Job Description:

• Support MODEC's decision-making process by providing financial analysis, insights, and reliable information, proactively assess challenges and opportunities to ensure informed and strategic decisions are made, and Facilitate collaborations among the team, departments and entities seeking for improvement in accuracy and efficiency in Control activities.
• Handle consolidated managerial reports/presentations/analysis demand such as but not limited to:

• Monthly commercial and finance (C&F) meeting material

• Monthly MFR YTD report comments

• Monthly MdB financial report analytical comments

• Present consolidated managerial cost report and materials in internal and external meetings on demand.
• Organize and facilitate the budget exercise with Control manager.
• Handle ad-hoc needs from Management and provide information within the expected timeline by the situation.
• Maintain close relations with their direct reports to make sure the followings but not limited to:

• Provide necessary support to execute their routine and deliver materials

• Cascade down the instructions from Control Manager

• Catch issues need to be solved and escalate them to Control Manager where necessary

• Promote collaborations among the team

• Promote their development by giving regular feedback and follow-up

• Facilitate communication inside the Control department (Vessel/Corporate/BI/Bid, etc) and promote collaborations.
• Facilitate inter-department relations and encourage the collaboration to have necessary communication and information flown.
• Facilitate inter-entity relations and encourage the collaboration to have necessary communication and information flown.
• Continuously improve cost control processes and procedures to enhance the efficiency and effectiveness of the function.
• Ensure the usage of IMS by their direct reports and contribute to the governance and functionality regarding the following main aspects: define the coordination goals and projects schedule (when applicable) together with IMS team and follow up and guarantee that IMS Documents under their responsibility are updated and implemented.
• Ensure the alignment of their direct reports with Company Objectives, Policies, Procedures and integration with Clients, Community, Suppliers and MdB Executive Team, by leading and engaging them, providing technical and behavioral guidance and feedback sessions and clarifying the career path.

Qualifications & Experience:

• Bachelor's degree in Business Administration, Economics, Accounting or related areas; Bachelor in Engineering, Accounting or Business Management.
• Previous experience in the offshore industry (FPSO Operator, Drilling Companies or other companies in the Oil and Gas sector) is a strong asset
• Accounting and financial knowledge are a strong asset
• Previous management experience is a competitive edge

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

The Assistant Chief Engineer supports the Director of Engineering in overseeing both the operational and design aspects of the hotels facilities. This role involves utilizing design software like AutoCAD to create and modify technical drawings, support engineering projects and ensure that all designs align with local standards and hotel requirements.

As an Assistant Chief Engineer (Project & Operation) we rely on you to

Project Management

• Assist in Planning & Execution - Collaborate with DOE to plan, implement, and overseeing engineering projects, including renovations, upgrades and new installations
• Prepare project budgets and manage expenditures to ensure that projects are completed within allocated financial resources
• Liaise with contractors and service providers to ensure that project specifications and schedule are met
• Utilize AUTOCAD and other design software to create detailed drawings and schematics for renovations, maintenance projects and new installations
• Assist in conceptualizing and drafting layouts for MEPS and HVAC systems that meet operational requirements and safety standards

Operational Support

• Evaluate equipment and system performance through detailed analysis
• Develop and update preventive maintenance schedules based on design specifications to enhance equipment reliability and lifespan
• Participate in evaluating team performance, providing constructive feedback and conducting regular training sessions to enhance skills
• Assist in developing and implementing emergency response plans related to engineering systems, including fire safety and disaster recovery protocols
• Maintain accurate records of maintenance activities, project progress and inventory of parts and supplies

We are looking for someone who:

• Experience in Project Management, Engineering Operations or a Similar Role Within the Hospitality Industry
• At least 3 years of relevant experience
• Strong leadership and interpersonal skills to effectively motivate and develop a diverse team
• Ability to perform under pressure and adeptly handle last-minute changes or requests

If you are the right person, what are you waiting for? Click the apply button now!

