Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Responsibilities:

• Conduct regular vulnerability scans and assessments on networks, applications, and systems.

• Analyse scan results, prioritize vulnerabilities based on risk, and recommend remediation actions.

• Design, implement, and manage security measures for network infrastructures.

• Monitor network traffic for unusual or suspicious activity and respond to security incidents.

• Stay up to date with the latest security threats, vulnerabilities, and mitigation

techniques.

• Analyse potential threats and vulnerabilities to recommend proactive measures.

• Work closely with teams to ensure security best practices are integrated into

all systems and processes.

• Assist in the development of security policies and procedures.

• Prepare detailed reports on security incidents, vulnerabilities, and remediation efforts.

• Maintain documentation of security protocols and incident responses.

Requirements:

• Degree/Diploma in Information/Data/application security

• Proficiency in security assessment tools (e.g., Nessus, Qualys, Burp Suite, Metaspoilt) is mandatory.

• Strong understanding of network protocols, firewalls, VPNs , IDS/IPS, and

security best practices.

• Experience with incident response and security incident management.

• Familiarity with compliance frameworks (e.g., NIST, ISO 27001, PCI-DSS).

• Knowledge of scripting languages (Python, Bash, etc.) for automation tasks.

• Candidates must be able/well verse in Speaking, Writing, Reading in Mandarin and English

Roles & Responsibilities

Job Description:

Prepare and analyze cost comparison

Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

Responsible for measuring quantities and taking off

Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

Prepare tender and contract documents, including bills of quantities with the architect and/or the client.

Undertake cost analysis for repair and maintenance project work

Assist in establishing a client’s requirements and undertake feasibility studies

Perform risk, value management, and cost control

Identify, analyze and develop responses to commercial risks

Prepare and analyze costings for tenders

Allocate work to subcontractors

Provide advice on contractual claims

Analyze outcomes and write detailed progress reports

Value completed work and arranged payments

Maintain awareness of the different building contracts in current use

Understand the implications of health and safety regulations.

All other QS related job

Job Requirements:

Degree / Diploma in Constructions Building or its equivalent

Ability in contract negotiation, contract administration & variation orders

Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

Job Description:

• Manage the procurement activities of direct materials, including review and convert Purchasing. Requisition (PR) into Purchase Orders (PO); resolve invoice, or quality related discrepancies.
• Sending requirements to suppliers : Request for Quote (RFQ), Request for information (RFI) using digital tools.
• Purchase price analysis and price negotiations; Identification and realization of savings potentials,
• Close cooperation with the stake holders and suppliers.
• Supplier management including supplier set up, supplier evaluation and development.
• Optimization of existing supply chain processes and participation in project teams.
• Leverage existing procurement processes and compliance while seeking to identify best management practices. Using a continual improvement mindset to create efficient processes.

We are looking for:

• Degree in Industrial Engineering, Business Management, Economy or similar areas,
• +4 years professional experience in a similar position,
• Knowledge of Procurement / Supply Chain activities with a broad solid understanding of operational, activities across a range of businesses.
• Previous experience of working in Supply Chain Management
• Good knowledge of MS Office and SAP
• Fluent in English (written and spoken); Strong communication and negotiation skills;

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

Job Duties and Responsibilities:

• Integrate and commission a variety of instrumentation and control systems for commercial projects.
• Program and integrate control systems, design control panels and subpanels, and generate I/O lists.
• Perform engineering tasks, including PLC and SCADA software interface programming.
• Develop process functional designs, including control write-ups and control schematics.
• Create hardware and software design specifications, as well as other software/test documentation.
• Diagnose and resolve issues in electrical, instrumentation, and control systems.
• Manage multiple tasks effectively, work under pressure, and meet tight deadlines to ensure timely completion of commissioning activities.

Job Requirements:

• Proven experience in PLC control program design and implementation within industrial or marine automation, or process automation settings.
• Strong technical knowledge and hands-on programming skills with various PLC brands.
• Proficient in technical knowledge and programming of SCADA software.
• Resourceful and highly organized, with excellent time management and problem-solving skills.
• A collaborative team player who can also work independently in a fast-paced environment.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Duties and Responsibilities:

• Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

• Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

• Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

• Troubleshoot issues involving electrical/electronic control systems, PLC products.

• Read and understand manuals, schematics, and P&ID's.

• Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

• Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

• Monitor and manipulate site execution in line with sequence of works.

• Handle technical issues, drawings, reports, procedures and any other relevant documents.

• Develop engineering capabilities and work with sales team on project proposal and bidding.

• Selection of equipment, materials for instrumentation and controls.

• Execution of projects.

• Plan and carry out E&I maintenances

• Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

• Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

• Excellent verbal and written communication.

• Possess excellent interpersonal and communication skills.

• Responsible, Meticulous and able to work under pressure.

• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

• Experienced in PLC/SCADA systems.

• Fluency in English (verbal and written) is essential.

Job Description

• Review, track & monitor the main contractors’ programmes and/or CAG/CAAS direct contractors’ programmes to comply with CAG requirements.

• Review the main contractors’ baseline S-curve, cost loading, resources allocation, histograms and 4D BIM, highlighting areas of concern to SO/SO(Rep).

• Review and give detailed feedback on main contractors’ schedule submissions and recommend status of approval / non-approval to the SO/SO(Rep) in compliance with CAG requirements.

• Prepare monthly dashboard reports to CAG in relation to the progress of works and any issues that may negatively impact on the timely completion of the contract including presentation to stakeholders, if any.

• Review main contractors’ progress reports.

• Review main contractors’ updated programmes which reflects the actual progress of works and capture any change of work sequence.

• Keep record of important site information such as, equipment and manpower deployment, changes to any design/construction dates, delay events, etc.

• Review and assess trade productivities.

Job Requirements

• The Planner shall possess at least ten (10) years of relevant construction experience with at least 7 years of experience in development and/or review of project schedules for every phase of the construction project lifespan by using Primavera P6;

• The Planner shall possess a degree in Civil and Structural Engineering or relevant discipline;

• The Planner shall have experience in scheduling for projects of similar scale, complexity and nature of works;

• The Planner shall possess intermediate to advanced knowledge of Microsoft Project, Excel, Power Point and Word; in addition, the Planner shall also be proficient in Primavera P6;

• The Planner shall be able to work independently, a strong team player and to handle fast paced projects;

• The Planner shall have good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels and have good presentation skills.

Job Description

• Responsible for ensuring that both CAG Employers Information

• Requirements (EIR), LTA Exchange Information Requirements (LTA EIR) and Project BIM Execution Plan (BEP) are implemented on site.

• Responsible for ensuring the capability of Contractors & sub-contractor BIM team are within the EIR documents & to the BEP.

• Responsible for ensuring that all related infrastructure and facilities are

• coordinated in BIM Model before commencement of actual works on Site.

• Responsible for ensuring that all Shop Drawings/Construction drawings are coordinated & updated in BIM Models before commencement of actual works on Site.

Job Requirements

• Minimum 10 years of relevant work experience, highly proficient in the use of BIM software and in establishing required processes and procedures and framework for BIM in projects.

• Familiar with various aspects of engineering e.g. Civil, Structural, Architecture, Mechanical, Electrical.

• Possess a Degree in Engineering / Architecture or equivalent.

• Highly motivated and able to work independently, a strong team player and able to handle fast-paced projects.

• Possess good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels and have good presentation skills.

• Shall be continuously under employment under any Consultant/Contractor for a minimum of 5 years and have successfully

• Instituted a BIM Company Deployment Plan as well as implemented Project BIM Execution Plan for at least 2 projects.

• Completed a certification course in BIM Management.

Job Description

• To plan, manage, oversee and be responsible for all aspects of the health, safety and environmental matters for the Project.

• To advise and report to the Superintending Officer and ensure the Project complies with its statutory obligations, Changi East safety requirements, airport authority's safety requirements and aerodrome safety standards.

• To manage the team of ASMs to ensure all duties and responsibilities required of them are discharged professionally and competently. He shall carry out regular meetings with the team and address any issues relating to their personal and work matters.

Job Requirements

• Minimum 10 years of Workplace Safety and Health (WSH) experience in the construction industry, preferably 5 years with developer/main contractor.

• Minimum 5 years of WSH experience in deep excavation works.

• Minimum 3 years of experience in managing a team of site safety personnel.

• Possess Engineering, Workplace Safety & Health Disciplines, or related qualifications.

• Registered with MOM as a Workplace Safety and Health Officer (WSHO) and has been practising as WSHO for at least 5 years.

• Has obtained certificate in development of a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent.

• Has obtained certificate in DfS appreciation course.

• Good communication skills and a competent team leader

• Conversant with all procedures in Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

To be able to read and understand hydraulic schematic

To have hydraulic troubleshotting knowledge

To be able to work onsite independently

To work with a team of service engineer and technician

To know how to repair hydraulic cylinders, pump and hydraulic power unit

Simple design of hydraulic system is an advantage

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

• Perform measurement and calibration using a Coordinate Measuring Machine (CMM)
• Generate and issue final reports
• Liaise with client on technical issues when necessary
• Maintain draft report format/template
• Maintain good housekeeping at workstations/areas
• Assist in the development and extension of new calibration scope
• Increase calibration productivity and efficiency by adopting improved system and methods
• Constantly strive to deliver outstanding services
• Listen to and anticipate the client’s needs and pains to offer the most suitable solution
• Manage timely trouble shooting and assist customers as necessary
• Build and foster collaboration with internal teams involved in service delivery
• At all times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• Perform any other responsibilities assigned by senior management

Requirements:

• Diploma/Degree education in mechanical engineering or related engineering field
• 1~3-year experience in CMM measurement and equipment calibration.
• Technical knowledge and experience in related field
• Able to work independently and to coordinate several activities simultaneously
• Business and profit minded with related technical knowhow
• Competitive and profit-driven; re-invents competitive advantage.
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Works well under pressure, challenges status quo
• Applies judgment and acts according to the SGS standards of ethics and integrity

• Sell service and exceed targeted sales and expand market share.
• Develop & retain clients and negotiate contracts.
• Assist in business development & marketing.
• Meet targeted sales revenue
• Expand market share
• Draw prospect list and develop new clients
• Grow and retain key clients
• Develop new services/products and concepts for the assigned market segment.
• Translate business strategy into pragmatic action plans and execute
• Maintain awareness and understanding of all SGS services, ensuring that full range of SGS services are presented to new and existing clients to maximize sales opportunities
• Ensure timely creation of quotes and professional submission of all information as requested by clients, ensure follow-up
• Negotiate and secure contracts
• Manage pre and post contract commercial issues
• Support for collection of payment from clients
• Analyze market potential and develop competitive positioning and pricing strategies
• Track competitor activities
• Monitor market for the development of new technologies and trends.
• Source and coordinate with SGS affiliates and/or subcontractors for subcontract engagements
• Operate to the highest standards of ethics, in accordance with the SGS Code of Integrity
• Any other duties as assigned from time to time.

Requirements:

• Min Diploma in Science filed or equivalent
• Previous experience as lab analyst would be advantageous
• 3 years sales experience in chemical-related laboratory testing sales
• Technical knowledge of chemical related laboratory testing
• Able to work independently and multi-task
• Good business acumen and results orientated
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Acts quickly and decisively
• Works well under pressure, challenges status quo.
• Communicate effectively in English, both written and oral
• Team player and have service-oriented mindset

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

• Conduct laboratory tests and analysis in compliance with established laboratory standards, policies and processes, and record all findings accurately.
• Perform analysis at site laboratories or at field assignments.
• Prepare and standardize reagents and test solutions.
• Review, question and repeat results if suspicious results are encountered.
• Represent the Laboratory as witness at third party and refinery laboratory.
• Maintain cleanliness and safety of the laboratory, including apparatus, equipment and materials used.
• Assist in the practical training of new Analyst where assigned.
• Perform shift work and overtime when required.
• Perform any tasks as assigned by supervisor.
• Apply judgement and act according to SGS standards of ethics and integrity.

Requirements:

• Diploma in Science, Chemistry, Chemical Engineering or related fields.
  Minimum one year of relevant working experience in Oil, Gas & Chemical laboratory.
• Good knowledge of laboratory processes and safe handling of chemicals.
• Good knowledge and experience in handling Gas Chromatography and other scientific testing instruments.
• High attention to details, meticulous with good time management.
• Results and service-oriented.
• Team player with a positive working attitude.
• Able to multi-task and work independently within challenging timelines.

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

We are seeking a highly motivated and experienced Quality Control Snr. Executive to join our team. The ideal candidate will have a strong background in ISO and AS certifications, as well as a proven track record in quality control management. In this role, you will be responsible for ensuring that our products and processes meet the highest standards of quality, aligning with ISO and AS certifications. You will collaborate with cross-functional teams to drive continuous improvement, implement best practices, and maintain a culture of quality excellence.

DUTIES AND RESPONSIBILITIES

• Assist in developing, implementing, and maintaining quality management systems based on ISO and AS standards.
• Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.
• Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians
• Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.
• Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.
• Assist in the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.
• Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.
• Monitor and analyze quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.
• Stay up-to-date with the latest developments in ISO and AS certifications, as well as industry best practices, and incorporate them into the quality management system.
• Assist in the preparation of audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

REQUIREMENTS

Qualifications and experience:

• Bachelor's degree in a relevant field (Quality Management, Engineering, Manufacturing, etc.); advanced degree or certifications (e.g., Six Sigma, CQE) are a plus.
• Minimum of 3 years of experience in quality control, with a focus on ISO and AS certifications.
• Strong understanding of ISO 9001 and AS9120 Standards, with the ability to interpret and implement their requirements effectively.
• Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.
• Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.
• Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.
• Detail-oriented mindset with exceptional organizational and problem-solving abilities.
• Familiarity with quality management software and tools.
• Strong leadership skills and the ability to collaborate effectively across departments.
• For candidate with extensive experiences will be considered for Asst.Manager/ Managerial role.

Personal Qualities:

• Proactive, driven and resilient
• Able to work independently and as part of cross-cultural team
• Meticulous, accurate and attention to detail
• Professional and calm