Essential Duties and Responsibilities:

1. Quality Assurance and Control:

• Develop, implement, and maintain quality assurance plans, procedures, and control measures.
• Monitor and analyse production processes to detect and resolve quality issues.
• Ensure compliance with relevant regulatory requirements, including FDA, ISO 13485, and other applicable standards.
• Support internal and external audits and regulatory inspections.
• Investigate and resolve product-related issues, deviations, and non-conformities, with the authority to recommend corrective and preventive actions.
• Ensure the non-conformance or quality issue is resolved and complete in a timely manner.
• Participate in new product introductions to ensure quality is built into all products early in their life cycle
• Support validation processes including IQ, OQ, PQ, process validation and test method validation.

2. Process Improvement

• Identify opportunities for process improvements to enhance product quality and manufacturing efficiency.
• Lead and drive QA initiatives across the product areas
• Lead or participate in root cause analysis and corrective action planning.
• Support and drive cost improvement project

3. Customer Interaction:

• Address customer complaints and feedback related to product quality.
• Work closely with customers to understand their quality requirements and ensure that products meet their specifications.
• Communicated on any potential change request of the processes to customer.
• Provide technical support and quality-related information to customers.

4. Documentation and Reporting:

• Maintain comprehensive records of quality control activities, inspection results, and non-conformance reports.
• Prepare and support monthly / annual quality reports to management and other stakeholders.
• Ensure proper documentation and traceability throughout the manufacturing process.

5. Training and Development:

• Train manufacturing staff on quality standards, procedures, and best practices.
• Promote a culture of quality and continuous improvement within the organization.

Education/Experience and Qualifications:

• Degree in Engineering or science, with 2 - 5 years of progressive Quality responsibility, preferably in medical device / pharmaceutical manufacturing.
• Diploma holders in Engineering or science with more than 5 years' experience in Quality are welcomed to apply
• Knowledge of regulatory requirements and quality standards, including FDA regulations and ISO 13485 standards.
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues.

Description
We are seeking an experienced and highly motivated Healthcare Quality Manager to join our dynamic team to oversee and enhance the quality standards across our clinical and operational processes. This role offers a unique opportunity to work closely directly with the CEO and top-level management and contribute to the company's strategic vision within the healthcare industry. This role will be responsible for ensuring compliance with healthcare regulations, improving patient care outcomes, and optimising operational efficiency. The ideal candidate will bring a strong background in healthcare quality management, a passion for continuous improvement, and the ability to drive initiatives that ensure the highest standards of care.Develop, implement, and maintain quality assurance programs tailored to the clinical and hospital environment.
Collaborate with clinical teams, operational managers, and leadership to identify areas for improvement and implement evidence-based solutions.
Conduct thorough audits, inspections, and evaluations to ensure clinical processes adhere to regulatory standards (e.g., Joint Commission, CMS).
Analyse clinical data and operational metrics for trends and performance anomalies, driving quality improvements in patient safety and care outcomes.
Ensure the quality and efficiency of clinical operations, working closely with relevant teams to align with industry standards and patient care goals.
Provide detailed reports and direct feedback to executive leadership regarding quality metrics and clinical outcomes.
Oversee and audit clinical and operational quality, ensuring that all procedures meet healthcare regulations, standards, and internal policies.
Develop, implement, and monitor quality assurance and improvement plans across all departments.
Ensure compliance with all regulatory bodies (e.g., JCI, Ministry of Health) and maintain up-to-date knowledge of relevant regulations.
Lead the organisation in accreditation and certification processes, including preparation and follow-up on assessments.
Collect, analyse, and present quality performance data, providing actionable insights to drive continuous improvement.
Implement and track key quality performance indicators (KPIs) for both clinical outcomes and operational efficiency.
Facilitate training programs to ensure staff understand and adhere to quality standards and best practices.
Foster a culture of safety, quality, and compliance throughout the organisation.
Conduct regular internal audits to monitor compliance with internal and external standards and recommend corrective actions where needed.
Stay updated on industry trends and best practices in healthcare quality management to continuously refine and improve processes.

