Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Determine project scope based on requirements, defining the scope of work and advising senior system engineers on resource calculations for service delivery.
• Install and configure services according to approved implementation plans.
• Perform technology, professional, and maintenance support services
• Provide level 1 support for hardware, troubleshoot hardware/software issues in installed services.
• Deliver technical documents such as high-level design documents, user acceptance test (UAT) docs, and as-built documentation.
• Conduct knowledge transfer training when required.

Requirements:

• Preferably 3 years of relevant experience
• Strong technical knowledge in the assigned solution domain/product.
• Good knowledge of product portfolios in other technology domains.
• Expertise in enterprise product implementation, migration, and support.
• Strong interpersonal skills with a customer-centric attitude.
• Excellent oral and written communication skills.
• High attention to technical details, effective priority management, and planning skills.
• Results-oriented with strong documentation skills.

Interested candidate who wish to apply for the advertised position, please click on “Apply Now”. We regret that only shortlisted candidates will be notified.

Job Code: EEST

EA License No. 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and it’s overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries

Hardware Engineer

Responsibilities

• Involved in the full cycle of development for reference board, modules and product solutions.
• Design, simulate, develop and test electronic modules & systems containing various interfaces, including microcontrollers, SOC, wireless, memory system, networking and power control sub system and etc.
• Generate documentations regarding concepts, specifications, schematics, test reports, verification report etc.
• Work as a team and coordinate closely with Software team, Marketing team and customers to deliver projects on time.

Requirements

• Degree in Engineering with minimum 3 years of experience in electronics hardware design, or minimum 10 years’ experience for senior role.
• Good knowledge in digital & analogue circuits, ultra-low power, audio system, power management, wireless & RF design, high speed computing technology etc.
• Experience on detailed electronics design, implementation & testing or complex PCBA designs, power integrity, signal integrity, design for test / manufacture & quality, wireless integration, etc.
• Strong hands on experience on hardware test, issue isolation, and debug
• Knowledge on test and support for product certifications
• Must be a good team player to work closely with software team.
• Initiative and willing to work in an energetic team

Company Reg No.: 201131609D, Licence No.: 11C4684, Reg No: R1655133, Ashraf Ali

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Wireless Communication – FPGA Design Engineer

The candidate should be a dynamic and self-motivated individual that has a strong interest in advanced communications systems for use in land, maritime, defense, satellite and space applications. The candidate will work on projects which are exciting, demanding, rewarding and have opportunities to learn and grow on the job.

Responsibilities

· Design and develop signal processing algorithms for wireless communication systems and acquire mastery of relevant tools

· Conduct simulations on end-to-end system with various RF impairments and channel fading conditions

· System integration, prototype bring-up, performance characterization and optimization

· Physical layer validation, field testing, debugging and troubleshooting

Requirements

· Bachelor in Electrical Engineering, Computer Science or similar field of studies with relevance to Infocommunication

· Good understanding of wireless communications system, signal processing techniques or RF system

· Experience in simulation tools, programming and scripting languages (MATLAB, VHDL, Verilog, C/C++, Python, Ruby) is a plus

· Good analytical and problem-solving skills

· Excellent written and verbal communications skills

· Thorough, disciplined, methodical, and good documentation habits

· Able to work independently as well as within a multi-cultural team spread

· Fresh graduates with an interest in this field are welcome to apply.

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic , other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will commensurate with skill and experience

5 days work week

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

RF Engineer

Location: Singapore

Nature of Job: Field + Office

Duration: 1 Year Extendable

Required Skills:

• Knowledge of Radio frequency and telecom basics.
• RF Survey Skills
• LOS Survey Skills
• Drive Testing/walk testing Skills using Tems/Nemo laptop based and handheld solution.
• Log File analysis and DT report preparation using post processing tools like Tems discovery,
• Nemo Analyzer or Actix.
• Basic Cell parameter Knowledge.
• Prior experience of 4G/5G Network Drive testing and walk testing must.

Job Description:

• Qualified candidate will be doing Drive test, walk test of a Singapore Telecom Network for
• single site verification, cluster/site optimization, feature testing and various other purposes when needed. Candidate will have to export log files and create report for the same.
• Candidate should be flexible to work 24*7

Company Reg No.: 201131609D, Licence No.: 11C4684, Reg No: R1655133, Ashraf Ali

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

The Innovation Labs team is responsible for exploring new technology areas and related opportunities, proposing new ideas and translating new ideas all the way to production.

A week in the life of an R&D Software Engineer:

• In this role, the Software Engineer will be working together with a team developing proof of concept (POC) solutions of new ideas.
• The role is suitable for developers, who are comfortable with either front-end or back-end coding languages, development frameworks and third-party libraries. Knowledge on cloud platforms such as Azure, AWS and GCP will be a plus.
• The Software Engineer must be able to work together with agile teams located at different geographical location.

Requirements:

• Bachelor/Master’s Degree in Computer Science or equivalent with minimum 5 years of relevant experience.
• Strong proficiency in one or more programming languages such as JavaScript / Go / Rust / C++ and frameworks such as Node.js / Flutter.
• Strong OO design and analytical skills.
• Experienced with prototyping software solutions involving client-server projects.
• Knowledge of software security and cryptography is an advantage.
• Good working knowledge of version control tools, continuous integration/delivery (CI/CD)
• Unit/function/system testing experience.
• Experience with Agile methodology is preferred.

Responsibilities

· Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc

· Once the plant is in operations, carryout routine maintenance activities

· Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.

· Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives

· Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.

· Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.

· Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.

· Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.

· Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.

· Plan and execute preventive and corrective maintenance works for plant turnaround.

· Perform strategy planning for control system expansion, upgrading and renewal.

Requirements

· Degree in Electronics/Electrical Engineering, major in control and instrumentation is preferred.

· Minimum 5 years of experience working and maintaining process control systems, especially Honeywell DCS, Siemens PCS7 and Triconex PLC. Familiar with the engineering tools and programming languages of these systems.

· 3-5 years working experience in the refinery or petrochemical industry environment.

· Experience and knowledge in field instrumentation and control valve are added advantage.

· Experience in control system expansion, upgrading and renewal projects.

To apply, please visit to www.gmprecruit.com and search for Job Code: 20721.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793| EA Personnel: Lionel Liew | Registration No: R1330693

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026