Will be assisting Material Engineer on all activities. Should have Basic Knowledge of Metals & Non-Metals, Alloys, Able to differentiate / grade / mechanical products with atleast Five yearsof Experience

Job Description

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions

Qualification

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.
• Overall work experience of 1 to 3 years in a similar position.
• Basic knowledge & interpretation of gas chromatography, knowledge of densimeter and refractive index equipment preferred.
• Basic knowledge of chemistry.
• Basic Sensory evaluation capability / potential capability preferred.
• SAP knowledge will be an advantage

This role is responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution including but not limited to

• Responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution.
• Pick and place methods and logic
• Selection of sensors and actuators
• Integration of vision systems
• Tolerance and motion studies
• Working together with application team to design new applications
• Arm simulation for new applications and deployments
• Arm simulation for new applications and deployments
• Training of assistant engineers on arm programming and setup

Requirements:

• Degree in Electrical/Electronics/Mechanical Engineering
• Working knowledge and experience with Yaskawa / Motoman manipulators and the INFORM language
• Excellent knowledge on TM arm programming, setup, commissioning and debugging
• Expereince on applications which require frame shifting and moving frames, integrating and calibrating vision systems to manipulator systems, end of Arm Tooling design, calibration and maintenance

• Permanent position, Salary up to $10,000 with AWS + VB
• Working location: Jurong East MRT
• Business travel requirement: ~35% to Asia regions

Responsibilities

• Influencing and persuading senior site and sales heads to ensure compliance with site quality systems to the appropriate standards, thereby mitigating risks associated with non-compliance and poor quality.
• Maintain coordination with Group Quality to ensure a unified global approach to quality matters and provide consistent supporting documentation across different regions.
• Ensure quality performance by monitoring appropriate leading and lagging indicators on customer complaints, contributing to the best customer service while remaining competitive.
• Encounter complex problems involving a variety of important and relevant information, requiring recognition and resolution.
• Make frequent business decisions independently that impact different manufacturing sites and the overall business.
• Provide training and coaching to Sales and Sites on quality and customer-related needs

Requirements:

• Degree in Chemistry
• Minimum 10 years of experience in Quality.
• Preferably comes with consumer care background and proven experience overseeing the regions (Asia).
• In-depth understanding of the company’s products and market trends.
• Thorough knowledge of QA systems, GMPs, and regulatory requirements.
• Familiarity with guidelines such as ICH, FDA, EMA, MHRA.

Interested candidates please send your CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R1875181

EA: 21C0661

Reports To: Quality Assurance Manager

Primary Objective:

To perform Validation activity on supporting evidence/ information supplied on client records to enable the processing of the outcome payments by the finance team. Utilize pre-determined checklists and either approve claims as compliant submissions or reject back to operations with succinct detail of remedial action requirements to progress to claim. Overall responsibility for the accuracy and timely processing of submitted outcome events within the required performance deadlines. Conduct client records checks in line with pre - determined working papers and support the production of reports outlining current program health weighting and clear remedial action requirements or recommendations to changes/ implementation of controls. To act as first point of contact for the operational leads with regards to quality enquiries and support facilitation of internal and external audits.

Responsibilities:

• Perform validation activity on programme outcomes to determine if evidence supplied supports payment claim from our customer (government), issuing remedial action guidance, and monitoring corrective action completion when necessary.
• Audit client files to determine the level of compliance and overall programme health indicators and to produce initial audit findings report for presentation to the Quality Assurance Manager for cascade to the wider business.
• Robust working knowledge and interpretation of Government Minimum Standards to act as subject matter expert for issuing guidance and maintaining FAQ logs.
• Support in trend analysis and action plan creation to mitigate risk and suggest process improvement to enable compliant by design approach
• Report highlighted knowledge gaps in operational delivery areas that present a risk to the Quality Assurance Manager for review and action.
• Produce management reports linked to quality in line with business requirements and schedule.
• Support creation / amendment of quality guidance, manuals and other delivery resource tools for compliance in programme minimum standards and AKG set standards.
• To provide administrative support to the Quality Assurance Manager as and when required.

Person Specification

Key Skills/Experience

• Tertiary education with audit and compliance experience
• Proficient in the use of Microsoft packages and intermediate or Advance Excel (Essential)
• Experience in generating management reports for trend analysis and reporting purpose
• Experience dealing with government bodies will be preferred but not compulsory
• Strong project management skills and prioritize tasks
• Self-Motivated and able to work from own initiative with minimal supervision
• Strong eye for detail – able to identify anomalies
• Efficient working practices – speedy, accurate input
• Anticipates and identifies problems / weakness and propose solutions to improve the program
• Ability to provide guidance using varied channels including group delivery and live online delivery
• Demonstrates a willingness to help and support other members of staff within the team
• Flexible Attitude to work

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

• Location: International Business Park (IBP)
• Business travel requirement: ~35% to Asia regions
• Salary: $8,000 - $10,000 commensurate with experience

Role Overview

As a key member of the Group Quality Leadership team, the Regional Quality Manager supports manufacturing and non-manufacturing sites on quality matters across the Asia Pacific region.

Job Responsibilities

• Influence and persuade senior site and sales heads to ensure compliance with required quality standards and mitigate risks from non-compliance.
• Coordinate with Group Quality for a unified global quality approach and consistent documentation.
• Stay updated on new customer quality requirements, identify gaps in current practices, and help sites close these gaps through planning and best practices.
• Communicate complex quality information in a user-friendly way.
• Monitor quality performance using indicators and data analysis to improve customer service and competitiveness.
• Identify and solve complex quality problems, provide advice in critical situations, and handle product recalls.
• Make significant business decisions independently that impact multiple sites and overall business performance.
• Provide training and coaching on quality and customer-related needs.
• Represent the company on quality committees and regional trade associations.
• Support sales with quality discussions and meet with main or potential customers in the region.

Knowledge, Skills, and Abilities

• Degree in Chemistry
• Minimum 10 years of experience in Quality.
• Preferably comes with consumer care background and proven experience overseeing the regions (Asia).
• In-depth understanding of the company’s products and market trends.
• Thorough knowledge of QA systems, GMPs, and regulatory requirements.
• Familiarity with guidelines such as ICH, FDA, EMA, MHRA.
• Ability to plan multiple activities with competing priorities.
• Commercial insight to evaluate processes for commercial benefits.
• High level of interpersonal skills.

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

Responsibilities:

(1) Perform routine maintenance/inspection and testing of the below equipment's and systems:

• Fire shutter systems
• Pressurization fan
• Fire alarm bell
• Fire alarm system and CPU
• Smoke detector, Heat detectors
• Highly sensitive smoke detection system
• Sprinkler system, hose reel system, FM200 System, Inergent system, Pre-action sprinkler system, Dry riser system
• Sprinkler pump, jockey pump, hose reel pumps

(2) Troubleshooting the control panel

(3) Attend during system breakdown and Identifying the problem, conduct proper diagnostic procedure and troubleshoot the system

(4) Provide support during system upgradation and installation of new systems and equipment's

(5) Maintain all the records of the inspected systems/ equipment's and report incase of any abnormalities

(6) Must be a team worker who provide support and make sure the member of the team are working together effectively.

Requirements:

* Nitec in Electrical Engineering or it's equivalent

* Minimum 1 year related working experience

* Must be a team worker who provide support and make sure the members of the tean are working together

effectively.

Intersted candidates please send your latest resume to "[email protected]"

JOB SUMMARY

Carry out Quality Inspections, Prepare Quality Reports, Calibration of Monitoring and Measuring Equipment and ensuring Compliance to QHSE Policies and Procedures at all times.

RESPONSIBILITIES & DUTIES

• Ensure incoming and in-process inspections are carried out timely and quality inspection reports are filled up accordingly.
• Ensure timely communication about the defects detected during inspections to the Quality Engineer, QHSE Manager/ MR, Production Supervisor and Production Manager.
• Review quality inspection reports from external providers and perform verification of the results.
• Updating Quality Engineer and QHSE Manager/ MR on the inspection status and update in Navision.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Ensure that operations within his area of responsibilities are in accordance with the QHSE policy and objectives.
• Ensure that employees are aware of the impact of their activities on the environment.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure the QHSE requirements are effectively maintained and followed.
• Ensure responsiveness to inspection requests and technical support to the team.
• Ensure all plans are met.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• NTC / Nitec preferably in Quality or Mechanical Engineering discipline or equivalent.
• Preferably 1 years of relevant experience in a Quality Inspector role.
• NDT (MT and PT) Level 2 certificate
• Ability to use and read Monitoring and Measuring Equipment (Vernier, Micrometer, Gauges, CMM machine, etc)
• Interpret and read Engineering Drawings.
• Familiar with ISO and API requirements / standards is preferred.

Primary Responsibilities:

• Plan, design, review and prepare drawings, specifications and Tender Document.
• Authorities’ consultation and submission
• Manage technical, engineering and contractual matters.
• Resolve any technical difficulties & other issues that may arise.
• Design control systems, SCADA, DCS etc.
• Preparation of General Arrangement, control architecture and ICA equipment layout drawings.
• Preparation of Control Panels, LCS, instruments and analyser and cable etc specifications and datasheets.
• Prepare loop diagrams, hook up drawings, control schematics, cable schedule, bill of quantities etc.
• Design of CCTV system, fire alarm control system, Public Announcement System, security access systems etc.
• Review and evaluation of vendor submissions.
• Provide project cost estimates
• Coordination with other disciplines e.g. civil, structural, mechanical, building services and electrical designers.
• Attends meetings, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Provide engineering support during construction
• Provide engineering support during commissioning
• Design management and project management of proposals and projects where the scope is primarily ICA.

Preferred Qualifications

• Degree in Electrical or Electronics Engineering or any equivalent qualification.
• Candidate shall have minimum of 10 years experience related experience, preferably with consultancy experience.
• Past experience working on water or wastewater projects will be an advantage (municipal and industrial).
• Able to work independently in producing the project deliverables to meet project timeline
• Proficient in written and oral communication with good interpersonal skills.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Details:

• Location: Near Pioneer MRT
• Monday to Saturday 5.5 days work per week
• Monday to Friday 8am to 5pm and Saturday 8am to 12.15pm
• Oil and gas / Precision Engineering - Manufacturing

Job Description:

• Reject or return raw materials, component parts which failed to meet specifications or not properly labelled
• Red flag procedural non-compliance and quality issue to higher management
• Update and maintain records of quality check conducted
• Ensure Receiving, First Article, In-process and Final outgoing inspection conformed to quality aspect of engineering drawings
• Parts quality inspection must meet production schedules and time lines for delivery
• Measure product dimensions and ensure all quality aspects of the job met specifications as in engineering drawings
• Generates quality inspection reports per customer requirement
• Ensure parts identifications are properly labelled upon received, during production and completeness for delivery
• Maintain active calibration validity and integrity of all inspection equipment and gages

Job Requirements:

• GCE “N” or “O” level / NTC 2 or NTC 3 in Metal Work
• Minimum 1-year experience in quality control field
• Ability to use common measuring instruments like gauges, calipers, micrometers and profilometers
• Able to interpret technical drawings and engineering specification
• Good communication skill, basic computing skill and a team worker

1. Develop and implement QA/QC inspection and testing protocols in accordance with specifications and regulatory requirements, ensuring comprehensive coverage for major projects.

2. Lead and manage a team of experts to uphold the Quality Management System, policies, and standards, ensuring seamless execution of all quality-related activities to meet specified standards.

3. Create and execute preventive measures and corrective actions for non-conforming products, including training to enhance awareness of quality procedures and individual responsibilities in the QA/QC process.

4. Plan and coordinate site activities, resolving drawing discrepancies and details as necessary.

5. Collaborate with consultants and subcontractors for inspections and attend meetings as required.

6. Work independently and as an integral part of the Site Management team.

7. Support the Construction/Project Manager in overseeing daily construction and site coordination activities.

8. Document and report any non-conformances, conducting root cause analyses as needed.

9. Monitor and ensure implementation of corrective actions and continuous process improvements.

10. Conduct inspections of in-progress and completed work to ensure compliance with project specifications and approved construction drawings.

Job Description

• Assess the work hazards, submit risk assessments, mitigating measures and address all comments from the OIC prior to commencement of all works.
• Submit method statements where necessary to the OIC for approval before the commencement of inspection works.
• Plan, manage and co-ordinate all activities related to the work programmes as set forth in the Requirement Specifications.
• Prepare and submit all programmes, schedules (daily, monthly), monthly progress reports to the OIC.
• Check on the progress of works and ensure inspections are carried out according to schedule, unless prior approval has been sought to make adjustments.
• Ensure that all resources, equipment, etc are in good working condition at all times, and ensure timely and adequate covering for Inspectors who may be unable to perform their roles at any point in time
• Ensure that all inspection works carried out are in accordance with the Requirement Specifications and comply with any written law and statutory requirements in Singapore
• Ensure that the team of inspectors are equipped with the necessary equipment and that the inspectors are competent and well versed with the Authority’s standards and requirements.
• Ensure proper and adequate covering for Inspectors who may be unable to perform their roles at any point in time.
• Ensure that Inspectors’ daily inspection reports and other additional reports or findings are in order.
• Any other tasks as instructed by the OIC or Authority.

Job Requirements

• 5 years of relevant experience and knowledge in Project Management and Engineering Works to manage all the various types of works as set forth in the Requirement Specifications and to assume all the duties and responsibilities as set forth in the Contract
• A Degree in Civil Engineering recognized by the Professional Engineers (PE) Board or other qualifications acceptable by the Commissioner of Building Control for registration as Resident Engineer.
• A certificate in Pavement Construction and Maintenance which is awarded by the Building Authority (BCA), or equivalent and has completed a course on Code of Practice for Traffic Control at Work Zone.
• Able to communicate and write effectively in English; Minimally a Pass in English Language as first Language at GCE’ O level or equivalent.

Project duration : 1 Year +(1 Year Extension)

Work Shift : Day Shift & Night shift

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

Provide recommendations and timely updates on equipment degradation problems.

Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

Preparation of final inspection reports with all findings, abnormalities and recommendations.

Ensure quality of inspected items to meet project requirements and standards.

Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Read, understand project related ITP, procedures, specification requirements.

Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

Knowledge in welding inspection

Eligibility Criteria

Graduate Engineers with 3-6 years of relevant experience.

Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

Experience in Refinery and Oil & Gas must

Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

Work Independently and can work in Singapore and other countries.

Fluent Reading, Speaking and Writing in English.

Willing to commit 24 months contract/ project completion.

Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Develops, implements and maintains the Quality Management system according AS & ISO standards.
• Ensures all Corrective and Preventive actions are closed timely.
• Organizes and leads annual internal, external and customer audits.
• Organizes parts replacement for all customer’s complaint and feedback by resolving them in a timely manner.
• Ensures all measuring equipment are calibrated.
• Formulates, establishes a quality plan for outgoing inspection check on all parts.
• Reviews and to provide disposition for all items in the Quarantine area.
• Prepares Quality Performance metrics and reports to management.
• Drives supplier improvement plan/actions effectively.
• Conducts supplier process audits to drive process standardization, waste elimination, and drive improvements via statistic controls.

Job Requirements:

• Bachelor’s Degree.
• At least 1 years experiences in a similar manufacturing environment.
• Good knowledge in Quality Management System (e.g. ISO 9001).
• Strong and Competent Problem-Solving Skill and Statistical Process Control.
• Experience in managing the Customer Requirement and Complaint.
• Excellent communications skills, both verbal and written.
• Strong Microsoft Office skills (e.g. Excel, Word etc)

Quality Systems

• Supports overall maintenance of quality systems
• Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team
• Maintains the Mastercontrol and ISO document control system
• Maintains customer related documents such as Quality Agreement, PPAP
• Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

• Ensures effective implementation of all company quality policies
• Implements ISO and other recognized standards
• Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.
• Sets, communicates, and implements quality objectives in line with business goals
• Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.
• Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.
• Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

• Leads ISO quality standards implementation as Management Representative.
• Conducts and leads quality audits to specific quality standards.
• Leads customer related audits
• Conducts supplier audits
• Conducts internal audit investigations for product quality and process issues
• Responsible for ensuring timely resolution to audit findings

Training

• Provides training for all employees on basic quality and statistical concepts
• Provides training to appropriate personnel for updates and changes to quality policy
• Attends relevant external training sessions/courses and shares learning internally

General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Summary

The Quality Assurance Engineer (QAE) provides guidance, expertise, and services to ensure process and product quality of instrument products. The QAE supports compliance to the ISO 9001 quality system; internal auditing; material, process, and production controls; and other aspects of quality assurance to ensure compliance to standards, regulations, and guidelines. The QAE works cross-functionally with R&D to support new product introduction; with Manufacturing to create and modify procedures to ensure requirements are met; with Procurement to ensure incoming material meets specifications and suppliers meet quality standards; and within Quality to ensure overall compliance of products and processes.

Key Accountabilities

• Demonstrate knowledge of and adherence to site safety requirements.
• Execute goals and strategy for corporate and site level activities based upon company’s business objectives.
• Support supplier quality management activities, including audits and supplier performance evaluations.
• Investigate customer complaints and internal non-conformances, leading root cause analysis and implementing corrective and preventive actions.
• Participate in new product development projects, providing input on design for manufacturability and quality.
• Collaborate with various teams and leadership to develop and implement quality assurance strategies, policies, and procedures.
• Conduct regular inspections and tests on products, materials, equipment and processes to ensure compliance with quality standards and regulations.
• Analyze quality data and metrics to identify trends, root causes of issues, and opportunities for improvement.
• Develop and maintain quality documentation, including standard operating procedures, work instructions, and quality records.
• Lead or participate in cross-functional teams to address quality-related issues and drive continuous improvement initiatives.
• Maintain accurate records and reports related to quality control and compliance activities.
• Perform other duties necessary for the effective operation of the QMS.

Requirements

• Bachelor’s degree in engineering or related field
• 3 years of relevant working experience in a customer quality, process quality or engineering role, preferably in a manufacturing environment.
• Experience with root cause analysis, corrective actions, and quality improvement methodologies (e.g., Six Sigma, Lean).
• Ability to support Quality Management during audits and inspections.
• Excellent analytical and problem-solving skills, with the ability to interpret technical data and drawings.
• Knowledge of computer software like SAP, Microsoft Office applications (Word, Excel, PowerPoint).
• Ability to prioritize and work independently and proactively is critical for success.
• Previous experience in an ISO 9001, 13485 or GMP compliant manufacturing environment
• Previous experience with quality management system software for quality data tracking and document change management (e.g., TrackWise, MasterControl, Agile, QCBD, etc.) and internal auditor certification.

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

We are searching for a dynamic Technical Project Manager to lead our platform team in developing and delivering next-generation solutions. This role requires a strong background and deep understanding of web3 technologies, Hadoop and blockchain protocols.

Responsibilities

• Define and communicate a clear product vision aligned with the company's objectives and market trends.
• Provide technical guidance and expertise to cross-functional teams, ensuring successful execution of product initiatives
• Implement agile methodologies and best practices to streamline development processes and accelerate time-to-market
• Conduct market research and competitor analysis to identify opportunities for differentiation and innovation.

Requirements:

• Strong technical background in computer science or software engineering, with experience in managing complex systems.
• Deep understanding of web3 technologies, including blockchain protocols, decentralized applications (dApps), and smart contracts.
• Proven track record of working effectively with engineering teams, both internally and externally, to deliver high-quality products on time and within budget.
• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders and engage with the Web3 community.
• Involve in writing Map Reduce jobs and giving input to HDFS for further processing.
• Responsible for data movement from client library and relation database to HDFS using Sqoop.
• Writing Pig Latin scripts and HiveQL.
• Managing and deploying on Hbase on Pseudo distributed cluster
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana