Quality Assurance (QA)

• Working days: 5 / 6 days alternate
• Working Hours: 830am-530pm
• Salary: $2000 - $2400
• Working Location : Bedok

Job responsibilities

• Conduct detailed inspections of finished products to identify defects, non-conformities, and deviations from quality standards.
• Support quality in handling defective found during the production
• Collaborate with the quality control team to resolve material quality issues and determine disposition (accept, reject, or rework)
• Collaborate with the production, quality teams to identify root causes of defects and non-conformities
• Perform FA report, and propose process improvements.
• able to use calliper, OGP , Keyence, Drop gauge , micrometre, pin gauge
• able to interpret 2D drawings
• ⁠collect parts for 2 hourly to visual inspection
• ⁠key in data

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Oil & Gas Manufacturing company

• Working day: 5 days
• Location: Tuas

Job Scope:

• Oversee First Article Submissions and develop quality plans. Conduct audits (QMS, Process, HSE) and assess supplier capability.
• Monitor supplier quality, perform audits, and drive closure of findings to reduce Cost of Poor Quality (COPQ).
• Identify improvement opportunities to enhance supplier capabilities and reduce lead times.
• Propose improvements for financial and operational efficiencies in supplier processes.
• Build strong relationships with internal stakeholders to resolve process issues and promote quality standards.
• Develop and manage Quality Control Plans (QCP) with customers, ensuring all requirements are met.
• Manage customer and third-party inspections for product quality compliance.

Requirements:

• Degree in Mechanical Engineering or any Technical/Engineering course
• At least 3-5 years of working on the same industry, preferably experience in Oil & Gas industry

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Responsibilities:

· Develop and implement quality management systems and processes
· Conduct audits and inspections to ensure compliance with quality standards
· Identify and address quality issues, implementing corrective actions
· Collaborate with cross-functional teams to drive continuous improvement
· Analyze data and metrics to measure quality performance
· Develop and deliver training programs to enhance quality awareness
· Stay up-to-date with industry developments and best practices

Requirements:

· Higher NITEC / NITEC in Mechanical Technology or equivalent

· Minimum 3 years' experience in NDT works

· Possess NDT Level 2 Certificate in MPT Those with NDT Level 2 Certificate in UT and PT or welding experience will have an added advantage

Queenie Chua

R24125459

Client Summary

The company is a global corporation with significant international presence, including production sites, R&D centers, and sales offices worldwide. They manufacture high-performance synthetic rubber products, offering a broad portfolio of materials such as SBR, NBR, EPDM, BR, and TPE. These products are widely used across industries such as automotive, construction, electronics, industrial manufacturing, and consumer goods.

The Job

• Assist the Assistant / QA Manager in driving the improvement of the Quality Management System (QMS) across all departments to ensure full compliance with IATF 16949 standards.
• Conduct specification reviews, CSR assessments, and gap analysis.
• Oversee daily production batch release activities; familiarity with SAP is a plus.
• Lead efforts to improve CPK and conduct monthly reviews of MRB and freeze inventory.
• Manage documentation and reports related to IATF Core Tools (PPAP, APQP).
• Issue, review, and verify Corrective and Preventive Actions (CAPA) for internal and external quality issues (raw materials, finished products, shipment, and logistics).
• Generate, review, and update quality-related procedures and instructions.
• Participate in Management Reviews and report at monthly quality meetings.
• Contribute to the revision of FMEA and Control Plans.
• Assist the QA Manager in handling customer complaints and investigations.
• Support the QA Manager during plant audits (external, internal, customer, and supplier audits).
• Perform other tasks as delegated by the Assistant / QA Manager.

The Talent

• Degree in Engineering, Chemistry, Science, or a related field.
• 3-5 years of experience in a Quality Assurance department.
• Strong knowledge and understanding of ISO 9001, IATF 16949, or similar quality systems, with experience in managing audits.
• Good communication skills and ability to work collaboratively in a team and individually.

Other information

• Location: Jurong Island, company bus provided at Jurong East.
• Transport Allowance
• Site allowance

Next Steps:

• Interested applicants, please send your resume to [email protected] with your current and expected salary. Only shortlisted candidates will be contacted.

We seek an Automation Quality Assurance Engineer skilled in software testing to play a key role in the product development process and deliver high-quality software solutions that meet the clients' needs.

• Competitive remuneration package (up to $4,500 + AWS + VB).
• Hybrid working arrangement.
• Gain valuable skills in software testing methodologies with opportunities for professional development and career progression in QA.

Responsibilities:

• Design, develop, and sustain automation frameworks for testing software and hardware, process automation, and data integration.
• Develop comprehensive test cases and plans while maintaining scalable automation frameworks to support continuous integration and delivery.
• Run automated tests, evaluate results, and identify defects, performance concerns, and areas for enhancement.
• Integrate automated tests within CI/CD pipelines.
• Identify opportunities for automation to boost efficiency and minimize manual efforts.
• Document automation workflows, test cases, and outcomes for future reference and audit purposes.
• Assist with manual testing as required and handle other assigned responsibilities.

