The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach Engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500, VIISTA900, Axcelis GSD, Axcelis HE/VHE. AMAT XR80.
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capability to lead and provide guidance to juniors
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

You are responsible for the commissioning, repair and maintenance of medical equipment. You will also be required to carry out safety and hazard investigations and inventory management.

Requirements:

• Diploma in Electronic/Electrical/Biomedical/Mechanical & Electrical Engineering or NITEC/Higher NITEC with at least 4 years’ relevant working experience
• Good interpersonal and communication skills
• A committed and highly motivated individual who takes pride in your work
• Proficient in Microsoft Office applications
• Require to attend to essential technical support after office hours, weekends and public holidays

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gwZfs7rD

• Exposure to latest technologies Cloud Azure
• Regional role

About the company

Our Client is an established company within their industry. They have a well-established presence of more than 20 years with a global footprint of more than 20 countries. With rapid expansion plan, they are now looking for an Senior System Engineer / System Administrator ( Azure, O365, Office365) to join their team.

About the job

Reporting to the IT Manager, your role involves:

• Designing cloud-based infrastructure solution and deploying scalable highly available systems on Azure
• Support, troubleshoot and implement products and services deployed on the Azure platform.
• Supporting and maintaining the Windows Servers and Office 365
• Managing external vendors, ensuring SLA is being adhered to
• Supporting continuous improvement by investigating alternatives and new technologies and presenting these for architectural review. Thins includes reviewing the current infrastructure solutions to identify

Skills and experience required

As a successful applicant, you will have at least 8 years of experience in Windows Server / System

Candidates with proven track record in Azure Cloud is required for this role.

Whats on offer
This is an excellent opportunity to join an established company with regional / global exposure.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gwZfs7rD (EA: 94C3609/ R1219669)

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Desktop Support Engineer (AE) - Training provided

• Willing to work at Changi/Loyang area
• Training will be provided
• Able to start work immediate

The Opportunity

• Installation/configuration of OS and applications including in house applications
• Installation /configuration of accessories, peripherals and mobile devices
• Troubleshoot and resolve desktop incidents
• Handle printer problems at users’ desktops
• Perform workstation OS patching and Anti-virus patching for workstations which could not be patched via server push-downs
• Assist in providing technical information and knowledge
• Procurement of IT desktop/laptop equipment and update of Assets
• Manage Delivery/shifting /Install PC and Printers to locations

Job Requirement:

• NITEC/ Higher NITEC in Information Technology or equivalent.
• Good knowledge of MS Office tools installation & troubleshooting and Printer support
• Basic knowledge of Active Directory and SCCM
• Excellent customer service and people skills
• Field experience supporting a variety of technologies and services
• Solid troubleshooting skills on Windows operating systems
• Willing to work at Changi/Loyang area

Responsibilities:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Requirement:

• Degree in Information Technology or design field, or equivalent work experience.
• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

P/S : Applicant to include the portfolio link in CV.

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Cloud Engineer
Responsibilities:

• Infrastructure Management
• Architect, design, and implement cloud-based solutions that align with both business objectives and technical requirements.
• Collaborate with development and operations teams to seamlessly integrate cloud solutions.
• Implement Infrastructure as Code (IaC) methodologies to automate and streamline the deployment and management of cloud resources.
• Continuously optimize cloud infrastructure for performance and cost-efficiency.
• Monitor and analyze cloud performance, making proactive adjustments as needed.
• Provide technical leadership and mentorship to engineering teams on cloud architecture and best practices.
• Stay abreast of emerging trends and technologies in cloud computing.
• Recommend appropriate cloud services based on project requirements.
• Ensure compliance with security standards, regulatory requirements, and best practices in cloud security.
• Conduct regular security audits and assessments.
• Manage vendor relationships with cloud service providers and technology vendors, stay updated with vendor offerings, and negotiate contracts.
• Act as a subject matter expert on cloud architecture, participate in technical discussions and provide guidance to stakeholders.
• Provide mentorship, training, and hands-on support to help teams develop necessary skills and expertise.
• Plan, implement, and maintain SMU's enterprise and research infrastructure (HPC), including private and public cloud computing, as well as all relevant research hardware to meet SMU's diverse research computing needs.
• Plan, formulate, and architect the growth of research infrastructure (HPC) to cater to the needs of SMU researchers, enhancing faculty productivity in research.
• Manage and administer of CMDB system to ensure the completeness and currency of asset information.
• Develop, maintain, and execute system operation procedures (e.g., IT Disaster Recovery) to improve service availability, reliability, and redundancy.

