Description

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks. Performs testing and commissioning activities and ensures that proper documentation is approved and signed. Supervises and deploys manpower to execute the operational tasks. Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system.
• Reviews commissioning work processes to enhance efficiency and productivity. Liaises with owners, class surveyors, and government bodies pertaining to project requirements. Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors. Plans and schedules the testing and commissioning requirements based on project basis, and organizes all logistics requirements for major operations. Performs any other assigned duties and responsibilities.
  
  Requirements:
  
• Diploma in Electrical Engineering or related Engineering Disciplines.
• Min. 4 years of related work experience working on FPSOs. Possess working experience related to testing of LV/MV Switchboards, power generators, DCS/ICSS interface for PMS system. Capable of testing and calibration of Electrical switchboard and its components, troubleshooting, and clear understanding of system specification and class requirements. Familiar with the testing procedures and applicable rules and regulations of regulatory bodies.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Responsibilities

• Provide technical support to end-users on various technical issues and problems relating to hardware and software as well as network connectivity in the organization (e.g., desktop/laptop computers, printers, scanners and Smart Phones) and software such as Microsoft Office and emails.
• Setup and deploy new desktop / laptop computers and the associated software, including Windows Active Directory (AD) administration.
• Support service request and incident management to provide quality end-user services.
• Perform ad-hoc root cause analysis and problem resolution.
• Ensure and follow standard IT service delivery processes in accordance with IT policies and procedures.
• Develop checklists for typical problems.
• Assist his/her immediate supervisor in the definition methods for issue resolution and prevention.
• Perform other duties as assigned.

Requirements

• Diploma in Information Technology, Computer Engineering or equivalent, with at least 1 year experience and have handle VIPs experience.
• Proficient with Windows operation systems, M365, Anti-virus software and etc.
• General technical troubleshooting on IT hardware and software products (Desktops, Laptops, Printers, Audio, Projectors & etc)
• Handling incident tickets from end user for IT matters.
• Experience in supporting Microsoft Active Directory and DHCP will be an added advantage.
• Possess excellent interpersonal skills, resourceful, analytical, problem-solving and communication skills.
• A motivated person with the ability to work independently, a good team player and goal oriented individual.
• 5 days from 830am to 530pm, Bedok.
• Job Reference: LRW46496

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

You belong to the top echelon of talent in your field. At one of the world's most iconic financial institutions, where infrastructure is of paramount importance, you can play a pivotal role.

As an Infrastructure Engineer III at JPMorgan Chase within the Infrastructure Platforms team, you utilize strong knowledge of software, applications, and technical processes within the infrastructure engineering discipline. Apply your technical knowledge and problem-solving methodologies across multiple applications of moderate scope.

Job responsibilities

• Engage hands-on database administration matters such as Queries, Query optimization and managing complex procedure

• Implement database backup and recovery procedures using Oracle RMAN, ZDLRA appliances

• Perform database tuning and optimize queries and stored procedures

• Deliver database consulting work to the internal customer base across all the lines of business within the firm

• Perform minimal downtime database migration for large, complex database, covering both homogeneous and heterogeneous environments

• Build strong relationships and serve as a trusted advisor to application development teams, enabling them to accelerate cross-cloud modernization efforts and achieve successful outcomes

• Work closely alongside database product engineers and database support to deliver an integrated service and seamless experience to internal application developers

• Demonstrate initiative to drive progress across multiple concurrent assignments, from small to large scale

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science or equivalent

• 3+ years of experience or equivalent expertise troubleshooting, resolving, and supporting Database services

• Strong knowledge in Oracle database architecture and administration

• Strong expertise on at least one of the following database technology - AWS RDS, AWS Aurora, Oracle Exadata, Microsoft SQL Server, MySQL, Postgres, Cassandra

• Understanding in Data migration, data streaming tooling (e.g. Oracle Goldengate or Pentaho), database security, and encryption practices

• Basic experience with Unix systems and shell scripting

• Passion in developing infrastructure engineering knowledge of additional domains, data fluency, and automation knowledge

• Experience with multiple cloud technologies with the ability to operate in and migrate across public and private clouds

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=a794827f0405f93d1b750583cd33295d

Title: End User Ops

Perm

Responsibilities:

• Provide DevOps-level support for MobileIron, Intune, Remote Access, and other end-user platforms.
• Support Windows 11/Intune environments with 3-5 years of experience.
• Manage incidents, outages, and problem resolution for critical services.
• Collaborate with Tier 1 and Tier 2 Service Desks, vendors, and engineering teams for escalated issues.
• Oversee access management, compliance, and governance for service platforms.
• Coordinate disaster recovery events and service improvement plans.
• Troubleshoot and resolve Intune-related issues, including device compliance and connectivity.
• Perform patching, autopilot updates, and driver/firmware servicing.
• Support over 150,000 mobile endpoints and drive transitions to future platforms.