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Position Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualification/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Experience with automation tools: Ansible, Python
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.
• 2 years contract

Responsibilities:

• Perform on-site installation, troubleshooting and debugging of autonomous vehicle (AV) systems and related components.
• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets.
• Assist in routine data collection and documentation optimization or preventive maintenance.
• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet
• Collaborate with cross-functional teams to facilitate coordination between technical tasks and operational requirements.
• Any other additional duties relating to product and operations support.

Requirements:

• An Engineering diploma or degree in Electrical, Electronic, Mechatronics, Robotics, or Automation.
• Hands-on experience in systems deployment, service engineering, technical support, and/or operations coordination.
• Capability to adjust to a shift-based support working environment.
• Experience working in Linux OS environment.
• Practical expertise in electrical and electronic wiring as well as mechanical systems.
• Familiarity with ROS is a plus.
• A Class 3/4 driving license will be an added advantage.

Intern - Quality Assurances & Quality Control Administrator

ARYZTA Singapore is a multinational company, supplying buns and other baked products to QSR restaurants and other wholesale customers. We currently have a position open for an Intern - Quality Assurances & Quality Control Administrator.

Your duties will include:

1. Administer all Quality Assurances data and documents into the system
2. Assist in product evaluation and analysis of project samples to complete the projects to validate/change the process.
3. Assist with product (R&D samples) evaluation to complete shelf life evaluation and compute data (physical measurement).
4. Assist in finished products inspection to ensure the quality of finished products complies with APMEA and clients' expectation
5. Support related departments, for example, the Product Development team, with tasks/projects as assigned.
6. Input QA data and update QA reports by modifying and developing specifications.
7. Provide support with the Product Monitoring program- Moisture test, calibration, Bun Sensory Evaluation etc
8. Attend store visits, vendor audits, photo shoots etc., as necessary.
9. Assist with any other tasks/projects as assigned
10. Other ad-hoc duties assigned

Job Requirements:

· ITE/Degree/Diploma Holder Food Science & Technology Studies or equivalent

· No Working Experience Required. Students are welcome.

· Energetic individual, interpersonal skills and communication skills

· Problem Solving and People-oriented

· Well-versed with MS Office.

We are looking for a person who enjoys dealing with and working with various levels of management and external vendors.

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

We are looking for enthusiastic and confident Sales Engineers who have selling experience in the Singapore market. The role will report to our Director of Sales, Domestic with responsibilities including revenue generation of assigned portfolios. The attributes we are looking for include excellent communication skills, self-motivation contributing towards growth in prospecting, following up on leads; supporting clients and the overall sales organization in selling the full suite of bearings products across industries; and managing the B2B sales pipeline to meet the annual sales quota specifically in the Singapore market.

• Identify sales opportunities and develop new accounts
• Drive sales, monitor, track and take necessary actions to ensure that goals are met
• Maintain and prepare timely sales pipeline information in CRM and related reports
• Achieve monthly sales targets, objectives and track sales performance and metrics
• Preparation of proposals, submit quotations and tenders
• Ensure customer orders are processed accordingly
• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Enhance value-added selling approach
• Provide quality after-sales service to customers
• Experience in selling electronics/mechanical components

The Successful Applicant:

• Preferably with a diploma or degree in Mechanical Engineering or Business Administration with industrial experience
• Minimum 3 years of working experience
• Experience in Engineering or a related field would be an added advantage
• A team player who is meticulous and able to work independently
• Computer literacy (MS Office)
• Salary will commensurate with qualifications and experience

We invite interested and qualified candidates to write in with their updated resumes (in MS Word Format) and their current and expected salary.

We regret that only shortlisted candidates will be notified.

Benefits

• Competitive Salary Package, Mobile & Transport & Allowances
• Healthcare Coverage, Medical & Dental Benefits
• Promotional Opportunities, Career Advancement with Recurring Bonuses

Job Summary:

The HPC Storage Engineer will be responsible for managing the storage infrastructure within HPC environments. This role involves monitoring storage performance and optimizing through tuning and troubleshooting. Successful candidate with demonstrated experience in the HPC storage field may be considered for a Senior position.

Responsibilities:

Storage administration and optimization

• Work with Managed Services teams in managing and administering the storage infrastructure.
• Ensure storage reliability and availability within HPC system.
• Provide support on technical queries and troubleshooting storage-related issues.
• Implement best practices for storage monitoring and reporting.
• Monitor utilization rate, allocation and analyse the report for capacity planning.
• Conduct storage performance test and analysis.
• Collaborate with other teams for enhancement of storage performance and scalability.
• Develop and maintain comprehensive documentation for HPC storage infrastructure and processes.

Data management

• Create and execute a data placement strategy to optimize storage performance.
• Maintain data protection and disaster recovery strategies.
• Implement and maintain security measures to protect data integrity and prevent unauthorized access.

Designing and planning

• Assess future requirements and plan for storage expansion.
• Assist in the designing of future HPC system acquisition.
• Explore and evaluate emerging solutions in HPC storage technology.

Qualifications:

• Degree in a Computer Science, Engineering, IT or other relevant areas.
• At least 3 years of experience in managing storage infrastructure.
• Proficient in UNIX/Linux environments and command line interface (CLI).
• Good knowledge of HPC storage principles.
• Experience in managing parallel file system (Lustre, GPFS, BeeGFS).
• Good knowledge of RDMA-based interconnect (InfiniBand, RoCE).
• Demonstrate ability to analyse complex issues and develop effective solutions.
• To be considered for Senior position, candidates should have at least 5 years of experience in roles that involve the deployment of HPC storage infrastructure, covering key areas such as designing, installing, configuring, documentation and providing admin/user training.

Job scope

As a Senior RF application engineer, you will be responsible for developing/testing the evaluation board and product board for RF SoC targeting at UWB and BLE applications. Your responsibilities will include collaborating closely with chip designers to understand the chip function and testing requirement, and optimize the performance of the solution at a system level. Additionally, you will provide direct support to end customers in integrating the chip into their products.

Key responsibilities:

1. Develop and test EVBs for RF SoC targeting at UWB and BLE application

2. Develop and test product board including RF SoC, flash, power supply, filter, antenna, etc.

3. Conduct test and work with certification bodies for FCC, CE, CCC certification

4. Provide support to end customer for chip integration

Key Knowledge Requirements:

1. Familiar with typical power supply circuit e.g. DCDC, LDO, and the design principles of power integrity and isolation

2. Understanding of signal integrity for high-speed digital signals

3. Knowledge of transmission line impedance, matching, filter, EMC/EMI, antenna

4. Familiar with the requirement and testing of FCC, CE, CCC certification

5. Proficiency in PCB design software PADS/Altium Designer/Allegro for schematic design, PCB design, BOM generation

6. Experience with RF testing equipment including spectrum analyser, signal generator, oscilloscope, network analyser

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Manufacturing Engineering, Supplier Quality

Reports to: Senior Molding Engineering Manager

Function: Global Research & Development

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible for the plastic injection tooling and molding project management of new product developments, transferred projects, capacity expansion, as well as continuous improvement for production tooling.

Duties and Responsibilities

> Plan and manage molding engineering budget

> Support all molding engineering related projects

> Lead projects related to quality, yield, process efficiency, and capacity improvement

> Lead end-of-life issues pertaining to product materials and components

> Lead qualifications of 2nd source of materials or equipment for business continuity

In New Product Development Support,

> To be accountable as project leader for tooling development from prototype until mass production stage. Tasks are included but not limited to below aspects:

• Manage the tooling project to ensure project timeline, capital investment and tooling performance target are consistently met
• Review and provide valuable input to Design For Manufacturing (DFM) documents from mold maker, and to assist R&D product designers to optimize product design from tooling scalability and best molding production cost perspective
• Analyze and understand product design, generate mold specification and acceptance criteria, conduct mold design review
• Oversee mold, equipment, process testing and debugging, conduct testing result review and drive mold performance improvement
• Document and transfer tooling knowledge from 1 cav prototype to multi cav mass production tooling
• Molding supplier factory molding validation IQ/OQ/PQ review

> Collaborate with in-house manufacturing and quality team to qualify new tooling. The tooling are for injector parts, IOL optical PP mold, and process aids for material production

> Compile tooling and molding related documentation in accordance to the regulatory requirements, and maintain the quality of molded components

> Initiate the Change Control submission and review, conduct Risk Assessment, draft and get Validation Plan, Validation Protocol/Report reviewed and approved based on the project master plan

In Sustaining Engineering

• Monitor and evaluate production tooling performance at vendor sites and lead the project to develop new tooling for capacity expansion and replacement/renewal
• Trouble shoot IOL and injector defects potentially related with injection molding production which occurs in the vendor’s manufacturing site (Japan, Singapore, Malaysia, etc.), drive solutions with data analysis and fact-based approach
• Be involved in sourcing of alternative vendor of plastic tooling and molding production for long term business sustainability

Requirements

Experience

• At least 3 years of technical experience in medical device/pharmaceutical industry
• Understand IQ/OQ/PQ validation requirement in accordance with IS013485 standard
• Able to write, review and coach validation protocol and report
• Track record of successful tooling and molding project management, tool makers and molding suppliers handling experience in the region
• At least 3 years of hands on experience in tooling design and Design For Manufacturing (DFM) for product and tooling design
• Solid molding process knowledge is required, and with at least 3 years of Scientific Molding practitioner

Skills/Accreditations

• Preferably Lean 6 sigma green belt trained, understand DMAIC approach, Failure Mode Effect Analysis (FMEA), Gauge R&R and Design of Experiment for trouble shooting and process improvement
• Strong technical writing skills
• Quick learner with logical thinking, good communication skills in English, customer focused, ability to drive results
• Able to read and speak Japanese is a plus

Academic Qualifications

• Bachelor‘s degree in mechanical or chemical engineering field related to plastic injection molding, or diploma in Engineering with more than 3 years experience in project management of customized mold design

Travel requirements

• 10 – 25%

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Job Description:

• Administer project planning and project execution;
• Ensure all project activities are peformed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Coordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Maintain close liaison and communication with field operations team;
• Ensure all company reports and documentation are completed accurately and on time;
• Perform any other related duties as and when assigned by Manager.

Job Requirements:

• Diploma/Degree in Mechanical Engineer or related Engineering field;
• Min. 3 years of related field experience;
• Knowledge of Autocard will be advantageous;
• Dynamic and good team player;
• Able to travel overseas as and when required.

Responsibilities:

1、Responsible for the research and development of wireless communication system, positioning system, radar system, motor control system, baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Exposure to IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Responsibilities:

1. Engage in firmware/software development for communication systems, positioning systems, bioradar systems, and related products.

2. Engage in V-model development, which includes requirement analysis, high-level design, low-level design, implementation, unit testing, integration testing, and system testing.

Requirements (Firmware):

1. Bachelor’s degree or above, majoring in computer engineering, electronic engineering, communication, automation, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management and low-level driver development. Capabilities to build the toolchain with Python would be advantageous.

3. Experience with embedded operating systems such as RTOS would be appreciated. Knowledge of pre-emption, IRQ, and embedded communication protocols such as I2C, UART, and SPI is mandatory.

4. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

5. Preferred experience includes ARM Cortex-M series hosted microcontrollers. Candidates with solid experience in ESP32, Raspberry Pi, Arduino, STM32, or similar platforms will have an advantage.

6. Competency in using debugging equipment such as oscilloscopes, logic analysers, and FW debuggers is mandatory.

Requirements (Software):

1. Bachelor’s degree or above, majoring in computing, software engineering, computer science, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management (static, stack, heap) and GUI. Candidates with hands-on experience in creating Windows based application with IMGUI will have an advantage. Capabilities to build the toolchain with Python would be mandatory.

3. Candidates with experience in building applications that facilitate TCP/IP, UDP, etc., will have an added advantage. Knowledge and proficiency in data structures management are essential, including sorting algorithms, linked lists, stacks, queues, trees, and hash tables.

4. Knowledge or hands-on experience with multithreading concepts such as IPC, MUTEX, Time Slicing, and Pre-emption will provide a significant advantage.

5. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

6. Experience with software pipeline automation tools such as Jenkins is appreciated.

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.