Consultancy and Support

• Collaborate with business units to gain a better understanding of their goals, technical requirements, and current infrastructure.
• Develop tailored cloud solutions that align with business requirements, focusing on scalability, reliability, security, and cost-effectiveness.
• Provide support to business units in their Cloud project initiatives.
• Troubleshoot issues, resolve technical challenges, and deliver ongoing support after post-implementation.
• Conduct induction programs to raise awareness of cloud computing and research platforms within the SMU community. Develop presentations, documentation, and user guides for individuals utilizing cloud computing services and High-Performance Computing Clusters (HPCC).

Projects

• Manage IT projects for existing system enhancement and new system implementation.
• Establish project plans, milestones, and deliverables.
• Monitor project progress and review project performance against key metrics.
• Maintain a risk tracker and mitigation plan.
• Provide status updates and reports on project progress.
• Provide leadership and motivation to the project team.
• Manage expectations and address concerns proactively.
• Ensure the project is kept within the project scope, budget, and timeline.
• Maintain comprehensive project documentation throughout the project life cycle.

Requirements:

• Bachelor’s degree or diploma in Computer Science, Computer Engineering, IT or equivalent from an established Institution
• Relevant Cloud platform certifications (e.g. AWS Certified Solution Architect, Azure Solutions Architect Expert) are a plus.
• Relevant Linux System Administration certifications (e.g. Red Hat Certified System Administrator) are a plus.
• At least 5 years of work experience with Cloud platforms such as AWS and Azure Cloud.
• Proficient in Cloud computing concepts, architectures, and service models (IaaS, PaaS, SaaS);
• Cloud platforms such as AWS, Azure, or Google Cloud Platform, including their services and features;
• Networking fundamentals, including TCP/IP, DNS, VPN, and routing in cloud environments;
• Cloud security principles, encryption, identity and access management (IAM), and compliance requirements;
• Cloud platform monitoring, logging, and alerting tools to ensure the performance and reliability of cloud resources;
• Infrastructure provisioning and management tools like Terraform and CloudFormation.
• Working knowledge of DevOps methodologies, continuous integration/continuous deployment (CI/CD), and automation tools;
• Containerization technologies such as Docker and container orchestration platforms like Kubernetes;
• Cloud-based storage solutions, databases, and data analytics platforms.
• Proficient in performing Linux server cluster administration;
• Scripting languages, including Python and Bash, with the ability to automate tasks and enhance workflow efficiency;
• ServiceNow CMDB administration.
• Working knowledge of ISO27001 information security standards, regulatory compliance, and best practices for Cloud governance.
• Strong technical, analytical, and troubleshooting skills, with confidence in delivering frontline support and expertise across diverse academic disciplines and areas.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.:R24124220 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Engineer, Quotation & Tendering to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Handle tendering processes and engage with clients from oil companies through various communication channels.
• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Draft and compile technical documentation, such as datasheets, proposal designs, and tender technical answer sheet.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Be available for standby support to manage 24/7 maintenance calls.
• Offer on-site services, including deployment, testing and preparation of documentation.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ experience in IT network support and database administration.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer (Thales) to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Manage PKI and key management practices.
• Possesses strong expertise in cryptographic principles, hardware security modules (HSMs), and key management systems.
• Responsible for configuring and operating Thales SafeNet HSMs.
• Responsible for integrating cryptographic libraries and HSMs with applications.
• Involve in the information security architecture, including firewalls, monitoring tools, encryption, web proxies, etc.
• Responsible for designing and implementing enterprise key management solutions.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ experience in IT network support and database administration.
• Knowledgeable in programming languages such as C/C++, Java, or .NET.
• Certified CCNA or CCSA is an advantageous.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Conducting maintenance service, commissioning of alarm systems
• Address to customer request on alarm and card access systems

Requirements:

• Basic Security certified
• At least 2 years of working experience
• Possess valid class 3 driving license

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

We are seeking a skilled Backup and Storage Engineer with hands-on experience in Veeam Backup, Veritas Backup, and storage management. The candidate will play a crucial role in managing the organization’s backup infrastructure and storage environments, ensuring data availability, security, and optimal performance across multiple sites. The role requires flexibility for occasional weekend and after-hours support, as well as travel between various locations.

Key Responsibilities

Backup Responsibilities:

• Design, implement, and manage backup and recovery solutions using Veeam Backup & Replication and Veritas Backup Exec/NetBackup.
• Monitor, optimize, and troubleshoot backup systems, ensuring they are running efficiently and that data is protected.
• Conduct routine and ad-hoc backups, verifying data integrity and meeting compliance requirements.
• Test and document disaster recovery plans, ensuring systems can be restored rapidly in case of failures or disasters.
• Perform system upgrades and patching for backup solutions, ensuring compatibility with the overall infrastructure.

