Responsibilities (include but are not limited to):

· Work with the Manufacturing department as a production area Quality Assurance representative

· Coordinate and facilitate Quality Assurance related production and production related activities

· Ensure timely issuance of production records, procedures and labels

· Ensure timely assessment and closure of discrepancies, Deviations and Change Controls

· Review batch-related documentation, and ensure resolution of issues to release product

· Communicate lot disposition pending issues to Management

· Ensure approval and timely delivery of Final Product

· Ensure that products are manufactured in compliance with regulatory and GMP guidelines

· Review and approve Manufacturing and Validation documents for Regulatory and Kite compliance

· Review and approve Manufacturing Production Records

· Compile and verify all batch related documents into a Final Product lot disposition package

· Provide Quality Assurance support resolving material, in-process product, final product, environmental, facility and equipment manufacturing issues

· Review and disposition disposable raw materials and components for GMP use

· Review equipment and facility technical and investigation reports

· Review and approve proposed changes to systems, procedures, methods, and submissions to regulatory agencies

· Gather metric information for use in continuous improvement of areas of responsibility. Report to management as needed.

· Perform other duties as required

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• No Experience Needed, Full training/ on the job guidance will be provided
• Able to start immediately

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Quality Assurance Manager

Key Responsibilities
• Serve as the main Quality point of contact related to suppliers
• Manage External site to contractual obligations relative to Quality Agreement, specifications, quality, safety and regulatory requirements
• Review and/or approve as necessary, completed production batch records, deviations, master batch records, change controls, audits/inspections responses
• Understand and interpret applicable GMP Regulations pertaining to manufacturing and testing activities at External site
• Provide quality oversight of the manufacturing, testing, and release of materials at External site
• Author and drive actionable site inspection readiness plans
• Author inspection playbooks with External site on key risks/gaps and drive readiness efforts with External site
• Representation at product-specific Regulatory Inspections and/or during Notified Body audits of External site, as applicable or required
• Identify and mitigate risk at the External site
• Monitor and communicate site performances in means of quality metrics through actionable periodic reviews and operating reviews
• Escalate risks or roadblocks to management
• Drive timely decision making using principles
• Drive continuous improvements

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• Min 5 years relevant experience in a related industry preferred
• Able to start immediately preferred

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: QA/ QO)

Thank You.

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: QA Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

[1 year contract, renewable]

As a Software Quality Engineer, you'll enhance software delivery and quality by designing, implementing, and maintaining comprehensive testing coverage from development through production. You'll focus on creating automated test scripts rather than just finding bugs, helping developers improve their own processes. Your role involves working in agile teams, tackling a variety of technical challenges, and performing exploratory testing to identify risks. This position offers rapid career growth and access to cutting-edge technologies and extensive infrastructure.

Responsibilities:

· Build advanced automated test suites to exercise our world-class applications.

· Work with the development and other engineering teams to automate testing, applying risk-based strategy.

· Conduct static and dynamic application security testing (SAST) and (DAST).

· Conduct load and performance testing to identify application bottleneck.

· Conduct research on emerging technologies related to application quality.

· Analyse and decompose complicated software systems and design a strategy to test these systems.

· Work with Product Owner and Business Analyst to craft out user story acceptance criteria.

· Conduct application performance and security testing to ensure we have a robust and secured system in place.

· Implement and maintain regression test suite in QA nightly build.

· Actively refine smoke test suite in Development CI environment.

· Lead system integration testing with other system owners.

· Manage user acceptance testing/alpha testing and defect life cycle.

· Drive continuous improvement in Agile testing practices and tools.

· Ability to interpret the application source code and experience of using different cloud providers services such as AWS, AZURE and GCP

Qualifications:

· Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Min 5 years’ experience in one or more of the followings: Application exploratory testing and regression test automation

o Application performance testing

o Application security testing

o Strong analytical skills.

· Meticulous attention to details.

· Good interpersonal skills such as tactfulness.

· Good presentation and listening skills.

· Experience in agile development environment will be an added advantage.

· Experience with open-source automated testing framework like Playwright, Cypress, Robot Framework, Cucumber, Appium, Selenium or enterprise level testing tools (Tricentis QTest/TOSCA, Micro Focus UFT or Micro Focus ALM/Quality Center) will be an added advantage.

· Experience with open-source performance testing tools like K6, JMeter, Locust or enterprise level testing tools (Micro Focus LoadRunner) will be an added advantage.

· Experience with open-source security testing tools like ZAP, Burp Suite, SQL Map, Clair, etc or enterprise level security tools (Mirco Focus Fortify On Demand, Prisma Cloud, Veracode, Nessus or CheckMarx) will be an added advantage.

