JOB DESCRIPTION – Network Engineer – Routing and Switching (Level-2)

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per security policies and standards.
• Maintain/Update inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Temus was established by Temasek in partnership with UST, to provide digital transformation solutions for the private and public sectors as we aspire to be a strategic partner in realising the Singapore Government’s Smart Nation vision. We are headquartered in Singapore and have more than 400 employees across a wide range of disciplines in strategy, design, architecture, technology, data & AI.

Responsibilities:

• Understand and analyze customers’ requirements to design the enterprise technical solutions which meet customers’ needs.
• Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.
• Support service continuity measures i.e., backup/restore procedures & disaster recovery plan.
• Provide technical support and consultation for enhancement and change to network configuration
• Maintain network documentation. Prepare operation and management reports.
• Define processes to manage the network infrastructure

Requirements:

• Degree / Diploma in Computer Science or a related discipline
• Minimum 10 years of IT networking hands-on experience in LAN, WAN, Security
• Must be Cisco Certified Network Professional (CCNP) certified
• Understanding of IT technology and experience in deployment of Enterprise and Wide Area Networks
• Practical knowledge & hands-on experiences in managing TCP/IP, Routing protocols, IDS, IPS, Cisco Catalyst Switches and Cisco Routers, OSPF, EIGRP, Layer 2 technologies VTP, STP, Etherchannel, Wireless LANs, Security standards, Implementation and Analysis (Packet Sniffing) Firewalls (Checkpoint \ Mcaffee Entreprise \ Cisco PIX), Big IP F5 Appliance LTM, Bluecoat Packet shaper 3500, VPN Appliances : Cisco VPN Concentrator 3500, BIG IP F5 APM
• Familiar with Network Monitoring Software Solar winds, MRTG, PRTG

(By applying for this role, you have read and acknowledge the data privacy statement via this link - https://www.temus.com/job-applicant-data-protection/)

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Project Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,500 + HP Allowance + VB
• Duration: Permanent

Key Responsibilities

• Manage and execute all phases of project delivery, encompassing engineering, scheduling, cost control, coordination, and on-site supervision.
• Prepare, submit, and keep track of all necessary project documentation and engineering records.
• Actively monitor project execution for timeliness and quality, promptly addressing and expediting any issues that arise to maintain progress.
• Coordinate with clients, subcontractors, consultants, and other related parties to ensure project specifications are met.
• Oversee the work performed by contractors to confirm adherence to quality standards and project requirements.
• Ensure customer satisfaction with the product delivered and the services provided.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or equivalent or with at least 2 years of relevant experience.
• Comfortable with working on weekends if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68956 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Electrical Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday to Friday 8 AM – 5 PM)
• Salary Package: Basic Salary up to $4,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design, develop, and test electrical systems and components for various projects.
• Prepare and interpret electrical schematics, blueprints, and technical specifications.
• Collaborate with cross-functional teams, including project managers, mechanical engineers, and contractors, to ensure project goals are met.
• Perform calculations to ensure safe and efficient electrical system designs.
• Prepare and maintain documentation such as design specifications, project plans, and reports.
• Ensure all electrical engineering projects comply with relevant industry standards and regulations.
• Identify and resolve technical issues promptly to prevent project delays.
• Conduct regular inspections and testing of electrical systems to ensure optimal performance and safety.
• Participate in continuous improvement initiatives to enhance project efficiency and quality.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering or equivalent
• Minimum 1 year of working experience in an Electrical Engineering role

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68994 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Engineer
• Working Location: Tuas (Transport provided)
• Working Hours: 5.5 days (Mon - Fri. 8.00 am - 5.00 pm; Sat, 8.00 am - 12.00 pm)
• Salary Package: Basic salary up to $5,000 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Coordinate all aspects of assigned tasks to ensure efficient production flow.
• Provide monthly production input and identify areas for improvement.
• Offer technical leadership for new and existing challenges.
• Create and maintain process instructions and documentation.
• Develop, record, and present reports for monthly production meetings.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Engineering or a related professional certification.
• Proficient in Microsoft Office.
• Able to work with minimal supervision.
• Effective team player with good communication and presentation skills.
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69139 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

JOB DESCRIPTION

Duties:

• The project will be using AI Technology.
• Project Engineer cum Inspector need to drive Van when carry out inspections of all roads and road-related facilities.
• Must have driving license.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety, or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Project duration about 3 years

Qualifications:

• Minimum 1-2 years’ experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Your new company
Our client is a global leader in the design, engineering, and construction of high-tech facilities, including life sciences and data centre projects. They always strive to deliver innovative solutions, ensuring safe, sustainable, and functional environments. They are going through growth mode in recent years and are now looking to expand their headcount with a principal architect.