Requirements:

• 3- 5 years Strong experience with Microsoft Intune, mobile device management, and troubleshooting.
• Knowledge of Windows, iOS, and Android operating systems.
• Proficiency in PowerShell scripting and Intune Graph API is a plus.
• Excellent communication, collaboration, and problem-solving skills.
• ITIL/DevOps experience and relevant certifications are advantageous.

(EA:20C0196)

R22108971

Job Description:

• Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Assist in the implementation of project operations to comply with ISO 9001; 14001; 45001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Update the progress of structural works in the Progress Reports
• Assist in commissioning including coordination structural engineering
• Maintain the proper documentation of inspection forms and other follow-up inspections from RE
• Support Quantity Surveyors in conducting site measurement and inspections
• Liaise with sub-contractors, suppliers and clients
• Work under the advice of the Safety Officer to adhere to compliance & safety requirements with regulatory and industry standards during the construction phase
• To ensure works are in compliance with quality procedures and within standard workmanship requirements

Requirements:

• Minimum Degree in Civil Engineering (recognized by PE Board of Singapore)
• At least 3 years of local relevant experience in Construction industry; HDB or LTA preferred
• Good analytical, communication and interpersonal skills

Suitable candidates are encouraged to apply this position via Apply Now button or email to [email protected]

Only shortlisted applicants will be notified.

We are looking for Senior Data Engineer to join Data Engineer team squad. You will be responsible for platform administration, operational support, small change and release management. Larger, more complex changes are delivered by an L3 squad and project teams.

Key Responsibilities:

Release Management and Support activity (~60%):

· Assist the team with Production code deployment and data platform support

· Act as a gatekeeper Production following JERAGM’s change management process.

· Support production data pipelines and reports.

· Provide detailed analysis of data issues in Production with a quick turnaround time.

· On occasion, provide support for applications in Public Holidays and in weekend releases.

· Compile and present monthly Ops reports.

· Help the Data Engineering Manager by sharing evidence based on data-driven analysis.

· Set up security for end users when required.

Data Engineering (~40%):

· Design and deliver data solutions using an agile, iterative approach based on Scrum.

· Develop high quality data pipelines using Spark, Python, SQL and Azure services.

· Collaborate with the Data Engineering Manager on technical architecture and design.

· Analyse and estimate IT changes, providing input on technical opportunities, constraints, and trade-offs.

· Create documentation and present to both technical and non-technical audiences.

· Handover 1st line support to the JERAGM IT Ops teams and 2nd/3rd line support to the L2 squad.

· Conduct detailed testing for development activities and demonstrate results according to the delivery methodology and coding standards.

· Create complex charts and reports using Python libraries, Databricks, and Power BI.

Technical Skills

· 8 plus years of relevant experience.

· Strong proficiency in writing complex SQL Queries, Stored Procedure etc.

· Proficient in Python, or the ability to learn basic Python for the interview process.

· Experience with Azure or a willingness to learn and deepen knowledge of Azure platforms.

· Exposure to Azure Databricks, or an eagerness to gain experience working with Databricks.

· Experience orchestrating data pipelines using Azure Data Factory or SSIS.

· Knowledge of Python packages such as Pandas, Numpy, and Seaborn.

· Understanding of Big Data, MapReduce, Spark, and file formats like Parquet, Avro, and ORC.

· Familiarity with reporting tools such as Power BI or Tableau.

Support:

· Experience in a support role with experience using JIRA or similar tools to track issues and manage them through a small team.

· Experience managing releases under a change control process.

· Experience of communicating with users and other stakeholders.

Software engineering and delivery:

· Source code management e.g. Azure DevOps, Git

· Agile delivery methodologies such as SCRUM or Kanban

Job Requirement:

• Degree in Civil/Structural Engineering.
• Recognized by PEB Board/IES.
• Must have at least 2 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

$2,400 to $3,400
5 days
9am - 6pm
Office location: Bukit Batok
Working location: Singapore Islandwide - Client site

Requirements

• Candidate to possess with a ITE, Diploma, Advanced / Higher / Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Computer / Telecommunication), Engineering (Electrical / Electronic) or equivalent.
• On job training provided

Job description:

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.
• Responding to requests for technical queries with detailed analysis of the building management system, planning of project schedule and execution.
• Handle ACMV related equipment controls including control logic programming.
• Check and ensure all installations conform to project specifications, and be able to manage system applications, drafting, database generation and commissioning of the systems.
• Effective handling of project reviews and handling by conducting FAT(Factory Acceptance test), SAT(Site Acceptance Test).