Storage Responsibilities:

• Install, configure, and manage storage systems (SAN, NAS, DAS) across multiple environments, ensuring high availability and performance.
• Monitor storage utilization and capacity, optimizing storage allocation and planning for future growth.
• Troubleshoot and resolve storage-related issues, ensuring minimal downtime and maximum performance.
• Implement storage provisioning for various platforms (Windows, Linux, Unix, VMware), ensuring efficient data access.
• Ensure storage security by managing encryption, access control, and data integrity protocols.
• Document storage configurations and procedures, ensuring the technical documentation is up to date.

General Responsibilities:

• Collaborate with other IT teams to ensure seamless integration of storage and backup systems with the wider IT infrastructure.
• Perform regular maintenance and upgrades of backup and storage environments, following best practices to minimize downtime.
• Provide support outside of regular business hours (including weekends) for emergency troubleshooting, planned maintenance, and disaster recovery operations.
• Travel to multiple sites for on-site support, installations, and storage/backup-related troubleshooting.

You Bring:

• Hands-on experience with Veeam Backup & Replication and Veritas Backup Exec/NetBackup solutions.
• Strong knowledge of storage technologies such as SAN, NAS, iSCSI, and Fibre Channel.
• Experience with virtualization technologies (e.g., VMware, Hyper-V) and their interaction with storage systems.
• Proficiency in storage management tools and practices, including RAID configuration, storage tiering, and volume management.
• Familiarity with data replication, data migration, and disaster recovery techniques.
• Knowledge of storage security measures, including encryption, access control, and secure data disposal.
• Scripting and automation skills (PowerShell, Python, or similar) for managing backup and storage tasks are a plus.
• Flexibility to work on multiple sites and handle after-hours support, including weekends.
• Excellent problem-solving and troubleshooting skills, with the ability to handle critical incidents under pressure.
• Strong documentation and communication abilities.

Preferred Qualifications:

• Certifications in Veeam, Veritas, or storage technologies (e.g., NetApp, EMC, HPE).
• Experience with cloud-based storage and backup solutions.
• Familiarity with data retention, archiving, and compliance standards.

Operations Engineer (CaaS, Chiller, Air-con, Repair work, quotation, timesheets)

Company highlights

• Be an expert of Sustainable solutions of CaaS

• Market leader of cooling as a Service in Asia

• Job stability for long-term career growth

Job Description

• Schedule periodic Service and Maintenance (S&M) and ensure service reports for periodic S&M are properly documented and stored.

• Prepare quotations, organise and carry out necessary repair work.

• Chiller Plants are operating at or better than baseline efficiency

• Chilled Water / Air is supplied to the Customer at the right temperatures, during the operating hours

• Chiller plant assets are maintained and available for operations when needed

• Prepare incident reports; review servicing reports from vendors for any insurance claims for any major repair works. Service reports (internal or by vendor) or documented properly and stored

Requirement

• Diploma or above in Engineering, Mechanical, or related disciplines.

• 5 years of relevant experience in ACMV systems, preferably in a similar role.

If you are interested in this opportunity, submit your application now to find out more about this position.

We regret that only shortlisted applicants will be contacted. Thank you.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765

Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423

We are seeking a dynamic Junior Data Engineer to join our Regional Data team to help foodpanda make smart, data-driven business decisions. We maintain data ingestion pipelines while creating and maintaining products and frameworks to empower teams to craft insights and build quality data products.

Responsibilities

• Architecting, defining, and building data pipelines to enable faster, better, data-informed decision-making.
• Ingesting first and third-party data sources into our petabyte-sized data warehouse.
• Curating and maintaining high-quality data assets so our data scientists and analysts can make informed decisions and create better products.
• Creating and maintaining tools that enable data consumers to use our data better.
• Collaborating with cross-functional teams to deliver high-quality data assets.

Reporting to the Flow Manager, he/she will be responsible for driving and meeting product reliability and improving product yield.

Job description

- Prepare and submit concessions to OEMs for out-of-scope repairs.

- Liaise with OEMs on technical queries or any other matters as

required.

- Provide technical support and leadership to the shop floor, as well

as to various sections requiring engineering inputs.

- Support shop floor on modification of existing fixtures and

designing of new ones.

- Ensure that all matters pertaining to product or process are

managed efficiently.

- Ensure that all the technical problems are resolved in a timely

manner, hence enabling smooth operation and production

- Liaise with Marketing & Customer Service Department to ensure

that all technical requirements set out by the customers are met.

- Carry out feasibility studies for new capability setup as well as

initiate and carry out the set up.

- Set up new specification capability on existing special processes.

- Review special processes requirement for new product part

number / CMM.

- Set up new Equipment / Machine or modify existing set up for

increase in capacity.

- Conduct investigation and issue warranty reports

Perform process nonconformance gap analysis.

