair and routine maintenance of production equipment
• liaising with buyers
• supervising and managing day-to-day work of junior staff and production workers in factory environment
• organising relevant training sessions
• ensure project goals are being met within approved budget.

REQUIREMENTS

• Min Diploma in management
• Min 2 years supervisory experience and 1 year experience in similar industry (manufactuing)
• PC literate
• Well organized & a team player
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• Extensive knowledge on safety processes

Quality Assurance Engineer shall be responsible for leading a team of QA personals, maintain quality assurance protocols in a shipyard environment. Manage day to day inspections onsite and shall be the liaison between shipyard construction teams and client pertaining to quality assurance matters.

Job Description:

• Minimum 10 years of work experience in Rig Construction Industry (Oil & Gas Shipyard Environment)
• Must possess experience of working & managing Quality assurance matters in rig upgradation / repair assignments in shipyard environment.
• To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support the plan.
• Manage and coordinate Material arrival inspections and sign-off
• Audit vendors' compliance to organizations and regulatory quality standards.
• Ensure standard operating procedures (SOPs) is closely adhered to across organizational departments.
• Ensure departments are operating in alignment with organization’s quality policies.
• To develop and manage the quality control and quality assurance procedures and ensure works are up to the specifications.
• Conduct internal QMS audit on documentation where required and reporting of quality-related issues
• Coordinate with classification societies' and owners' representatives for relevant inspections
• Facilitate continuous improvement of production quality by implementing corrective and preventative actions (CAPA) plans
• To Perform needed tests on site to ensure works are done according to the contract specifications.
• To prepare inspection reports
• Attend meetings and liaise with the client to ensure that quality requirement is being followed at all times.
• Maintain document record master list pertaining to equipment’s & monitor on the calibrations.
• Ensure documents and record-keeping are in compliance with quality procedures for internal and external audits
• Perform other activities as per instruction by Project Manager / Engineer.
• Excellent English communication abilities, including writing, speaking and active listening.
• Proficient in MS Office applications.
• Must be able to understand, read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Register, monitor & Closure of NCRs, Punch Lists in construction projects.
• Willing to work in a fast paced and challenging repair environment
• Ability to work in a team.
• Ability to work under pressure.
• Independent and self-motivated individual.
• Ensure quality documents related to the project are maintained regularly for final dossier compilation.

Qualifications:

• Min 10 years of work experience in a similar position in shipyard, ship building industry (Oil and Gas industry preferred).
• Bachelor’s / diploma in Engineering or related field.

Job location: Jalan Buroh (West area)

Shuttle bus will be provided from various MRT stations.

Job Summary

• Assist in Quality audits, certifications, and other quality management
• Responsible for Quality Documentation (QD) section.
• Main document controller for QA department.
• Handle change control management.
• Update training plan QA department and ensure the plan is followed
• Compile monthly Quality KPIs reports
• Perform quality review / trending for CAPA/ complaint/ change control etc.

Responsibilities

Quality Documentation practice (60%)

• To ensure QMS documents for QA department are updated and reviewed as per individual review date.
• To update and maintain QMS document masterlists / schedules.
• To Updated schedules / authorized personnel name lists / emergency contact list etc.
• Oversee other departmental document controllers to ensure they adhere to document control SOPs.
• To ensure regional QMS documents are adopted locally by respective process owner, when necessary.

Training Plan (20%)

• To maintain and update training plan for QA department.
• To maintain and update training record for QA department.
• To ensure QA team adhere to training plan.

Quality Documentation practice (10%)

• Compile monthly Quality Department related reports
• Assist in training management, to conduct training for QA SOPs / quality-related process such as GxP requirements and to verify warehouse conducted training as per training schedule. (Deviation report will be issued if found non-compliant).

Assisting in other QA-Related tasks (10%)

• Back up PIC of Quality Compliance in the absence of PIC.
• Assist in tasks assigned by management when required.

Functional Skills and Knowledge

• Knowledge in ISO 9001/13485 standards
• Knowledge in GxP requirements (x – storage, manufacturing, distribution)
• Strong data analysis skills, management and reporting skills
• Problem-solving skills

Education and Experience

• Bachelor's degree in quality or science
• Minimum 3 years of Experience in Quality Assurance or relevant fields.

Centre for Advanced Robotics Technology Innovation (CARTIN) is looking for a candidate to join them as a Research Associate.

Key Responsibilities:

• Develop models, algorithms, and methods for multi-robot-human collaboration.
• Write the research results into project reports (and publication manuscripts if applicable).
• Contribute to project reporting and use case demonstration.

Job Requirements:

• Master in Electrical Engineering, or Automation, or Computer Science and Engineering, or related disciplines from a prestigious university
• Have research and/or academic achievements in related areas
• Knowledge in at least one of the following topics: human-robot collaboration, multi-robot cooperation, control and optimization, robot control, robotics
• Good simulation and programming skills
• Good interpersonal skills
• Good English verbal communication and writing skills

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities

• Plan and carry out the new setup
• Provide guidance to the application user
• Provide application troubleshooting
• Log, escalate, and follow through with issues raised by users
• Support in the testing of new applications and enhancement patches
• Conduct training for users on the use of the application

Job Requirements

• NITEC/Diploma in IT or relevant discipline
• Possess good communication & interpersonal skills
• Patient, polite, friendly, and helpful personality
• Positive attitude, dynamic, resourceful, and independent
• Able to cope with a fast-paced environment
• Knowledge of Microsoft SQL will be an advantage
• Junior/entry-level are welcome. Training will be provided

Job Responsibilities

• Software design and optimization, focusing on coding and debugging
• To design, develop, and maintenance of Android and iPhone Apps
• Maintain existing mobile apps on IOS and Android platform
• Troubleshoot and debug to optimize performance
• Knowledge of Java, Swift, Kotlin, MSSQL, C#, and VB
• Develop application programming interfaces (APIs) to support mobile functionality
• Use and adapt existing web applications for apps
• Proficiency in Swift and Swift Storyboard is advantageous
• Troubleshoot and debug to optimize performance
• Design interfaces to improve user experience
• Ensure all developments are of high quality and comply with the required specifications
• Stay up-to-date with the technology trends, security and data protection, concepts, and best practices for coding mobile apps

Job Requirements

• Candidates must possess at least a Diploma/ Degree in Information Technology/ Computer Science/ Computer Engineering
• hands-on proficiency in iOS app and Android development
• Familiar with the Mobile Application Development life cycle
• Demonstrable portfolio of released applications on the App Store or the Android market
• Good interpersonal and communication skills in English
• Excellent project and time management skills
• Patient, polite, friendly, and helpful personality
• Creative and able to work independently and as a team in a stimulating multi-disciplinary environment emphasizing teamwork
• Able to cope with a fast-paced environment
• Experience in web application development is an added advantage