Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)
• Reports to Principal Welding and NDT Engineer

Job description

• Good knowledge of network technologies and products, including Cisco routers and switches, Nexus, Checkpoint, Cisco Firepower, ASA, and Fortinet Firewalls; IPSec VPN, and Remote VPN.
• Solid understanding of the OSI and TCP/IP models.
• Hands-on experience in network security devices in Data centre environment.
• Advanced troubleshooting skills, along with strong customer management and communication abilities.
• Good understanding about private, public and hybrid cloud environment.
• Comprehensive knowledge of network infrastructure and applications, including Active Directory(AD), ADFS, and Azure AD.
• Good understanding of AWS, OCI and Azure cloud-based solutions.
• Good to have experience in Aruba or Cisco wireless technologies.
• Good to have experience with load balancers, such as F5 and Forti ADC.
• Experience with cloud proxies, such as MWG and Netskope, and Bluecoat proxy or reverse proxy solutions.
• Knowledge of Secure Access Service Edge (SASE) or Zero Trust Network Access (ZTNA) is a plus.
• Relevant industry certifications such as CCNP or higher, AWS or Azure certifications are required.

Technical certifications: CCNP, CCIE, CheckPoint

Good to have

• Knowledge on VMware vSphere and NSX is a big plus point
• Experience in load balancers, reverse proxy, VPN setup, DNS
• exposure to TACACS+, Radius, and Cisco Access Control System
• Perform maintenance and upgrades of systems and networks

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.

• Able to liaise with consultants and subcontractors.

• Able to work independently and as a key member of the Site Management.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.

• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.

• Ensure all works are carried out within schedule and maintain the required quality.

• Ensure work safe environment at the work site and manage workers.

• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.

• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.

• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

• Responsible for general on-site technical and engineering matters.

• Quality Control.

• Co-ordination of works with subcontractors.

• Liaise with the consultants on technical and quality issues.

• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent

• Required skill(s): MS Office, preferable candidate with AutoCad skills

• Minimum 3 years Site/Working Experience

. Expereince with LTA Projects is preferable

Job Responsibilities

• Perform engineering design, calculations and analysis
• Check and review purchase specification
• Review and correct drawings
• Prepare test procedures
• Review vendor quotations and vendor drawings
• Handle contract-bidding engineering specifications and enquiry
• Monitor the progress of drawings, documents and purchase specification
• Perform quality assurance check of drawings
• Seek innovative ideas / solutions to improve current designs, work methods and procedures
• Liaise with Production Department to resolve site problems
• Liaise with Project Management Department to ensure on-time delivery of project
• Liaise with Marketing Department on engineering specifications for project bidding
• Liaise with customer, vendors and regulatory bodies on engineering design matters
• Direct and guide the activities of subordinates assigned to him
• Manage the career development and training of subordinates

Job Requirements

• At least 5 years of relevant working experience, preferably in marine / offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels or platforms
• In-depth knowledge and experience of his engineering field
• Well versed with regulatory and class requirements
• Possess effective communication and people skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (eg Autocad or SmartMarine 3D)
• Fresh graduates are welcome to apply

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

Admiralty Road West, Singapore 759956

(Transport provided from Sembawang MRT)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are looking for a Senior Instrument Engineer to join our Automation & Control team in Singapore. In this role, the key responsibility is to lead and deliver the instrument engineering scope, working and collaborating in a global, multi-disciplinary project team environment. This role reports to the Principal Lead, Instrument Engineering in Automation & Control division.

Responsibilities

• Responsible to lead the project or package in Instrument discipline.
• Deliver instrument engineering solutions according to the project specification, class rules and regulations within budget.
• Responsible for Client/Vendor technical inputs, interfaces, meetings, technical clarifications, etc.
• Responsible for design review and vendor document review.
• Responsible for delivery of Instrument Engineering documents as per Master Document Register.
• Monitor progress of associated design team and generate progress reports.
• Develop instrument engineering analysis, drawings and documentation.
• Review / prepare block diagrams, termination and loop diagrams, Instrument Index, instrument hook-up and mounting details, instrument layouts, control room layouts, I/O schedule, cable schedule, instrument tagging, and other engineering related documents.
• Review / prepare IS Calculation / SIL Verification document.
• Review / prepare Cause & Effect diagram, Fire & Gas detection layouts, safety engineering and loop schematics.
• Responsible for design work to support interface requirements with electrical, telecom systems and other third-party equipment related to the instrument & automation packages and to provide tailor made solution with cost effectiveness.
• Responsible for adherence to the QHSE requirements with respect to design and delivery of engineering deliverables (i.e. within budget, quality & planned timeframe).
• Responsible for class approval of project related documents, communication with client/regulatory bodies, as project demands.
• Communicate with ICSS project team globally related to product engineering.
• Any other associated tasks and responsibilities assigned from time to time

Qualifications and experience

• Bachelor’s or Master’s degree in Electrical / Instrumentation / Electronics & Communication Engineering
• 5-8 years of relevant experience in Marine / Offshore / Oil & Gas industry projects with proven track record in handling or leading the Instrument packages
• Working experience in design and engineering team for conceptual studies, FEED & EPC phases for topsides & marine systems for an FPSO project or similar offshore projects
• Excellent knowledge of instrumentation, safety system engineering, including DCS/PLC based control system and field instrumentation for marine and offshore
• Experience in AutoCAD, MS Office (Word, Excel), Tools
• Familiar with SOLAS, offshore standards and classification society rules and requirements
• Experience with Kongsberg Automation & Safety (ICSS) system is an added advantage

Only shortlisted candidates will be notified for interview.

Interested applicants, please apply via https://www.kongsberg.com/careers/vacancies/senior-instrument-engineer/

Job Description

• Assist Engineer/Manager in the procurement of parts/components, i.e., from Request for Sourcing/Quote (RFS/Q), prepare Evaluation Report (ER) and perform Goods Acceptance (GA).

Requirements

• Higher Nitec / Diploma in Electronic or Electrical Engineering

• 2+ years of relevant industry experience

• Ability to read and interpret technical/product datasheet, safety datasheet, technical drawings and schematics

• Computer literate with Microsoft Word and Excel

• Attention to detail

• Excellent communication skills

• Open to Singaporeans only

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

Working Hours

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Lunch: 1 hour

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

Customer support is seeking a field service engineer for supporting our regional as well as worldwide customers. The ideal candidate is one having experience on both Integrated Control Monitoring System (ICMS) as well as propulsion/steering control systems. Hands-on service or operational experience on the main engine and thrusters is an added advantage.

The role also involves providing the onboard services, commissioning of refit and retrofit projects, remote guidance/product support to our customers as well as being part of a knowledge pool giving backend support for the field service team.

Responsibilities:

• Focus on customer support, commissioning and service on assigned Kongsberg Maritime Merchant & Automation product range
• Cover service activities in South East Asia and maintain good relationship with existing clients
• Workshop test and technical preparations
• Proper preparation and execution of work assigned and ensure performance are met at all times
• Responsible for generation of service reports, update drawings, cable information database and other relevant documents
• Provides remote guidance / product support to customers, commission and project management of refit/retrofit projects and backend support to the service team
• Assist our sales department with technical issues
• Handles pre and post administrative work
• Required to undertake ad-hoc duties which may be assigned from time to time.

Requirements

• Minimum Diploma or Degree in Electronics /Electrical/ Instrumentation
• Minimum 3 to 5 years of related field experience in Alarm Monitoring and Control System as well as the good knowledge of computer hardware/peripherals and basic software’s
• Experience onboard ship for automation systems (controls and propulsion), system process knowledge, distributed control systems and power management
• Relevant working experience in maritime industry
• Must have excellent co-operative skills, good communication skills, result-oriented, self-motivated and the project-management skill
• Meticulous & methodical approach to remote case handling
• Self-driven attitude to find solutions to problems.
• Passion and patience for handling customers – Service oriented
• Ability to work independently
• Able to travel overseas on short notice
• Pay package will be commensurate with experience

JOB SUMMARY

As a Proposal Engineer I, you will play a key role within a team selling model by supporting the preparation and submission of technical and commercial proposals for prospective projects. This position involves collaborating with various functions and departments to gather information, analyze customer requirements, and develop compelling proposals that align with company capabilities and client expectations. The Proposal Engineer I assists in the growth of business opportunities through effective proposal management and ensuring the completeness and accuracy of proposals.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• With close involvement from Commercial and Technical Leads, analyze customer Requests for Proposals (RFPs) and technical specifications to understand project requirements.

• Prepare cost estimates, technical and commercial proposals, and related documentation in response to customer inquiries.

• Collaborate with sales, engineering, and procurement teams to gather necessary information for proposal development.

• Assist in the review and editing of proposal content to ensure clarity, compliance, and alignment with customer needs.

• Maintain proposal templates, pricing databases, and other relevant documentation.

• Support proposal review meetings and participate in internal Contract Scorecard Reviews

• Track and report on proposal status and outcomes to facilitate continuous improvement.

• Perform other related duties as required and assigned.

• Some examples could include supporting new Innovation Center Piloting runs or commercial plant start-ups to aid in personal development and provide a real world connection to the solutions you are supporting/selling.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in Engineering, Business Administration, or a related field.

• Strong technical aptitude and ability to interpret complex technical requirements.

• Excellent communication and interpersonal skills.

• Ability to prioritize tasks and manage multiple deadlines effectively.

• Detail-oriented with strong organizational skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, and PowerPoint, SharePoint.

• SAP and Salesforce experience a plus.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevSecOps Engineer

Internal Code:

What will you do?

Part of the project Enterprise Information Management team to take on the exciting and challenging role of delivering and maintaining an agency-wide data warehouse and analytics project using AGILE software development methodology.

• Maintain the organisation’s data warehouse and analytics platforms on both on-premise data centre as well as on cloud.
• Develop automation code for testing and deployment using Azure DevOps, Git and various testing tools for the data platforms.
• Liaise with both vender and inhouse team on data warehouse and analytics development platform including SQL databases, MS Sharepoint, Power BI, Tableau, Aurora PostgresSQL and Machine Learning applications on agency data centre.
• Perform automated deployments to existing or new infrastructure environments
• Build continuous integration and delivery pipeline for applications.
• Provide production support and operation for the system during office hours or as and when required after office hours or on weekends for scheduled maintenance and deployments.
• Work with the team to support existing system and integration of new components in the system.
• Maintain existing infrastructure which includes Windows-based servers, SQL databases, Power BI, Sharepoint, SQL Server Integration Services (SSIS), and Machine Learning Server.
• Plan, design, build and maintain development environment which includes SSIS, .net, Visual basic, SSMS, etc.
• Liaise with 3rd party software, hardware and application vendors to manage and resolve incidents and technical issues.

What are we looking for?

• Tertiary Education in relevant fields is preferred.
• Hands on experience in setting up and maintaining CI/CD platform, such as Azure DevOps, Git/Github or other related CI/CD tools.
• Hands on experience in writing automation scripts for automated deployment for ETL packages, database tables, and analytics programs using R and Python.
• Hands on experience in design, implementation, administration and support of data platforms such as SQL and Aurora Postgres database. Related certifications will be an advantage.
• Hands on experience in setting up and maintaining a data warehouse/lake solution on the cloud and in a data centre.
• Hands on experience in supporting Microsoft technologies, preferably for Business Intelligence and data management using tools such as Microsoft SQL SSIS, Power BI, R, SharePoint.

• Experience in one or more of the following:

a) Building CI/CD pipeline using Azure DevOps, Bamboo, Bitbucket, Sonarqube, Fortify and Nexus

b) Building data pipelines using Python, AWS Glue, AWS Lambda, SQL Server Integration Services (SSIS)

c) Unix scripts for secure file transfers

d) Data security

e) Secure code review, Automated Testing

f) Big Data platform, AWS S3

g) Maintaining visualisation tools such as Power BI or Tableau, and Machine Learning applications

h) Server Virtualisation (VMWare VSphere family of products) and container technology

i) Data Virtualisation technology

j) Agile continuous integration tools

• Good team player.
• Passionate in championing the team to continuously improve and deliver quality software product.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Description of the Role:

The Service Sales / Project executive / Engineer MUST at all times maintain confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of the Senior Manager and or management.

Key Tasks:

· To assist the Sales / Service Manager / Assistant Manager in developing, review, and execute service sales plans to generate new business with new accounts.

· To follow up on any request for site visit and capture ALL necessary information related to follow up on the sales / tender.

· Conduct cold calls, site visits and customer integration.

· Provide quotations and submit proposals to customers on a timely basis.

· To carry out costing for review of profitability of each customer’s account and develop plans to improve margins. (Have to understand the market trends)

· To follow up on the sales strategy – collaborate in the setting & delivery of business plans to achieve sales targets.

· Follow-up on all sales inquiries, tender and RFQ.

· Ensure that all customer issues relating to customer service, service recovery and credit control are coordinated and update the Sales Manager / Assistant Sales Manager

· Prospecting and developing business across country.

· Analyse competition landscape, market trends and customers’ expectations and plan for strategic and tactical actions.

· “One Face to the Customer “over the entire Service Sales & Execution timeline. This includes all pre sales activities including contract signature until final Servicing and customer handover of generator set

· Coordinates with the purchasing team and the needed supply chain, lead times and cost for project relevant key components that need to be sourced locally. Updating the database regularly to ensure that ALL information on parts/materials and customer’s information.

· To follow up on ALL requirements on documentations submission when running projects / submission of tenders and have them updated.

· Coordinate with the operations team when required on issues for follow up

To follow up as directed and coordinate all post sales activities as part of the maintenance schedule plan, which starts from

Requirements:

Education

· Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in any field.

Knowledge / Experience / Others

· At least 1 years of working experience in Power Generation industry.

· Successful previous experience as a sales representative or sales manager, consistently meeting or exceeding targets.

· Demonstrate ability to communicate, present and influence credibly and effectively at all levels of the organization.

· Possess strong hunter mentality, business sense and industry expertise.

· Personal competencies.

· Driving license is preferable.

· Excellent communication, sales, and customer service skills.

Provide excellent customer service.
Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
Support on desktops, notebooks, printers, scanners hardware components.
Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
Installation of Apple IPad software’s.
Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.
Printer Maintenance.
Take on and resolve complex calls or tasks the other engineers could not resolve.
Responsible for learning and working independently.
Responsible for providing excellent support and timely service

• Good to have At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.
• Hardware Skill – Desktop, Laptop, Printer and Scanner
• Comfortable in working Healthcare/Hospital Environment
• Windows OS (Strong Windows 10)
• Working 5.5 Days

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team.
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs).
• Support the review and revision of design document, wherever required.
• Liaise with identified stake holders, including suppliers/contractors.
• Provide SME input wherever required.
• Manage the assigned system handover.
• Support the management of project schedule.
• Compliant to quality and safety requirements.
• Complete trainings in a timely manner.
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Qualifications

• Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices. • Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail.
• Proficient presentation and facilitation skill is a plus.

EA Reg. No : R2094147 EA License No : 19C9587

General

• Responsible for all mechanical related technical solution engineering for major Data Center Projects in APAC.
• Develop and manage complete scope from initiation to onsite delivery of mechanical systems related to the diesel genset enclosure.

Tendering Matters

• Work closely with sales to define the technical scope (mechanical).
• Review/clarify customer’s specifications & tender documents.
• Review and finalize the C/D/E document.
• Provide the technical specifications and define the scope of supply for the equipment.
• Coordinate with factory and local suppliers to harmonize the scope of supply.
• Work with suppliers/contractors to quote for the equipment and obtain proposals timely.

Solution Engineering Matters

• Define the mechanical systems requirements for the walk in genset enclosures suitable for the project needs.
• Provide the design and prepares the drawings and documents for the customer’s technical requirements.
• Calculate, verify, and select the right equipment/suppliers.
• Uses the computerized engineering tools/database, technical library information and factory standards for the solution engineering work.
• Provide and maintain the product and solution engineering information.
• Prepare and carry out technical presentations and training.

Order Execution

• Verify and confirm the shop drawings, P&ID, datasheets, and similar technical documents to ensure customer specification compliance.
• Finalize equipment scope and specifications. Collaborate with internal departments to procure the equipment.
• Raise the purchase requisitions for the scope of supply.
• Support the execution team to resolve technical issue related to the mechanical systems during project execution, from packaging to site related.
• Participate in design review and lessons learnt sessions. Proactively provide valuable insights and recommendation to enhance system performance and efficiency.

​Other Matters

• Update oneself with the technical developments of the market and internal products.
• Travel overseas on business, when required.
• Special assignment from time to time.

Qualifications and Skills:​

• University / college studies in Mechanical engineering.
• Proven experience in the diesel engine/generator industry, min. 5 years with track record of successfully delivered projects and solutions.
• Solid understanding of Cooling system, Fuel system, Ventilation system of a diesel generator set and demonstrate the ability to integrate the understanding into designing a genset enclosure.
• Knowledge of engineering calculation for genset mechanical systems, for e.g., sizing calculation.
• Demonstrating the ability to conceptualize and execute complex mechanical designs and bring cost benefit to the customer.
• Knowledge of data centers, switchgear and electrical power protection would be an added advantage.
• Understanding of Asian cultures and business practices.
• Excellent team player with an open mindset, collaborative spirit, and exceptional communication skills, capable of effectively engaging with diverse teams and stakeholders to achieve common goals.
• Willingness to travel for onsite jobs when needed, demonstrating flexibility and adaptability to meet project requirements and deadlines effectively.
• Proactive and positive attitude.
• Proficient in 2D/3D CAD software.
• Proficient in English language.

What is the Job all about?

Development and improvement of manufacturing processes in a water pump manufacturing plant. This is to be carried out by understanding both the product and manufacturing methods, in order to effectively apply this knowledge to the Shopfloor.

This role will be directly reporting to the Regional Head for Operations , and to be based in Singapore.

Your main responsibilities:

• Develops manufacturing processes by studying product requirements, researching, designing, modifying, and testing manufacturing methods and equipment while also conferring with equipment vendors.
• Evaluates manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling, and materials and effectively understanding observations from operators.
• Assures product and process quality by designing testing methods, testing finished product and process capabilities, establishing standards and confirming manufacturing processes.
• Prepares product and process reports by collecting, analyzing, and summarizing information and trends.
• Maintains processes data base by keeping SAP registries up to date.
• Contributes to team effort by accomplishing related results as needed.
• Be the reference point for engineering change management in the plant, implementing the requirements and policy making of such changing, evaluating their impact in cost and delivery before proceeding.
• Be a reference point for other ME engineers in the plant, coaching them wherever is required.

Your background:

• Degree in Engineering, Mechanical, Electrical, Industrial or equivalent.
• Understanding of Lean Manufacturing concepts in order to implement them in the Shopfloor.
• 6-8 years of relevant experience is required for this role.
• Ability to find the best to nonlinear problems with multiple alternatives.
• Electrical knowledge (PLCs) would be preferred,
• Strong engineering foundations to assess and propose feasible solutions to problems.
• Good communication abilities to be able to understand requirements and negotiate solutions with stakeholders.
• Possess good initiative and able to work effectively to find solutions to the problems on your own.
• Capable of questioning the status quo to think of better ways to carry out the daily activities and processes.

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Proficio is an award-winning managed detection and response (MDR) services provider. We provide 24/7 security monitoring, investigation, alerting and response services to organizations in healthcare, financial services, manufacturing, retail and other industries. Take a video tour of our global network of 24/7 Security Operations Centers (SOCs).

 Proficio has been highlighted in Gartner’s Market Guide for Managed Detection and Response Services for the last five consecutive years. MSSP Alert ranks Proficio among the top 250 global Managed Security Services Providers (MSSPs).

 We have a track record of innovation. Proficio invented the concept of SOC-as-a-Service. We were the first MSSP to provide automated response services and are the only company in our space with a patent for cyber risk scoring and security posture gap analysis.

 Our typical client is a medium to large-sized organization that lacks the in-house resources to address the challenges of a rapidly changing threat landscape. The difficulty of hiring and retaining cybersecurity professionals are widely understood. Our prospective clients are also challenged to effectively harness technology and build hardened processes that reduce the risk of security breaches.

 While Proficio has developed a unified service delivery platform designed to meet the needs of the most demanding clients, what sets us apart is the quality and passion of our people. We believe the SOC of the Future will meld the creativity of human intelligence with the power of advanced technologies like AI.

 Proficio’s commitment to developing and promoting our team members is unparalleled in our industry. Most of our senior managers were promoted from within.

 SUMMARY

We are seeking an energetic Security Engineer II to serve as a technical resource and leader. This position has two components and supports both our team that Onboards new customers and our MSS team that manages security devices for our customers. 

Onboarding, 60% of this role:  this part of the position centers on security and availability of customer data as it is brought into the Proficio SIEM. The Security Engineer II will assist in working with new clients as they transition to our ProSOC service. This includes ensuring timely deployment of services, developing a personalized on-boarding strategy for each customer and auditing of systems reporting from the client to our Security Operation Center. 

MSS device configuration/maintenance, 40% of this role:  this part of the position will help ensure delivery of our Elastic Stack Managed Security Services to meet or exceed the defined service levels of our clients. The Security Engineer II will respond to customer requests and act as a trusted technical resource for our clients while striving to maintain high reliability and performance within our customer’s environments. This position also includes managing and optimizing overall IT infrastructure and systems used in the delivery of our Managed Security Services.

 Responsibilities

• Assist in the onboarding and implementation of ProSOC service and Managed Security Services solutions for Proficio clients across industries and geographic locations. 
• Act as a technical liaison between Proficio and its customers during the onboarding process.
• Review technical security posture (network, application, and database) for existing and newly acquired businesses or services.
• Perform security reviews and monitoring of the production environment. 
• Perform the installation and configuration of security monitoring tools in support of our ProSOC service.
• Use out of the box thinking as well as industry standard troubleshooting tools, such as, Wireshark, TCPDUMP, and other tools, to facilitate on-boarding of customer data sources.
• Work with senior staff to evaluate client security devices and make recommendations based on industry standards for security configurations.
• Assist Proficio engineering team with tasks related to the review and development of Managed Security Services related processes and procedures.
• Assist senior staff when they provide Subject Matter Expert (SME) services, engaging directly with clients to perform necessary research, answering questions and making recommendations based on industry standards and best practices.
• Participate in engineering team on-call rotation.

• A Bachelor’s degree in Information Systems, Business, Engineering, or a related field from an accredited institution OR equivalent experience
• 4-5+ years’ experience as a Network Engineer or Security Engineer working with a broad range of technologies
• Minimum 2+ years’ experience in Information Technology IT Security in a SOC or NOC environment working with a broad range of technologies highly preferred.
• Security certification required, such as, Security+ and Network+. Security certification such as SANS/GIAC, CISSP, CISA, CISM are a plus
• Basic Unix or Linux systems administration and command-line experience (Redhat/Linux, FreeBSD, Ubuntu, etc.).
• Experience with Windows Server security logs.
• Experience in the configuration and troubleshooting of IPSec VPN tunnels.
• Knowledge of network analysis tools, such as, Wireshark and TCPDump and SCP.

• Knowledge of UNIX and Windows environments as may pertain to Network and Security tasks including syslog, DNS, load balancers and BIND, BigIP command line on BSD, Windows Event Log.
• Hands-on experience installing, configuring and administering network and security devices, applications and systems
• General understanding of SIEM operations experience with Elasticsearch is a strong plus
• Managed Services experience preferred with a customer focused mindset that is willing to go above and beyond to satisfy a customer requirement absolutely required
• Experience performing vulnerability assessment and remediation using products such as Qualys, Nexpose or Nessus is a plus
• Proficient with Linux (scripting in Bash or Perl is required and Python is a plus)
• Vendor certifications from Palo Alto, Cisco, Juniper etc. are a plus
• Effective time task management skills.
• Strong communications skills, both written and oral
• Ability to participate in on-call rotation for after hours and weekend escalations

 At least 1 years’ experience configuring and/or using the following:

•  Security Management Systems (i.e. Tipping Point SMS, CheckPoint Security Management Server, Cisco Sourcefire Management Console, or JunosSpace)
• Firewalls (Cisco, Palo Alto, Checkpoint, Fortinet, Juniper SRX, or IPTables)
• IDS/IPS (Cisco AIP or Sourcefire, McAffee, Juniper or Tipping Point)
• Linux command line or similar operating system
• Experience with Vulnerability Management Tools
• Wireshark or other similar industry standard application
• Data Encryption using SSH, IPSEC VPN or TLS/HTTPS

• Opportunity to work in a progressive organization with structured training and roadmap for success

• Lunches and fun employee activities!
• Experience in one of the hottest IT industries today

Proficio is an EOE employer.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Up to 4000 + AWS + VB
• 5 Day work week
• Monday – Friday, 7.50am – 4.55pm

Responsibilities:

• Comprehend the policies and objectives related to Quality, Environmental, Water Efficiency, and Occupational Health & Safety, including environmental impact assessments and safety risk evaluations.
• Ensure the effectiveness of the Quality & Environmental Management System within the department, maintaining compliance with legal and regulatory requirements.
• Conduct regular solution analyses and manage replenishment activities.
• Troubleshoot process issues and provide detailed technical reports.
• Identify, assess, and review risk hazards and environmental impacts for both existing and new processes and activities.
• Report any quality, environmental, water efficiency, or safety concerns to the appropriate internal authority.
• Coordinate with customers on production issues and project updates.
• Develop and periodically review work instructions, process parameter standards (PMP), and Failure Modes and Effects Analysis (FMEA).
• Perform any additional tasks as assigned by the supervisor.

Requirement

• Degree in Chemical Engineering or related discipline.
• Having relevant work experience in electroplating / semiconductor field.
• Knowledge and experience in Wafer Plating is essential.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

To further strengthen our team, Global Customer Support are looking for a Service Engineer to join us at Kongsberg Maritime here in Singapore. As a Service Engineer, you will have the responsibility for installation, service, and maintenance of KONGSBERG’s Tank Gauging, Loading and Stability Systems onboard sailing ships and in shipyards, as well as offer in-house technical support and remote service to customers and colleagues around the world. Within the Tank Gauging, Loading and Stability Systems product range, we have systems such as Cargo Monitoring and Control system, Sensor Reliability Application, Custody Transfer System and numerous sensor applications for monitoring of Cargo tanks.

Responsibilities:

• Installation & commissioning of Kongsberg Maritimes Tank Gauging Loading and Stability Systems.
• Provide service & maintenance onboard vessels worldwide
• Technical support and on-call/remote service
• Engage in product innovation, development and sales support activities.
• Cover service activities in South East Asia and maintain good relationship with existing clients
• Required to undertake ad-hoc duties which may be assigned from time to time.

Requirements:

• Diploma or Degree in Electronics/Mechatronic/Instrumentation Automation: Relevant experience may compensate for lack of education
• Must have excellent co-operative skills, good communication skills, result-oriented, self-motivated and the project-management skill
• Relevant experience in the maritime industry, especially with onboard Automation and Cargo tank gauging systems.
• Experience with control systems and cargo monitoring is a plus.
• Good oral and written communication skills in English
• Highly motivated for worldwide support activities (travelling is required)
• Self-driven attitude to find solutions to problems.
• Passion and patience for handling customers – Service oriented
• Contribute to a good and positive working environment.
• Act on own initiative, make things happen and accept responsibility for the results.
• Use a methodical and systematic approach, plan ahead and define clear priorities.
• Communicate in a clear, precise and structured way.
• Co-operate well with others and share knowledge, experience, and information

Only shortlisted candidates will be notified for interview.

Interested applicants, please apply via https://www.kongsberg.com/careers/vacancies/field-service-engineer---tank-level-gauging-systems/

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.