Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: QC Technician
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $2,500 + Transportation Allowance + AWS + VB (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Report directly to the section engineer and/or designate
• Shall carry out all laboratory tests and measurements accurately in accordance with procedure and upkeep/maintain the instruments/facilities in good running conditions
• Shall prepare standards and reagents for analysis in accordance with procedure and ensure that all related documentation is maintained
• Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
• Shall handle ISO Documentation/Raw Data for QA Department
• Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
• Shall assist in training staff for QC Section-related activities when required
• Shall maintain and check inventory of all storage samples and ensure all relevant records are maintained
• Shall perform receiving of QA department purchase and ensure that received items and all related documents are correct at the point of receipt
• Shall assist in audit preparation
• Shall support the QA Section in its activities as and when required
• Shall be involved in near-miss identification and provide work improvement (QEHS) suggestions
• Shall maintain the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
• Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
• Shall perform any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

APPLY NOW!!!

• At least a Diploma in Chemical or science discipline
• Experience with analytical instruments like ICP-MS, AAS, etc.
• Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
• Proficient in Microsoft Office Tools

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65938 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Freight Forwarding/ Warehousing
• Position Title: Trade & Compliance Executive
• Working Location: Cecil Street
• Working Hours: 5 days (Mon to Fri, 9 am – 6 pm)
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Collaborate with cross-functional teams to enhance internal processes related to quotation speed, relevant shipping documents, inventory management (oversees WH), and supply chain planning in general.
• To assist in quotation matters.
• To liaise with partners on compliance matters.
• To ensure compliant coordination between pricing and operations team.
• To foster a culture of continuous learning and professional development within the team.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma holder.
• Critical Thinking & Problem-Solving skills.
• Ability to work independently and with initiative.
• MS Office skills.
• Candidates without experience are welcome to apply; training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65644 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Overview: -

• 5 Days (Monday to Friday), Office Hours
• East - Loyang
• Monthly Base Salary: $2700 - $3700 (Based on working experience)
• AWS (13th Month) + Variable Bonus

Your Responsibilities: -

• Maintain and update documents and records related to ISO 9001, ISO 14001, and ISO 13485 systems
• Establish and maintain proper documentation control and distribution
• Conduct internal and external audits
• Liaise with external auditors and certification bodies
• Generate monthly reports
• Review and update Quality Management System procedures
• Ensure system compliance
• Manage internal and external corrective action reports
• Plan and conduct periodic system audits
• Maintain and regularly review calibration and preventive maintenance for instruments and equipment
• Direct and head internal audit programs and recommend improvements for internal audit policies and procedures

Requirements: -

• Minimum 2 years of working experience in QMS and ISO 9001 audit, preferably in manufacturing industries
• Good knowledge of ISO 9001, ISO 14001, and ISO 13485 quality system
• Knowledge in preparing FMEA and Control Plans

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

The Department and Position

The department is responsible for development and maintenance of Capital Market applications used by worldwide users covering Market Risk, Front Office and Back Office domaine. The applications are in-house developments with a mix of Microsoft and open source technologies.

Recent years have seen unprecedented evolution to the technical infrastructure available to answer still more challenging regulation. The open position is to join one major investment project to answer to FRTB regulation. To be ready to tackle the regulatory requirement, the Market Risk Information System platform is being redesign to be global and adaptable enabling automated reporting and real-time processing and monitoring. The MArket riSk dAta Intelligence project will transform the Market Risk application landscape as it was known to bring it to the next level.

Main Responsibilities

Team management

• Ensure operational efficiency of her teams in their activities
• Optimize the sourcing composition (role, skills, seniority) to perform/deliver the activities under his/her responsibilities

QA Strategy and solution

• Build QA strategy through the SDLC enhancing the global maturity level of QA process
• Build QA strategy based on the business process
• Developing QA core building blocks and framework to efficiently onboard new QA activities

As Test Automation Engineer

• Ability to build automated test solution from the beginning using cucumber, selenium or Cypress
• Coordination with application support (BA and developers) and other tester colleagues on creating the automation test suite.
• Preparing good documentation of each automated test process.

