Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

This is an excellent opportunity to be a part of the Asia Trade & Working Capital product controller. The Asia Trade & Working Capital Product Controller team is an ideal area for a highly motivated candidate to develop their career. The team partners with a multitude of regional and global stakeholders including Credit, Risk Management, Product Management, Operations, Line of Business and Legal Entity Controllers to deliver on the product control agenda whilst providing the business meaningful and timely support and analysis. The Asia Trade & Working Capital Product Controller team is seeking to hire a highly motivated candidate to join the regional team based in Singapore

As a Product Controller in the team you will be contributing to the overall integrity and accuracy of the financial information related to Trade Products. This team executes a wide range of responsibilities including monthly close, financial general ledger reporting and regulatory activities, the firm finance target/systems infrastructure and strategic projects to support the business.

Job responsibilities

• Perform monthly close activities including but not limited to review of financial data, investigating significant variances and transactions, fluctuation analysis, preparation of financial reporting deliverables, preparation of estimate accruals, entry processing, perform reconciliations, general ledger substantiation etc.

• Lead change within month-end processes in order to improve transparency in month-end results

• Participate in the review of New Business Initiatives for Trade Products.

• Ensure financial information is in compliance with US and local GAAP and the Bank’s Corporate Accounting Policies, documenting exceptions where appropriate.

• Act as a resource to project management and the businesses for various projects/business initiatives

• Identify and lead targeted reviews for specific products/processes based on both qualitative and quantitative factors and risks

• Understand and contribute to the control framework of the business

Required qualifications, capabilities, and skills

• Minimum of Bachelor's degree in Accountancy, Finance or related discipline

• Minimum of 4 years of experience in accounting or external audit in the financial services industry

• Strong analytical, problem solving skills, attention to detail and control focus

• Excellent communication skills and ability to develop strong working relationships with global team and other groups within the organization

• Enthusiastic, highly motivated and effective under tight timeframes and pressure

• Excellent Microsoft Excel skills and good knowledge of SAP system

Preferred qualifications, capabilities, and skills

• Strong Trade Finance product and process knowledge

• Qualified accountant (CA/CPA)

• VBA skills

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=a3cc7e0c4afbca40a44dcc65486c2169

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Key Responsibilities:

• Conduct research clearances for the research department against the research blackout list.
• Maintain greylists and blackout lists in the Personal Investment Policy (PIP) system.
• Process and review staff trade applications in compliance with internal policies.
• Address staff inquiries related to the Staff Trading Policy and Conflict Management Policy.
• Perform User Acceptance Testing (UAT) for enhancements or new implementations of the PIP system.

Requirements:

• Degree in Banking, Finance, or any related discipline.
• At least 2 years of hands-on experience in compliance operations within financial sector.
• Familiarity with compliance policies (e.g., staff trading, conflict management) is good to have.
• Meticulous attention to detail to ensure accuracy in data entry, as no marker-checker function is in place.
• Ability to learn quickly and adapt to system changes or new processes.
• Excellent organizational and time-management skills to handle fluctuating workloads effectively.

Interested candidates may send in their resume and cover letter directly to [email protected] (R1434374), stating the position as the subject title in the email.

Jireli Gem Mejia Cabria | EA License No. 02C3423 | Personnel Registration No. R1434374

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by ManpowerGroup Singapore for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities:

• Lead and manage day-to-day performance of Local and Overseas Customer Service teams
• Handle and resolve client complaints / inquiry / feedback
• Improve customer service experience, create engaged customers and facilitate organic growth
• Develop customer service procedures, policies and standards
• Keep accurate records and document customer service actions and discussions
• Generate reports by analysing the customer service experience, if requested
• Provide training to customer service staffs to deliver a high standard of customer service

Requirement

• Bachelor’s degree in any related discipline
• Min 8 years of Customer Service Support experience with at least 4 years in leading team size of up to 30 agents
• Having experience in IT, financial services or payment solution industry is an added advantage
• Proficient in Microsoft Office applications
• Customer service orientation, stress tolerance, problem analysis and problem-solving
• Effective interpersonal skills with both internal and external customers
• Advanced troubleshooting and multi-tasking skills

Interested candidate please submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile - https://sg.go.persolkelly.com/job/details/10361

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Registration ID <R1105286> (Ngiam Xinyi)

Quality Assurance (QA)

• Working days: 5 / 6 days alternate
• Working Hours: 830am-530pm
• Salary: $2000 - $2400
• Working Location : Bedok

Job responsibilities

• Conduct detailed inspections of finished products to identify defects, non-conformities, and deviations from quality standards.
• Support quality in handling defective found during the production
• Collaborate with the quality control team to resolve material quality issues and determine disposition (accept, reject, or rework)
• Collaborate with the production, quality teams to identify root causes of defects and non-conformities
• Perform FA report, and propose process improvements.
• able to use calliper, OGP , Keyence, Drop gauge , micrometre, pin gauge
• able to interpret 2D drawings
• ⁠collect parts for 2 hourly to visual inspection
• ⁠key in data

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Job Description:

• Updating and maintaining records and documentation for the ISO 9001, ISO 14001, and ISO 13485 systems.
• Manage internal and external audit system as well corrective action reporting system.
• Monitor and review supplier performance to address non-conforming materials.
• Work closely with production team on internal process and quality issue.
• Coordinate the review of quality procedures and manage the inspection standard on incoming, in process and outgoing inspections.
• Handling customer complaints and ensure all corrective actions to customers are implemented and documented.
• Plan regular internal inspections in accordance with relevant procedures.
• Perform another related task as assigned.