Requirements
A minimum of 6 years of proven experience in clinical operations and quality management, or similar role in the healthcare sector.
Strong knowledge of QA methodologies, tools, and regulatory standards applicable to healthcare.
Experience designing, implementing, and managing quality assurance programs in compliance with healthcare regulations.
Excellent communication skills with the ability to work collaboratively with healthcare professionals and influence decisions at a senior management level.
Strong analytical skills with a focus on data-driven decision making in clinical operations.
Familiarity with regulatory bodies such as the Joint Commission, CMS, and other healthcare compliance standards.
In-depth knowledge of healthcare regulations, quality standards, and accreditation processes.
Strong analytical and problem-solving skills, with the ability to interpret complex data and provide actionable recommendations.
Excellent interpersonal and communication skills, with the ability to work collaboratively across teams.
Certification in Healthcare Quality (e.g., CPHQ, Lean Six Sigma, or equivalent) is preferred.
Strong project management skills with the ability to lead initiatives from conception to completion.
Familiarity with quality improvement methodologies (e.g., Plan-Do-Study-Act, Lean, Six Sigma).

Benefits
Work in a diverse environment with people from over 10 countries
A generous leave policy
Work flexibility
Medical coverage
Annual Wage Supplement (Bonus)
Christmas Leave (The team takes the whole Christmas week off separate from our leave policy)
Birthday Leave (1 day)
Holidays off
Quarterly mental health day off
Mental health benefits (Premium access to our app!)
Work-life balance and employee wellness
Regular social events where we have non work-related fun

Apply for this job

Job Description

1. Ensure standard operating procedures (SOPs) is closely adhered to across organizational departments
2. Allocate quality activities, roles and responsibilities according to functional requirements and individual competencies
3. Ensure departments are operating in alignment with organization’s quality policies
4. Ensure that production work activities meet the required quality requirements
5. Conduct internal QMS audit on documentation where required and reporting of quality-related issues
6. Audit other departments' processes, SOPs and work areas for QA compliance
7. Audit vendors' compliance to organization’s and regulatory quality standards
8. Perform due diligence on vendor quality and to advise on contract renewals and/ or terminations
9. Plan regular internal inspections in accordance with relevant procedures
10. Ensure proper management of equipment and system qualification and validation
11. Execute required tests and inspections in accordance with inspection and test plans (ITPs)
12. Classify identified faults and prioritize corrective measures based on criticality of issues
13. Coordinate testing and commissioning work by team members and other departments
14. Coordinate with classification societies' and owners' representatives for relevant inspections
15. Facilitate continuous improvement of production quality by implementing corrective and preventative actions (CAPA) plans
16. Use quality monitoring data management systems to compile and track performance
17. Analyze quality assessment reports to identify gaps and improvements
18. Conduct transaction monitoring against quality criteria covering in-process quality oversights
19. Collaborate with the Procurement and Engineering departments to analyze the root cause of quality issues and implement quality improvement measures
20. Implement both short and long-term quality solutions in alignment with quality frameworks, policies and requirements
21. Escalate complex issues in improving work products and/or services quality to team members
22. Maintain up-to-date master lists and proper control of all released quality management system (QMS) documents
23. Ensure documents and record-keeping are in compliance with quality procedures for internal and external audits
24. Ensure quality documents related to the project are maintained regularly for final dossier compilation
25. Generate test and audit reports and present results to team members
26. Prefer immediate starter

We are representing an MNC in the Aviation and Marine Equipment industry to hire for a Quality Assurance Manager.

Responsibilities:

• Oversee and improve the QMS to meet regulatory and audit requirements.
• Lead quality initiatives, promoting best practices across the organization.
• Perform internal and external audits, ensuring corrective actions are implemented.
• Train employees on quality systems and processes.
• Manage budgets for quality-related projects and certifications.
• Conduct incident investigations and ensure proper reporting.
• Ensure compliance with licensing and regulatory standards at key locations.
• Collaborate with teams to address non-conformance issues and follow up on supplier actions.

Skills & Requirements:

• Certified in ISO9001/ AS9100 / AS9110 with strong auditing skills.
• Familiarity with Aerospace Part 145 Requirement
• Has passed the CAAS Air Legislation examination paper M10, L11, L12
• Knowledge of industry standards and quality improvement tools (Lean, Kaizen, 5S).

Interested candidates please apply here.

EA Personnel (Koh Pei Wen)

EA Reg: R23115205

APBA TG Human Resources Pte Ltd

EA License: 14C7275

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Master's degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

6 Months Contract UI Tester

Our client is a bank.

Job Description:

• Analyse business and UI requirements to create test strategy and plan

• Create UI UAT test scenarios and cases

• Execute UI UAT test cases and document test outcomes

• Raise, track and retest defects

• Work closely with project manager and IT to resolve defects

• Create test status and completion reports

Job Requirements:

• Diploma or Degree in any relevant discipline

• 3 to 5 years of relevant Quality Assurance UI Testing experience

• Salary ranges between S$3,000 to S$5,000 per month

Please send your application directly via [email protected] for a faster response.

Only shortlisted candidates will be notified.

(Jann) Tan Wei Ying (R1103708)

Email Address: [email protected]

Recruit Express Pte Ltd

EA License No: 99C4599

Recruiter's Ref Code: #BJJ

Key responsibilities:

• Participate in end-to-end projects for system implementation of machine learning system

• Engage and collaborate with Architects, Security and Development Lead to ensure solution design complies with enterprise design principles, security and control standards

• Liaise with application teams across group and countries build the enhancements according to the technical solution plan

• Analyse user requirements and convert requirements to design document and other system documentation to capture key design decisions.

• Ensure scalability and maintainability of applications

• Plan technical deliverables, perform design and development works to meet project’s requirements within schedule

• Perform data mapping and process mapping with interfacing applications

• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions

• Create technical documents for the solutions. Compile timely, comprehensive, and accurate documentation as requested

• Test, maintain and recommend software improvements to ensure strong functionality and optimization

• Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

• Partner with Test Management teams to ensure completion of SIT, UAT, performance / load testing and application security testing

• Liaise with other application teams and business users to prepare test data to support test scenarios

• Manage project change request approval windows and deployment schedule

• Facilitate and provide technical and testing support before and after production deployment

• Liaise with other units across IT and Business in the organization

• Manage external vendors for project delivery within schedule

Key Skills :

• Shell Script
• SQL, Spark
• Python
• System Diagram

Banking Compliance Technology Project: Machine Learning System & Dynamic Customer Risk Score

- This role is not data engineering and not suitable for Data engineers who have never worked on a user facing application. Databases are not considered~ applications

- This role is a not a System integrators.

- This role is not a Pure project managers/scrum masters. The person has to be hands on

- This is a *Application Solutioning Role*

Responsibilities:

• Act as a liaison officer with the Monetary Authority of Singapore (MAS)
• Assist with all regulatory submissions, surveys and questionnaires
• Ensure ongoing compliance for a Capital Markets Services (CMS) License Holder
• Assist with the onboarding and periodic reviews of investors
• Handle internal and external audit matters
• Assist with the update and maintenance of compliance registers (i.e., personal share dealing, conflicts of interests etc.) and internal policies and procedures
• Assist in the preparation of Board meeting materials and presenting to the Board on operations and compliance matters
• Perform annual outsourcing due diligence reviews for outsourced service providers
• Assist in the monthly review of investors’ risk management checklists
• Assist to plan the Firm’s annual business continuity test
• Work closely with and liaise with an external compliance consultant in matters relating to regulatory compliance.
• Ensure proper record keeping and support the Firm in all tasks related to operations

Requirements:

• Degree in Business or any related disciplines.
• Candidate should have at least 3 years of risk/operations and/or compliance experience in a financial services/asset management industry.
• Good understanding of MAS regulatory requirements;
• Meticulous and detail oriented;
• Excellent interpersonal skills, and ability to work independently;
• Self-starter who can work effectively independently;
• A self initiatied worker who can follow through with assigned tasks and meet deadlines.