As Integration Tester

• Under the supervision of team head, the candidate should be able to handle the different integration test phases (planning, test functional coverage and adequacy with functional content) and to manage regression test, integration test on functional test campaign
• Maintain up to date test libraries (test cases)
• Handle application testing (manually and automated)
• Prepare regular reports on test results

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Qualifications and Profile

Mandatory

• Knowledge in Cypress, Selenium
• Knowledge on Cucumber/Fitness test definition
• Working experience in BDD automation framework
• Build tool - Maven/sbt/ant, UML, Restful web services, Jenkins/Team City, Source management – SVN/GIT, TDD using Junit, Jira/Xray.

Good to have

• Knowledge of Big Data environment (experience with HortonWorks distribution is a plus)
• Experience in Java, C#, Python programming
• Basic understanding of finance and investment banking especially Market Risk.

Other Professional Skills and Mind-set

• Excellent written and verbal communication skills for both team mates and management
• Strong analytical and problem solving skills
• Proficient software development life cycle
• Appetite to follow technology trend and participate to communities
• Passion for sharing expertise and grow team members’s skills
• Interest in mentoring and guiding junior team members on the path of high quality deliverables.

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Quality Management & Product Development Executive
• Working Location: Senoko South
• Working Hours: 5 days, Monday – Friday, 9 am – 6:10 pm
• Salary: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Implement, manage and conduct periodically internal audit according to Food Safety (ISO 22000), Quality (ISO 9001), HACCP, Organic, and Halal Management Systems, ensuring adherence to all certification requirements.
• Support daily operations, troubleshoot non-conformances, and ensure all products meet statutory and regulatory requirements.
• Utilize 7 QC tools for effective problem-solving, identifying root causes of non-conformities from various sources including supplier issues and customer complaints.
• Oversee compliance to CCP, OPRP, and Quality Control Points, managing the non-conformity process from product hold to final stock disposition.
• Coordinate with government agencies/certification bodies for product registration and plant certification updates.
• Conduct trial runs for new products, packaging, and equipment, ensuring validation of test protocols.
• Maintain product formulations and specifications, including nutritional information and shelf life assessments.
• Drive cross-functional collaboration to resolve quality and food safety issues, contributing to system and process improvements for cost optimization and compliance.
• As a Master Document Controller, formalize documents for Food Safety and Quality document and records as per documented information procedure, maintain record keeping.
• Provide training (GMP Hygiene, HACCP and Food Safety) to Operations and Production staff.
• Conduct incoming raw material checks, in-process QC checks and finished product microbiological testing, review QA/QC reports for accuracy and compliance.
• Any ad hoc tasks assigned by superior.

APPLY NOW!!!

• Degree in Food Technology, Food Science, or a related field.
• Minimum of 3 years of experience in QA/QC within the food industry.
• Knowledge of ISO Quality and Food Safety standards, including QMS 9001, FSMS 22000, HACCP,
• 5S, GMP, and other PRPs.
• A resilient team player, quality-focused, and action-oriented.
• Experience with Statistical Process Control, visual board management, and waste elimination is advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: QA Engineer
• Working Location: Defu Lane
• Working Hours: 5.5 days, Mon – Fri (8 am – 5 pm), Sat (8 am – 12 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Be involved in supporting Internal and External Audit.
• Inspect Mechanical parts, detect welding and mechanical appearance defects.
• Use measuring equipment such as Trimos, Profile projector, Hexagonal Arm. Height gauges, Vernier calipers, etc.
• Read and interpret all drawing symbols and welding symbols.
• Liaise with external customers and internal teams.
• Provide technical advice and the best method for improving production work.
• Support Acceptance Test Plan / Process Management Plan and conduct training.
• Perform FA, Incoming, In-process and Outgoing inspection to meet the delivery schedule.
• Ensure all measuring equipment is calibrated.
• Ensure maintenance record and Production in-process record is updated on time.
• Ensure the implementation of corrective actions/preventive action as a result of weekly Source inspection by customers.
• Compiling Outgoing Inspection reports to support documents in the customer portal, Microsoft Office and Outlook.
• Assist with Document Control - To ensure all drawings are latest and filed in a proper manner.
• Assists/performs other non-routine duties as assigned by QA Manager

APPLY NOW!!!

