Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

We are the concentrate team in PepsiCo working across the Beverage, Nutrition and Snacks categories to deliver concentrate for many of PepsiCo’s mega brands including Gatorade, 7Up and Pepsi. We are at the heart of PepsiCo products, sourcing ingredients to manufacture more than 1,200 recipes for our brands. We are a global organisation, situated in 17 locations across 11 countries offering careers in various functions from Manufacturing, Supply Chain, Procurement, Quality, Finance, R&D, HR and IT. We want team members who can collaborate in our fast paced global organisation and are passionate about creating and delivering much-loved household brands to markets across the world.

The Technical Function is our team of enabling experts offering knowledge and partnership to functions on specialist subjects including engineering, quality and productivity. They ensure operations and food safety excellence for our team. Could you bring a new dimension to our technical expertise? If so we could take your talents to a whole new level.

This role requires supporting Quality Control requirements for finished goods as part of the QC team. Specific responsibilities can be expected to rotate between the finished goods and raw materials laboratories.

Kindly note that this role will require AM & PM shift work. AM shift timing is 7.30am to 4pm & PM shift timing is 3.30pm to 12 midnight. Transport will be provided.

Responsibilities:

• Responsible for the daily laboratory planning, prioritization and analysis of in-process and / or finished product samples in accordance to documented testing methodology.
• Provide accurate and timely disposition of Flavour Raw Materials and Finished Concentrates in accordance with the Company's accept/reject criteria.
• Ensure all instrumentation used in the testing of products are validated and calibrated to standard.
• Ensure all laboratory records are kept in accordance with the Company's protocol.
• Compile and report relevant KPI's monthly to Lab supervisor. Implement quality initiatives and quality strategic initiatives appropriate to level.
• Responsible for blocking and communicating any batches rejected or placed on-hold to operations and raise relevant Trackwise record for follow-up.
• Complete quality activities in the introduction of new product. Trouble shoot issues and carry out bench scale investigations where required.
• Analyse the data/trend and challenge non-value-added activities to streamline the Lab operations.
• Adhere to PepsiCo Health and Safety requirements.
• Ad hoc duties or projects as assigned by Lab supervisor.

Qualifications:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Food Science, Microbiology or Equivalent.
• Computer literate
• At least 3 years work experience in a relevant field.
• System and operational knowledge - SAP, LIMS systems and Gas Chromatography, HPLC operational and troubleshooting experience is an added advantage.
• An understanding of GMP/GLP and other key manufacturing processes
• Ability to planning, manage priorities and deliver results to meet internal customer requirements.
• Experience in building excellent working relationships with operations team members
• Good Communication Skills across all levels in an organization.
• Good Attention to detail
• Self-starter, proactive in delivering results and a good organizer
• Strong Team Player

Metric Materials Analysis Pte. Ltd. is a young and dynamic company offering materials analysis and certification services to our customers.

We are seeking an experienced, entrepreneurial and meticulous individual to join us. He or she has to have good organisational and communication skills to perform well in this role.

Job Description

The successful candidate will be working in an air-conditioned, industrial laboratory environment.

Responsibilities include:

1. Maintain operation of laboratory as per ISO 17025.

2. Assist with SAC accreditation.

3. Oversee day to day operations such as carrying out and scheduling test, issue test reports, schedule calibration and maintenance of machines, etc.

4. Implement testing techniques and standard operating procedures in the laboratory.

5. Review and maintain lab risk assessment.

6. Plan testing capacities based on internal and external requirements, ensuring efficient lab operations.

Pre-requisites:

1. Candidates should possess at least a diploma/degree in Applied Science Engineering, Material Science, Civil Engineering, Mechanical Engineering or related fields.

2. Minimum 3 years of experience in lab (rebar & steel testing). Those with experience in other tests will have an advantage.

3. Singaporeans or PR only.

Renumeration & Benefits:

1. Salary range from $3,500 to $4,000

2. 9:00am to 6:00pm

3. 5-day work week

4. Annual bonus & incentives.

Kindly include last drawn salary and character referee(s).

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / ervice & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Duties and Responsibilities

• Support the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Support the design and building of tools that allow debugging, analysis, and evaluation of control system performance.
• Conduct root cause analysis for control system failures in products for integration and fielded units during escalations.
• Perform PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems.
• Performs integration activities including troubleshooting the control system, designing and executing test plans and test automation, to ensure the algorithms functions as designed.
• Documents work results with requirements, design specifications, procedures, and training materials.

Knowledge, Skills and Abilities

• Control System Design: Assist in the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration.
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware.
• Testing and Validation: Design and execute test plans to validate control system performance and robustness.
• Hardware Integration: Work closely with hardware engineers to ensure seamless integration of control electronics with power converter hardware.
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports.
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases.
• Compliance: Ensure that control systems meet industry standards and regulatory requirements.

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field.
• Minimum of 7 years of experience in controls engineering, with a focus on power electronics field.
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink).
• Strong programming skills in languages such as C/C++ for embedded systems.
• Experience with hardware-in-the-loop (HIL) testing and control system validation.
• Knowledge of grid integration, grid codes, and power quality standards is a plus.
• Excellent problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.
• Ability to work in a dynamic and collaborative environment.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

To supervise, execute and monitor the activities of manufacture floor to ensure reliable and optimal operation of processes, equipment, utility and facility so as to achieve target production levels within the framework.

Responsibilities:

· Develop, review, and update all process control documents, procedures and operation condition sheet.

· Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.

· Perform trial production and test run of new grade, new process and equipment.

· Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.

· Provide technical support and documentation for manufacturing process, including corrective measure for customer complaint in technical viewpoint

· Ensure availability of equipment, tools, production consumables, transfer of input materials for daily production preparation and follow up on ensuring housekeeping of production floor.

What we're looking for

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 2-4 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Strong problem-solving and analytical skills, with the ability to interpret and act on data
• Must be able to write and communication in Mandarin and English
• Excellent communication and interpersonal skills, with the ability to work effectively in a team
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry
• Proactive and detail-oriented, with a commitment to continuous improvement
• Willing to work in Jurong

HOW TO APPLY:

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Interested candidates, may contact handphone no. 80350150 for more details.

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Key accountability (Main purpose of this job):

Reporting to the Senior Finance Manager, this role is responsible for supporting the Finance department in various functions including accounts receivable (managing credit risk and ensuring timely payment from our customer, cashiering and accounts payable.

Responsibilities (Key areas of Responsibilities):

Debt Collection

• Develop and implement effective debt collection measures
• Monitor customer payments and alert the Senior Finance Manager of delinquent accounts
• Liaise with company lawyer/debt collectors to minimize bad debts
• Send reminder letters / make collection calls for overdue accounts

Financial Assistance

• Administer financial assistance schemes through modified instalment plans/bursary
• Attend to extensions requests

Discrepancy Resolution

• Resolve discrepancies related to non-payment of invoices

Reporting and Reconciliation

• Prepare credit-related reports (e.g., weekly debtors aging reports to management during semester fees collection
• Provide weekly forecast collections for cash flow management
• Undertake account reconciliations as required

Others

• Maintain students' billing addresses in the accounting system
• Assist in audits when necessary
• Apply receipts in the accounting system
• Assist with cashiering duties
• Attends to incoming email requests on timely manner
• Issue invoices/credit notes

Requirements:

• Diploma in Accounting or equivalent
• 2 years of relevant working experience but fresh graduates who are highly motivated and autonomous are encouraged to apply
• Advanced proficiency in Google Workspace
• Accurate and meticulous with excellent attention to details
• A team player with good interpersonal and communication skills
• Ability to work independently and diligently
• Able to work effectively and efficiently under pressure and within timelines
• Strong problem solving and multitasking skills
• Ability to remain firm and maintain high ethical standards

Responsibilities include but are not limited to:

• Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
• Manages multiple groups globally responsible for the implementation, continuous improvement, and troubleshooting of automation and control systems used for manufacturing ultrahigh purity materials supplied to the semiconductor and photovoltaic industries.
• Directly manage 10-15 US resources and dotted line management of dotted line discipline lead management of 5-10 resources in Asia (Korea, Taiwan, Singapore and Japan). Aptitude to expand reach beyond incumbent countries to France, China and other geographies as Semiconductor Materials globalize.
• Responsible for all design and support activities related to industrial power distribution, process instrumentation, industrial networks, and controls platforms globally.
• Responsible for significant level of Operation support in a 24-7, multi-site production environment including “on call” trouble ticket system for Operation Technology and Distributed Control System Issues.
• Responsible for establishing industry standard best practices across multiple global geographies.
• Responsible for delivering code compliant industrial controls systems for both green field, brown field and Process Development projects.
• Equally adept at self perform, third party and EPC model Automation and Controls and Operations Technology execution models. Ensures sufficient cross trained staff capable of all models globally.
• Responsible for developing and maintaining engineering standards used during project design and execution globally.
• Responsible for coordinating with other design disciplines for the efficient development, transfer and implementation of project requirements detailed on upstream documentation such as the P&ID.
• Responsible for maintaining compliance with internal engineering project execution standards.
• Deep understanding of standard Industrial network architectures globally.
• Understanding of ISA-99 Cyber Security Standard
• Understanding of ISA 85 Enterprise - Control System Integration Standard
• Understanding of ISA-84 Safety Instrumented Systems Standard.
• Responsible for managing the integration of the project into existing site specific industrial network and power distribution systems.
• Responsible for maintaining sufficient resources both internal and external to meet the needs of both capital projects and operational support. Globally manages resources across geographies including systems for remote support.
• Responsible for planning and articulating a roadmap for controls upgrades related to: adoption of best practices, internal minimum requirements, and obsolescence remediation.
• Requires significant creativity and leadership through problem solving
• 15% travel required (with 5% international) mostly to company sites
• Successfully completes all assigned trainings, and monitors the timely completion of training requirements of all direct reports
• Complete all assigned tasks, and monitors the timely completion of tasks assigned to direct reports

You will lead and manage the QA administration & IPQC in daily problem solving activities on Manufacturing Products Conformity (CoC) qualification in all metal parts.

Work with production Leaders and Customers, understand requirements creating comprehensive test method during production phase to leverage final checking. Drive the adoption of QA best practices through the whole team.

Hands-on adopting manual Quality checks and understand requirements is a must.
Excellent written communication skills with Customer QA and team members.

Key Responsibilities:

• Abilities to Lead Quality Inspector or Checker Team efficiently and effectively in Sampling checks System, Quality Awareness in Sheet Metal environment accordingly to Customers requirements.
• Schedule of daily QC Team work assignment according to Jobs.
• Understanding Of individual Customers Parts on GO & NO-GO (Decision Making).
• Attend to Customers Quality Complaints, make action plan and execute it accordingly.
• Submission weekly QA Reports to GM without delay.
• Setup and Conduct Systematic Quality trainings for new staffs in assign duties and task.
• Administer and improve Company's ISO System and Bizsafe.
• Conduct Internal audits for all departments, functions and projects for ISO audits.
• Administer Company QMS and conduct internal audit.
• Design jig and fixture with Engineer Team enhance quick check buyoff.
• Support all QA-related functions and activities both at Company and Customers levels.
• Equipment schedule maintenance programs and execution at all levels.

Requirements:

• Diploma in Quality Management Certificate. (Internally Auditor 2015 Certified)
• Highly responsible for Quality duties and task dateline.
• 3-5 years of hands-on experience in Sheet Metal or Machining environment.
• Knowledge in all related QC tools respectively.

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• SolidWorks or AutoCAD experience desired
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Responsibilities:

• Liaise with customers and internal stakeholders to understand requirements, develop project plans and coordinate projects.
• Assist the business development team in identifying and developing new projects.
• Support the preparation of tenders.
• Prepare project budgets and technical specifications.
• Assist the operations team with Capex projects.
• Oversee project progress and ensure milestones are achieved.
• Prepare detailed reports and presentations upon project completion.
• Work with architects, engineers, consultants, contractors and clients throughout the project lifecycle.
• Support the procurement team in selecting vendors and provide relevant technical information to facilitate the procurement of equipment and services for the project.

Requirements:

• Bachelor’s degree or Diploma in Engineering (Mechanical, Civil, Electrical, or related field)
• Minimum 2 years of experience in project engineering or a related role
• Strong organizational and communication skills
• Ability to manage multiple projects and meet deadlines
• Technical proficiency in project planning and documentation
• Collaborative mindset with experience working with diverse teams

Responsibilities:

• Responsible for all type maintenance work related to steam turbine.
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures.
• Possess knowledge and skills on turbine and maintenance at power plant.
• Knowledge in specialized area & ability to resolve technical issues.
• Ensure continuous improvement on the plant’s systems and processes in terms of productivity, reliability, and safety.
• Ensure works are carried out in compliance to the safety and Statutory requirements
• Conduct planned outages effectively and complying with regulatory, safety and production requirements.
• Any other ad-hoc duties assigned.

Requirements:

• Min Diploma or Bachelor's degree in Mechanical Engineering.
• Min 3 years working experience in the relevant field.
• Experience in Power Plant industry is an advantage.
• Willing to work in Tuas South.

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).