· Experience to setup the pipeline with CICD tools, such as GitLab, Bamboo and etc.

· Certified Software Testing Professional and/or Certified Software Quality Analyst and/or CREST/OSCP certification will be an added advantage.

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Primary Responsibilities:

• Ensure accurate transmission of alarms and statuses between the frontend interface and the monitoring system by verifying log data from both sources.
• Act as a liaison between the project team and field equipment, facilitating seamless integration and communication for the monitoring project.

Requirements:

• Shift Flexibility: Primarily night shifts with occasional day shifts as needed.
• Attention to Detail: Strong focus on reviewing and verifying log data to ensure accurate alarm and status tracking.
• Experience: Familiarity with log-based testing, particularly in system integration environments, is preferred.

Software Quality Assurance (Audit, QA)

Our Esteemed and Reputable Client is looking for an Software Quality Assurance (Audit, QA)

Requirements:

• Solid experience in handling Projects Audit/ Quality Assurance and Checks.
• Strong experience in handling Quality Assurance and Software Governance.
• Good track record handling Quality Assurance Projects and Timeline.
• Involved in Projects Audit and Checks.
• Sound knowledge in handling quality improvement practices and processes on Projects.
• Experience in handling IT Quality Assurance, Process Improvement, Software Testing and Methodology.
• Minimum 3- 5 years of Software Quality Assurance and Audit Checks on Projects.
• Experience in performing Audit Checks on Projects
• Involved in handling Projects Quality Audit.
• Responsible for Project Audit/ Quality Management System procedures and processes.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Quality Assurance Team

Reports to: Senior QA Engineer

Function: Global QA

Work Location/Site: Singapore / GHQ

Internship Duration: Any 3 months between January to May 2025

Role Overview

The QA intern will support the quality and various project teams with validation needs in MasterControl, our cloud-based Quality Management System (QMS) for HSO.

Duties and Responsibilities

• Assist to perform validation duties to ensure software validation project and corresponding deliverables adhere to current regulations and quality standards
• Actively contribute towards continuous improvement of the quality team by suggesting new ideas and promoting innovative culture through improving and optimizing analysis of quality data and process workflows
• Provide support to record management and archiving activities
• Support post-migration and improvement activity works for the QMS
• Assist with QMS Modules improvement and maintenance activities
• Participate in team activities and initiatives related to QMS and regulatory requirements
• Other duties as assigned

Requirements

Experience

• N/A

Skills/Accreditations

• Microsoft office skills essential. Candidates with Excel Macro skills preferred
• Some Quality system knowledge will be advantageous
• Self-awareness and Good work ethics
• Strong communication and interpersonal skill

Academic Qualifications

• Pursuing Diploma or Degree Preferably in Science or Engineering

Travel requirements

• N/A

By submitting your application, you agree that your personal data will be collected, disclosed, and retained by HOYA Group for assessing suitability for employment and verification purposes.

We regret to inform you that due to the number of applications received, only shortlisted applicants will be notified. Thank you for your kind understanding.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Description:

• Updating and maintaining records and documentation for the ISO 9001, ISO 14001, and ISO 13485 systems.
• Manage internal and external audit system as well corrective action reporting system.
• Monitor and review supplier performance to address non-conforming materials.
• Work closely with production team on internal process and quality issue.
• Coordinate the review of quality procedures and manage the inspection standard on incoming, in process and outgoing inspections.
• Handling customer complaints and ensure all corrective actions to customers are implemented and documented.
• Plan regular internal inspections in accordance with relevant procedures.
• Perform another related task as assigned.

Job Requirement:

• Good interpersonal and communication skill
• With working experiences from tooling fabrication or plastics injection molding industry preferred
• Good knowledge of ISO 9001, ISO 14001, ISO 13485 and ISO 22301 quality system
• Knowledge in supplier management
• Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

The Senior Manager, Regional Creative & Brand Assurance (CBA) plays a pivotal role in working together with the Partners, Business Unit Head, and CBA team to achieve the goals and objectives set by the Company. He/she will manage the creative strategy and direction across SEA and Greater China in his/her Business Unit, provide strong leadership support to the team, and continue to establish excellent relationships with our clients.

Main Responsibilities

Brand Assurance and Creative

• Lead and provide strategic direction the Business Unit’s CBA team across SEA and Greater China.
• Establish strong working relationships with licensee to facilitate Brand Assurance & Creative requests, issues, and needs.
• Oversee all aspects of BA & Creative jobs, and provide guidance/mentorship to team members
• Fulfill BA & Creative functions for Principals/IPs as per brand guidelines.
• Conduct research and development of branding/style guide/creative projects OR work on creative brief to design agency etc.

Brand Assurance/Licensee Management and Compliance (with regards to use of style guide & product development)

• Ensures high compliance achieve by licensees at each stage (concept, pre-prod to final).
• Ensures a timely communication flow of information from Principals to licensee and vice versa.
• Conduct BA workshops and technical assistance to licensees.
• Ensure that licensees optimize the use of each style guide/trend program.
• Work with sales and ensure that licensees optimize effort to develop/launch product per contract.

Product Development

• Possess sound knowledge of product development process, new technology, seasons, trends & colors.
• Arrange initial product development meetings with key licensees to discuss creative and innovative branding ideas/styling/applications where appropriate.

Creative Projects

• Support sales personnel with appropriate product/premium concept for pitching purpose.
• Supports licensees with product concepts or final artwork.
• Conceptualize impactful Advertising & Marketing materials to support product launch, marketing or retail promotions, store openings etc.

Others

• Manage and disseminate all creative materials.
• Materials include style guides, trend programs, other creative materials, etc.
• Maintenance & security of inventory, crosscheck controls & record keeping on dissemination of proprietary materials.
• Ensure style guide program management – communicate with licensees regarding new and/or discontinued materials.

Job Requirements

• A University Degree/Diploma, preferably design or arts.
• At least 8 years of relevant experience in licensing/advertising agency or related design field, with more than 3 years in a leadership position. Background and understanding of fashion/lifestyle categories and entertainment characters/brands preferred.
• Strong experience with graphics packages (Adobe Photoshop, Illustrator, InDesign, etc.).
• Knowledge of After Effect & 3D Program are advantages.
• Able to communicate/write fluently in English.
• Strong leadership capabilities, able to provide support and guidance to team across the region.
• Pro-active, independent, meticulous, and strong time management/organization skills.

The Opportunity:

Our Assurance group is one of the most trusted, respected and influential organisations in the industry. As part of our team, you will provide peace of mind to clients by using your skills and experience to give companies, investors and regulators confidence in the validity of financial statements and business-critical information or processes. Groups (or, as we call them, sub-service lines) within Assurance include External Audit, Climate Change and Sustainability Services, Financial Accounting Advisory Services and Fraud Investigation & Dispute Services.

We’re looking for a Financial Accounting Advisory Services (FAAS) Associate to join our team.

You’ll assist our clients to address the accounting and finance operational and reporting challenges facing their business. You’ll be part of a team that provides insight and services that accelerate analytics, decision-making and innovation to build a stronger and more efficient finance function.

You will join our nearly 70,000 assurance professionals and experience ongoing professional development through diverse experiences, world-class learning and individually tailored coaching. That’s how we develop outstanding leaders who team to deliver on our promises to all of our stakeholders, and in so doing, play a critical role in building a better working world for our people, for our clients and for our communities. Sound interesting? Well, this is just the beginning. Because whenever you join, however long you stay, the exceptional EY experience lasts a lifetime.

Your Key Responsibilities:

In your role as a FAAS Professional, you will provide finance transformation consultancy and accounting and finance advisory services encompassing:

Finance Applications, Processes and Analytics

• Support on enhancing and testing accounting processes and controls, including SOX controls
• Internal controls remediation
• Participate in finance business process reviews to identify areas of improvement in clients’ finance applications and processes
• Develop, configure, and test developed third party finance applications for clients
• Conduct data analysis and provide recommendations to improve finance processes and systems
• Assist with project management activities for large scale finance transformation projects

Enhanced Corporate Reporting and Accounting

• Provide accounting support/assistance for areas such as: Adoption of new standards, restructuring of entities, development of accounting and reporting policies, GAAP conversions

Transaction accounting, IPO and Capital Markets

• Accounting support/ assistance for due diligence transactions, such as preparation of carve out financial statements
• Post-acquisition support such as Day 1 & Day 2 transaction support, consistency in accounting policies
• IPO readiness such as preparation of pro-forma financial statements, process and control gap assessment

Skills and Attributes for Success:

• Pursuing a Degree in Accounting or equivalent.
• Enthusiasm in drawing insights and trends from financial data, combining data analytics with accounting and financial reporting skills.
• Strong interest in utilizing technology to drive process improvements in finance and accounting.
• Good verbal and written communication.
• Demonstrated proficiency in utilizing financial systems and software.
• Demonstrated strong organizational and project management skill.

What we offer:

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

Responsibilities:

• Inspect incoming raw/packaging materials and product labels to ensure they meet standard specifications.
• Conduct checks on the production line for compliance with Good Manufacturing Practices (GMP), including in-process items and finished products, ensuring adherence to Standard Operating Procedures (SOP) and product specifications.
• Generate weekly QC reports.
• Work closely with the production team to ensure quality products are produced.
• Ensure products adhere to and comply with food regulations.
• Report non-conformances to superiors or the person-in-charge for investigation and corrective action.
• Verify product labels before printing.
• Support in managing retention samples.
• Assist in pest control management.
• Maintain documentation and records.
• Identify opportunities for process improvement and quality enhancement.
• Perform any other related duties as assigned by superiors.

Requirements:

• Minimum 1 year of relevant working experience preferred.
• Capable of working as part of a team as well as independently with minimal supervision.
• Possesses good interpersonal skills, analytical skills, self-motivation, and meticulous attention to detail.

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

• Assist in the development, management, and implementation of the SingEdExcel framework across schools.
• Support the Vice President in monitoring, reviewing, and evaluating the effectiveness of the framework and the knowledge repository.
• Maintain documentation of all policies and procedures, ensuring they are up-to-date and accessible in the knowledge repository.
• Assist in organising professional learning sessions for school leaders on the SingEdExcel framework and SMM Knowledge Repository.
• Coordinate and manage documentation and evidence gathering for the EduTrust certification renewal exercise.
• Assist in the development and implementation of data protection policies and procedures.
• Support in conducting data protection risk assessments and audits across all schools.
• Monitor compliance with data protection laws and regulations and report findings to the Group DPO.
• Coordinate data protection training and awareness programmes for staff.
• Maintain comprehensive records of data processing activities and assist in the preparation of reports on data protection compliance.
• Other adhoc duties as assigned

Job Specification

• Recognised bachelor’s degree in Education, Business Administration, Quality Management, or a related field.
• Minimum of 3 years of experience in quality assurance, compliance management, or a related field.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Job Summary:

We are looking for a highly skilled Senior Supplier Quality Engineer to lead quality initiatives across our supplier base for thermal cooling solutions in the electronics and computing industry. The ideal candidate will be responsible for ensuring supplier quality and process reliability, working closely with suppliers to meet product excellence standards.

Key Responsibilities:

• Supplier Quality Monitoring & Improvement: Develop and implement supplier quality monitoring systems to ensure materials and components meet required quality standards. Identify and resolve non-conformance issues with suppliers.
• Supplier Process Optimization: Partner with suppliers to enhance their processes, improving yield and ensuring consistent quality of materials and components.
• Abnormal Quality Issue Management: Lead efforts to address and resolve abnormal quality issues with suppliers, implementing corrective and preventive actions.
• Supplier Audits & Compliance: Conduct supplier audits to assess quality systems, process capabilities, and compliance with industry standards. Drive continuous improvement initiatives based on audit findings.
• Supplier Development: Collaborate with suppliers to enhance their quality processes, ensuring alignment with company standards and customer expectations.
• Cross-Functional Collaboration: Coordinate with design, production, and procurement teams to ensure effective communication and alignment on supplier quality expectations.
• Continuous Improvement: Foster a culture of continuous improvement by working closely with suppliers to enhance their quality management systems and manufacturing processes.

Requirements:

• Bachelor's degree in the related field
• Proven experience in supplier quality engineering, particularly in manufacturing or electronics environments.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• In-depth knowledge of supplier quality management systems and industry standards.
• Strong analytical, problem-solving, and negotiation skills.
• Familiarity with supplier audits, corrective actions, and continuous improvement practices.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel extensively and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Descriptions:

• Perform accurate mechanical, physical and visual inspection of components
• Ensure that all parts and components have been tested and measured within specifications/tolerances.
• Initiate Non-Conformance reports as required.
• Communicate with supervisors, mold technicians and other staff to resolve inspection questions.
• Accurately document the results of the inspections and testing on the computer in various programs
• Read and interpret specifications and drawings
• Report any product defects immediately to the technician
• Support the implementation of ISO registration, compliance and audits
• Maintain calibration, first article, internal auditing and training programs
• Direct customer and supplier support for quality matters verification if required

Job Requirements:

• Minimum ITE in engineering or other relevant fields with 3 years of experience
• With relevant Quality Control experience in Plastics Mold preferred
• Practical understanding of precision tooling
• Ability to use basic hand measurement tools (calipers, micrometers, gauge pins, etc.) required
• Experience with visual and touch probe CMMs (Zeiss, Nikon) and Optical comparator desired
• Experience with metrology, GD&T, technical drawing reading
• Fluency in ISO program management and implementation is an asset
• General computer proficiency
• Able to perform Over time
• Able to perform rotating shift

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)