Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Key Responsibilities:

• Project Planning and Scheduling: Develop comprehensive project plans and schedules that incorporate all project activities, milestones, and deliverables. Utilize project management software to ensure accurate tracking and reporting.
• Risk Management: Identify potential project risks and develop mitigation strategies to minimize impact on project timelines and budgets.
• Resource Allocation: Efficiently allocate resources, including manpower, materials, and equipment, ensuring that projects are completed within budgetary constraints.
• Stakeholder Communication: providing regular updates on project progress, potential challenges, and changes to project plans.
• Quality Control: Ensure that project planning and execution adhere to industry standards, company policies, and client specifications, maintaining high quality and safety standards.
• Continuous Improvement: Analyze project outcomes and processes for lessons learned and opportunities for improvement in future planning and execution phases.
• Team Leadership: Lead and mentor junior planning engineers and other project staff, fostering a collaborative team environment.

Required Qualifications:

• Bachelor’s degree in Engineering, Construction Management, or a related field.
• A minimum of 5 years of experience in project planning and management within the construction or engineering industry.
• Proficiency in project management software (e.g., Primavera P6, MS Project, powerpoint).
• Strong understanding of engineering principles, construction methodologies, and project management best practices.
• Excellent analytical, organizational, and problem-solving skills.
• Desired Skills and Attributes:
• Strong leadership and team management skills.
• Exceptional communication and interpersonal skills.
• Ability to work under pressure and manage multiple projects simultaneously.
• Strategic thinker with a proactive approach to project planning and risk management.
• Commitment to continuous learning and professional development.

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

Responsibilities:

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in electronics product manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for a Application Engineer (BMS/EPMS) to make an impact!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Leading the Deployment of Application for Building Management System / Electrical Power Management System
• Lead technical discussion and clarification with the customer acting as key contact person for all technical related topics. Under Project Manager leadership monitor engineering deliverables and progress through continuous communication with team members and perform regular technical status reports.
• Take active part in meetings with the customer. Prepare and conduct Factory Acceptance Tests (FAT) with the customer.
• Perform and get customer approval on basic and detailed design of integrated solutions in line with the contract (technical, time & performance requirements) and leveraging Schneider Electric portfolio of products and systems, maximize project profitability and manage technical risk.
• Ability to work independently while also collaborating with global teams and complying to global standards.
• Produce engineering outputs such as System architecture, sub-systems interfacing points, detailed point schedules, control panel drawings, equipment and control valve schedules, description of operations, database generation, graphics development, system hardware and software configuration and programming, etc. Proposal of HVAC and EMS controls strategies in various application.
• Master all technical aspects of the Project: design, integration, testing, FAT, installation, commissioning, warranty. Validate technical choices compliance with the design (based on Technical Design Process).
• Manage stakeholders involved in the execution.

What qualifications will make you successful for this role?

• Degree in Engineering or its equivalent discipline
• 5 years leading technical projects or as Solution Application Engineer
• 5 years in his technical field of expertise (PLC/ DDC, SCADA Systems)
• Knowledge of data center and/or other mission critical facilities design, operation and maintenance.
• Proven ability to lead with agility functional and remote technical team having different fields of expertise
• Proficiency in Programmable Logic Controller, SCADA and DDC Controllers (preferably in Schneider brand) development and implementation for redundant system architectures on HVAC applications including chiller systems
• Knowledge of HVAC applications including Chiller Systems, Air Handling Units, Fan Coil units, Computer Room Air Handlers, Mechanical ventilation units, Sanitary and Plumbing, Fire Alarm, Low voltage and Medium/High Voltage Electrical systems and other miscellaneous systems.

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

Job Description:

• Preparation of project documentation e.g. tender, quotation, progress claims, drawings, checklist, etc
• Responsible for site coordination and supervising to ensure projects are completed according to schedule.
• Liaise closely with clients, consultants, and suppliers on all project-related matters.
• Attend site walks, meetings, and site inspections when required.
• To carry out technical support functions in mechanical engineering work on site.
• To ensure effective project management on design, installation, testing, commissioning, servicing, and maintenance activities.
• Attend meetings, and prepare project schedules and progress reports.
• To ensure smooth and timely delivery of the project.
• Any other duties as assigned by superior.
  