• Must possess a minimum of a Diploma in mechanical engineering or equivalent.
• Min. 2 years relevant experience in QA.
• Experience in Machining, Metal stamping, fabrication and related secondary processes (such as welding, plating, and powder coating) industry will be preferred.
• Good knowledge of auditing skills for ISO9001 and Qualified Internal Auditor experience.
• Good problem-solving skills and analytical skills i.e. good skills in 5S, 8D methodology, 5-why analysis
• Must be able to read and interpret technical drawings.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65696 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Chemical Distributor
• Position Title: QA cum Marketing Assistant
• Working Location: West – Tuas
• Working Hours: 5 days (Monday to Friday: 8 am-5.30 pm)
• Salary Package: Up to SGD 2200 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in monitoring the implementation and continuous improvement of ISO Certification and Halal standards for all Company Group sites.
• Assist in developing SOPs, WIs & ISO-related documentation.
• To be involved in investigating customer complaints and non-conformance issues, providing effective corrective and preventive actions.
• To be involved in Internal and External Audits.
• To be involved in planning and conducting in-house training for staff.
• To consolidate data for reporting on quality/operation/sustainability data for internal meetings and Group Reporting for all Company Group sites.
• To be involved in marketing strategies as assigned by Management.
• To be involved as a committee member in any company events or CSR activities.
• Analyze, develop and execute marketing strategies on e-commerce platforms to transact the products with customers, and manage company websites.

APPLY NOW!!!

• Min Diploma in Chemical/ Technology/ Marketing or any related discipline
• Additional skillset in Marketing will be an advantage
• Training provided to inexperienced candidates

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66071 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / Automation Engineer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.00 pm)
• Salary Package: Up to $4,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project-related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or overseas
• Project presentation & documentation
• To work with third-party engagement wherever necessary for project-related matters

APPLY NOW!!!

• Diploma / Degree
• Min 5 years of relevant experience
• Proficient in PLC programming is compulsory

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65637 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Overview
The Quality Specialist is responsible to carry out and adopt the global Quality Plan according to the specific needs defined by the scope of the assignment, to assist the assigned business line staff in improving compliance with relevant International Conference on Harmonization (ICH), Good Clinical Practice (GCP), Standard Operating Procedures (SOPs), Key Performance Indicators (KPIs), applicable regulatory requirements, and guidelines. Contribute to the development and be responsible for the implementation of specific quality improvement initiatives as agreed with the management and the relevant Head(s) of assigned business lines. Provide advice and support to relevant key stakeholders with regards to quality control, risk assessment, risk management, and corrective/preventive actions.

Essential Functions

• Adopt and implement the global Quality Management Plan within the scope of the assignment; this will include: Planning and executing the Quality Management activities. Risk identification and assessment through data review and quality control processes. Providing support in risk mitigation, in planning corrective/preventive actions, and guidance for improvement. Supporting the assigned business line management and staff to enhance effectiveness.;
• Cooperate closely with the relevant business and other stakeholders, support maintaining focus on quality in project delivery.
• Contribute to the development and implementation of a Delivery Unit/Sponsor specific Quality Management plan and Risk Management Program, monitor the implementation and delivery.
• Provide advice and support to teams within the assigned business line and other key stakeholders on all aspects of Good Clinical Practice (GCP) compliance.
• Work in close cooperation with teams to manage non-compliance, quality issues, assist in planning corrective/preventive actions, as applicable according to SOPs.;
• Inform the assigned business line and Quality Assurance of quality issues according to SOPs.
• Work closely with Quality Assurance and assigned business staff in case of suspected misconduct, as required by the applicable SOPs.
• May provide assistance during audits and regulatory inspections to the teams to the extent agreed, as required by the applicable SOPs.
• Prepare periodic reports to stakeholders on quality related matters, risk assessments and specific quality improvement initiatives.
• Upon agreement the line manager: Perform any other reasonable tasks as required by the role.;

