Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Perform measurement and calibration using a Coordinate Measuring Machine (CMM)
• Generate and issue final reports
• Liaise with client on technical issues when necessary
• Maintain draft report format/template
• Maintain good housekeeping at workstations/areas
• Assist in the development and extension of new calibration scope
• Increase calibration productivity and efficiency by adopting improved system and methods
• Constantly strive to deliver outstanding services
• Listen to and anticipate the client’s needs and pains to offer the most suitable solution
• Manage timely trouble shooting and assist customers as necessary
• Build and foster collaboration with internal teams involved in service delivery
• At all times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• Perform any other responsibilities assigned by senior management

Requirements:

• Diploma/Degree education in mechanical engineering or related engineering field
• 1~3-year experience in CMM measurement and equipment calibration.
• Technical knowledge and experience in related field
• Able to work independently and to coordinate several activities simultaneously
• Business and profit minded with related technical knowhow
• Competitive and profit-driven; re-invents competitive advantage.
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Works well under pressure, challenges status quo
• Applies judgment and acts according to the SGS standards of ethics and integrity

• Conduct laboratory tests and analysis in compliance with established laboratory standards, policies and processes, and record all findings accurately.
• Perform analysis at site laboratories or at field assignments.
• Prepare and standardize reagents and test solutions.
• Review, question and repeat results if suspicious results are encountered.
• Represent the Laboratory as witness at third party and refinery laboratory.
• Maintain cleanliness and safety of the laboratory, including apparatus, equipment and materials used.
• Assist in the practical training of new Analyst where assigned.
• Perform shift work and overtime when required.
• Perform any tasks as assigned by supervisor.
• Apply judgement and act according to SGS standards of ethics and integrity.

Requirements:

• Diploma in Science, Chemistry, Chemical Engineering or related fields.
  Minimum one year of relevant working experience in Oil, Gas & Chemical laboratory.
• Good knowledge of laboratory processes and safe handling of chemicals.
• Good knowledge and experience in handling Gas Chromatography and other scientific testing instruments.
• High attention to details, meticulous with good time management.
• Results and service-oriented.
• Team player with a positive working attitude.
• Able to multi-task and work independently within challenging timelines.

• Sell service and exceed targeted sales and expand market share.
• Develop & retain clients and negotiate contracts.
• Assist in business development & marketing.
• Meet targeted sales revenue
• Expand market share
• Draw prospect list and develop new clients
• Grow and retain key clients
• Develop new services/products and concepts for the assigned market segment.
• Translate business strategy into pragmatic action plans and execute
• Maintain awareness and understanding of all SGS services, ensuring that full range of SGS services are presented to new and existing clients to maximize sales opportunities
• Ensure timely creation of quotes and professional submission of all information as requested by clients, ensure follow-up
• Negotiate and secure contracts
• Manage pre and post contract commercial issues
• Support for collection of payment from clients
• Analyze market potential and develop competitive positioning and pricing strategies
• Track competitor activities
• Monitor market for the development of new technologies and trends.
• Source and coordinate with SGS affiliates and/or subcontractors for subcontract engagements
• Operate to the highest standards of ethics, in accordance with the SGS Code of Integrity
• Any other duties as assigned from time to time.

Requirements:

• Min Diploma in Science filed or equivalent
• Previous experience as lab analyst would be advantageous
• 3 years sales experience in chemical-related laboratory testing sales
• Technical knowledge of chemical related laboratory testing
• Able to work independently and multi-task
• Good business acumen and results orientated
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Acts quickly and decisively
• Works well under pressure, challenges status quo.
• Communicate effectively in English, both written and oral
• Team player and have service-oriented mindset

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

Dezign Format is seeking an experienced QHSE Manager to join our dynamic team. In this role, you will be responsible for all aspects of quality, health, safety and environmental standards within the company. Key responsibilities include developing, implementing, and maintaining quality management systems, conducting supplier audits, and monitoring supplier performance to ensure compliance with our quality standards. You will work closely with production, procurement, and project management teams to implement and uphold quality systems, drive continuous improvement initiatives, and update the team on the latest quality policies and regulations.

Roles and Responsibilities:

• Oversee daily operations of the quality assurance programme and conduct regular internal and external quality control audits to ensure compliance with established standards and procedures
• Spearhead the development, implementation, and improvement of quality control policies, standards, and operational procedures, ensuring proper documentation of records and reports for submission to regulatory authorities
• Develop and maintain a system for monitoring and evaluating quality control data, and provide comprehensive reports to senior management
• Identify and investigate quality control issues, recommend solutions to improve the quality of services, processes, and implement risk mitigation strategies
• Evaluate and monitor supplier performance through regular audits, ensuring strict adherence to the company's quality standards
• Monitor the use of equipment to ensure safety and sustainably discard any that do not meet requirements
• Mentor and lead the QHSE team, fostering a culture of continuous improvement and quality excellence within the company
• Serve as the company’s representative in quality-related discussions with external stakeholders, including clients and regulatory bodies
• Manage feedback, complaints, and incident or accident investigations
• Liaise with ESG and other relevant government entities on grant support applications and claims
• Spearhead the sustainability efforts of the company, gather carbon emission data and work with other departments to co-develop our sustainability report.
• Attend to any other related QHSE matters as requested by management

Requirements:

• Bachelor’s Degree in Quality Control or relevant disciplines (Engineering, Manufacturing, etc.)
• Minimum of 5 years of professional experience in a Quality Control, Quality Assurance or QHSE role
• Strong knowledge of local and international quality control methodologies and best practices, including ISO management systems and relevant frameworks (i.e., ISO 45001, 14001, 20121, 9001, and bizSAFE standards)
• Excellent written and oral communication, leadership, supervision and problem-solving skills
• Strong attention to detail and a commitment to producing high-quality work
• Ability to multitask effectively, work independently and in teams
• Proficient in Microsoft Office Suite
• Experience on sustainability report and carbon emission reporting is a plus
• Accreditation of QHSE internal auditor certification will be advantageous

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Summary:

The Sales Administrator supports the sales team by managing administrative tasks, including order processing, client documentation, and maintaining accurate records. Key responsibilities include assisting with demand forecasting, preparing sales reports, coordinating with internal teams (logistics, inventory, China team), and facilitating communication with clients.

The role involves acknowledging customer orders, coordinating with Logistics for timely fulfilment, and supporting sales team activities, including preparing client proposals and quotations. Strong organizational, communication, and analytical skills are required, along with the ability to collaborate across departments to meet business objectives.

Key Responsibilities:

1. Sales Support & Operations

1. Maintain supplies of sales presentation materials, including PPT slides and brochures.
2. Support sales efforts during tenders and projects.
3. Assist in daily sales operations and customer service.
4. Assist in setting up new accounts and provide necessary documentation for approval.
5. Scan and file quotations, proposals, and contracts for new accounts while maintaining accurate records.
6. Update databases, ensuring client contact information is current.
7. Communicate with Logistics and Accounts regarding dispatch, delivery times, and invoice queries.
8. Support product registration processes in Singapore.
9. Perform any other ad-hoc administrative duties as assigned.

2. Sales Performance & Reporting

1. Track sales team activities and performance.
2. Prepare monthly sales reports, including market conditions and team performance analytics.
3. Analyze client activity reports and present insights to the Sales Team.
4. Maintain and update reports, tools, and techniques to address client needs.

3. Client Management & Documentation

1. Send acknowledgment emails for sales orders received from clients
2. Collaborate with the China team on product costing, MOQ, artwork, pricing analysis, and client quotations (RFPs, RFQs, contracts).
3. Coordinate with the China team on processing samples and gift sets for customers.
4. Follow up with clients on existing and pending quotations and contracts.
5. Document and maintain client account records and financial profiles, including credit terms and other relevant details
6. Ensure compliance with organizational protocols related to clients' financial constraints and payment terms.

4. Product and Order Management

1. Assist the Sales Team to get demand forecast from Customer and collaborate with Logistics and Inventory Management.
2. Escalate product feedback to Quality Control for investigation.

5. Cross-Team Coordination

• Collaborate with the China team on product costing, MOQ, artwork, pricing analysis, and client quotations (RFPs, RFQs, contracts).
• Coordinate with the China team on processing samples and gift sets for customers.
• Aid the Sales Team in demand forecasting and collaborate with Logistics and Inventory Management.

Internal Contacts:

• Teams in China (Shenzhen)
• Hong Kong HQ Team

External Contacts:

• Prospective and existing clients

Skills and Experience:

• Administrative experience in the hotel/hospitality industry, FMCG, or related sectors, with vendor or supplier experience and an understanding of sales operations and client servicing, is a plus. The role requires adaptability in a fast-paced environment and the ability to manage competing tasks and client needs effectively.
• Understanding of the travel/lifestyle market, particularly hotels and resorts.
• Ability to support the sales team in prospecting, development and closing new business opportunities.
• Experience working with the B2B model, including sales, client relationships, and account management

Competencies & Personality Traits:

· Customer-focused and professional with a positive, mature attitude.

· Strategic thinker who is results-driven and thrives in a collaborative team environment.

· Strong time management skills with the ability to meet deadlines and manage multiple tasks.

· Analytical mindset with the ability to interpret market trends and data for actionable insights.

· Self-starter who works independently and takes initiative to achieve goals.

· Excellent communication skills (both verbal and written) for managing stakeholder relationships.

· Highly organized with strong administrative and multitasking abilities.

· Culturally aware with a preference for proficiency in foreign languages, particularly Mandarin and Cantonese.

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support and maintain existing work flow
• Documentation Control
• Inspection of manufactured components
• Communicate with other Departments

Job Requirements:

• working experience
• good initiative and proactive
• Microsoft office

Training and Guidance will be provided.

We are in the Precision Engineering Industry.

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

To support project manager and sales manager in adminstrative work

To help coordinate jobs

To help do quotations to customer

To help do service report for project manager

To help to reply email

To help sales manager to follow up on order and payment

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.