Job Requirements:

• Singaporean only.
• Minimum of 3 years experience in Software testing (Web-based application).
• Strong proficiency in automation development using Python / Selenium / Appium.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience in creating clear and concise test plans and test cases.
• Prior hands-on experience with API automation, test automation, and integrating it into CI/CD pipelines.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Inspector II you are tasked to assist in customer complaint investigation process and provide quality oversight for the site to ensure that devices manufactured are compliant to ISO 13485, MDSAP, EU MDR, Alcon Standards and Policies, and regulatory requirement.

Responsibilities

• Support complaint investigation via following up on required actions (DHR/logbook/PM review, etc).•Identify improvement opportunities and lead/support the implementation activities to improve performance and efficiency.•Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.•Complete Complaint investigation report and maintenance of complaint master list, complaint samples, SOP revision and periodic review.•Perform Site's investigation (NCR, SAR, OOS, Complaints, etc) and Site's WI/SOP/Gap Assessment/Impact Assessment.•Work with cross-functional teams to resolve operational quality issues.•Performs any other duties as assigned by Supervisor according to business needs.

What You'll Bring to Alcon

• Min GCE N/O Levels/ Nitec in any engineering field
• Preperably 1-2 years of experience in quality inspection in manufacturing sector
• Able to commit to rotating day and overnight shift/ day shift

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

-Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality

-In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations

n Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

Responsibilities:

• Inspect incoming raw/packaging materials and product labels to ensure they meet standard specifications.
• Conduct checks on the production line for compliance with Good Manufacturing Practices (GMP), including in-process items and finished products, ensuring adherence to Standard Operating Procedures (SOP) and product specifications.
• Generate weekly QC reports.
• Work closely with the production team to ensure quality products are produced.
• Ensure products adhere to and comply with food regulations.
• Report non-conformances to superiors or the person-in-charge for investigation and corrective action.
• Verify product labels before printing.
• Support in managing retention samples.
• Assist in pest control management.
• Maintain documentation and records.
• Identify opportunities for process improvement and quality enhancement.
• Perform any other related duties as assigned by superiors.

Requirements:

• Minimum 1 year of relevant working experience preferred.
• Capable of working as part of a team as well as independently with minimal supervision.
• Possesses good interpersonal skills, analytical skills, self-motivation, and meticulous attention to detail.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Summary:

The Compliance and Quality Assurance Specialist will play a critical role in preparing, organizing, and managing documentation and evidence for SSG audits. This position will also be responsible for planning and coordinating new training programs, ensuring that our processes and materials meet regulatory standards to maintain our status as an SSG-approved training provider.

Key Responsibilities:

Audit Preparation: Organize and prepare necessary documents and evidence for upcoming SSG audits, ensuring readiness and compliance.

Documentation Management: Maintain accurate, up-to-date records of all training programs, student outcomes, and relevant compliance documents.

Policy Compliance: Monitor and ensure adherence to SSG guidelines, including regularly reviewing and updating internal policies.

Process Improvement: Identify and implement improvements to compliance and quality assurance processes for smoother audit preparation and internal controls.

Stakeholder Coordination: Collaborate with internal teams and stakeholders to ensure all aspects of our training programs meet regulatory standards.

Requirements:

Experience: Minimum of 1 years in compliance, quality assurance, or related roles; experience in the training or education industry is a plus.

Knowledge of SSG Compliance: Familiarity with SSG guidelines and audit requirements is preferred.

Education: Diploma or degree in Business Administration, Compliance, Quality Management, or a related field.

Skills: Strong organizational and documentation skills, excellent attention to detail, and proficiency in managing records and evidence for audits.

Communication: Ability to work with cross-functional teams and communicate compliance requirements effectively.

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Healthcare Quality & Regulatory Compliance Specialist (Hybrid) AMEA

Opportunity:

Play a critical role in driving compliance and quality programs for Healthcare Transportation and facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Your Contribution:

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Provide inputs to support the design & implementation of robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead and support various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead regular audit programs / random checks to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and support in issue resolution via conducting root cause analysis (depot).

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead and support validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

What we look for in you!

1. Hold local pharmacist license (and may be required to hold licenses and permits on behalf of the company)

2. Have three (3) to five (5) years of relevant experience in pharmaceutical or healthcare industry in a quality related role

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local institute.

Your competencies:

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Location: Chinatown

Woirking hours: 8.30am to 5.30pm (Mon-Fri)

Job Scope

• Assist in the development, management, and implementation of the framework across schools.
• Support the Vice President in monitoring, reviewing, and evaluating the effectiveness of the framework and the knowledge repository.
• Coordinate with school leaders and staff to ensure effective adoption and implementation of standardised policies and procedures.
• Maintain documentation of all policies and procedures, ensuring they are up-to-date and accessible in the knowledge repository.
• Support the Vice President in serving as an internal assessor for schools preparing for EduTrust certification.
• Assist in reviewing EduTrust-related documents.
• Assist in the development and implementation of data protection policies and procedures.
• Support in conducting data protection risk assessments and audits across all schools.
• Coordinate data protection training and awareness programmes for staff.
• Other ad hoc duties assigned

Job Requirements

• Bachelor’s degree in Education, Business Administration, Quality Management, or a related field.

• Minimum of 3 years of experience in quality assurance, compliance management, or a related field.

• Minimum of 1 year of experience with data protection and privacy laws, and their implementation in organisational processes.

• Knowledge of quality/compliance management systems and frameworks (e.g., EduTrust, ISO 21001) is essential.

• Any additional certifications in quality management or project management will be beneficial.

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.