Qualifications

• Bachelor's Degree in Life Sciences or related field
• 3 - 5 years of prior relevant experience.
• Sound working knowledge of medical terminology, IQVIA standard operating procedures (SOPs), International Conference on Harmonization (ICH), Good Clinical Practice (GCP), applicable regulatory requirements, quality management processes.
• Knowledge of National and International Regulations and Drug Development processes.
• Knowledge Pharmaceutical industry operations.
• Good organizational, interpersonal and communication skills. Good judgement and decision-making skills.
• Strong influencing and negotiation skills.
• Strong computer skills including Microsoft Office applications.
• Excellent problem solving skills.
• Ability to establish and maintain effective working relationships with co-workers, managers and clients/customers.

RESPONSIBILITIES:

• Perform dimensional Inspection on raw and finish machine parts
• Perform hardness, in-process & receiving inspection
• Prepare the dimensional, hardness and receiving inspection reports as per customer requirements
• Ensure all measuring, monitoring and testing equipment are in working condition and within calibration period.
• Maintain records (Inspection Reports, Calibration Certificate, NCR log),
• Perform gauge setting
• Raise NCR for non-conformance products

REQUIREMENTS:

• Minimum 1 year of relevant experience in dimension/hardness inspection
• Basic knowledge of measuring instruments
• Able to interpret customer BOM, Quality Plan and drawing requirements
• Able to work independently as well as in a team.
• Exposure to Oil and Gas industry will be an added advantage

Company: Food, Trading Company

Location: West

Position: Traffic Controller (Job ID: 18878)

Job Description:

1. Ensure all deliveries routings are plan on time and accurate.
2. Perform quality & quantity check for delivery.
3. Booking lorry parking bay at shopping malls.
4. Perform return, reject check from the respective driver.
5. Arrange truck for inspection & services.
6. Inspect all trucks cleanliness & in good conditions.
7. Ensure all warehouse area and equipments are secure, clean, tidy and maintained.
8. Familiar with Singapore street directory.
9. Backup drivers for delivery if needed.
10. Standby duties for weekends & public holidays.
11. Perform delivery operations to achieve desired KPI (goods must be delivered to customers on time etc) set by the management.
12. Support ESH (environment, safety, health) sub-committee for any safety/risk related issues.
13. Perform other assignments as required.

Job Requirements:

1. Able to work in warehouse environment.
2. Operate MHE equipment such as forklift, reachtruck, pallet jack, trolley.
3. Have class 3 & forklift license.
4. Minimum ITE/O Level/Diploma preferably with 1-2 years of experience.
5. Familiar with the roads of Singapore.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Lee Xin Hui

EA Registration No: R22108046
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
EA License No:90C4069

Key Job Accountabilities:

· Liaison with customer reps on documentation procedures including certification and maintenance release.

· Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.

· Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.

· Carry out investigation into incidents, accidents,customer compliants and warranty claims.

· Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.

· Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.

· Carry out Airworthiness Directives review.

· Monitor and track contracted operators’ surveillance follow up action to closure.

· To consolidate the aircraft surveillance and investigation KPI on the program assigned.

· Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

A world-renowned Media and Tech company is looking to hire a Compliance Professional to be part of their global project focusing on APAC regulatory mapping. This role sits within the Legal and Compliance division and will be on a 6-month contract.

*only successful candidates will be notified

Responsibilities

• Lead and plan the regulatory mapping exercise for the licensed entities
• Map license entity regulatory obligations to the respective internal policies, procedures, risks & controls
• Work in close collaboration with the various stakeholders (i.e., compliance officers, risk managers, legal)
• Present to management team re the above process
• Provide support to the overall regulatory mapping maintenance framework by monitoring, performing gap analysis, and driving changes where necessary

Requirements

• At least 5 years of experience in one of the following domains - i.e., Legal, Compliance, Risk Management
• Background in a financial institution, regulator, or consulting (risk/compliance)
• Experience in regulatory mapping and/or compliance risk management is a must

• Working days: Mon-Fri (Office Hours)
• Location: Ang Mo Kio
• Benefits: AWS + VB

This position will need to assist with other administrative functions as needed. This position will foster collaboration with departments and individuals on an ongoing basis to ensure an efficient operation and to promote teamwork and partnership.