Create and maintain necessary shop documentation to ensure compliance with CMM & other specification revision:

- Overhaul Routers

- Lot Sheets

- ICR

- Bushing Installation Sheets

- OHRW Assembly/ Dis Assembly Worksheets

- OHRW Process Sheets

- Plating Data Sheets

- Plating Masking Data Sheets

- NDT technique sheets

- Procedures

- Forms

Candidate skills & requirements

- Knowledge of MS Words, Excel & PowerPoint

- Project Management

- Special process knowledge

- Robotics programming is a plus

- CAD experience is a plus

Job Description

• Monitor systems performance and usage, including response times.
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting.
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security.
• Provide technical advice to the team and clients on installation, setup, configuration of systems.
• Implement plans to make systems available to users in a shared, secure and controlled manner.
• Identify any complex system issues to provide advisory to the stakeholders.
• Install, configure, and maintain server operating systems (Windows/Linux/VMWare).
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup.
• Develop automated processes to define, measure, and report on service quality, stability and capacity.

Requirements

• At least 3 years’ experience in developing, implementing and maintaining IT systems.
• Systematic in approach and familiar with enterprise level trouble shooting.
• Bachelor's Degree/Diploma in Computer Science, Engineering or equivalent.

EA Licence No: 11C5502 | EAP Registration No: R21100522

Job Description :

1. Need to take Bar Bending Schedule from rebar structural drawings.

2. Need to Take the exact rebar quantities from the provided drawings.

3. Submission of Cost control reports for total rebars received & total rebars used & wastages.

4. Able to test and use the communication devices.

Job Requirements :

1. Experience in Bar Bending Schedule.

2. Diploma or above relevant qualifications.

3. Previous Singapore work experience will be an added advantage

Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Perimeter Protection System (PPS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Audiovisual System

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.

 Work closely with team members to meet client’s service delivery level agreement

 Able to work and coordinates with contractors and clients

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Understands technical documentation, installation manuals, system drawings etc.

 Able to read and orientate construction drawing, floor plan, etc.

 Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Understands technical documentation, manuals, as-built system drawings etc.

 Works independently without supervision and communicates well with team members, partners, and clients

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Carries out any other technical related duties that may be required

 With knowledge on construction site safety and regulatory requirements

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Work Location Mostly outdoors on different sites across Singapore

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Ability to manage and communicate effectively with stakeholders

• Deliver integration standards to reduce operational risk and deliver operational excellence

• Define detailed technical requirements and scope of work for vendor or bank team for implementation

• Drive business and control partner initiatives such as Compliance Assurance and Communications Surveillance

• Support automation initiatives with goal of delivering service excellence and meeting compliance requirements

• Excellent organizational and communication skills

• Detail oriented

• Demonstrated ability to work as part of a team

• Ability to manage and communicate effectively with stakeholders

• Experience in Enterprise voice solutions/services and basis knowledge of server OS / configuration

• Effective communication skills with the ability to communicate technical information and manage difficult and complex stakeholder relationships at all levels

• Results driven with a strong desire to succeed and see all project and client deliverables through to completion

• Team Player with a “can do” attitude

• Experience working in the financial or banking industry, is a plus

• Takes ownership and accountability for actions / getting thing done and achieving quality of result

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Responsibilities:

• Plan and lead the execution of a comprehensive deployment plan, including work planning, scheduling, budgeting, metrics, training, pilots and resources.
• Collaborate with all project teams to ensure alignment between all deployment-related activities.
• Liaising with the customer technical representatives.
• Provide recommendations to client on deployment of new features.
• Create and Manage requests on ITSM tool.
• Implement the changes as applicable, test the changes and handover to customer.
• Troubleshoot issues with Network Deployment.
• Troubleshooting critical incidents and problem tickets.
• Identify potential failures and recommend solution.
• Capacity management, forecasting and recommendation.

Requirements:

• L3 Network Engineer with min 7yrs of experience
• Good To Have Skills: No Technology Specialization.
• Should have supported Network deployments.
• Should have 6 years of experience in Network operational support/management roles.
• Excellent knowledge and troubleshooting skills on SD WAN, LAN segmentation, Cisco Switches, Cisco Wireless Access Points, Cisco Wireless Controllers, Cisco Routers, Firewalls Fortinet, Checkpoint, Cisco, Riverbed Bandwidth Optimizers, F5 Load Balancers, NetScaler and BlueCoat.
• Maintain design of LAN/WAN including protocols and routing.
• Identify potential failures and recommend solution.
• Update knowledge base with known errors.
• Excellent Written and Verbal Communication.
• Flexible to work in 24x7 shifts.
• Good understanding of procedures, application and concepts within own subject area and understanding them in the context of the business.