Job Requirement:

• Good interpersonal and communication skill
• With working experiences from tooling fabrication or plastics injection molding industry preferred
• Good knowledge of ISO 9001, ISO 14001, ISO 13485 and ISO 22301 quality system
• Knowledge in supplier management
• Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Roles and Responsibilities (Software Quality Engineer)

a. Assist Product Owner, Business Analyst to craft out user story acceptance criteria

b. Analyse and decompose complicated software systems, and design a holistic test strategy

c. Conduct research on emerging technologies and develop test automation framework

d. Develop test suites of test scenarios and test cases

e. Take a risk-based approach for test automation

f. Perform time boxed exploratory testing

g. Maintain regression test suite in QA nightly build

h. Actively refine smoke test suite in Development CI environment

i. Lead system integration testing with other systems

j. Manage user acceptance testing

k. Manage defect life cycle, test artefacts and repository

l. Drive continuous improvement in agile testing practices and tools

m. Take on secondary role as low code application development engineer or Security Ops Engineer

n. Improve software quality using XP practices such as code review and unit testing

o. Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Knowledge and Skills (Software Quality Engineer)

a. Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

b. Min 3 years’ experience in exploratory testing and regression test automation

c. Strong analytical skills

d. Meticulous attention to details

e. Good interpersonal skills such as tactfulness

f. Good presentation and listening skills

g. Experience in agile development environment will be an added advantage

h. Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant or Pega Unit Test will be an added advantage

i. Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Roles and Responsibilities (Software Quality Engineer)

a. Assist Product Owner, Business Analyst to craft out user story acceptance criteria

b. Analyse and decompose complicated software systems, and design a holistic test strategy

c. Conduct research on emerging technologies and develop test automation framework

d. Develop test suites of test scenarios and test cases

e. Take a risk-based approach for test automation

f. Perform time boxed exploratory testing

g. Maintain regression test suite in QA nightly build

h. Actively refine smoke test suite in Development CI environment

i. Lead system integration testing with other systems

j. Manage user acceptance testing

k. Manage defect life cycle, test artefacts and repository

l. Drive continuous improvement in agile testing practices and tools

m. Take on secondary role as low code application development engineer or Security Ops Engineer

n. Improve software quality using XP practices such as code review and unit testing

o. Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Knowledge and Skills (Software Quality Engineer)

a. Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

b. Min 3 years’ experience in exploratory testing and regression test automation

c. Strong analytical skills

d. Meticulous attention to details

e. Good interpersonal skills such as tactfulness

f. Good presentation and listening skills

g. Experience in agile development environment will be an added advantage

h. Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant or Pega Unit Test will be an added advantage

i. Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Information

1. Salary range: $2200 - $2800
2. Working hours: Mon - Fri, 9am - 6pm

Responsibilities:

• Assist in administrative and process on non-conformances for ISO and GMP.
• Liaise with all departments for any ISO and GMP documentation.
• Liaise with departments on any change of documents, corrective & preventive action
• Ensure all documents follow the requirement.
• Liaise with consultant on ISO process, documents and requirement matters.
• Source quotation for any purchase of equipment for ISO and GMP requirement.
• Filing, typing, printing and destruction management, quality support and overall productivity
• Any other ad hoc duties assigned.

Requirements:

• ITE/Diploma/Degree in Business/Administration
• At least 2 years of working experience -
• Proficient in Microsoft Office (Microsoft Word, Excel and Powerpoint)
• Must be meticulous and able to work independently with minimum supervise
• Knowledge in GMP and ISO 9001, ISO 14001, ISO 45001 will be advantageous.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Note: This role will require travel to China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Note: This role will require travel to China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel extensively (at least 10 months per year) to China and Vietnam. Travel includes four round-trip tickets to Singapore annually, with separate living arrangements provided.

Responsibilities:

• Oversee the development, implementation, and management of the qualification processes for the company's products across all global markets
• Ensures that all products meet the highest standards of quality and compliance with international regulations and customer expectations.
• Lead a team of qualification specialists and work closely with other departments, including project management, product design, regulatory and compliance, production, product management and external parties like suppliers and contract manufacturers to ensure seamless qualification processes.
• Develop and implement global qualification strategies aligned with the company’s business objectives.
• Oversee the development and execution of qualification plans for new products and updates to existing products
• Responsible for series process and product quality for all products manufactured by external contract manufacturers.
• Identify and mitigate risks associated with product qualification and compliance
• Engage with customers to understand their qualification needs and expectations.

Requirements:

• Degree/Masters in Engineering
• Experience in Electronics Industry
• Global Experience will be a plus
• At least 10 years of experience in Quality

Account Manager:
Kerwin Tan Kai Bin (R1331624)
[email protected]
EA16S8107

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Job Description

• Responsible to review and approve the Quality Control related protocols, reports, procedures and other related documents to ensure compliance to internal procedures and regulatory requirements.

• Evaluate and approve discrepancy related to qualification/validation protocols in order to guarantee documentation of the incidents and identification of corrective actions.

• Support collaboration and participations in projects as Quality Representative for Quality Systems and Validation.

• Provide validation expertise, oversight and support for the development of Analytical Instrument Qualification and Microbiology Method Validation

• Ensuring the information contained in approved qualification/validation document(s) is understandable and defendable during inspection.

• Provide quality oversight on the Quality Control validation maintenance activities and Master Validation Plan.

• Build strong partnership with all other departments to ensure open communications and acceptance

Requirements

• Min Degree in pharmaceutical sciences, life sciences, biology, biotechnology chemistry, chemical engineering, engineering or a related discipline

• A minimum experience of 2-3 years in the pharmaceutical or biotechnology in quality assurance, manufacturing operations will be preferred

Interested candidates are invited to email your resume to:

[email protected]

Jenalyn Ooi Huai Sian (R1765551)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

We regret only suitable candidates will be shortlisted for an interview.

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: QA Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599