Your new role
A few of your responsibilities would be ;

· Collaborate with multidisciplinary teams to develop mechanical systems designs meeting project objectives.

· Lead design development, implementation, and handover.

· Review and ensure technical compliance with client requirements.

· Coordinate with internal teams like Civil, Archi, Electrical, Process, and Piping.

· Manage project costs, budgeting, and tender documentation.

· Chair sub-contractor progress meetings and client weekly meetings.

· Mentor and train junior engineers.

· Ensure compliance with quality assurance and safety standards.

What you'll need to succeed

· Bachelor's/Master's Degree in Mechanical Engineering or related field.

· 6-8 years of relevant experience in design and construction, preferably in industrial buildings, life sciences, and pharmaceutical sectors.

· Strong technical expertise and leadership skills.

· Excellent communication, coordination, and problem-solving abilities.

· Ability to work independently and as part of a team.

· Familiarity with industry standards, regulations, and best practices.

What you'll get in return
You'll be offered career development opportunities, succession planning and on the job training will definitely be given to you. You’d also have an amazing team supporting you throughout your career.

What you need to do now
If you feel like you meet the above requirements or know someone who does, then click on the link to apply, or you may send your application/referral directly to me at [email protected].

If this job isn't quite right for you but you are looking for a new position, please contact me for a confidential discussion on your career.

EA Reg Number: R24121320 | EA License Number: 07C3924 |Company Registration No: 200609504D

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Excellent Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability
• Working location is in Jurong East

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Roles & Responsibilities

· Responsible for executing the company projects in mechanical & electrical works in building construction which covers:

· Review project specifications and technical clarifications

· Participate in all relevant project review meetings, site meetings, design meetings, and other project relevant meetings.

· Responsible for carrying out M&E technical meetings and resolving technical issues with record.

· Prepare method statements and check drawing discrepancies

· Carry out project planning, design, material requisition, cost control, project supervision and documentation

· Supervise and assist the M & E works and coordinate with project teams, consultants and sub-contractors on technical matters

· Ensure timely and smooth progress of works

· Ensure quality of works is achieved and safety & environmental regulations are complied with

· Identify discrepancies between M&E, Structural, ID, Architectural and in house project teams’ provisions

· Work closely with the in-house teams, consultants, and subcontractors on technical and drawing matters.

· Carry out inspection of MEP works prior to concreting or subsequent construction works.

· Compliance with all necessary standards, codes of practice, and safety regulations

· Oversee all related M&E issues on site

Requirements

· Minimum 10 years of experience as M&E Engineer in construction related field

· Possess a degree from universities in mechanical or electrical engineering, recognized by the Professional Engineer Board to be overall in charge of all M&E trades

· Possess strong Electrical/Mechanical knowledge with hands-on experiences.

· Use of Autocad/BIM Revit would be an advantage

· Proficient in using Microsoft Office

· Good communicative skills with bilingual, able to interact with people of all levels and China counterpart

· Preferably Singaporeans only to apply

Role:

Service Engineer (Marine / Hands On)

• Singapore Based (Location at Tuas, Work on site (sea))
• 5 Days work per week (8am-5pm / 8.30am-5.30pm / 9am-6pm)
• Salary: Basic $3000 to $4500 (based on experience) + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances
• Must DEGREE in marine / mechanical / engineering qualification + At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like Wartsila
• Training period at office (Tuas), after training will work on vessel. + Willing to work in shipyard / anchorage environment
• Career Progression Opportunities

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. WU Zhe, on several research projects of optimization of chemical and manufacturing processes through machine learning tools
• The Research Fellow will help to develop both theoretical and simulation study of machine-learning-based control and optimization algorithms to chemical processes.