Job Requirements:

• At least a Diploma in Mechanical Engineering or its equivalent.
• Minimum 3 years of relevant working experience in M&E or the construction industry.
• Possessing relevant safety certificates is an advantage.
• Knowledge of equipment installation, testing & commissioning, and troubleshooting as per M&E drawings or engineering specifications.
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site.
• Have knowledge of AutoCAD & Microsoft Office.
• Candidates without experience but with relevant qualifications will be considered as well.
  

Unified Communications (UC) Engineer/Analyst

Job Description:

• Primary handling voice incidents escalations
• Configuring and troubleshooting of CUCM, CME, Cisco Unity Connection, Cisco Unified CCX, Cisco IP Phones, Cisco IP Communicator, Cisco Jabber, Cisco Voice Gateways (SIP, H323, MGCP)
• Configuring Cisco IP Phones, Expansion Modules, Extension Mobility Profiles, Voicemail, Cisco Jabber, Cisco IP Communicator.
• Upgrading IP Phone firmware in CUCM and CME to fix vulnerabilities.
• Monitoring alerts, collecting traces and debugs for voice incidents involving call flow issues.
• Remediating all endpoints, gateways and servers and making sure all are 100% compliant.
• Engaging Cisco TAC and working along with them to resolve complex incidents.

Job Requirements:

• Degree / Diploma in computer or Electronics Engineering
• CCNP Cisco Collaboration certification
• Minimum of 14+ years of related IP telephony / Unified Collaboration /Telepresence implementation or Administration experience including some of the following:

-Knowledge with TELISCA Call Recording troubleshooting

-Setup & maintenance of Cisco Collaboration and meeting products such as CUCM, CUC, IMP, CMS, TMS.

-Capable to install, integrate, maintain, modify, improve, enhance and upgrade the hardware and software of the Cisco Collaboration products

-Experience in administration of Cisco UC servers in Cisco UCS platform

-Experience in setup & troubleshooting of H323, SIP Trunks, SCCP, MGCP Voice Gateways, etc

-Experience in Cisco IP Phones

-Experience in integration with AD, DNS, LDAP etc…

-Experience in Single Sign-On (SSO) setup and troubleshooting.

-Knowledge in Routing, Switching and Security

-Knowledge in Server, Local and Group Policy, User management, Services, etc

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Responsibilities:

• Create test plans and test reports for functional and/or performance tests.
• Create test cases based on user stories or functional specifications.
• Conduct manual and automated testing (if applicable) on software applications.
• Conduct performance testing to ensure that the delivered system meets the performance requirement.
• Identify, track and retest bugs.
• Report testing progress to the project stakeholders.
• Provide support for User Acceptance Test.
• Work closely with the project team to develop a strong understanding of the project and testing objectives, and to ensure that bugs reported are fixed within the timeline.

Prerequisites:

• Degree/Diploma in Computer Science, Computer Engineering or its equivalent.
• Must have at least three years of software testing experience in web-based applications.
• Good oral and written communication skills.
• Strong troubleshooting and problem-solving skills.
• Experience with CI/CD tools (i.e. Gitlab or Jenkins).
• Experience with open-source automated testing frameworks (i.e. Playwright, Cypress, Selenium, Appium or Cucumber).
• Experience with API testing as well as integration testing with external systems.
• Experience with open-source performance testing tools (i.e. JMeter, K6, Gatling or Locust).
• Proficiency in programming languages (i.e. Python, Java or JavaScript).
• Working experience in an Agile environment will be an added advantage.
• Basic understanding of SQL.
• To drive and advocate continuous improvement in testing practices and tools.
• Ability to work independently with minimal supervision.
• Certification for software testing (i.e. CTFL, CTAL, CSTE, CSTP or CSQA) will be an added advantage.

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

• Participate in research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities.
• Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
• Identifies cost drivers to influence design decision making towards target costing.
• Ensure product/module cost models and quotes are up to date at launch and effectively rolled out.
• Reviews and negotiates supplier terms and conditions exceptions to mitigate risk.
• Supports price negotiations with opportunities to drive short- and long-term cost reduction improvement.
• Builds strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborates with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partners Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participates in project meetings/brainstorming sessions to identify solutions available.
• Performs other duties as assigned.

We are seeking a motivated and proactive Electrical & Electronics Engineering/ Electronics & Computer Engineering Intern to join our dynamic engineering team in Singapore. The intern will gain valuable hands-on experience in the design, development, testing, and troubleshooting of electrical and electronic systems. You will be working closely with experienced engineers and contribute to the ongoing development of projects that involve circuit design, hardware testing, and product development.

Role and Responsibiltities :

Circuit Design & Analysis: Assist in designing electrical and electronic circuits, including power supplies, analog and digital circuits.

Testing & Validation: Participate in testing prototypes, conducting experiments, and validating design specifications against real-world performance.

Hardware Prototyping: Help build and assemble prototype systems for various projects, ensuring accuracy and compliance with engineering standards.

Troubleshooting & Problem-Solving: Support the identification and resolution of issues in electrical/electronic systems, including testing components and sub-systems.

Documentation & Reporting: Assist in preparing technical documentation, test reports, and design specifications to support ongoing projects and future development efforts.

Collaboration: Work alongside with software developers/ engineer, and project managers, to develop integrated solutions.

Research & Development: Contribute to ongoing research in the field of electrical/electronics engineering, staying updated on emerging technologies and industry trends.

Ad-hoc Projects: Assist with various other engineering-related tasks, such as simulation work, software tools development, and equipment calibration.

Requirements:

Educational Background:

Currently pursuing a Diploma or a Bachelor’s degree in Electrical and Electronics Engineering, Electronics and Computer Engineering, or a related field.

Technical Skills:

Knowledge of circuit design and analysis.

Familiarity with Microsoft office e.g. Word, Excel, Powerpoint.

Basic understanding of microcontrollers (e.g., Arduino, Raspberry Pi).

Hands-on experience with oscilloscopes, multimeters, power supplies, and other lab equipment.

Understanding of embedded systems, PCB design, or power electronics.

Knowledge of industry standards and regulatory requirements for electrical systems.

Experience with CAD tools (e.g., AutoCAD ) for circuit board design is a plus.

Programming Skills:

Familiarity with programming languages (e.g., C ++, Python ).

Basic knowledge of embedded systems development is a plus.

Problem-Solving: Strong analytical and problem-solving abilities with attention to detail.

Communication Skills:

Good written and verbal communication skills to effectively collaborate within a team.

Team Player:

Ability to work in a team-oriented environment while also demonstrating initiative and independence.

Benefits:

Exposure to real-world engineering projects.

Mentorship and guidance from experienced professionals in the field.

Opportunity to develop skills in both hardware and software aspects of electrical/electronic systems.

Job Description:

• Assists Quality Engineer in activities related to quality assurance and control system and other quality programs
• Performs measuring, testing, inspection and assists manufacturing with the interpreting of the quality and workmanship standards.
• Downloads quality information from quality system used for quality metrics reporting.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Prepares quality documentation or equivalent
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirements:

• NITEC / ITC / Diploma in any discipline or with at least 2 years working experience in the related manufacturing environment.  Proficiency in written and communication skills in English
• Ability to interpret within established procedures,
• Good team player, independent and self-motivated

Job Description:

• Responsible for incoming quality assurance
• Accurately completes all administrative activities associated with quality inspection 
• Performs incoming inspection
• Downloads quality information from quality system to be used for Quality reports 
• Prepares Inspection plan or equivalent.
• Prepares Statistical Process Control Charts where required.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirements:

• NITEC / ITC / Diploma in any discipline or with at least 2 years working experience in the related manufacturing environment.  Diploma / ITC / NTC in Mechatronics / Electrical & Electronics engineering
• Proficiency in written and communication skills in English
• Practical computer skills and knowledge with hands-on ability

Responsibilities:

1. Responsible for packaging solutions and design, defining performance criteria for signal integrity (SI), power integrity (PI), and thermal performance.

2. Optimize power performance in packaging design, focusing on PI and SI parameters.

3. Manage collaboration and technical communication with packaging and testing vendors.

Requirements:

1. Bachelor’s degree or higher in Electronic Engineering, Microelectronics, Computer Science,

or a related field.

2. Minimum of 5 years of experience in packaging design and development, or experience in

project development at a design company.

3. Strong communication and coordination skills, teamwork spirit, and resilience under

pressure.

4. Proficiency in both written and spoken English and Chinese is a plus.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Key Responsibilities:

The Inventory Controller will be the key contact point of products and supplies count, ensuring that inventory remains balanced, restocks supplies, assists in maintaining inventory records, and provides customer assistance as necessary. The incumbent is expected to investigate and provide understanding on any variances found during either daily cycle count, month-end system matching count or year-end PI count, monitor on materials shelf life in stock before the materials expiry and follow warehouse SOP and safety aspects of warehouse operation.

Job description:

· Organize, monitors and maintains warehouse inventory level; processes purchasing orders as required; tracks orders and investigates problems

· Records purchases, maintains database, performs physical count of inventory, and reconciles actual stock count to computer-generated reports

· Supervise Logistics Admin Staff.

· Contribute to process optimization and ensure efficiency in warehouse operations

· Maintain accurate, complete and authenticity warehouse records

· Conduct stocktake/inventory stock count

· Monitor and validate all inventories, perform cycle count of all products and perform monthly short dated checks.

· Follow SOPs and best practices in the warehouse

· Ensure timely operations (shipment delivery) execution

· Work with internal and external stakeholders to ensure efficient flow of all shipments and manage inventory of all products on monthly and annual basis.

· Assist the Warehouse Manager in the implementation of projects and ad hoc logistics requirements

· Processes and documents return as required following established procedures.

· Any other ad-hoc duties as assigned and required

Key Qualifications

· Diploma in Logistics/Supply Chain, or any related field

· Possess at least 1 year of relevant experience

· Able to work in a fast pace environment

· Good analytical and logistical thinking abilities.

· Strong written and verbal communication skills.

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a/an Supplier Quality Engineering Assistant located in Kallang, Singapore.

Job Description:

• Responsible for engineering tests and technical functions related to the support of Supplier Quality Engineering
• Supports Product Engineering, Production and Quality Engineers/Managers with customer interfaces as necessary on quality related issues
• Assists in Supplier Quality Audits
• Interfaces with suppliers on technical/quality issues, RMA, corrective and preventive actions
• Provides factory support to identify and resolve issues associated with purchased parts, materials and manufacturing
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

The experience we're looking to add to our team:

• Diploma in Mechanical Engineering / Electromechanical Engineering / Electronics Engineering / Manufacturing Process Technology
• Ability to interpret within established procedures and practices
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• 2 years experiences in dealing with suppliers on non-conformances and investigation

Job Summary:

• Industry: Healthcare
• Working location: Kent Ridge

Job Responsibilities:

• Leads quality improvement initiatives and spearheads innovation projects, identifying areas for enhancement and implementing best practices.
• Assists in managing the day-to-day operations of the department, ensuring high standards of patient care and staff performance
• Analyzes data and prepares reports on quality metrics and innovation outcomes.
• Conducts training on quality improvement, new technologies, and innovative care practices, including facilitating quality improvement workshops.
• Ensures compliance with healthcare regulations and organizational policies. Supports Nursing in compliance to audits’ standards.
• Participates in interdepartmental meetings and committees to represent the Nursing Departments’ quality and innovation interests.
• Supports the department in managing administrative support and coordination with external parties for innovative projects and research grants.
• Establishes and maintains relationships with funding agencies, potential partners, and other stakeholders in the healthcare innovation ecosystem.
• Facilitate, coordinate and support Nursing Leadership with the department's annual work plan.
• Consolidates, reviews, and analyses periodic and ad-hoc statistical and management reports
• Undertakes any other tasks assigned.

Job Requirements:

• Bachelor’s Degree in Business/Engineering/Industrial Design/Healthcare from a recognized institution.
• Possess knowledge of quality improvement methodologies and innovation processes in healthcare.
• Strong understanding of AI and robotics applications in healthcare, or willingness to learn.
• Proficient in Microsoft Office, in particular Word, Excel and PowerPoint.
• At least two years of experience in facilitating workshops and conducting training.
• Familiarity with data analysis and statistical tools
• Knowledge of lean management principles and Six Sigma methodologies.

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only short-listed candidates will be notified.

Registration No: R24123448 / EA Licence No: 12C6253

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d