General Import / Export Processing Management

• Process machine and parts orders from our customers

• Handle logistics for both SMT and FA products

• Warehouse administration of stock for both SMT and FA products

• Assist with the logistics needs of Company.

• Operate with sales management system A1-stream.

• Assist with exhibitions.

• Export control of machines and parts

• Support financial information from A1 stream as required

• Good communication with customers, vendors, colleague and business related.

• Assist human resource related and general affairs.

• Any other duties assigned by superior or by Company

Requirements

• Education and Qualifications: Diploma from a recognised tertiary institution or equivalent

• Practical Experience: Min. 2-4 years of relevant working experience

• Professional Business Skills: Good knowledge on incoterms, taxation, import/export documents, trade compliance and inventory system.

• Experience in trading industry preferred

• Experience in LC preferred

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to ref29"at"trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lai Jun Leong (Cedric)

EA Personnel Reg No: R21102891

Responsibilities

• To champion and liaise with production personnel on the investigation of root cause(s) of non-conformance and procedural failures
• Writing Quality Control plans & Inspection Test Plan (ITP) as per contractual requirements, API and licensors’ requirements
• To prepare, review & approve Quality Documentations such as drawings, first piece, in-process & final inspection reports prior to product release to customers
• To conduct audit, process inspection on sub-contract suppliers and maintenance of Approved Vendor List (AVL)
• In addition to these duties/responsibilities employee is required to carry out all additional duties as & when directed & required by QHSE manager

Requirements

• Min Degree in Engineering or equivalent
• Min 5 years related experience within production environment (desirable)
• Relevant Industrial Quality Training Certification

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

My client, a global insurer, is looking for a Manager within the Regulatory Advisory department. Our client champions a positive impact through competitive benefits, and flexible work policies, while also offering opportunities for professional development and leadership growth.

Responsibilities:

• Spearhead the planning and execution of the company’s compliance matrix alongside senior management
• Minimally conduct work reviews e.g. corporate cover pages, policy illustrations, product summary and agency documents etc.
• Provide guidance and mentorship to juniors
• Undertake any other projects or duties as directed

Requirements:

• Min. 6 – 8 years’ experience in regulatory compliance
• Exposure to the insurance industry, strong knowledge of insurance law
• Experienced in executing compliance matrix in an insurer or financial services firm
• Possess a collaborative team player mindset

Don't miss out on this exciting opportunity to be a part of a dynamic team. Apply directly or reach out to Jeanie Ng via email to [email protected] or dial +65 6351 6993 to be considered immediately.

Monday-Friday 8.30am-5.30pm

Location: East

Responsibilities:

• To work with all internal departments & suppliers to create a friendly & ensure quality awareness environment so as to achieve zero defect products

• To lead & work with MRB team on the OSV activities so as to meet supplier's requests before any RMA / RTV process

• To understand customer manufacturing quality requirements & align with the business agreement so as to work effectively with suppliers on the line rejection

• Work closely with suppliers to expedite on-the-line defective returns, and follow-up on the disposition & FA report so as to work back with the internal relevant departments. Eg : SCM, Quality, Process and etc.