Job Requirements

For Research Fellow Position:

• A PhD degree in a relevant area, e.g., Control Engineering, Chemical Engineering, Automation, Systems Engineering, Computer Science or Applied Mathematics;
• Good publication record;
• Experienced in advanced process control, machine learning, and programming languages (e.g., python, Matlab, C++, etc)

Responsibilities:

• Responsible for overseeing project execution and management as assigned by the Manager.
• Develop and review project schedules to ensure timely delivery.
• Coordinate with customers and vendors, and manage training and on-ground activities.
• Manage resources including manpower, equipment, for software development, integration, and testing.
• Monitor project budget and spending, and ensure timely submission of finance/procurement documents (COC, RFB, Purchase Request, PO) and Goods Receipt (GR) upon delivery.

Requirements :

• Qualification in Information Technology/Computer Science/ Engineering or equivalent.
• Demonstrated success in managing projects for a minimum of 3 years.
• Professional certifications, such as Project Management Professional (PMP), are highly desirable.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Our client is from Semiconductor industry. They are now recruiting a NPI Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Diploma in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description:

• Review the basic process design from the proposal/sales team;
• Develop detailed design and P&IDs based on project specification;
• Prepare engineering calculations and equipment sizing;
• Review and understand project specifications to ensure company design complies with customer specifications;
• Prepare equipment datasheets (valve list, equipment list, piping schedule, instrument list, etc);
• Supervise and review complex equipment skid 3D model to ensure compliance with project specification;
• Supervise the preparation of general arrangement drawings, piping detail drawings; skid structure arrangement drawings;
• Interface with EIA (Electrical, Instrumentation & Automation) engineer in preparation of project documents;
• Send inquiries to vendors to obtain price quotations;
• Review of vendors, fabricators and sub-contractors quotations to ensure compliance with project specifications;
• Review of vendors, fabricators and sub-contractors engineering deliverables to ensure compliance with project specifications
• Participate in internal and external design reviews;
• Prepare O&M manuals;
• Support testing and commissioning

Requirements:

• Candidate must possess at least a degree in Environmental/Mechanical/Chemical Engineering;
• At least 5 to 8 years of relevant experience in industrial water/wastewater treatment;
• Experience in the O&G industry is a plus;
• Experience in the design of complex skid-based industrial water treatment systems;
• Experience working on multiple projects simultaneously;
• Knowledge of industry standards and specifications;
• Able to work in multi-cultural teams;
• Proficient in MS Office applications;
• Willing to travel

Job Scope:

• Create and analyze structural designs for buildings and infrastructure
• Oversee construction projects, ensuring timelines and budgets are met
• Conduct visits to assess compliance with design specifications
• Perform calculations for loads and stresses on structures
• Prepare design drawings, specifications, and reports
• Work with architects and engineers to integrate designs
• Ensure adherence to building codes and safety standards
• Address structural issues with innovative solutions
• Stay updated on materials and construction techniques
• Liaise with clients for project updates and requirements

Requirements:

• Minimum PhD or Master's degree in Civil and Structural Engineering (or equivalent)
• At least 2 years of relevant experience in Civil and Structural Engineering design
• Proficiency in steel 3D modeling, analysis, and design software (e.g., Rhino, Grasshopper)
• Proficiency in programming languages (C++, Python, Fortran)
• Ability to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight, and Steelwork design is a plus
• Good command of English

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope:

• Provide technical support to customers for software, hardware, and application-related issues.
• Troubleshoot and resolve product or system issues reported by clients.
• Assist in the installation, configuration, and setup of software or systems.
• Respond to customer inquiries via phone, email, or chat, ensuring timely resolution.
• Collaborate with development teams to report bugs and suggest product improvements.
• Document support cases, solutions, and frequently asked questions (FAQs) for internal use and customer reference.
• Perform product demonstrations and training sessions for customers.
• Provide post-sales support and ensure customer satisfaction.
• Escalate complex issues to senior technical staff or engineers.
• Participate in software testing and quality assurance activities to identify potential issues.
• Assist with product updates, upgrades, and patches.
• Maintain knowledge of product features, updates, and industry trends to offer relevant technical advice.
• Generate technical reports and user manuals or documentation as needed.
• Ensure effective communication between customers and internal teams to resolve technical challenges.

Requirements:

• Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• Entry-level candidates welcome, no experience required
• Passion for automation, creative and adaptive mindset
• Strong communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC, Control/Automation, and IoT is a plus
• 1–2 years of experience preferred

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

· Coordinate with vendors on IT equipment installations, service, maintenance and repairs;

· Maintain IT equipment asset movement

· Provide IT assistance and user training;

· Strictly adhere and preserve confidentiality of all IT information;

· Complies with companywide policies and procedures.

· Assist in the development of standard operating procedures and policies.

· Perform basic software, portals and application support such as user accounts administration, application updates and upgrades and user training and guides on how to use.

· Provides first line support for IT needs on events, trainings and troubleshooting and technical support.

· Manages IT and Helpdesk email for urgent requests for support

· Any other responsibilities as assigned by Head of Department.

Requirements:

· Diploma or Bachelor's degree in Information Technology, Computer Science, or a related field.

· Minimum of 1 year of relevant experience in IT support or a similar role.

· Basic knowledge of IT equipment, troubleshooting, and user support.

· Familiarity with IT asset management and vendor coordination is a plus.

· Fresh graduates with a strong interest in IT support are welcome to apply.

Responsibilities

1.Salesforce Marketing Cloud, Interaction Studio, Data Cloud and Service Cloud Development

• Custom Development: Leverage extensive engineering experience to develop and maintain custom solutions within Salesforce Service Cloud and Marketing Cloud, ensuring seamless functionality and optimization.
• Feature Implementation: Use Salesforce tools (e.g., Journey Builder, Email Studio, Automation Studio, Interaction Studio, Datorama, Einstien, ) to design customer journeys, hyper-personalized experiences with automated workflows and data intelligence
• Service Cloud Integration: Facilitate the integration of Marketing Cloud with Service Cloud, allowing customer data to flow smoothly between platforms and ensuring a unified view of the customer experience.

2. Advanced Coding and Customization

• Lightning Web Components: Create responsive, user-friendly UI components using Lightning Web Components to enhance user interfaces and improve functionality across platforms and use data from backend to integrate apps.
• AMPscript and SQL for Marketing Cloud: Use advance AMPscript to personalize communications and SQL for querying data within Marketing Cloud, optimizing for audience targeting and report generation.

3. CI/CD and Best Practice Implementation

• Code Reviews and Best Practices: Conduct code reviews and apply Salesforce best practices, optimizing performance, reliability, and scalability.
• Exprience of handling complex platform teams that previously worked on CI CD tools and processes.

4. System Architecture and Technical Project Leadership

• System Design and Architecture: Design scalable system architectures that align with business requirements, integrating various Salesforce components and third-party systems where needed.
• Mentoring and Team Development: Mentor junior engineers, helping them develop skills in Salesforce development, integration practices, and project management.

5. Collaboration and Communication

• Cross-Functional Collaboration: Collaborate with cross-functional teams, including marketing, sales, and customer support, to align development efforts with organizational objectives.
• Stakeholder Engagement: Communicate effectively with stakeholders to gather requirements, provide updates, and ensure project alignment with business goals.
• Vendor Management: Work closely with vendor teams to ensure resolution of platform issues and implementation of features within platform
• This combination of technical and leadership activities supports the development and integration of custom Salesforce solutions, emphasizing collaboration, best practices, and mentorship to drive team success.

Requirements

• Relevant degree - Technical degree related to Computing, Engineering, or Math
• 6+ years of exprience working with Salesforce Marketing Cloud, Interaction Studio, Data Cloud and Service Cloud Development working with major accounts or clients.
• 4+ years of Continuous Integration/Continuous Deployment (CI/CD): Implement CI/CD processes within the Salesforce environment, setting up automation for testing, validation, and deployment.
• 4+ years of exprience of designing architecture and strategy for atleast 5 or more clients.
• Project Leadership: Lead technical projects, including gathering requirements, consulting on technical strategy, designing solutions, managing timelines, and tracking deliverables.
• Have working knowledge of handling data privacy with PII
• Working experience of handling multiple vendors and having worked with major clients with data size more than 1M contacts.
• Experience setting up Salesforce Environment
• Technical, Funcational and business analysis experience to be able to talk to clients on requirements, consult on best practices and develop required features on the platform.
• Exprience of building custom code modules and custom dashboards for clients like retail, social media tha handle real time data.

It will be an added advantage if you have the following Salesforce certifications:

• Salesforce Email Specialist
• Salesforce Administrator
• Salesforce marketing Associate
• Salesforce Copado DevOps
• Salesforce AI Associate

Mon to Fri - 8am to 5.30pm

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Job Description

• Industry/ Organization Type: Manufacturer – Metal Stamping
• Position Title: Principal Tooling Engineer /Principal Engineer – Tool & Die
• Working Location: West (Transport provided at Boon Lay/Pioneer)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6000 + AWS Variable Bonus + $30 Mobile Claim
• Duration: Permanent Role

Key Responsibilities

• To lead the tooling team in problem-solving, identifying issues, and conducting root cause analysis.
• Analyze and improve stamping processes for cost reduction and quality enhancement.
• Investigate technical issues and analyze defects.
• Provide technical support to Sales and ensure tooling feasibility for customers.
• Lead cross-functional teams to streamline operations, reduce cycle times, and cut down on waste.
• Manage all documentation to comply with ISO9001, IATF16949, ISO14001, and ISO13485 standards.
• Enforce safety protocols and ensure a safe working environment while complying with industry standards.
• Develop and implement preventive maintenance plans to prolong tool life and reduce downtime.
• Promote a culture of continuous improvement using Lean Manufacturing and Six Sigma methods.
• Regularly monitor and report on key performance indicators (KPIs).
• Maintain detailed records of all tooling modifications and maintenance.
• Collaborate with Production, NPI, Quality Control, and Operations teams to optimize tooling effectiveness.
• Handle additional responsibilities as assigned by management.

APPLY NOW!!!

• At least 3 years of relevant experience.
• Minimum Diploma in Precision Engineering or equivalent technical qualification in Tool and Die making required.
• Strong commitment to safety and regulatory compliance.
• Proficient in Lean Manufacturing and process optimization.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69620 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Career Growth
• Attractive Compensation and Benefits

About Our Client

Our client is a leading provider of comprehensive cybersecurity solutions, specializing in the protection of personal computers and IT infrastructures. They offer advanced endpoint security, encryption, secure authentication, and network protection services, helping businesses safeguard sensitive data and defend against cyber threats.

Job Description

• Provide 1st level on-site support for end-user operations, troubleshooting complex technical issues in a fast-paced business environment, and offering 24x7 on-call support as needed.
• Administer, support, and maintain VMware vSphere and VMware Horizon VDI environments, including daily tasks like upgrades, patches, security configurations, and fine-tuning performance.
• Assess risks related to virtual machines and VMware environments, perform contingency planning, and recommend related hardware, software, and services to ensure optimal system performance.
• Collaborate with external parties for problem resolution, maintain technical documentation, and create regular maintenance and incident reports to ensure smooth operations and compliance.
• Lead post-delivery support for client applications (e.g., Workspace ONE, Zimperium, OnTalk), manage inventory, and oversee preventive maintenance schedules and special projects as required.

The Successful Applicant

• Minimum 2 years of working experiences supporting enterprise desktop environment and good technical expertise in VMWare VSphere and VMWare Horizon VDI.
• Hands-on with technology and a strong interest in exploring new technologies, with expertise in VMware vSphere and VMware Horizon VDI.
• Exceptional customer focus, professional acumen, strong communication skills, and experience in managing vendor relationships, negotiations, and conflict resolution.
• Skilled in ITIL practices, quality escalation management, exception handling, and ensuring SLA compliance, while also managing costs and contract renewals.
• A reliable team player with a proactive attitude, capable of working independently, and experienced in supporting enterprise virtualized environments, with knowledge of Windows, Linux, and backup/recovery applications.

What's on Offer

• Competitive Salary: Attractive compensation package
• Growth Opportunities: Professional development and career advancement in a fast-paced environment

Contact

Eleen Chong (Lic No: R1982403 / EA no: 18S9099)

Quote job ref

JN-112024-6584310

Phone number

+6564169862

Michael Page International Pte Ltd | Registration No. 199804751N