Responsibilities:

• Perform detailed and ongoing AML/CFT review and risk monitoring on clients account and transaction flows. Follow-up with account and transaction analysis and clarification of transactions with front-line staff, where needed.
• As and when required to perform name screening.
• Ensure SOW/corroboration is uplifted to the latest bank standards.
• Ensure KYC information and documentation is refreshed and up to date.
• Ensure KYC parties are correctly identified and screened.
• Ensure proper and timely escalation to AML team and highlight concerns with proposed rectification action required.

Requirements:

• Degree with 1 to 2 years of KYC Periodic Review or Name screening experience in a banking environment
• Prior experience working in a private bank setting would be an advantage.

Please state your availability, current and expected salary in the resume.

Qualified or interested candidates, please visit our GMP website at www.gmprecruit.com/current_jobs/posting.aspx to apply for this position with GMP Job Code: 24951

Tel: 6233 0482 - Eddie Tang (R1221129)

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Eddie Tang | Registration No: R1221129

Industry: Shipping Services Industry
Location: West
Working Hours: Monday Friday, Office Hours
Good Remuneration Package

Process Management:

• Work with respective departments (Process Owner) to ensure that the overall process for the Company is efficient and effective.
• Manage process documentation flows to ensure that the processes for all departments are fully documented.
• Be the subject matter expert for business systems (AX, Cloud and etc.) and collaborate with IT to work on changes for system improvements
• Be the neutral party in investigating and documenting the root cause of customer complaints and disputes.
• Manage the documentation of customer complaint reports to clearly document the root cause and corresponding improvement plan to address the root cause.
• Follow through and ensure effective implementation of changes to the improvement required by respective departments in solving issue identified
• Be the neutral party in reviewing the issue and solution of improvement areas raised by respective departments in Improvement Potential System
• Lead process re-engineering, to reduce turnaround time for end-to-end processes and improve customer experience.

Quality Assurance:

• Developing, implementing, and maintaining quality management systems based on ISO standards - ISO 9001, ISO 14001, ISO 45001, and ISO 22000.
• Conduct regular audits to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.
• Stay up-to-date with the latest developments in ISO certifications, as well as industry best practices, and incorporate them into the quality management system.
• Lead the preparation of audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.
• Represent the company in quality-related matters with external stakeholders, including customers and regulatory bodies.

Requirements:

• Bachelor's degree in a relevant field (Quality Management, Business Management, Business Process Management and etc.); Advanced Diploma or certifications (e.g., Six Sigma, CQE) are a plus.
• Minimum of 3-5 years of experience in business process management and quality control, with primary focus on business process management.
• Strong understanding in business process management aspects.
• Strong understanding of ISO 9001, ISO 14001, ISO 45001 and ISO 22000 Standards, with the ability to interpret and implement their requirements effectively.
• Proven experience in managing quality control, driving continuous improvement initiatives, and fostering a culture of quality excellence.
• Proficiency in quality control methodologies and root cause analysis techniques.
• Familiarity with quality management software and tools.

Please send your updated cv to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena
EA Registration No.: R1872533

People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9755

JOBID: QVRY98X6

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in providing engineering solutions. Due to business needs, they are now recruiting a QC Inspector to be part of their Manufacturing Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of QC Inspector:

• Handling goods, including picking, packing, and unpacking.
• Ensuring proper use, care, and maintenance of warehouse tools and equipment.
• Maintaining a clean, safe, and organized warehouse environment.
• Supporting other warehouse-related activities as needed.
• Assisting with additional tasks as assigned by the supervisor.

Requirements:

• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Essential Functions

· The Quality Assurance Specialist is an adept technical writer/editor and the use of desktop Office applications.

· The QA Specialist must become familiar with site databases and proficient in the retrieval and presentation of information.

· The QA Specialist will trend this information using the graphical features of Microsoft Excel and display these in Microsoft Word reports. A major example is the Annual Product Review (APR).

· In addition the QA Specialist will lead in Change Control decisions and work with other departments to identify and solve issues that impact the product validation or the regulatory state.

· The QA Validation Specialist not only works with all site departments but supports Corporate Regulatory and R&D needs as well.

· The QA Specialist will support Regulatory Affairs with technical writing as pertaining to equipment and processes for product submissions and Request for Information (RFI).

· The QA Specialist will provide project support for the New Product launches and utilize Microsoft Project to organize site deliverables.

· Additional responsibilities may include assisting with validation activities associated with equipment and/or processes.

· The job may require travel to vendor sites to complete Factory Acceptance Testing in order to accept equipment for the site. Expect travel of less than 10%.

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• No Experience Needed, Full training/ on the job guidance will be provided
• Able to start immediately
• 
  

If you are interested in any of the positions, do kindly drop your most updated resume to l[email protected]

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Compliance Assistant Manager (Banking)

You will be responsible for ensuring compliance of the operation at Singapore branch of a Japanese bank. You will reports directly to General Manager of the branch. There is chance for potential career progression within the bank.

Job Responsibilities:

• Perform KYC/CDD works and AML checks considering priorities and efficiency.
• Review our branch's KYC/CDD procedures and AML/CFT manual, taking market practices into account.
• Maintain good relationship with the local authorities (mainly MAS) and the audit firms, obtain information on latest regulations, and share with related people in the organization.
• Draft policies and procedures manuals for relevant areas.
• Prepare reports for the local authorities and the Headquarters in time to meet the deadline.
• Regularly monitor the branch operations and make sure they comply with the rules and propose improvements
• Conduct compliance training sessions for branch staff regularly.
• Handle legal matters, consult with legal counsel if necessary.
• Facilitate smooth communication with other departments.

Job Requirements:

• At least 3 years of Banking experience is required
• At least 2 years of Compliance experience is required
• High ability of collecting information and grasp latest low and MAS regulations as timely manner.
• Experience in compliance department in a bank or advisory experience for banks.
• Mandarin speaking language skill is required to liaise with Mandarin speaking counterparts

Interested applicants, please send your resume to Tiffany (R1104633) with email subject header "Job Application for Compliance Assistant Manager - TK " .

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find our Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

R1104633

Koh Jia Wen

Service Assurance Architect- In this new role, you will be managing the Day 1 Technical Services and Day 2 Managed Operations Service offer who is going to report to Delivery team. This function will serve as Check and Balance for any new pursuit between Sales, Pre-Sales and Delivery.

You Will:

1. New Pursuit Evaluation:

• Early Involvement: Service Assurance participates in initial sales meetings and bid reviews to assess the feasibility and risks of new opportunities.
• Service Fit: They determine if the proposed solution aligns with the organization's standard service catalogue and can be delivered with existing capabilities.
• Due Diligence: Service Assurance performs due diligence on potential clients, reviewing their requirements, technical environment, and any potential challenges.
• Go/No-Go Decisions: They provide input on whether to pursue an opportunity based on their assessment of risks, resource availability, and potential for success.
• Act as Technology Infrastructure SME for Network & Security Design. (Critical)

2. Standardization Check:

• Mapping to Standards: Service Assurance ensures that proposed solutions map to standardised service offerings, configurations, and delivery processes.
• Deviation Management: If customization is required, they assess the impact of deviations from standards and ensure they are documented and approved.
• Knowledge Base: They maintain a knowledge base of standard services, configurations, and best practices to guide solution design and delivery.

3. SLA Negotiations:

• Realistic SLAs: Service Assurance works with Sales, Pre-sales and Delivery to define SLAs that are realistic, measurable, and achievable based on the organization's capabilities and resources.
• Performance Metrics: They establish clear performance metrics and measurement methods to track SLA compliance.
• Risk Assessment: They assess the risks associated with meeting specific SLAs and identify potential mitigation strategies.

4. Risk Assessment:

• Proactive Identification: Service Assurance architect proactively identifies potential risks across all stages of the service lifecycle, including technical, operational, financial, and reputations risks.
• Risk Analysis: They analyse the likelihood and impact of identified risks, using tools like risk matrices and probability assessments.
• Mitigation Planning: They develop and implement risk mitigation plans, outlining specific actions to reduce the likelihood or impact of risks.

5. Sizing and Scoping:

• Resource Estimation: Service Assurance works with Delivery to accurately estimate the resources required to deliver the proposed solution, including personnel, technology, and time. He/she will also be based on Standard Service Catalogue and sizing calculator as a base to do the estimate. Any deviation of the costing, will need to be signed off and any major deviation will need to be documented as risk.
• Scope Definition: They help define the scope of work, ensuring it is clearly documented and agreed upon with the client.
• Costing and Pricing: They provide input on costing and pricing models to ensure profitability and competitiveness.

6. Continuous Improvement:

• Performance Analysis: Analyse service delivery performance data to identify trends, areas for improvement, and opportunities to optimize processes and efforts sizing in the Standard Service catalogue.
• Innovation: Explore new technologies, methodologies, and best practices to enhance service delivery and drive continuous improvement.

You Bring:

1. Education:

• Bachelor's degree in Information Technology, Computer Science, Engineering, or a related field.
• Relevant certifications are highly valuable, such as ITIL (Information Technology Infrastructure Library), Cloud Certifications, CCIE-R&S, Security, Data Centre, Service Provider, Advance Design. etc.

2. Experience:

• Years of Experience: At least 10 years of progressive experience in Pre-Sales, Technical Architect or IT service management
• Service Design and Delivery: Proven experience in designing, implementing, and managing IT services, with a focus on quality, reliability, and efficiency.
• Risk Management: Demonstrated experience in identifying, assessing, and mitigating risks associated with IT service delivery.
• SLA Management: Experience in defining, negotiating, and managing service level agreements (SLAs).
• Compliance and Governance: Experience in ensuring compliance with relevant industry regulations, standards, and legal requirements.
• Process Improvement: Experience in analysing and improving service delivery processes to enhance efficiency and effectiveness.

3.Technical Skills:

• IT Infrastructure: Strong understanding of IT infrastructure components, including networks, servers, storage, and databases.
• Cloud Computing: Familiarity with cloud computing platforms and services (e.g., AWS, Azure, GCP).
• Automation: Knowledge of automation tools and technologies used in service delivery (e.g., RPA, scripting).
• Monitoring Tools: Experience with service monitoring and management tools.
• Data Analysis: Ability to analyse service performance data to identify trends and areas for improvement.

4.Soft Skills:

• Communication: Excellent written and verbal communication skills, with the ability to effectively communicate technical information to both technical and non-technical audiences.
• Collaboration: Strong collaboration and interpersonal skills, with the ability to work effectively with cross-functional teams.
• Problem-Solving: Excellent analytical and problem-solving skills, with the ability to identify and resolve complex issues.
• Leadership: Demonstrated leadership skills, with the ability to influence and guide others.
• Presentation Skills: Ability to create and deliver effective presentations to stakeholders.

5.Beyond the Basics:

• Experience in the SI is a must.
• Consulting Experience: Prior experience in a consulting role can be beneficial, as it often involves working with different clients and solving diverse challenges.
• Agile and DevOps: Familiarity with agile methodologies and DevOps practices is increasingly valuable in today's fast-paced IT environment.

Primary Responsibilities and Duties

l · Support Chair of Kent Ridge Office of Innovation on planning and driving of newly set-up

l office, developing necessary approval papers and documents, establishing new department

l processes, including timeline management, stakeholder engagement, tracking of project

l progress and deliverables.

l · Lead and develop innovation capabilities and implement new innovations into the culture to

l influence the overall operations.

l · Facilitate Quality Improvement and Innovation workshops such as lean and human-centred

l tools to impart knowledge and skills to hospital staff.

Desirable Technical Skills

l · Bachelor’s Degree Business Analytics/Computer Science/Engineering/Business

l Administration or related fields.

l · Ability to leverage technology solutions to support quality improvement initiatives.

l · Proficient in programming tools such as Python and RPA and good understanding of AI tools

l to help boost productivity.

l · Proficient in LEAN/Six Sigma/AGILE/Design Thinking/Behavioural Insights preferred.

l · Certified Train-the-trainer (ACTA/ACLP) or equivalent preferred.

Desirable Soft Skills

l · Highly motivated self-starter and able to collaborate effectively across different stakeholders

l and work through people in the hospital such as doctors, nurses, allied health professionals,

l administrators and Senior Leaders.

l · Strong project management experience, action-oriented and results-oriented.

l · Curious and eager to find new knowledge and be critical to staying updated on the latest

l developments in healthcare.

l · Able to work independently and as a team.

l · Ability to perform even under tight timelines.

l · Excellent communication, writing, interpersonal, and presentation skills.

l · Passion for driving innovative culture and creating positive change within the organization.

About Our Client:

Our client is a leading engineering and fabrication company specializing in the design and fabrication of process equipment for the oil & gas, petrochemicals, chemicals, and energy industries. With over 50 years of experience, they pride themselves on their commitment to quality and innovation, operating from a state-of-the-art facility equipped for the fabrication of various materials.

Job Overview:We are seeking a dedicated and experienced QA/QC Engineer/Assistant Manager to join our client’s team. The successful candidate will be responsible for ensuring that products meet the highest quality standards and comply with industry regulations. This role involves overseeing quality assurance processes, conducting inspections, and collaborating with production teams to enhance product quality.

Key Responsibilities:

• Develop, implement, and maintain quality assurance policies and procedures.
• Conduct regular inspections and audits of manufacturing processes and finished products.
• Collaborate with engineering and production teams to resolve quality issues and improve processes.
• Prepare and review quality documentation, including quality plans, inspection reports, and non-conformance reports.
• Monitor compliance with industry standards and regulations, ensuring all products meet required specifications.
• Provide training and support to staff on quality control procedures and practices.
• Assist in root cause analysis and corrective action implementation for quality-related issues.
• Maintain accurate records of inspections, audits, and quality metrics.
• Support the preparation for external audits and customer inspections.
• Stay updated with industry trends and advancements in quality assurance practices.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 3-5 years of experience in quality assurance/control within the engineering or manufacturing sector.
• Knowledge of industry standards (e.g., ASME, ISO 9001) and quality control methodologies.
• Strong analytical skills and attention to detail.
• Excellent communication and interpersonal skills.
• Proficiency in quality management software and tools.
• Ability to work collaboratively in a fast-paced environment.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Key Responsibilities:

• Ensure the organization adheres to statutory and regulatory requirements.
• Provide support and advice to the board of directors on governance matters.
• Prepare agendas, board papers, and minutes for board meetings.
• Ensure compliance with corporate governance policies and frameworks.
• Develop and oversee risk management strategies to identify, assess, and mitigate risks.
• Monitor and review the company's risk exposure and implement strategies to minimize it.
• Conduct risk assessments and maintain risk registers.
• Report on key risk indicators to senior management and the board.
• Ensure the company complies with all relevant laws, regulations, and internal policies.
• Implement and maintain compliance programs and procedures.
• Liaise with regulatory authorities and ensure timely submission of reports.
• Conduct compliance audits and investigations to identify potential risks or breaches.
• Ensure timely filing of statutory documents with regulators (e.g., annual returns, financial statements).
• Maintain and update company records, including registers of shareholders, directors, and officers.
• Act as an advisor to the board on legal, regulatory, and corporate governance matters.
• Stay updated on changes in legislation, regulations, and industry best practices.
• Provide guidance on matters related to company law, risk, and compliance.
• Assist in the development and implementation of risk management and compliance policies.
• Ensure that policies are aligned with the company's strategic objectives and regulatory requirements.

Key Skills and Qualifications:

• Strong knowledge of corporate governance, risk management, and compliance frameworks.
• Excellent understanding of relevant laws, regulations, and industry standards.
• Strong communication skills and ability to advise and influence senior management and the board.
• Ability to manage and mitigate risk in a dynamic corporate environment.
• Analytical and problem-solving skills to assess and address potential compliance or governance issues.
• Strong organizational skills and attention to detail.
• Bachelor's degree in Law, Business Administration, Risk Management, or a related field.
• Professional certifications in governance, risk, or compliance (e.g., Certified Risk Manager (CRM), Chartered Secretary (ICSA), or Certified Compliance and Ethics Professional (CCEP)) are advantageous.

Savita Rai

EA REG NO: R1873418

EA License No:23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Key Responsibilities:

• Develop, write, and execute validation protocols (IQ, OQ, PQ) for equipment, utilities, and systems in the pharmaceutical manufacturing environment.
• Perform process validation for manufacturing processes, ensuring products are consistently produced and controlled according to quality standards.
• Conduct cleaning validation to confirm the effectiveness of cleaning processes in preventing contamination.
• Collaborate with cross-functional teams including Quality Assurance, Production, Engineering, and R&D to ensure validation activities are aligned with project timelines and regulatory requirements.
• Perform risk assessments and develop validation strategies for new or modified equipment, processes, and systems.
• Review and approve validation documents, ensuring they comply with regulatory guidelines, industry standards, and company policies.
• Troubleshoot and resolve validation issues that arise during production, ensuring timely remediation.
• Maintain detailed validation records, ensuring traceability and documentation for audits and regulatory inspections.
• Support regulatory inspections by providing validation documentation and answering questions related to validation processes.
• Stay updated on changes in regulatory requirements and ensure the company’s validation practices are aligned with the latest standards.
• Provide training to relevant staff on validation processes and protocols as required.

Qualifications:

• Bachelor’s degree in Chemical Engineering, Chemistry, Life Sciences, or a related field.
• 3 years of experience in validation within the pharmaceutical or biotech industry.
• In-depth knowledge of validation principles, including equipment qualification, process validation, and cleaning validation.
• Familiarity with Good Manufacturing Practices (GMP), FDA regulations, and other industry guidelines (e.g., ICH, EU GMP).
• Strong problem-solving and analytical skills, with the ability to troubleshoot validation issues.
• Excellent communication skills, both written and verbal, for writing protocols and reports as well as interacting with cross-functional teams.
• Detail-oriented, with strong organizational skills and the ability to manage multiple validation projects simultaneously.
• Proficient in using validation software and tools (preferred).

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

• Reviews and updates organization Quality policy and objectives for Management’s approval
• Reviews & updates company Occupational Health & Safety policy & objectives for Management’s approval
• Prepares, reviews and updates Quality Management System (QMS) and Occupational Health and Safety Management System (OHSMS) manuals, procedures and forms
• Interprets and implements quality assurance standards and procedures
• Reviews the implementation and effectiveness of standards and procedures
• Plans & conducts internal audits for ISO 9001:2015 & ISO 45001:2018 as scheduled in the annual work plan
• Plans and conducts Management Review Meeting for ISO 9001:2015 and ISO 45001:2018
• Manages 3rd party certification body audits for ISO 9001:2015, ISO 45001:2018 and BizSafe STAR
• Co-ordinates with respective Departments for the preparation for external audits
• Follow-up on post audits activities
• Manages Document Control for all QMS and OHSMS documents to ensure latest revision
• Supports and works with various departments in procedure reviews and updates, ensures changes are incorporated in a timely manner and assists in assessment of these changes
• Identifies training needs and organizes training interventions to meet quality standards
• Conducts Factory Acceptance Test (FAT), workshop fabricated items inspection and onboard completion inspection both internally and externally
• Prepares inspection reports of inspection outcomes and updates overall inspection status summary
• Liaises with Clients and CLASS Surveyors on external inspection
• Monitors and expedites closure of all non-conformances of the company, if any
• Responsible to create and review Risk Management Plan for projects