• Maintain zero defective quality on hand & aging period

• Support parts localization and work closely with factory RD & engineering team

• Compliance with RBA

Requirements:-

• Degree / Diploma in quality/engineering

• Ability to work with the customer, HQ / factory, Peers / Subordinate, and Superiors

• SAP knowledge

• Able to multi-task & work under pressure

• Able to handle customer complaints and work well with internal & external departments to resolve the quality issues

• Able to provide constructive solutions/advice to the team

• Participate in con-call outside office hours if required

Compliance with RBA standards

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Job Description

• Industry/ Organization Type: Manufacturing - Motion Control / MNC
• Position Title: Sales Engineer
• Working Location: Woodlands
• Working Hours: 5 days, Mon – Fri (8:30 am – 5:30 pm)
• Salary: Basic Salary + Transport + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Establish sales strategy and action plans according to corporate objectives.
• Prepare technical presentations to effectively communicate our company's products to customers.
• Engage with customers and engineers to discuss technical requirements and find suitable solutions.
• Generate sales leads, follow up with customers after initial contact, secure orders, negotiate prices, and complete sales transactions.
• Identify new business opportunities in the market, as well as within our existing portfolio.
• Maintain an extensive knowledge of our company's technical products.
• Gather information about competitors, market trends and customers’ movement from market resources.

APPLY NOW!!!

• Degree/Diploma in Mechanical/Electronic Engineering/Automation Engineering
• 1-2 years of experience in motion control systems is preferable
• Good understanding of control system is advantageous
• Sales and customer-driven with strong presentation skills
• Willing to travel as and when required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65863 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: QA Technician
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $2800 + AWS + VB + OT
• Duration: Permanent

Key Responsibilities

• Perform in-process, incoming and final inspection (visual and dimensional)
• Perform final verification check of completed jobs (inclusive of documentation)
• Maintenance of CMM and Inspection Room
• Maintenance of measuring instrument (inclusive of monitoring of signing out/signing in)
• Monitoring of calibration schedule of measuring instruments
• Participate in continuous improvement projects

APPLY NOW!!!

• Minimum NITEC in Mechanical or Precision Engineering
• At least 2 years of relevant experience in Quality function in a manufacturing environment.
• Use of CMM and other measuring instruments
• Essential to have dimensional inspection and usage of CMM experience.
• Interpretation of mechanical/technical drawings
• Knowledge of Geometric Dimensioning & Tolerances (GD & T)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65849 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

We are looking for Manual Testers for a Singapore based project. This is a permanent role with a global IT service leader.

• Strong experience Application testing in either or all of package, bespoke, COTS applications
• Strong experience in STLC including test scripting, test data and test execution
• Good experience in defect management tools like JIRA
• Good to have experience in test automation and SQL
• Experienced in working in Waterfall and agile methodology
• Experienced in test artefacts and reporting
• Experience in integration and regression testing
• Billing knowledge preferable
• Good experience in co-ordination in multi-vendor environment
• Experienced in stake holder and client management
• Good Communication Skills

About Us

Zone IT Solutions is Australia based Recruitment Company. We specialize in Digital, ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. Our delivery Offices are in Melbourne, Sydney and India. If you are looking for new opportunities your profile at [email protected] or contact us at 0434189909

Also follow our LinkedIn page for new job opportunities and more.

Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities

The QA Lead manages processes and personnel to conduct quality assurance testing. The QA Lead develops effective and efficient methods throughout the QA process, and collaborates with various teams to ensure a high-quality product.

Responsibilities include:

• To develop, establish, and enforce quality assurance standards and measures for the course of software development lifecycles
• Works with the end users, Business Analysts (BAs), Designers and Development Team to define/iterate the test coverage plan to ensure the test scenarios and test cases are scalable and sufficient
• Provide testing effort estimation for sprint features.
• Conduct system integration tests with external systems and generate test reports by applying proven analytical / problem-solving skills
• Development and maintain requirement traceability matrix
• Works with end users to ensure complete and thorough execution of UAT
• Coordinates with Development Team to ensure bugs are resolved timely and identifies bug root cause
• Analyses bugs trend and fine tune QA processes to improve overall quality of the product
• Develops and fine tunes QA processes and working agreement with stakeholders through regular retrospectives
• Share the findings/improvements with the team and end users
• Works with Delivery Team to plan, schedule and execute regression for every product release
• Works with end users to prepare acceptance documentation for project sign off.
• In line management with QA Engineers

Requirements:

• Diploma/Bachelor’s degree in relevant disciplines (preferably in Architectural, Civil/Structural or Mechanical Engineering) with minimum 8-9 years of working experience
• Advantage for applicants with BIM (Building Information Modelling / Management) experience and/or Certifications such as Certified Software Testing Professionalor Certified Software Quality Analyst
• Experience in conventional test
• Good technical document writing skills in creating test cases, test scenarios and test steps

Duties and Responsibilities :

• Assist Senior Manager of Quality & Compliance to oversee the ISO Quality Management System held by the company.

