Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Job Highlights

• Basic + Commission + Bonus!
• Great Medical Benefits and Staff Purchase
• Engaging and Positive Workplace Culture

Job Description

Responsibilities:

Customer Service:

• Provide exceptional customer service by addressing customer inquiries, concerns, and complaints via phone, email, or chat.
• Maintain a positive and professional attitude while assisting customers with their needs.
• Ensure timely and accurate resolution of customer issues to enhance customer satisfaction.
• Build and maintain strong customer relationships to drive customer loyalty.

Telemarketing:

• Conduct outbound calls to potential customers to promote products or services.
• Generate sales leads and schedule appointments for sales representatives.
• Deliver persuasive and compelling sales pitches to prospective customers.
• Follow up on leads and inquiries to convert them into sales opportunities.
• Achieve individual and team sales targets.

Administrative Support:

• Maintain accurate and up-to-date customer records and sales activities in the CRM system.
• Provide administrative support to the sales team, such as data entry and report generation.

Requirements:

• Proven experience in customer service and telemarketing roles.
• Excellent communication and interpersonal skills.
• Strong sales and negotiation abilities.
• Ability to handle customer inquiries and complaints with professionalism and empathy.
• Results-oriented mindset with a focus on achieving sales targets.
• Proficient in using CRM systems and telemarketing tools.
• Good organizational and time management skills.
• Ability to work well in a team and collaborate effectively.
• Resilience and ability to handle rejection.
• High school diploma or equivalent. Additional certifications or training in customer service or sales will be a plus.

• Develop and update automated test cases, test plans, and test framework to align with requirements and policy changes.
• Conduct a variety of tests, including manual, functional, performance, and exploratory tests, to support User Acceptance Testing (UAT).

Requirements:

• Degree in Computer Engineering or equivalent
• At least 3 years of experience of quality testing with hands-on automation.
• Proficient in CI/CD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Summary

The Regional Sales Director, Governance, Risk & Compliance is an individual-contributor solution specialist role in a team environment supporting our customers in APAC. The ideal candidate will have a strong background in the Internal Audit and Controls space. Governance, Risk & Compliance experience is highly preferred. Experience within Big 4 public accounting is a plus.

Successful candidates will build relationships and identify Workiva solutions and services that meet customer needs to drive customer acquisition within a specific territory. Sales growth is attained through new customer subscriptions, professional services, delivery and training.

What You’ll Do

• Actively prospects for sales opportunities while working strategically with Inside Sales, Solution Specialists and Partnerships to generate qualified opportunities
• Presents to Customers: Uses the facts found in the needs analysis phase to present a compelling demonstration of the Workiva platform and create a customer belief that they must have Workiva solutions
• Handles Objections: Skillfully probes for objections and removes obstacles or eliminates barriers to gain commitment; solves different client challenges, and can pull forward the best possible solution
• Closes Sales: Naturally leads the sales process to a close by demonstrating Workiva’s value proposition
• Reports Customer Contacts: Updates customer relationship management tools regularly and timely
• Forecasts Sales: Provides consistent and accurate forward-looking information though pipeline analysis
• Plans Sales Strategy: Plans and executes sales strategy with purposeful action to complete the sale
• Optimizes Internal Resources: Gathers internal support to pursue an account
• Prioritizes selling activities and follows through in a timely fashion
• Maintains a strong knowledge of Workiva solutions through a commitment to ongoing training

What You'll Need

Minimum Qualifications

• Typically requires a minimum of 4 years of related experience in governance and assurance with a Bachelor’s degree; or 2 years and a Master’s degree; or a PhD without experience

Preferred Qualifications

• Understanding of the Software as a Service (SaaS) business model
• Ability to demonstrate complex software applications
• Strong business acumen and and ability to understand complex business issues
• Executive presence; ability to communicate at the most senior level
• Ability to identify and understand the power of influencers versus buyers and how to navigate the nuances of each during the sales cycle.
• Ability to manage multiple complex sales cycles simultaneously
• Ability to negotiate pricing with a focus on retaining value
• Capability for achieving (and exceeding) sales quota targets

Where You’ll Work

Our values drive how we work and who we hire. You will see these values ingrained in how we support our customers, work with team members, build our products and in the work environment we’ve created.

• Customer Success: Always delight our customers.
• Trust: Rely on each other.
• Integrity: Do the right thing, every time.
• Collaboration: Share resources and work together.
• Innovation: Keep creating solutions and finding better ways.
• Inclusion: Support a diverse community where we all belong.
• Accountability: Be responsible for your success and failure.

We believe our people are our greatest asset, and our unique culture gives employees the opportunity to make an impact everyday. We give our employees the freedom and resources they need—backed by our culture of collaboration and diverse thought—to continue innovating and breaking new ground. We hire talented people with a wide range of skills and experiences who are eager to tackle some of today’s most challenging problems.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• To keep abreast of the current state-of-the-art motion control algorithms
• To develop a variety of trajectory tracking algorithms (path and speed profile)
• To account for vehicle dynamics subject to variable loading of towed trailers
• Software design and development

Required experience

• Ideally 1+ years of experience in control research domain.
• Bachelors in computer science, Robotics, or related fields
• Strong familiarity with control systems, robotics, autonomous vehicles
• Strong familiarity with trajectory optimization
• Experience with research in robotics or related fields involving realistic agent motion
• Experience with C++ in a Linux environment
• Flexible problem-solver

Bonus experience

• Experience with ROS or other similar middleware
• Experience with data structures, object-oriented programming
• Experience with real world robotics deployment
• Experience in data-analysis
• Experience in simulation

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Responsibilities:

· Responsible for assuring the implementation and compliance with the Quality Assurance System.

· Control and monitor all activities related to Quality Management System (QMS).

· Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents

· Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

· Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

· Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP

· Liaise the Technical Engineer for submission of material submittals to Consultant

· Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

· Diploma in C&S Engineering / Architecture or equivalent

· Minimum 2 years of QA/QC experience in construction industry

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Responsibilities:

• To prioritize and perform the various testing/analysis in timely manner, in order to support the business requirements.
• Analysis of bulk product, in-process, raw material or environmental samples according to Standard Operating Procedures and Test Methods.
• Documentation of results in accordance with current Good Manufacturing
• Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment.
• Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Assay trend analysis, document revision and update.
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Any other duties as assigned by your Supervisor/Manager.

Requirements:

• Min Diploma/ Degree in any science related field
• Min 2 years of experience, preferably in an GMP environment
• Prior experience with HPLC, GC
• Able to start immediate or on short notice

Interested candidates please send your updated resume to:

[email protected]

Attn: QC Lab Analyst (Biopharma Plant MNC/ Shift) #HKA

We regret to inform that only shortlisted candidates will be contacted

EA Personnel: Kayley Ng Yin Yi (R1762843)

Company EA Registration Number: Recruit Express Pte Ltd (99C4599)

Roles & Responsibilities:

• Responsible for incoming materials and final inspection
• Ensure that QA/QC meets external and internal requirements
• using measuring instruments such as micrometers, calipers, dial bore, gauge CMM, ect
• Training will be provided
• Any other ad hoc duties assigned

Qualifications Requirement:

• 1 – 2 years of experience in QM/QA/QC preferably
• Candidates should have strong in spoken & written communication skill
• Possess good analytical thinking and problem-solving skills
• Willing to work 5.5 days

Roles and Responsibilities

· Develop and review company policies.

· Advise management on the company’s compliance with laws and regulations.

· Assess company operations to determine compliance risk.

· Documents drafting, including letter or email.

· Support projects and co-ordinate Company activities as assigned.

· Maintain proper and timely filing system, both in shared folder and hardcopy.

· Liaise with Directors of the Group, and other department personnels on compliance related matters.

· Assist to carry out regular internal audits for ISO [9001:2015 / 14001:2015 / 45001: 2018] certifications.

· Provide regular updates for all ISO documents.

· Attend ISO/Fire Safety/Other Audits independently.

· Assist to prepare trademark registration/renewal related documents.

· Co-ordinate and conduct meetings, briefings, or trainings to staffs as and when needed.

· Other ad-hoc duties as assigned.

Requirements

· Bachelor’s degree in law, finance, business management, or a related field.

· Possess at least 3-5 years of relevant experience.

· Good knowledge of legal requirements and procedures.

· A team player with excellent interpersonal and communication skills, attention to details, organized, meticulous and independent.

· Advantageous for candidate who has relevant experience and or knowledge in ISO.

· Good written and spoken language skill.

· Proficient in MS Office, Excel, PowerPoint, and Words.

Working place : Penjuru Lane

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Purpose of role:

This role will focus on improving internal testing processes and be hands-on with both manual and automation software testing. The role will support several key web product initiatives and ensure high quality software release to our customers, both internal operations team and external customers.

Responsibilities:

• Identify testable events and develop the test cases / test scripts. Leverage the testing process and test tools to create re-useable test assets.
• Implement related testing missions, including but not limited to Test plans, Test environment, Test cases, Test reports, bugs tracking, and regression test, based on the Software Testing Life Cycle (STLC).
• Define repetitive jobs and turn them into scripting to automate the testing workflow.
• Collaborate with Development team to perform the root cause analysis of the test failures.
• Explore the latest testing tools to improve testing efficiency.

Qualifications:

• Degree in Computer Science, Computer Engineering, Information Systems Management, Information Technology, or related disciplines.
• At least 4 years of relevant experience is required.
• Familiar with Agile software development lifecycle.
• Experience in testing web applications (UI and API) and console applications.
• Has knowledge in JIRA/Confluence, MSSQL, Hands-on development, and testing process.
• Test Automation Certification and/or experience in automation testing.
• Familiar with at least one UI automation framework.
• Experience in testing techniques such as smoke testing, database testing, white and black box testing, regression testing, system integration testing and user acceptance testing.
• Knowledge of DevOps tools in a CI/CD environment such as Jenkins, SonarQube is a plus.
• Good logical and structural thinking
• Strong sense of responsibility and result-oriented
• Good sense for quality, teamwork, and innovation
• Able to work independently or with limited assistance.

Position Summary:

Primary responsibilities are to ensure security and accuracy of inventory control by overseeing movement to and from the stockroom and all inventory transactions. Accountable for accurate, detailed, current inventory for raw material, WIP and finished goods.

Position Responsibilities:

• Ensure accurate and timely transactions of inventory· transactions from the stock room to the shop floor (Oligos, Arrays, Reagents and Instruments) and laboratories, material scrap, issues to departments and production orders
• Ensure cycle counts are performed according to procedures. Coordinate counts with departments accountable for inventory. Verify clerical computations against physical count of stock and adjust errors or investigate and report reasons for discrepancies. Generate variance reports for review by Materials Management and Finance as required
• Coordinate internal issues and shipments with Planning and Shipping
• Troubleshoot and resolve data entry errors and discrepancies
• Coordinate inventory issues with all respective departments
• Generate and distribute all daily/weekly inventory reports (cycle count, scrap, inventory valuation, inventory turns etc.)
• Any other activities as assigned by supervisor

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Must have a thorough knowledge of inventory management, production control, planning engineering change control, and nonconformance
• Knowledge of Microsoft Excel and Outlook required. Example: vlookup function, if function, pivot tables and charts
• Familiar with cGMP’s, SOX regulatory
• Effective verbal and written communication
• Well organized and detail oriented

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a Bachelor’s degree and a minimum of 2 years of related experience; or an advanced degree without experience; or equivalent work experience
• Knowledge of ERP/MRP systems (SAP preferred), word processing software, and inventory control procedures, etc
• Basic knowledge in VBA macros preferred

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection Eligibility Criteria
• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Location: Tuas (Walking distance from Tuas Link MRT)
Working hours: Monday to Friday (8.00 am to 5.15 pm)
Salary: Up to $4K

Job Scope:

• Be responsible for daily operations of the online QC support of UM Plant.
• Promptly address customer feedback or complaint to prevent recurrence.
• Manage QC lab tech scheduling and plan work force utilization to ensure efficient use of resources
• Track and assist department in achieving KPIs
• Ensure that products are effectively inspected/tested, and that product/process quality data conformed with specifications
• Ensure continuous compliance to Good Manufacturing Procedures
• Monitor and analyze process / product outputs, identify systemic problem / opportunity areas, provide data to the divisional team(s), and work with team members to drive process improvement project towards zero-defect quality performance.
• Resolve process related to quality issues, ensure corrective action plans are initiated and monitored
• Manage efficiency and safety in the laboratory.
• Ensure timely review batch records and release of finished products upon completion of testing and inspection.
• Lead to review effectiveness of corrective & preventive actions (CAPA) system.
• Supervise QC laboratory operations.
• Coordinate with other departments and conduct investigations as an area expert for appropriate discrepancies.
• Assist in developing departmental strategic staffing plans and justifications for headcount and capital equipment requests.
• Promotes laboratory safety working culture. Review opportunity to achieve zero incident.
• Perform as SAP Superuser for Quality function.
• Manage QA System sustainability.
• Lead to attain food safety management system certification, ie. ISO22K.
• Lead to plan and organize regular audits to the production and quality operations for compliance as well as to co-ordinate and document corrective action programs
• Lead to review Change Management, Audit management and CAPA Management are effective.

Job Requirement:

• Min. Degree in Food Science or any relevant
• Experience in the food Manufacturing industry
• Min. 3-4 years of experience preferably in food manufacturing

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Senior Software Engineer - Automation Control [3770]

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500 + AWS + VB

Requirements:

• Degree/diploma in Electrical/Electronic engineering/Computer science or related discipline
• 2-3 years of experience in PC programming (e.g. Visual C#)
• Familiar with various motions system/automation devices (e.g. IAI, Yasakawa)
• Familiar with vision systems (e.g. Cognex)
• Preferable with PLC knowledge (e.g. Omron/Beckhoff )
• Able to travel overseas at short notice

Jobs Scope:

• Design and develop software/GUI for automated equipment based on specifications and requirements
• Write design documentation to communicate functions of the developed programs
• Maintain, review and improve legacy codes and features
• Liaise with customer on control requirement and commissioning of the software in customer site

WhatsApp: +65 82026403

Email: [email protected]

14C7279 The Supreme HR Advisory Pte Ltd

R21103770 Chu Jenn Anne

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Overview: -

• Monthly Basic Salary: Up to $3200 (Depending On Experience)
• Woodlands (Beverage industry)
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Implementation and updating of the plant’s Food Safety (ISO 22000), Quality (ISO 9001), HACCP, Organic, and Halal Management Systems certified by 3rd party certification bodies.
• Supporting operations (quality control/ troubleshooting) and ensure products released meet all necessary requirements
• Liaise with government agencies / certification bodies on new product registration and certification information
• Ensure compliance to CCP, OPRP and Quality Control Points
• Monitoring and maintenance of correction and corrective action rectification from suppliers, in house inspections and daily routine checks.
• Conduct periodical food safety and hygiene inspections and training where evidence of compliance is lacking

You will need: -

• Minimum 2 years of QA/QC experience and product development in F&B manufacturing
• Minimum req; Diploma in Food Technology, Food Science or equivalent

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

· Responsible for assuring the implementation and compliance with the Quality Assurance System.

· Control and monitor all activities related to Quality Management System (QMS).

· Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents

· Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

· Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

· Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP

· Liaise the Technical Engineer for submission of material submittals to Consultant

· Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

· Diploma in C&S Engineering / Architecture or equivalent

· Minimum 2 years of QA/QC experience in construction industry

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Industry : F&B (Central Kitchen + Outlets)

Office Location : Tai Seng

Work Days : 5 days (Mon to Fri)

Working Time: 9am to 6pm

Salary Package : up to $6k+

Responsibilities:

• Proposing improvement and solutions to QA-related issues
• Lead the QA team - e.g Oversee, guiding and coaching
• Implement and ensuring all quality and food safety control processes are in compliance to company’s standard, ISO and local statutory requirement
• Conduct in house food safety training
• Investigating and resolve customer complaints related to quality and food safety
• Drive process improvement program to ensure high standard of food safety and quality
• Perform QA audit at central kitchen and outlets, and prepare QA reports.
• To support in supplier management program (audit and ingredient approval)
• Manage external inspection and liaise with regulatory agencies

Requirements:

• Must be able to Communicate Mandarin (to liaise with staffs at outlet)
• Diploma in Food Science / Food Technology or related
• Minimum 5~6 years work experience in QAQC related field in food industry
• Good knowledge in GMP/HACCP/ GFSI / ISO 22000 and Food Safety is preferable
• Familiarity / experience in internal auditing and microbiological testing method will be added advantage

Staff Benefits (Full-Time Staff):
- CPF Contribution
- Bonus Payout
- Annual Increment
- Medical Benefit
- Dental Benefit
- Annual Leave
- Staff Discounts @ all Group Brands
- Birthday Voucher

Interested candidate may wish to Call / WhatsApp : 8829 8029

Lighthouse Recruitment Pte Ltd (19C9852)

Koh Junhao (Royston) | Reg No: R1987463

Responsibilities:

• Ensure requirements for AABB, FACT as well as MOH license guidelines are implemented and maintained
• Report performance of the quality activities minimally on a quarterly basis and management review annually.
• Responsible for interfacing with regulators and external quality auditors.
• Monitor and review quality indicators and quality related reports.
• Provide guidance to departments in the review and refinement of current practices and protocols/processes, as well as risk assessment.
• Lead / Facilitate other departments in the root cause analysis of non-conformances to put in place effective corrective actions.
• Facilitate proper process control relevant to services and products that affects safety, identity, purity and potency.
• Initiate process improvement practices and benchmarking to industry practices across departments to raise standards of operational excellence and service delivery
• Training and distribution of Quality practices within Company and regional teams when required.
• Act as company’s management representative in compliance assessments and coordinate with regulatory or accreditation bodies as and when required.
• Oversee the maintenance of document control centre and system for proper and updated records of quality documents.
• Assist and lead in root cause analysis, work process improvements and problem solving together with departments.
• Lead the monitoring of quality objectives/indicators across departments to ensure quality of products and services are maintained according to SOP and regulatory/accreditation requirements.
• Review processing records and other reports as required by applicable regulatory and/or accreditation standards.
• Drive yearly internal audits for audit readiness and interdepartmental coordination.
• Ensure departments are up to date with annual document reviews.
• Work with regional offices on quality matters.
• Ensure quality training for new and existing employees is performed and to ensure competencies of the quality department are up to date.
• Support with supplier/vendor qualifications with participating departments.
• Coordinate and review on a periodic basis, operational and quality risk assessment, including workplace safety.
• Review, perform and lead gap analysis of new/revised standards published by regulatory and accreditation bodies to ensure departmental SOPs are in compliance
• Setting up of Quality Management Practices and assist in risk assessment for new services or entities assigned

Requirements:

• Accreditation and certification standards; AABB (Association for the Advancement of Blood & Biotherapies)
• FACT (Foundation for the Accreditation of Cellular Therapy)
• GDP-MDS SS 620 (Good Distribution Practice for Medical Devices) and other standards when required for the CGL’s services/products

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Charmaine Tin Zi Jin

EA Personnel Reg No: R23113892

• Generate test plans and test reports for functional and/or performance testing.
• Reevaluate defects through retesting and analyze the outcomes.

Requirements:

• Diploma in IT or equivalent.
• At least 2 years of automation testing experience using Selenium.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Key Job Accountabilities:

· Liaison with customer reps on documentation procedures including certification and maintenance release.

· Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.

· Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.

· Carry out investigation into incidents, accidents,customer compliants and warranty claims.

· Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.

· Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.

· Carry out Airworthiness Directives review.

· Monitor and track contracted operators’ surveillance follow up action to closure.

· To consolidate the aircraft surveillance and investigation KPI on the program assigned.

· Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

Job duties:

• Perform aircraft inspection, defect rectification, aircraft system operation check and troubleshooting
• Inspecting accidents and make recommendations
• Review and make recommendation on procedures and policies

Job requirements:

• Holding FAA or equivalent A&P license, with at least 5 years of relevant experience in performing and certifying aircraft maintenance
• Good communication skills (written and verbal)
• Details oriented