Job Responsibility

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence.

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Job Responsibilities:

1. Assist management in reviewing internal control processes and implementation for improvements per group policies and procedures adherence.

2. Assist management in establishing new processes and safeguards in driving best practices and system implementation when required.

3. Prepare documents for internal audit per Head Office requirement and support the process such as providing samples (signed contracts, full set of whole cycle operation documents adhering to internal controls).

4. Liaise with other departments/subsidiaries as well as the Head Office to provide financial figures required in various standard and ad hoc reports.

5. Review and assist in managing all accounting aspects, and preparation of month-end financial reports.

6. Perform other job-related duties as assigned.

Job Requirement:

1. At least 3 years of related working experience, audit background is preferred but not compulsory.

2. Bachelor’s degree holder or above.

3. Candidate with Singapore CA, ACCA, or other qualification body member is preferred.

4. Excellent written and verbal communication skills.

5. Proficient in using Microsoft Office Apps, candidate with VBA skills is preferred.

At Shangri-La Singapore we are a heart-warming family. We share something powerful – our genuine care and respect for others. Our strength lies beyond our harmonious surroundings and hideaway locations. It lies in our core values that guide us to treat each and every one with honour, as kin, as family. We strive to be the preferred employer by providing great benefits, tranquil and sincere working environment, work-life balance and effort recognitions.

Set in 15 acres of lush greenery just minutes from the vibrant Orchard Road shopping belt, the Shangri-La Hotel, Singapore is a tranquil, sophisticated urban retreat whether travelling for business or leisure. It features 792 luxurious guestrooms and suites across three distinct wings, which include unique family-themed rooms, supported by a host of dedicated family-focused amenities.

We are looking for a Manager, ESG and Quality Improvement to join our team!

The Manager, ESG (Environmental, Social, and Governance) and Quality Improvement, is responsible for overseeing the development, implementation, and continuous improvement of Quality Improvement initiatives aimed at advancing our Key Strategies to Achieve Excellence.

The role will focus on sustainability, social responsibility, governance, and operational excellence. This includes overseeing the five key areas: Environment, Supply Chain, Employees, Stakeholder Relations, and Health & Safety. Additionally, the role is responsible for promoting initiatives related to 'embrace' and/or sanctuary, ensuring clear communication, and fostering a thorough understanding and execution of CSR practices

The role combines a commitment to both environmental and social responsibility while focusing on enhancing the quality of hotel services and operations. The ideal candidate will be a proactive leader capable of managing ESG programs, driving sustainable practices, and leading quality improvement projects to enhance guest satisfaction and operational efficiency.

Quality Improvement

• Continuously encourages reporting and recording of defects from all sources daily.
• Ensures all guest defects are resolved prior to or after guest had departed the hotel.
• Statistical analysis of data and reduce the recurrence of trend defects.
• Identify specific key drivers of satisfaction for hotel and communication of results throughout the hotel. Partners with regional office to provide leaders with Operational Reports and analysis to meet/exceed goals.
• Facilitates core project teams, ensures utilization of quality tools and reports out/updates hotel leaders and regional office the status of the team Responsible for training new and existing colleagues on the utilization and benefits of QI initiatives for continuously improving systems and processes.

Environment:

• Supervise and support the hotel’s Environmental Management System (EMS) through ISO14001 certification
• Work with the engineering team to ensure targets for water, energy and Co2e are met
• Implement activities and policies that promote environmental awareness

Supply Chain:

• Work with the purchasing team to ensure the supplier code of conduct and green purchasing guidelines are upheld
• Develop partnerships with local and eco-friendly suppliers
• Communicate any pertaining CSR related information at yearly supplier forums

Employees:

• Develop a meaningful CSR employee volunteerism calendar of events to meet hotel targets
• Work with HR to ensure Shangri-La standards for staff wellbeing, hotel facilities and fair working practices are maintained
• Support the group wide policy to include 2% of permanent headcount of People with Disabilities (PWD’s)

Stakeholder Relations

• Conduct conducive dialogue and share good CSR practices with local communities, NGO’s, civil society, local government and businesses
• Ensure expertise from the hotel is used towards making a positives impact on the local community
• Where needed, register as member of local associations and attend meetings to leverage CSR locally

Health and Safety

• Supervise and support Occupational Health & Safety certification (ISO 45001)
• Support Fire Life Safety standards across the hotel
• Work with HR to develop targeted health activities for employees

What you'll be doing

• Assist in the review and investigation of Hospital Incident Reports
• Provide secretarial support for meetings and committees, ensuring follow-up on related activities
• Coordinate and provide administrative support for monthly walkabouts
• Facilitate and organise the annual review of departmental policies
• Plan and manage the annual Quality & Safety Day
• Collaborate with external organisations on quality improvement initiatives, including organising conferences and cross-institutional projects
• Support project and poster submissions to external award platforms for recognition of quality efforts
• Coordinate surveys initiated by public service, analyse results, and drive follow-up improvement actions
• Undertake special projects or initiatives as assigned by the supervisor or Head of Department

What we're looking for

• Bachelor Degree level in Public Health or related studies
• 4 - 6 years of experience in similar setting, preferably in healthcare quality or clinical quality
• Proficient in facilitating quality improvement workshops and conducting training such as Root Cause Analysis, and Plan-Do-Study-Act

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

About Foodsta Kitchens

Headquartered in Singapore, Foodsta Kitchens is a digital first restaurant company with operations in Singapore and India. Foodsta owns and operates 6 fast casual brands in Singapore – Bloom Cafe Pte Ltd (Formerly known as Artisan Boulangerie Co.(ABC), Alt. Pizza, Green Monster, Chi Ji and Fat Mario, Now Pizza. We believe that people are the foundation of our business are committed to providing a fun work environment and scope for rapid career development.

Reports To: Director

Key Responsibilities:

Audit and Compliance

Food Quality and Operational Audits:

• Develop and implement comprehensive audit programs to assess food quality, safety, and compliance with internal and external standards / regulations (e.g., SFA, HACCP).
• Conduct regular, detailed audits across multiple locations, focusing on health and safety, preparation processes, and final product presentation.
• Perform mystery shopper assessments and operational reviews, particularly targeting high-volume quick service restaurants (QSR) and fast-food environments, to ensure consistent adherence to quality standards. In addition, work with external agencies.
• Analyze audit findings to identify non-compliance issues and develop corrective and continuous action plans.
• Use feedback mechanisms to identify areas for improvement, ensuring continuous enhancement in both product and service quality.

Training and Development

Quality and Compliance Training:

• Design and implement robust training programs focusing on food safety, quality control, and regulatory compliance.
• Train kitchen and service staff on food science principles, emphasizing best practices in hygiene, safety protocols, and quality assurance.

Halal and SFA Compliance:

• Liaise with certification bodies to ensure compliance with regulations across all products and processes.
• Enforce strict adherence to halal standards, from ingredient sourcing to final food preparation.

Innovation

Menu Development:

• Work with the culinary, operations and marketing teams to design innovative menu items, focusing on market trends, customer preferences, and seasonal ingredients.
• Leverage food science and nutrition expertise to create balanced, appealing, and nutritionally sound offerings.
• Research and analyze competitor products, particularly in fast food and QSR sectors, to introduce unique, high-quality pizza and other menu items.
• Conduct extensive testing and refinement of recipes, ensuring they meet taste, quality, and nutritional standards before integration into the menu.

Continuous Improvement

Process Optimization:

• Identify inefficiencies in operations, particularly in high-volume QSR and fast-food settings, and implement process improvements.
• Utilize data analytics and customer insights to refine processes, enhance service delivery.

Qualifications & Experience

Education:

• Diploma in Culinary Arts, Food Science, Hospitality Management, or Business Administration.
• Certifications in food safety (e.g., HACCP, ISO 22000, WSQ Level 3) strongly preferred.

Experience:

• Minimum 5 years of experience in audit, food innovation, quality management, or product development, specifically within QSRs, fast food chains, or multi-location F&B environments.
• Proven track record in menu development, applying food science and nutritional principles to create appealing, health-conscious offerings.
• Experience leading cross-functional teams and implementing quality systems across multiple outlets.
• Knowledge of pizza workflow is a plus point.

Skills & Competencies:

• Strong creative thinking with a deep understanding of food science, nutrition, and culinary innovation.
• In-depth knowledge of quality management systems, food safety standards, and operational processes in fast food and QSR settings.
• Excellent communication and leadership skills to collaborate across teams and locations.
• Analytical and problem-solving abilities to translate data and customer feedback into actionable improvements.
• Bilingual proficiency in English and Mandarin is advantageous.

Responsibilities:

Support the HOD in managing all aspects of risk involving market, liquidity, credit and operational risk.

Assure controls are operating effectively and assist in improving risk control management frameworks,policies,guidelines/procedures and communicating to stakeholders. Responsibilites include but not limited to the following:

• Primary reviewer in charge of new case review, and perform independent credit assessment of credit cases submitted by the front desk business department.
• Perform independent annual credit review of exisiting credit cases (ie. annual and ad-hoc credit reviews).
• Monitor the submission of annual credit reviews to ensure that all the existing credit files are reviewed promptly and timely.
• Perform the periodic risk reports (daily, monthly,quarterly,semi-annual and annual) in accordance with the Routine Report List, and complete credit risk related stress tests.
• Monitor and control market risk, such as FX exposure, bond price, interest fluctuation, hedge effectiveness and etc.
• Complete market risk analysis report,related stress test and provide recommendations to improve the branch's management of market risk.
• Assist in monitoring and control liquidity risk, complete the liquidity stress test and related analysis report.
• Manage the process for developing and enhancing risk policies and procedures, risk indicators, risk limits and approval authorities, to ensure they are in compliance with MAS regulations and policies of Head Office.
• Manage Head Office reporting and enquiries.
• Manage MAS enquiries, internal and external audit enquires.
• Perform ad-hoc duties assigned by the HOD and/or Management.

Requirements:

• Minimum 15 years of enterprise risk management experience predominantly in credit risk market risk, liquidity risk and operational risk in the banking industry.
• Possess a degree in finance with a Master degree in business administration preferred.
• Proficient in Bloomberg, Microsoft Excel or other statistical tools, having ability in programming like VBA, Python etc is preferred.
• Proficient in Mandarin as incumbent having ability to review documents both in English and Chineses is also to correspond with Chineses corporates aas well as colleagues in Head Office.
• Analytical and strong quantitative skilss with good eye for detail.
• Have initiative spirits to conquer the new and complex problems.
• Ability to work under pressure and a good team player and group leader.

• Apply assembly of mechanical machines.
• Carry out advanced spreadsheet functions.
• Carry out engineering simulation to verify design.
• Carry out inspection of protective coating.
• Carry out the process of mixing materials.
• Decide heat transfer loads for processing equipment.
• Define the measurements of the design and its allowance.
• Oversee manufacturing work for Workplace Safety and Health (WSH).
• Plan and build the industrial machine electrical system.
• Plan mechanism unit of machine.
• Use automation control for machines.
• Use laser machine technology.
• Use materials characterisation.
• Use measurement metrology in quality assurance.
• Use mechanical fixtures design.
• Use polymer materials technology.
• Use precision machining.
• Use root cause analysis.
• Use sensors and actuators in automation.
• Use vibration design and control for precision engineering.

Job Description & Responsibilities:

• Plan audits on clients
• Perform audits on clients
• Follow up on corrective actions to be taken by clients
• Review clients' corrective actions
• Finalize audit reports
• Prepare monthly report
• Conduct certification audits as an external auditor
• Ensure the computer information is kept updated

*On-the-job and external training shall be provided.

Job Description:

• Provide technical support, propose solutions, and project related queries for all Wired, Wireless network.
• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.
• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.
• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer
• · Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.
• · Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.
• · Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.
• · Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• · Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.
• · Create and maintain comprehensive documentation for all implemented networks.
• · Assist in preparation of proposals and solution presentations.
• · Able to lead a team of network engineers (size).
• · Attain key certifications for partnership with key vendors.

Educational Qualification:

• Years of IT Experience: 3 Years
• Work Experience: 3 Years

Key Responsibilities:

1. Network Device Monitoring:

• Regularly check network devices for connectivity and performance.
• Monitor the health status of all network devices to ensure they are functioning correctly.

2. Backup Management:

• Perform regular backups of network configurations and critical data.
• Ensure backup processes are reliable and data can be restored efficiently.

3. Configuration Management:

• Implement and document configuration changes to network devices.
• Maintain accurate records of all configuration changes.

4. Firewall Rule Review:

• Regularly review and update firewall rules to ensure network security.
• Collaborate with the security team to address any vulnerabilities.

5. Network Device Hardening:

• Apply best practices to harden network devices against potential threats.
• Ensure all devices are configured securely and comply with company policies.

6. Patch Management:

• Apply patches and updates to network devices to protect against vulnerabilities.
• Keep track of patch levels and ensure all devices are up-to-date.

Preferred Skills:

• Certifications such as CCNA, CCNP, or equivalent.
• Experience with network automation tools and scripting.

The Cybersecurity Engineer is responsible for designing, implementing, and maintaining security infrastructure to protect the organization’s IT systems and networks. This role involves analyzing, preventing, and mitigating security risks, conducting vulnerability assessments, and ensuring the overall security posture of the organization. The Cybersecurity Engineer will work closely with other IT teams to integrate security measures into the infrastructure, identify threats, and respond to incidents.

Key Responsibilities:

Security Infrastructure Design & Implementation:

• Design and implement secure network architectures, systems, and services.
• Build and configure security tools, such as firewalls, IDS/IPS, VPNs, endpoint protection, and SIEM systems.
• Integrate security solutions and ensure they are aligned with the organization's goals and policies.

Vulnerability Management:

• Conduct vulnerability assessments, penetration tests, and security audits to identify potential weaknesses in systems.
• Perform remediation activities by applying patches, hardening systems, and working with development teams to address security vulnerabilities.

Incident Response & Management:

• Respond to and investigate security incidents (e.g., data breaches, malware, DDoS attacks) to contain and mitigate damage.
• Collaborate with the incident response team to provide forensic analysis, determine the cause of incidents, and develop solutions to prevent recurrence.

Security Monitoring & Threat Intelligence:

• Continuously monitor and analyze security logs, alerts, and data from various security tools to detect and respond to potential threats.
• Leverage threat intelligence feeds and analysis to stay updated on emerging security threats and trends.
• Implement proactive security measures, including vulnerability scanning and intrusion detection.

Policy Development & Compliance:

• Develop, implement, and enforce security policies, procedures, and best practices across the organization.
• Ensure compliance with relevant regulatory standards, including IM8, CCoP 2.0, and other industry-specific frameworks.
• Conduct regular security assessments and audits to ensure adherence to security policies and standards.

Security Tools & Automation:

• Manage and optimize security tools such as SIEM, antivirus/anti-malware, firewalls, encryption, and endpoint protection systems.
• Automate repetitive security tasks and processes to increase efficiency and reduce manual intervention.

Collaboration & Training:

• Work closely with development, operations, and network teams to implement security into the SDLC (Software Development Lifecycle) and IT operations.
• Provide cybersecurity awareness training and guidance to employees to promote safe practices across the organization.

Documentation & Reporting:

• Maintain detailed documentation for all security systems, incidents, and actions taken.
• Generate regular reports on the status of the organization’s security posture, incidents, and risk assessments for management.

Qualifications & Requirements:

• Qualifications: Bachelor's degree in Cybersecurity, IT, Computer Science, or equivalent experience.
• Experience: Minimum of 2 years in cybersecurity or security engineering, with expertise in designing, implementing, and managing security solutions (e.g., firewalls, VPNs, IDS/IPS, endpoint protection).
• Technical Skills:Proficiency in vulnerability management, penetration testing, and security tools (SIEM, IDS/IPS, antivirus).
  Strong understanding of network protocols (TCP/IP), firewalls, VPNs, proxies, and related technologies.
  Familiarity with compliance standards (e.g., IM8, CCoP 2.0, NIST).
  Scripting expertise (Python, PowerShell, or Bash) for task automation and incident response.
  Hands-on experience with penetration testing tools (e.g., Kali Linux, Metasploit, Burp Suite, Nmap).
• Certifications (preferred): Certified Ethical Hacker (CEH), CompTIA Security+, or CySA+.
• Soft Skills: Strong analytical, troubleshooting, and communication skills (both written and verbal).
• Additional Knowledge: Security operations, incident response, and disaster recovery processes.

JD:
o Good programming skills in Python
o Must possess experience or interest in training and deploying machine learning models end to end.
o Good understanding of basic statistics and deep learning techniques
o Prior experience in data integration, profiling, validation and cleansing
o Proficiency with SQL
· Software delivery
o Strong understanding of agile methodologies
o Strong understanding of CI/CD
o Strong understanding of test-driven development
o Comfortable using version control and enterprise task management tools.
· Data Engineering
· Experience in deploying TensorFlow and PyTorch into production
o Building data pipelines and architecture
o Should have extensive experience with relational and NO-SQL databases
o Should have proficiency in handling both structured and unstructured data sources
o Strong experience deploying applications to cloud platforms like Azure, AWS
o Interest in building efficient batch and streaming data engineering pipelines
o Exposure to distributed data processing platforms like Spark?.Data Engineer

Position Overview:

We are seeking an Integration Specialist with a strong background in communication protocols, programming expertise, and system troubleshooting to join our dynamic team. The ideal candidate will ensure seamless system integration, troubleshoot technical issues efficiently, and contribute to our mission of delivering robust integration solutions.

Key Responsibilities:

Protocol Expertise:

· Implement and manage integrations using protocols like HTTP, HTTPS, FTP, SFTP, and AS2.

· Configure secure and reliable data transfers between systems.

Programming and Development:

· Develop and maintain integration solutions using Java.

· Debug and optimize existing code to enhance system performance.

Linux Operations:

· Utilize Linux operating system for application deployment and management.

· Execute Linux commands to monitor, troubleshoot, and resolve system issues

Troubleshooting and Support:

· Diagnose and resolve integration-related issues promptly.

· Collaborate with cross-functional teams to ensure minimal downtime.

Documentation:

· Create and maintain comprehensive documentation for system integrations, configurations, and troubleshooting guides.

Required Qualifications:

· Strong understanding of integration protocols: HTTP/HTTPS, FTP/SFTP, AS2, etc.

· Proficient programming skills in Java.

· Hands-on experience with the Linux operating system and command-line tools.

· Proven ability to troubleshoot and resolve complex integration issues effectively.

· Excellent problem-solving and analytical skills.

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Key Responsibilities:

• Support the implementation and contribute to the continuous improvement of Safety, Quality, Environment, and Health Management Systems, including but not limited to SS506 Part 3, ISO 9001, ISO 14001, OHSAS 18001, and IATF 16949.
• Act responsibly to ensure the safety of oneself and others who may be affected by actions or omissions at work, as per legal obligations.
• Assist management in mitigating Major Accident Hazards to As Low As Reasonably Practicable (ALARP) levels and escalate concerns when necessary.
• Ensure adherence to Customer Specific Requirements (CSR) in all operational processes.

Requirements:

• Strong knowledge in chemical engineering, mechanical engineering, and/or polymer science.
• Experience in process safety management, quantitative risk assessments (e.g., Layer of Protection Analysis - LOPA), or safety case preparation is an advantage.
• SCEM certification or possession of a Steam Engineer/Boiler Attendant certificate is preferred.
• Working knowledge of ISO9001, ISO14001, SS506-Part 3 standards, cost control practices, and relevant regulations.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Role:Ansible Engineer

JD:

We are looking for an experienced Ansible Automation Engineer to design, implement, and maintain automation solutions that streamline our operations and enhance efficiency. The ideal candidate will possess strong expertise in Ansible, YAML, Python, Angular JS and PowerShell scripting, as well as the ability to work with a wide range of technologies, including Linux, Windows, Core OS, RHEL and platforms such as Red Hat OpenShift Container Platform (OCP), AWS and Azure.

Responsibilities:
• Collaborate with cross-functional teams to understand business requirements and design automation solutions using Ansible and other relevant technologies.
• Develop and maintain a strategic plan for centralising Ansible automation.
• OCP Application Onboarding (Namespace Creation, Quota Assignment, RBAC role assignment)
• Develop and test digital forms (using AngularJS) to record the user requirement as per the specification document
• JSON Handling: Proficiently work with JSON data for configuration management and data interchange.
• Develop Ansible playbook for onboarding the application onto OCP and perform Unit testing
• Setup DevOps pipeline to build and release the Ansible playbooks
• Create, test, and maintain Ansible playbooks and roles that automate various tasks, configurations, and deployments.
• Maintain and update the centralised inventory of managed hosts and resources.
• Security and Compliance: Implement security best practices for Ansible, including credential and secrets management. Ensure that automation complies with organizational security and compliance policies.
• Scripting: Develop and maintain Python and PowerShell scripts to automate various tasks and processes.
• API Integration: Work with APIs to facilitate communication between different systems and platforms.
• Technology Stack Management: Manage and support automation solutions across a diverse technology stack, including Linux, Windows, RHEL, Core OS, OCP and good to have AWS.
• Source Control: Use GitLab, Bitbucket, Jenkins, and JIRA for version control and collaborate with development teams to ensure code integrity.
• Cloud Infrastructure Management: Work with Terraform and CloudFormation to efficiently provision and manage cloud resources.
• IT Service Management: Integrate automation solutions with ITSM tools to improve service delivery and incident management.

Requirements:
• Bachelor's degree in computer science, information technology, or a related field
• 3 to 5 years of Proven experience as an Ansible Automation Engineer or similar role.
• Strong scripting skills in Python, YAML, Angular JS and PowerShell and good to have Java and Groovy
• Excellent communication skills
• Familiarity with API calls and JSON.
• Proficiency in working with Linux , Windows, Core OS, and RHEL environments.
• Knowledge of cloud platforms such as OCP and AWS
• Experience with Red Hat Ansible Automation Platform and Ansible is a must
• Familiarity with GitLab, Bitbucket, Jenkins and JIRA for version control.
• Experience with integration of automation solutions into ITSM tools
• Solid understanding of automation principles and practices Docker and Kubernetes for containerisation and orchestration
• Fair knowledge in networking, including VLANs, firewalls, and ports

WHO WE ARE:

PALO IT is a global innovation and software development company dedicated to helping organizations craft tech as a force for good. We work with clients to rapidly launch products and services, create new business models, and prepare leadership and culture for the future. We are a community of innovators, designers and technologists across 16 offices and five continents (France, Hong Kong, Singapore, Thailand, Australia, Mexico, Colombia, Spain and the United States).

We're committed to helping businesses transform to better our world. We're proud to be a World Economic Forum (WEF) New Champion, and a B Corp-certified company in Singapore, Hong Kong and Mexico, currently working towards certification across all other locations.

YOUR ROLE:

The Senior DevOps Engineer will maintain and support Cloud Infrastructure and apply DevOps practices and solutions. The person will also implement Cloud-related and DevOps technologies such as AWS/Azure/Kubernetes. Senior DevOps Engineer will be expected to conduct workshops with client to identify their challenges, come up with transformation roadmap and deliver technical solutions while coaching delivery teams on DevOps best practices.

YOUR RESPONSIBILITIES:

• Provide customers with reliable solutions
• Configure, maintain, and support the infrastructure both Cloud and On-Premises.
• Install, maintain, and support the various CI/CD, security and testing related tools
• Develop multi-stage CI/CD pipelines to enable faster and frequent releases to production; help delivery teams automate their build and deployment to cloud
• In some cases, act as a system administrator on different operating systems
• Document, and share knowledge on developed DevSecOps solutions
• Collaborate with clients and other PALO IT teams to understand client requirements, design comprehensive end-to-end approach, and implement DevOps solutions that meet client’s needs.

WHO YOU ARE:

• Strong Unix / Linux / Bash knowledge
• Deep understanding of cloud computing, e.g. technologies, deployment, costing, HA/DR, etc
• You should be able to coach delivery teams on DevOps principles, e.g. CI/CD, test automation, release automation etc. and engineering practices, e.g. TDD, BDD
• Well versed with at least one of the public, private or hybrid cloud platforms such as AWS, Azure, OpenShift, Google Cloud (GCP)
• Strong exposure on container technologies (eg: Docker, Podman, Kubernetes, AWS EKS, AKS, Openshift etc..)
• Hands-on experience with automation and infrastructure-as-code using various tools including Terraform, Pulumi, AWS CFN, ARM etc
• Experience with developing and implementing processes to handle releases from development to operations while respecting internal rules, and offering solutions for rollback etc
• Hand-on experience in designing , developing and migrating CI/CD pipelines (eg: Github Actions, Azure DevOps Pipelines etc..)
• You have a good understanding of microservice and event-driven architectures and DevSecOps practices which support relatively complex distributed systems
• Good understanding of monitoring and hands-on experience of setting up and configuring monitoring tools (e.g. ELK, Prometheus, Grafana and Splunk)
• Good to have strong RDBMS and NoSQL skill in deploying and fine-tuning such as MySQL, Oracle, Elasticsearch.
• Overall, 6-10 years of experience in platform automation, applying various DevOps principles.

MORE ABOUT PALO IT:

We’re eager to adapt to change, learn from our experiences and move to meet our planet’s urgent needs. With 2025 as our horizon, we are taking action to meet the following objectives:

• Become a climate net-zero company
• Attain 50% of revenue from projects with a positive impact
• Train 100% of our workforce on impact
• Achieve B Corp certification among all 16 of our offices across the globe
• Continuously measure & improve employee happiness

Our clients (https://www.palo-it.com/en/case-study) are amongst the world's most successful companies. We innovate with both established Fortune 1000s, SMEs and start-ups who aim to make an impact, become global leaders and address the world's most complex challenges.

WHAT WE OFFER:

• Stimulating working environments
• Unique career path
• International mobility
• Internal R&D projects
• Knowledge sharing
• Personalized training

For more on our team culture and benefits in Singapore, check out our careers page (https://www.palo-it.com/en-sg/careers)

PALO IT Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Palo IT SG does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Palo-IT.

Your personal data will be processed for the purposes of managing Palo-IT’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.palo-it.com/en/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Just imagine your future with us…

At Aurecon we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position you will join our Singapore Buildings business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it’s the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Taking responsibility for projects from initial design, through to construction and final review.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• A Bachelor’s Degree in Mechanical Engineering, with minimally 3 to 4 years of relevant experience in Buildings Mechanical Design.
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.

We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 7,000+ experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Job Summary:

We are seeking a talented and motivated Data Engineer to join our Software Engineering team. In this role, you will play a key part in designing, developing, and maintaining ETL processes using the Talend ETL toolset. You will work closely with team members to extract, transform, and load data from diverse sources, ensuring data integrity and quality. This position offers the opportunity to work on cutting-edge technologies like Hadoop, Spark, and Python, while contributing to impactful projects.

Key Responsibilities:

· Design, develop, and maintain ETL jobs using the Talend ETL toolset.

· Create ETL pipelines to extract, transform, and load data from multiple sources, including Cloudera, PostgreSQL, and SQL Server databases.

· Develop and optimize database tables and apply constraints to meet business requirements.

· Collaborate with team members to analyse source system structures and data retrieval methods.

· Support the development of data transformation logic using SQL, Python, and other scripting languages.

· Clean, validate, and transform data to meet schema and quality standards.

· Work with the team to implement data quality improvement plans.

· Troubleshoot data integrity and process issues to ensure efficiency and accuracy.

Technical Skills & Experience Required:

· Hands-on experience with Talend ETL tools (e.g., Talend Studio).

· Strong programming skills in Python and experience with Apache Spark.

· Proficiency with Hadoop ecosystem tools, including Hive, Impala, and HDFS.

· Solid understanding of data warehousing and data modelling techniques.

· Familiarity with relational databases such as PostgreSQL, SQL Server, and distributed systems like Cloudera.

· Experience with data visualization and analytics tools (e.g., Tableau, Power BI, etc.).

Qualifications:

· Bachelor’s degree in computer science, Mathematics, Engineering, or a related field.

· Strong interpersonal skills with a collaborative mindset.

· Excellent communication skills to interact with team members and projects effectively.

· A positive attitude and a proven ability to work within a team-oriented environment.

Soft Skills:

· Team player with strong problem-solving skills.

· Willingness to learn and adapt to evolving technologies.

· Ability to work under minimal supervision and meet project deadlines.

• Planning and overseeing the construction operations of a project Conducting.
• Site layout.
• undertaking surveys.
• setting out sites.
• Work schedule.
• Managing equipment & materials at site.
• Organizing the workers.
• Safeguarding the environment.
• Checking and modifying plans and specifications for constructability, efficiency, and safety.
• Developing cost estimates and preparing bids.
• Managing subcontractor firms.
• Preparing site reports and filling in other paperwork.
• Working with the owner to ensure that the project meets requirements.
• Solving job site technical problems,moving between the field and office.
• Gaining additional education and training.
• Skilled in Using of Autocad, MS office,ability to prepare schedule in MS Project.

JOB REQUIREMENTS

1. Bachelor Degree in Civil Engineering / Equivalent
2. Experienced in Construction Site
3. Sound knowledge of Engineering,construction, and design.
4. Great leadership and organizational skills.
5. Great written and verbal communication skills.
6. A willingness to learn.

Responsibilities:

• Develop and draft process improvement initiatives to enhance occupational safety, product quality, energy efficiency, production capacity, and cost-effectiveness.
• Implement process improvement projects using the Management of Change system and/or Non-Regular Work system.
• Collaborate with R&D and Operations teams to coordinate, plan, and execute new grade trial runs, including overseeing trial operations and evaluations.
• Monitor process performance and key parameters to identify and mitigate risks that may impact plant stability, safety, or product quality.
• Provide technical support in troubleshooting process-related issues, conducting root cause analyses, and recommending corrective and preventive actions.
• Contribute to the preparation and implementation of safety and quality standards by participating in relevant studies such as HAZOP and FMEA.

Requirements:

• Singapore Certified Energy Manager qualification is preferred.
• Familiarity with the Safety Case Regime is essential.
• Knowledge of IATF 16949 standards is preferred.
• Understanding of ISO9001, ISO14001, ISO45001, and SS651 standards.
• Familiarity with IEC 61511 standards is an advantage.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Summary:

We are seeking a skilled and motivated Software Engineerto join our dynamic development team. The ideal candidate will be responsible for designing, developing, testing, and maintaining software applications. You will collaborate with cross-functional teams to deliver high-quality software solutions that meet business needs, enhance user experience, and drive the company’s technical goals forward.

Key Responsibilities:

• Software Development: Design, develop, test, and deploy software applications based on business requirements and specifications.
• Code Quality & Optimization: Write clean, efficient, and maintainable code while adhering to best practices, coding standards, and guidelines.
• Collaboration: Work closely with other software engineers, product managers, designers, and other stakeholders to gather requirements, discuss design concepts, and review code.
• Debugging & Troubleshooting: Identify, diagnose, and resolve issues within the application and infrastructure in a timely manner.
• Testing: Develop unit and integration tests, perform code reviews, and ensure the application is thoroughly tested and free of bugs.
• Continuous Improvement: Stay current with emerging technologies, development tools, and trends in the software engineering field. Suggest process improvements and contribute to the overall evolution of the product.
• Documentation: Maintain accurate documentation related to software designs, architectures, and code implementations to ensure that knowledge is shared across teams.
• Performance Monitoring: Implement application performance tracking, optimize code, and resolve scalability issues.

Required Skills and Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience).
• Proven experience as a Software Engineer or similar role.
• Proficiency in one or more programming languages such as Java, Python, C#, JavaScript, Ruby, etc.
• Solid understanding of algorithms, data structures, and software engineering principles.
• Familiarity with front-end technologies (HTML, CSS, JavaScript frameworks) and back-end development (databases, APIs, server-side logic).
• Experience with version control systems such as Git.
• Strong problem-solving skills and ability to troubleshoot complex issues.
• Knowledge of agile software development methodologies.
• Strong communication skills and ability to collaborate effectively with cross-functional teams.

Personal Attributes:

• Self-motivated, proactive, and eager to learn.
• Strong attention to detail and quality.
• Ability to manage multiple tasks and prioritize effectively.
• Adaptable to changing requirements and environments.
• Collaborative and a team player, yet capable of independent work.

Work Environment & Benefits:

• Competitive salary and benefits package.
• Opportunity for professional growth and career advancement.
• Supportive and inclusive work culture.

Please state your current and expected salary together with earliest date available with your application.

Job Description

• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

Requirements

• Bachelor of Civil Engineering (or equivalent) – from a University recognized by Professional Engineers Board (PEB) of Singapore
• 1-2 years design experience in civil infrastructure works or transportation planning
• Good interpersonal and analytical skills
• Excellent technical and project management skills
• Usage of Microstation or Autocad design drafting tools; experience in Bentley design tools and transport modelling software will be an advantage.