• Work with internal stakeholders from Air Freight, Ocean Freight, Logistics, Courier, Cross Border Trucking Departments in achieving and meeting the set quality standards and procedures.

• Conduct training to stakeholders on topics related to quality standards and procedures.

• Work with internal stakeholders to understand and to meet the needs of customers.

• Gather quality objectives achievement metrics by internal stakeholders.

• Gather quality objectives achievement metrics by key suppliers.

• Work with internal stakeholders to gather customer satisfaction metrics.

• Monitor compliance to national and international quality standards and related regulations.

• Participate in quality related activities such as audit, qualification program, claims etc

Requirement

Minimum 2 years’ experience in quality management QC related field

Diploma level or higher. Knowledge of ISO9001, ISO13485 or SS620, TAPA or TradeFIRST.

Computer literate.

Details oriented with Excellent communication skills

Able to meet deadlines

Experience in managing a team

Prior working experience in freight forwarding/Logistics industry is a plus

What you’ll do:

• Assist in conducting KYC and transaction monitoring reviews for new and existing clients. Ensure compliance with regulatory requirements related to Anti-Money Laundering (AML), Know Your Transaction (KYT), and Know Your Customer (KYC) in the crypto industry.
• Identify and conduct investigations on suspicious activity and transactions.
• Stay updated on crypto-related regulations, including but not limited to Payment Services Act (“PSA”), Digital Payment Token (“DPT”) license requirements, and Markets in Crypto-Assets (“MiCA”) regulations in Europe. Monitor and assess the impact of regulatory changes on business activities.
• Support daily operations of the compliance function. Work closely with the compliance team to ensure adherence to policies and procedures.
• Assist in monitoring the performance of regulatory compliance and Governance, Risk, Compliance (“GRC”) programs. Participate in risk assessments and compliance reviews to ensure alignment with established policies.
• Assist in responding to internal and external audits. Address queries from regulators and contribute to maintaining a state of audit readiness.
• Collaborate with senior team members to review and revise compliance manuals and GRC policies and procedures. Ensure timely updates to align with evolving regulatory requirements.
• Work closely with legal counsel to support the development of policies and procedures. Collaborate with various departments to convey compliance-related information in a clear and understandable manner.
• Collaborate with key stakeholders to implement compliance programs and initiatives.
• Conduct relevant training sessions to employees on compliance- related topics.

What you’ll need:

• 3+ years of experience in compliance within the financial services, banking, or crypto industry. Familiarity with AML/KYT/KYC/KYB practices in the crypto space.
• Basic understanding of regulatory requirements related to AML, KYT, KYC and KYB. Awareness of cryptocurrency regulations is essential.
• Strong communication skills with the ability to convey complex matters in a simple and concise manner.
• CAMS or equivalent compliance certifications are a plus.
• Willingness to learn and adapt to the dynamic regulatory environment in the crypto industry.
• Ability to work effectively within a team and contribute to the overall compliance objectives.

Essential Job Duties
▪ Manage customer complaints, corrective and preventive action programs.
▪ Work closely with customers, production and suppliers to meet the quality
requirements.
▪ Review / prepare, administer and implement Quality Assurance Plans, Inspection
Test Plans and other Operational procedures in accordance to the technical
specifications, customer's surveillance requirements, and good manufacturing /
engineering practices, and enforce the same on Operations in their execution.
▪ Work closely among inter-department to ensure committed schedules are met in
a timely and effectively manner.
▪ Responsible for product quality management, implement quality plans, drive
quality improvement projects and prepare quality report to identify problem areas
and work on problem resolutions

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )