Responsibilities:

• Assist Project Manager in site supervision and management.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Controlling the cost of the materials and labour.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection, and monitoring of project progress with Main Con and Sub-cons.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies, and federal entities to ensure successfully implementation of the project.
• To manage daily operation of the project execution.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• To ensure that project paper works are properly kept and up to date.
• Ensure safe work procedures are implemented to control risk.
• Familiar with the relevant legal requirement.
• Other ad-hoc duties as assigned

Job Requirements:

• Degree in Civil Engineering recognised by the Professional Engineers (PE) Board or qualifications accepted by the Commissioner of Building Control for registration as Resident Engineer.
• At least five (5) years relevant experience including in planning the construction of vehicular structures and roads involving stage diversions.
• Self-motivated, dynamic and goal orientated candidate
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Able to start work within short period

1. Duties and Responsibility

Ø Install, test and commission company equipment at customers’ sites

Ø Check and monitor the performance of the installed system

Ø Carry out preventive maintenance services of the installed system

Ø Provide quality repair services which include troubleshoot of equipment problems, identify root cause, rectify defects and restore equipment operation

Ø Replacement of defective units, components or parts where appropriates

Ø Cleaning for components or parts where appropriates

Ø Able to work in Fab environment and perform standby duties

Ø Perform other related duties as assigned by supervisors

Senior Construction Engineer with experience in post-tensioning, structural repair, bearing replacement, and heavy lifting is a key figure responsible for overseeing construction projects. This role demands a high degree of independence and level of technical expertise, project management skills, cost control acumen, schedule management proficiency, and unwavering commitment to safety and quality.

Key Responsibilities:

1. Independent Work:

· Demonstrate a high level of autonomy in managing and overseeing specialized construction projects.

· Take initiative in decision-making and problem-solving within your areas of responsibility.

· Provide guidance and mentorship to junior engineers and project teams.

2. Multi-tasking:

· Manage and oversee multiple projects simultaneously.

· Prioritize tasks and responsibilities across projects to meet deadlines and objectives effectively.

· Adapt to changing project demands and swiftly address any emerging issues or challenges.

3. Method & Technical:

· Develop and implement construction methodologies and techniques specific to post-tensioning, structural repair, bearing replacement, and heavy lifting.

· Collaborate with clients to analyse project requirements and develop innovative solutions.

· Troubleshoot complex technical issues and implement solutions in real-time.

4. Cost Control:

· Develop project budgets and cost estimates, considering all aspects of specialized construction activities.

· Monitor project expenses and financial performance, identifying cost-saving opportunities.

· Collaborate with procurement teams to optimize material and equipment purchases.

5. Schedule & Program:

· Create project schedules and programs.

· Continuously update and adjust schedules to maintain project timelines and meet critical milestones.

· Identify potential scheduling conflicts and develop mitigation strategies.

6. Safety & Quality:

· Establish and enforce rigorous safety protocols and standards specific to the specialized construction activities.

· Conduct safety assessments and risk analyses to mitigate potential hazards.

· Implement stringent quality control and assurance measures to meet project specifications and industry standards.

· Collaborate closely with quality assurance teams to uphold and enhance construction quality.

Qualifications:

· Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.

· Extensive experience in construction engineering, with a focus on post-tensioning, structural repair, bearing replacement, and heavy lifting projects.

· Proficiency in specialized construction techniques and equipment.

· Strong project management skills, including budgeting and scheduling expertise.

· Knowledge of construction methods, materials, and regulations within the specialized domains.

· Good communication, leadership, and problem-solving abilities.

· Dedication to maintaining the high standards of safety and quality in all specialized construction activities.

A Senior Construction Engineer in this specialized role is instrumental in the successful completion of complex construction projects, ensuring they are executed efficiently, within budget, and in strict adherence to safety and quality standards. The position requires a unique blend of technical mastery, project management excellence, and an unwavering commitment to safety and quality assurance.

Woodlands 家私厂聘请家私木工

头手/中工多位

工作时间 ：

星期一至星期六 ， 9am - 6pm

星期天公共假期休息

加班一天可以至少3小时以上

有兴趣安排面试的求职者,星期一到星期五早上九点至下午五点打電話跟我們联系:

Ms Tan

6262 1559

Construction Engineer specialising in post-tensioning, structural repair, bearing replacement, and heavy lifting plays a critical role in assisting project manager in specialized construction projects within these domains. This role requires independence, strong multitasking abilities, technical aptitude, cost control skills, scheduling proficiency, and a commitment to safety and quality.

Key Responsibilities:

1. Independent Work:

· Demonstrate the ability to work independently on assigned tasks and projects.

· Take initiative in problem-solving and decision-making within your areas of responsibility.

· Seek guidance from senior engineers when necessary and report progress regularly.

2. Multi-tasking:

· Manage multiple tasks and responsibilities across various construction projects.

· Prioritize tasks efficiently to ensure timely project progress.

· Adapt to changing project conditions and address emerging challenges effectively.

3. Method & Technical:

· Develop and apply construction methodologies and techniques specific to post-tensioning, structural repair, bearing replacement, and heavy lifting.

· Collaborate with senior engineers to understand and implement project-specific technical requirements.

· Participate in specialized construction tasks independently and under supervision.

· Troubleshoot technical issues and contribute to solution development.

4. Cost Control:

· Assist in preparing project budgets and cost estimates, seeking guidance from senior team members.

· Monitor project expenses and proactively identify potential cost-saving opportunities.

· Support procurement activities related to materials and equipment.

· Participate in contract management tasks for subcontractors and suppliers.

5. Schedule & Program:

· Collaborate with senior engineers to develop project schedules and programs tailored to specialized construction activities.

· Independently update and maintain project schedules to ensure timelines and milestones are met.

· Identify scheduling conflicts and propose potential solutions.

· Facilitate communication and coordination within project teams.

6. Safety & Quality:

· Adhere to and promote safety protocols and standards specific to specialized construction tasks.

· Participate in safety assessments, identify potential hazards, and report findings to senior team members.

· Assist in implementing quality control and assurance measures to meet project specifications.

· Support quality assurance teams in inspections and documentation of compliance.

Qualifications:

· Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.

· Strong self-motivation and the ability to work independently.

· Basic knowledge of construction techniques, equipment, and materials.

· Interest in developing project management skills, including cost control and scheduling.

· Familiarity with safety regulations and a dedication to maintaining safety in construction practices.

· Effective communication skills and the ability to collaborate within project teams.

· A proactive attitude, a strong work ethic, and the willingness to take ownership of tasks.

A Junior Construction Engineer in this specialized role serves as an integral team member, contributing to the successful execution of complex construction projects. Independence, multitasking abilities, technical skills, and a commitment to safety and quality are key attributes for success in this role, with a focus on post-tensioning, structural repair, bearing replacement, and heavy lifting projects.

The primary purpose of the position of System Engineer is to analyze, test, and maintain the ASMPT’s Engineering Systems and Application to ensure they effectively support and contribute to the overall mission and objectives of the organization.

By analyzing business requirements, identifying issues, and providing timely support & solutions, this role helps improve ASMPT's efficiency, productivity, and competitiveness. Their work, through the provision of crucial technical support, ensures that ASMPT better meets customer needs and achieves strategic goals, thus playing a crucial role in fulfilling ASMPT's overall mission and objectives.

Responsibilities

• Management of Engineering Systems, such as Teamcenter PLM, Solid Edge and other tools utilized within the company.
• Preparation of training documentations for systems/functionalities deployed.
• Testing and evaluation of applications or software updates.
• Deployment of software or application updates.
• Preparation and testing of scripts for software distribution.
• Collect and analyze user requirements for new systems or system enhancements.
• Maintaining open communication with stakeholders and reporting progress and issues to relevant parties.
• Providing assistance to end-users who encounter issues or require guidance in using the system.
• Identifying and diagnosing system issues, errors, and malfunctions reported by users or detected through monitoring.
• Coordinating and implementing solutions to address system issues, including bug fixes, patches, or configuration changes.

Requirements

• Candidate must possess at least a/Degree in Computer Science, Information Technology or relevant
• Fresh graduates are welcome.
• Proficiency in CAD software such as Solid Edge or others.
• Basic knowledge in programming languages such as C# or others, depending on the job requirements.
• Basic PLM skills will be an added advantage.

We are a well-established construction company with an enviable track record in major civil engineering and building works. To meet our continuing growth, we require suitably qualified candidates for the following position:

Responsibilities

• Able to coordinate with consultants, sub-contractors, and relevant authorities
• Able to handle all trades of works on-site (ie structural works, architectural works, building works, M&E works, interior fitting-out works)
• Responsible for the effective management and completion of assigned projects including progress, quality, cost and client relations.
• Review and provide project-related correspondence including progress reports, proposals, requirements documentation, and presentations.
• Manage and monitor contractors’ input and performance to meet project objectives
• Manage defects’ rectification and improvement works of completed projects
• Implement various quality, safety, and environmental management systems

Requirements

• Degree in Building /Civil Engineering /Architectural with at least 5 years of related working experience
• Must possess a relevant degree in Building or Engineering
• Prefer R&R/town council project experience

Competitive remuneration package commensurate with qualifications will be offered.

Interested candidates are invited to apply via email with an updated resume, which should include current and expected salaries, date of availability, and a recent photograph in MS Word Format. We regret that only shortlisted candidates will be notified.

Thank you for applying

Position: Project Engineer

Location: No.7 Senoko South Road, Singapore 758071

Working day: Alternate Saturday

Benefits (What we offer):

• Competitive salary commensurate with experience.
• Opportunities for career growth and professional development.
• Positive and collaborative work environment with a supportive team.

Are you a driven and passionate individual looking for an exciting opportunity in the construction industry? Look no further! Kong Hwee Iron Works and Construction Pte. Ltd. is seeking a dynamic Project Engineer to join our team and contribute to our innovative projects.

Responsibilities:

• Collaborate with the project manager and team members to plan, organize, and execute construction projects from start to finish.
• Conduct site visits to assess project progress, identify potential issues, and ensure adherence to safety standards and regulations.
• Coordinate with subcontractors, suppliers, and other stakeholders to ensure timely delivery of materials and services.
• Prepare and review project schedules, budgets, and cost estimates to monitor and control project expenses.
• Supervise construction activities, including site preparation, foundation work, structural installations, and finishing touches.
• Conduct quality inspections and implement corrective measures to ensure compliance with project specifications and standards.
• Communicate effectively with clients, architects, engineers, and other project stakeholders to address inquiries, provide updates, and resolve issues promptly.

Requirements:

• Bachelor's degree in Civil Engineering, Construction Management, or related field.
• Proven experience in project management or construction engineering role.
• Strong knowledge of construction methods, materials, and building codes.
• Proficiency in project management software and Microsoft Office Suite.
• Excellent communication, leadership, and problem-solving skills.
• Ability to work independently and collaborate effectively in a team environment.
• Willingness to travel to project sites as needed.
• Immediate availability will be preferred

Job Descriptions:

· Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / Maintenance & Electrical Works.

· To lead a team of supervisors & workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirement.

· Liaise and hold meetings with clients, managing agent & sub-contractor to ensure that all requirements by clients and relevant authorities are adhered.

· Monitor, track, and provide timely project progress reports to the management.

· Able to handle feedback from client positively and close the loop via email

· Able to write incident report upon collecting ground information.

Job Requirements:

· Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Mechanical & Engineering (Electrical/ Electronic), project & facilities management, building services engineering, mechanical engineering or equivalent.

· Diploma holders with relevant facilities management, M&E experience are also welcome to apply.

· Good knowledge of M&E coordination.

· Electrical and ACMV design capability would be an added advantage.

· Committed, positive attitude & able to handle projects independently.

· Good team player with ability to lead and multi-task.

· At least 2 year(s) of local working experience in the related field is required for this position.

To apply, please submit your detailed CV with the following details for faster processing:

• Reason for leaving
• Expected salary
• Earliest availability date

• Assist Project Managers in project planning and project management
• Coordinate with main contractor and consultant and monitor work progress and schedule
• Liaison with supervisors/foreman and suppliers, preparation of all project costs, process project claims and monitor project budgets
• Attend site meetings and conduct site inspections
• Monitor daily work activities of the in-house workers/sub-cons to ensure proper adherence to job site safety policies and procedures.
• Monitor and inspect work progress for quality control and quality assurance; identify and resolve problem issues in a timely manner.
• Work closely with the team to fulfil all requirement and expectation during testing and commissioning with consultant.
• Preparation of construction shop-drawings and settle all connection details with consultants & architects.

Requirement:

• Candidate must possess at least a diploma in Civil Engineering
• Proficient in auto-cad
• Min 3years experience in structural steelworks trade
• Proficient with Microsoft offices and other basic computer skills

Responsibilities:

• Identify, qualify, and close new customer sales opportunities to generate sales revenues that meet or exceed assigned goals
• Conducts continuous prospecting activities and build a sales pipeline to support the achievement of sales revenue goals
• Provide professional services to current and new clients through consultative selling, cross-selling, or up-selling the company’s products and/or services.
• Establish and maintain strong and lasting relationships with clients as a trusted advisor by regularly updating them with company’s new products and/or introducing innovative solutions and providing continuing pre-sales and post-sales support in managing and meeting their expectations.
• Maintain a high degree of technical knowledge to effectively engage in business discussions with clients across industries, and to co-create feasible solutions to address any of their engineering concerns.
• Able to think critically and suggest improvements that might lead to cost savings or other client benefits.
• Develop and/or customise relevant materials and presentations that explain key product features and viable technical solutions to benefit clients and prospects.
• Manage accounts effectively throughout the sales cycle – Prospecting, Business Development, Deal Confirmation and Post-Sales Support.
• Involved in sales and marketing initiatives; seminar/ technical training workshops, marketing literature, marketing materials, events, etc
• Continuously develop production and solution knowledge, able to learn the latest market trends and competition movements
• Any other duties assigned by Supervisor

Pre-requisites:

• Degree/Diploma in any discipline
• Relevant experience preferably in kitchen/home appliances industry
• Result-oriented with proven achievements in development of accounts and good track record in sales
• Analytical with ability to influence customers
• Ability to collaborate with customers on resolution of technical issues, through internal or vendor support resources
• Excellent communications, presentation & interpersonal skills
• A team player who is meticulous and able to work independently
• Able to work in a fast-paced sales environment and multitask

The successful candidate will be based at 26 Senoko Avenue. Company shuttle bus pickup/dropoff point at Sembawang MRT station.

Remuneration will commensurate with work experience and qualifications. Interested applicants, please submit your detailed resume stating your current and expected salary, and reasons for leaving current and past employment.

We thank you for your interest in the above position and regret that only short-listed candidates will be notified.

MECHANICAL ENGINEER

Job Description & Requirements

• Identifying deficiencies in mechanical processes and developing improvements
• Designing and developing prototypes
• Analyzing and testing prototypes and each revision of a device
• Supervising the development of computer-aided design (CAD) project drawings from junior team members
• Developing, initiating and managing all phases of projects
• Preparing documentation of critical analysis and providing suggestions for correcting errors
• Collaborating with Project Managers for proper allocation and tracking of resources

Job Description

• Troubleshooting of production process and initiate process improvement activities.
• Work closely with Plant Manager & Planning Manager to ensure smooth implementation of special project assigned by Deputy Factory Manager.
• Co-ordinate with Plant Manager in the maintenance of respective plant equipment.
• Ensure smooth and safe operation in Plant operations.
• Training of operational staff.
• Investigate, identify and implement corrective actions to recurrent deviations from process norm.
• Initiate and recommend improvement to plant process.
• Plan and ensure proper implementation of plant maintenance activities.
• Liaise with external vendors and contractors where necessary.
• Assist the Plant Manager to re-verify the integrity after the maintenance of equipment.
• Perform regular plant safety inspection.
• Execute Deputy Factory Manager's instruction in the implementation of a special project.
• Issue and approve the permit to work systems.
• Conduct training to operational staff as per the department's training program.
• Ensure that all risk assessments in the workplace are established, implemented, monitored, communicated and documented according to WSH (Risk Management) requirements.
• Any other duties assigned by Deputy Factory Manager.

Requirements

• Candidate must possess at least Degree in Chemical Engineering.
• Minimum 3 years of process engineering experience in edible oils and fats industry.

Location:

Job Descriptions:

• Full in charge of Machine assembly
• Handling Electrical panel wiring and machine cable routing
• Perform machine testing
• On-site installation & commissioning
• Marine Engines, Generator Sets maintenance, servicing & troubleshooting
• Updating progress of given tasks to department head
• Ensure given tasks complete within given timeline
• Liaising with suppliers, contractors and customers on site installation job
• Documentations as per ISO and Bizsafe standards
• Maintain workshop cleanliness after daily job

Job Requirements:

• ITE or Diploma in mechanical / electrical / mechatronics engineering
• Trained and / or experienced in Petrol/Diesel Engines or Generator Sets
• 2-3 years’ experience in mechanical engineering
• Positive attitude and willingness to learn
• A strong commitment to all health and safety guidelines
• A problem-solving ability

Preferably hands-on experience in service work

Trained or experienced in Petrol/Diesel Engines or Generator Sets

Civil Engineer/ Site Engineer

$3500 - $4800

5.5 days

Near Bukit Merah

Job Description:

• Collaborate with the Project Manager to supervise site activities and ensure adherence to project specifications.
• Coordinate effectively with internal departments, clients, consultants, and subcontractors to ensure smooth project execution.
• Liaise with consultants, contractors, and authorities on project-related matters, maintaining strong professional relationships.
• Utilize your technical expertise to provide valuable insights and solutions for project challenges.
• Any Ad-hoc duties assigned by the superior.

Requirements

• Bachelor's degree in Civil Engineering (Recognised By the Professional Engineers Board, Singapore)
• Prior experience in the construction of general building projects is preferred.
• Preferably a minimum of 3-5 years of experience in a similar capacity, specifically in construction projects within Singapore.
• Strong initiative and excellent analytical skills to identify and resolve issues efficiently.
• Proficiency in software such as AutoCAD, 3D BIM, and Microsoft software

Job Description:

1. Plan and Supervise M&E works and ensure works are carried out accordingly to drawings, specifications and method statement.
2. Provide technical support on M&E system matters including troubleshooting to resolve M&E faults.
3. Provide supervision and management of vendors, contractors and technicians for progress of work and coordination with clients’ representatives on technical matters.
4. Plan, prepare and manage preventive maintenance and corrective maintenance of M&E equipment and systems.
5. Ability to lead a team of technicians for installation and/or maintenance of M&E equipment.
6. Ensure all works carried out safely and in compliance to ISO and safety procedures.
7. Ensure all project/maintenance works completed on time.
8. Assist the manager to prepare costings and quotations for tenders and ad-hoc works.
9. Billing submission and ensure collection of payments from clients.
10. Prepare proposals, reports and documentations for submission to clients etc.
11. Build rapport with clients leading to business growth and new opportunities.
12. Able to look for and prospect new clients for business growth.
13. Any other ad-hoc duties as assigned whenever required.

Requirements:

1. 2 years relevant experience in installation and/or maintenance of M&E services
2. Degree or Diploma on Electrical/Mechanical or relevant Engineering discipline
3. Goal oriented and organized leadership to lead a team of technicians
4. Good knowledge on Mechanical and/or Electrical System
5. Able to use MS office e.g., Word, Excel, Project and PowerPoint
6. Good planning skills and able to work independently
7. Open to fresh graduates

• Leading innovative and strategic solutions to enhance frontend manufacturing processes, improve product yield and quality.
• Leverage transformative technologies including but not limited to advanced modeling, process simulation/emulation, advanced data analytics, smart manufacturing and AI techniques, to identify area of improvement and prescribe solutions with model-based problem solving process;
• Leading with cross-functional teams, including but not limited to PI, YE, PEE, RAM and SMAI teams, to design and implement solutions aimed at optimizing yield and reducing defect;
• Leading strategic roadmap design and implementation plan with suppliers;
• This role requires in-depth expertise in frontend process technologies, as well as strong focus on research and development to stay ahead of industry trends and drive continuous improvement in yield and quality.
• In-depth knowledge in semiconductor frontend processes and integration, design and testing
• Proficiency in design of experiments, advanced data analytics and visualization
• Hands-on skill on scientific programming languages e.g. Python, MATLAB, R is bonus
• Excellent oral and written communication skills
• Able to work independently or with a cross functional team
• Good organization skills. Ability to plan and prioritize
• Self-motivation and strong willingness for continuous improvement

Job Description & Requirements

We are seeking a highly motivated and skilled Civil Engineer to join our team. As a Civil Engineer, you will play a crucial role in overseeing site supervision works and coordinating with various stakeholders to ensure project success. If you have a strong background in construction, excellent analytical skills, and a passion for delivering high-quality projects, we want to hear from you.

Responsibilities:

- Collaborate with the Project Manager to supervise site activities and ensure adherence to project specifications.

- Coordinate effectively with internal departments, clients, consultants, and subcontractors to ensure smooth project execution.

- Liaise with consultants, contractors, and authorities on project-related matters, maintaining strong professional relationships.

- Utilize your technical expertise to provide valuable insights and solutions for project challenges.

Requirement

- Bachelor's degree in Civil Engineering (Recognised By Professional Engineers Board, Singapore)

- Prior experience in the construction of general building projects is preferred.

- Minimum 5 years of experience in a similar capacity, specifically in construction projects within Singapore.

- Strong initiative and excellent analytical skills to identify and resolve issues efficiently.

- Proficiency in software such as AutoCAD, 3D BIM, and Microsoft Works.

- Salary range: $4.5K - $4.8K.

Join our dynamic team and contribute to the successful completion of prestigious projects. Apply now and take the next step in your career as a Civil Engineer.

Position: Civil Engineer

We are seeking a highly motivated and skilled Civil Engineer to join our team. As a Civil Engineer, you will play a crucial role in overseeing site supervision works and coordinating with various stakeholders to ensure project success. If you have a strong background in construction, excellent analytical skills, and a passion for delivering high-quality projects, we want to hear from you.

Responsibilities:

- Collaborate with the Project Manager to supervise site activities and ensure adherence to project specifications.

- Coordinate effectively with internal departments, clients, consultants, and subcontractors to ensure smooth project execution.

- Liaise with consultants, contractors, and authorities on project-related matters, maintaining strong professional relationships.

- Utilize your technical expertise to provide valuable insights and solutions for project challenges.

Requirements:

- Bachelor's degree in Civil Engineering (Recognised By Professional Engineers Board, Singapore)

- Prior experience in the construction of general building projects is preferred.

- Minimum 5 years of experience in a similar capacity, specifically in construction projects within Singapore.

- Strong initiative and excellent analytical skills to identify and resolve issues efficiently.

- Proficiency in software such as AutoCAD, 3D BIM, and Microsoft Works.

- Salary range: $4.5K - $4.8K.

Join our dynamic team and contribute to the successful completion of prestigious projects. Apply now and take the next step in your career as a Civil Engineer.

*** ACMV Site Engineer Able to carry out testing & commissioning and basic troubling shooting of the system. Ensure project complete within the time line. Day to day site co-ordinations with main con, sub-contractors. Prepare, plan and request site inspection with main con or RTO. Ensure the allocation of resources as planned and submit daily work progress and manpower forecast report. Monitor and request for equipment, material delivery. Ensure equipment, material and site work compliance to specifications. Filing and recording of project documentation. Preparation, submission and obtain approval of MOS, RA, SWP, shop drawings, material, equipment, RFA, RFI etc. Attend technical meeting, daily site progress meeting and safety meetings. Preparation of OMM manual, As-Built drawings, training and DLP program. Knowledge and adherence of WSH, ESH standard. 6 Work Week Able to use AutoCAD 2D

Job Responsibilities

• Carry out credit check activity according to Company’s Credit process, recording outcomes accurately and in a timely manner

• Manages and resolves customer disputes to ensure invoices are paid on time and in full

• Locates and monitors overdue accounts, using computers and a variety of automated systems

• Persuades customers to pay amounts due, arranging debt repayment schedules as per authority level and based on customers' financial situations, agreeing extension to credit terms within own authority level or escalating as needed

• Records information about financial status of customers and status of collection efforts

• Sorts and files correspondence and perform miscellaneous clerical duties, such as answering correspondence, writing reports and maintaining system data

• Locates and notifies customers of delinquent accounts by mail or telephone, as per specified process identifying the reason(s) for any overdue payment and to review / confirm the terms of sales, credit or service agreements

• Identifies and answers customer questions regarding problems with their accounts and advise customers of necessary actions and strategies for debt repayment

• Manages own workload ensuring all performance measures and SLAs are met

• This list is not exhaustive; other duties may be required, as assigned by manager.

Job Requirements:

· Degree in Accounting/Finance/Business or related disciplines with minimum 2 years of experience in credit control or related experience.

· Outstanding attention to detail with an ability to reconcile complex account.

· Proven experience of managing multi-currency sales ledgers.

· Proven record of delivering effective credit control, with minimal supervision, whilst adhering to strict deadlines.

· Ability to proactively resolve day-to-day operational issues and to effect process improvements.

· Dynamic, positive attitute with an interest to provide high quality of service to internal and external customers.

· High level IT capabilities including Microsoft Office, in particular Excel and PowerPoint.

· Ability to meet deadlines through good time management and allocation of priorities.

Job Responsibilities:

• Scheduling of installation, co-ordination with customers, internally, PE, LEW and vendors, seeking approval of installation from tenants of building, accurate and timely submission of documents, etc
• Coordination work with Customers, Building Owner/Management
• To be responsible for the Implementation Activities such as preparation of proposal and submission of design, obtaining of approval, monitoring of in-house team and contractors’ work schedule and BOQ claims, I&C and using measurement tools for troubleshooting.
• Generate project documentation such as survey report/technical proposal/As-built report
• Manage weekly report tracker update and report to project manager.
• Submission of project documentation to client
• Generate project documents templates
• Prepare TP / As-Built reports
• Conduct documentation control training

Job Requirements:

• Diploma / ITE in Engineering, either in the area of communications or RF Wireless Communications
• At least 2 years of relevant experience in telecom wireless industry
• Basic RF (Radio Frequency) / Telecommunication knowledge
• Ability to operate, analyze, test and read measurements in Radio Frequency and able to use TEMS / Nemo / Site Master is essential
• Basic M&E (Electrical and Mechanical) Knowledge
• Basic cellular network communications knowledge, configuration and operations
• To perform project coordination and control duties and auditing, etc
• Able to commission / integrate / troubleshoot / test Ericsson equipment is an added advantage
• Good team work and interpersonal skills
• Hands-on knowledge on autocad drawing is an added advantage
• Good command of English
• Preferably Singaporean

Job Summary

The Senior / Sales Engineer is mainly responsible for executing sales & marketing initiatives, engaging new customers and maintaining the relationship with existing accounts in order to bring in revenue for the Precision Robotics Business Group.

Job Responsibilities

To achieve and/or exceed sales and profit margin targets in assigned growth location/segment/customers, key responsibilities include (not limited to):

• Development of sales strategy and implementation of tactical plan.
• Identification of key/target accounts/industry segment.
• Building and maintaining a healthy sales pipeline, through prompt updating of opportunities management tracking and account development planning.
• Develop new customer accounts through sales and marketing activities.
• Expand sales portfolio to all existing and new potential customers.
• Supporting any marketing related activities to improve the presence and customer knowledge of our Precision Robotic Products
• Providing customer feedback to the Research and Development team and Business Group management.
• Any other duties as assigned by supervisor.

People Requirements

• Minimum 2 years of sales experience with Industrial clients (i.e. B2B), 5 years of experience is needed for the senior position.
• Prior experience in the automation or robotics industry is preferred.
• Diploma or Bachelor Degree in Engineering / Computer Science or Equivalent
• Field sales experience is vital. Proven ability to interact directly with a sales organization, understand customer needs and influence them.
• Good interpersonal and communication skills
• Self-motivated and maintain high level of Sales Discipline

Job Info:

• Work in a cleanroom environment for long hours
• Working Hour: 12 hours shift (09:00am/pm - 09:00pm/am), work 4days off 3days/work 3days off 4days
• Location: Woodlands

Responsibilities

• Perform scheduled equipment PM (preventive maintenance) and calibration.
• Co-work with Engineer to perform CM (corrective maintenance) by troubleshooting hardware related issues. Calibration and parts replacement needed to correct issues.
• Communicates with engineers, peer specialist or external vendors to resolve problems and to provide advanced training to less experienced colleagues.
• Other ad-hoc relating duties as assigned from time to time.

Requirements

· Diploma or ITE in Electrical, Electronics, Mechanical, Materials or Engineering related field

• Strong analytical skills with excellent problem-solving skills
• Good working attitude and willing to learn

communication & Inter-Personal skill

Working experience in semiconductor manufacturing cleanroom environment

• Able to work 12 hour rotating shifts. Day shift and night shift every 2-3 months

Benefits

1. Shift allowance for both day shift and night shift.
2. Medical claim coverage
3. AWS bonus will be awarded upon completion 12 mths contract
4. VB will be awarded based on individual performance

About the Job:

As an engineer in our R&D hardware design team, you will collaborate with manufacturing and engineering teams to design and implement client’s state of the art measurement and calibration procedures and perform analyses to set specifications for all new products during development. You will have engineering responsibility for the product design as it is released into production and beyond. This is your opportunity to join a team that's bringing new products and technologies to the market faster and more efficiently than ever before!

About the Team:

Our R&D teams are multi-disciplinary, involving electrical, software, and mechanical engineers. You will be part of a product development team that collaborates closely with cross functional teams to design, develop, and test our new electronic circuit cards and maintain existing products for measurement in ICT platform.

Responsibilities:

• Develop and maintain FPGA designs using hardware description languages (HDLs) such as VHDL or Verilog, ensuring they meet the functional and performance requirements.
• Collaborate with system architects to define the system architecture and determine how the FPGA will interface with other components on the PCA board and choose an appropriate FPGA based on the project's requirements.
• Implement high-speed interfaces, such as DDR memory interfaces or high-speed data communication protocols, on the FPGA.
• Implement signal processing algorithms, both analog and digital, on the FPGA to process and analyze data from test and measurement sensors.
• Develop testbenches and perform simulation to verify the FPGA design. Conduct functional, timing, and performance tests on the PCA board to ensure it meets specifications.
• Use FPGA development tools to synthesize and implement the design onto the FPGA, considering resource utilization and timing constraints.
• Collaborate with PCB designers to ensure proper integration of the FPGA into the PCA board layout, taking into account signal integrity and power distribution.
• Implement calibration routines and algorithms to maintain the accuracy and reliability of measurement data.
• Develop algorithms for real-time data processing, including filtering, averaging, and statistical analysis.
• Collaborate with a team to test, validate, and debug analog and power circuits.

· Expertise in analog and power circuit design, along with schematic creation and PCB layout, to develop tailored solutions according to project requirements is an added advantage for this role.

Basic Qualifications:

· Bachelor/Master/PhD Degree in Computer Engineering or Electrical/Electronic engineering.

· Min 5 years working experience in R&D or similar product generation environment as electronic and FPGA firmware engineer.

• Strong proficiency in digital circuit design and FPGA firmware design.
• Extensive experience in reading and understanding electrical schematics, technical drawings, datasheets, and written work instructions.
• In-depth knowledge and experience in developing, testing and trouble-shooting circuit and FPGA firmware design.
• Good organizational skills and ability to thrive in a fast-paced, results-driven environment.
• Hands-on experience of lab-based debugging and validation of circuits.
• Self-motivated and capable of working independently while following high-level objectives.
• Demonstrated analytical problem-solving skills and excellent communication abilities.
• Proficiency in coding, synthesizing, and simulating VHDL and Verilog RTL implementations using Xilinx FPGA.

Desired Qualifications:

• Knowledge of general communication protocols, such as I2C, SPI, JTAG, UART.
• Familiarity with analog and digital test and measurement techniques.
• Experienced in using electronic test and measurement equipment for validating both analog and digital circuits.
• Experienced in design using Xilinx Spartan 7 FPGA and Intel FPGA Cyclone V SoC would be advantageous.
• Proficiency in FPGA firmware CAD design tools Vivado and Quartus.
• Proficiency in electronic circuit CAD design tools DxDesigner/Expedition.
• Understanding of hardware, firmware, and software/hardware interactions is highly desired.