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Work Location: Ang Mo Kio

You will be part of a development team to develop, test and deploy system/network infrastructure as part of an overall project implementation.

Job Description:

• Design, build, and maintain AWS infrastructure using infrastructure as code (IaC) tools like GitLab, Terraform, Sentinel and Ansible.
• Improve efficiency and robustness of Control Tower/Landing Zone pipelines, workflows, Lambda functions and CloudFormation stacks/stacksets.
• Improve operation excellence and efficiency by automating routine tasks using AWS native tools like AWS Lambda, Step Functions, and AWS Systems Manager.
• Collaborate with Enterprise Application engineers to ensure that automation tasks are aligned with business requirements.
• Troubleshoot and debug issues related to AWS resources and infrastructure.
• Implement security measures to protect AWS resources.

Requirements:

• 3-5 years of relevant working experience
• Strong technical knowledge on RHEL or Windows Operating System
• Proficient in automation tools like AWS Lambda, Step Functions, and AWS Systems Manager
• Experience in CI/CD and Infrastructure as Code tools like Gitlab, Terraform, CloudFormation and Ansible
• Familiar with scripting languages like Python, Bash, and PowerShell
• Knowledge of security best practices in AWS
• Cloud certification (AWS / Azure / GCP) will be advantageous
• Knowledge in Active Directory, Public Key Infrastructure or Networking will be advantageous

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Summary:

As a Principal Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor Degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.

Skill Requirements:

• Good Knowledge of AutoCAD.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities

• Lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• Act as Key Person to execute tender preparation, actual EPC/EPCm project execution.
• Generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• Carry out process simulations and develop heat and material balances.
• Carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• Carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• Conduct and/or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• Check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts.
• Support construction and commissioning activities at site.
• Coordinate with client, Project Team and other engineering departments and vendors.
• Monitor manhours and schedule for Process work and deliverables.
• Perform other functions that may be assigned by Department Manager.

Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Job Summary :

Provide pre-sales and post-sales support to customer on semiconductor testing.

Maintain customer satisfaction so as to maintain or become the preferred tester platform

Job Responsibilities:

• Project delivery and support of Test Program/Test Library creation, conversion or consultation as required by Customer
• Provide support and consultation for Hardware and Software solutions for Customer Projects
• Post sales consulting and support including test methodology enhancements and modifications, test hardware/ software feature recommendations and audit
• Support and debug production issues like correlation, test time and yield discrepancy etc
• Delivery of application training, knowledge transfer and skill-up for Customer

Minimum Qualifications:

• Bachelor's Degree or equivalent
• Minimum 7-10 years of working experience in IC testing industry
• Good knowledge of digital/Mixed signal test methodologies
• Well versed with Java and C++, script programming, knowledge on 93000 software and debugging tools will be an added advantage
• Good experience in test program development and test floor exposures
• Strong problem solver with good technical capabilities, good communication skill, self-motivated, customer focus and result oriented
• Ability to work independently with minimum supervision

Job Responsibilities

1. Responsible for the development and maintenance of the company website.

2. Responsible for the development and maintenance of hybrid pages for the company’s app.

3. Responsible for the development of operational activities.

4. Development and maintenance of the component library.

5. Optimization of system performance.

Job Requirements

1. Bachelor's degree or higher in Computer Science or related fields, with over 2 years of front-end development experience.

2. Proficient in CSS, JS, HTML, etc., with the ability to independently complete page development.

3. At least proficient in one mainstream front-end framework, such as React or Vue; familiarity with React is preferred.

4. Familiar with Web application system development, with some understanding of the HTTP protocol and web servers.

5. Proficient in front-end engineering build tools, with experience in at least one large-scale project.

6. Strong interest and in-depth insights into the latest front-end technologies and implementations in the industry.

Our client is a one of the leading players in the Power & Motor Manufacturing industry. Due to business needs, they are now recruiting a Application Engineer to be part of their Engineer team to support their business needs. They are located in the East - easily accessible.

Job Description of Application Engineer:

• Assist the sales team in identifying optimal solutions during specification processes.
• Collaborate with the global engineering team to address product defects, issues, and technical inquiries.
• Evaluate and recommend engineering products to customers through selection, review, and proposal processes.
• Conduct on-site visits for technical troubleshooting and assessment purposes.
• Communicate effectively with customers to elucidate problems and present viable solutions.
• Cultivate and nurture positive relationships with customers to ensure their utmost satisfaction.

Requirement

• Diploma/ Degree in engineering field
• At least 3 - 5 years relevant experience in handling Marine accounts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare construction drawings such as Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Generate specification requisition for various process instruments, evaluate and select suitable instruments for required process control/monitoring application.
• Preparation of technical proposals (e.g. TBE) and cost estimation for tender projects.
• Preparation Vendor’s Document Review, BMBQ, Man-hour estimation and related.
• Engineering Support at site, attend Field Instrument & Control Inspection, FAT at vendor’s workshop and SAT & Loop Check at site.
• Perform other functions that may be assigned by superior.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 8 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Responsibilities:
* Developing and maintaining a clear and ambitious vision for Wave’s anti-fraud technology, ensuring that our systems evolve to meet emerging threats and business needs.
* Collaborating closely with the team’s product manager to prioritize key initiatives and define the best next steps to build toward the long-term strategy.
* Scoping, designing, and implementing new tools and features that safeguard our users from fraudulent activity.
* Architecting and building the data infrastructure required to effectively analyze and score fraud risks in real time, ensuring scalability and reliability.
* Maintaining the highest bar for code quality, system design, and architecture within the team, ensuring that all solutions are both efficient and maintainable.
* Mentoring and developing your teammates, helping them grow as engineers.

Requirements
* Deep passion for working on impactful software—you want to make a difference by protecting users and fighting fraud.
* Hands-on technical leadership experience—you should have a strong track record of writing code, solving complex problems, and mentoring engineers.
* 7+ years of professional experience in software engineering, data science, or machine learning, with hands-on experience leading technical projects.
* 3+ years experience in designing and building anti-fraud systems—you should be deeply familiar with fraud detection techniques and systems, and have led initiatives that safeguard users at scale.
* Proven experience in building and deploying machine learning models in production.
* Proficiency in Python and experience with data pipelines, machine learning infrastructure, and working with large-scale data.

Stacks involved

* Machine learning infrastructure: Kedro + MLflow
* Infrastructure: GCP / Terraform
* Orchestration: Kubernetes
* Database: Postgres
* Data Warehouse: Snowflake + Fivetran + dbt
* Backend: Python 3 (+ mypy)
* API layer: GraphQL
* Mobile Frontend:Kotlin/Jetpack (Android), Swift/SwiftUI (iOS)
* Web Frontend: TypeScript/React

This is a great opportunity to join my Client as a Commissioning Engineer (Mechanical) to grow your career in a stable and nurturing environment.

Job Description

• Lead the planning and preparation phases by attending supplier kickoff meetings, reviewing supplier documents, and developing commissioning schedules, procedures, and deliverables focused on mechanical systems.
• Supervise the execution of pre-commissioning and commissioning activities on-site, managing interfaces with construction and pre-operations teams to ensure adherence to operational safety systems and company standards.
• Oversee the commissioning process for mechanical systems by managing PTWs, commissioning engineers, and technicians, ensuring successful execution, system certification, and maintenance of commissioning records.
• Collaborate with MC and commissioning teams to ensure timely completion of ITRs and mechanical completions while interacting with engineering departments, vendors, and external stakeholders to resolve commissioning issues.
• Develop and maintain relationships with technical personnel, providing training and support to team members in a multicultural environment, and ensuring the integration of best practices and lessons learned from past projects.
  
  Qualifications:
• Bachelor’s degree in Mechanical Engineering or equivalent
• Minimum of 8 years of experience in EPC projects within the onshore/offshore oil and gas industry.
• Proven track record of commissioning at least three FPSO projects, focusing on marine and topside mechanical systems, with strong technical knowledge in commissioning management and HSSE requirements.
• Proficiency in MS Office, project management software (MS Project/P6), and system completion databases, with the ability to analyze complex progress reports and address issues effectively.
• Excellent communication skills with the ability to lead and influence teams, and experience in offshore plant startup, stabilization, and performance testing, along with knowledge of industry codes, standards, and regulations relevant to mechanical engineering.

Singtel Networks, the most established telecommunications infrastructure provider in Singapore is transforming to enable the digital generation of tomorrow. We are introducing new capabilities in 5G, Cloud, Analytics, Digital Commerce, Software Engineering, Cyber Security to enhance our core competencies and deliver innovative and differentiated Mobile and Fixed services (Broadband, TV and Telephony) for our customers. We are committed to celebrating inclusion and diversity and is a strong believer to upskill and nurture all individuals. Come join us today as we build Singtel’s Networks of tomorrow, and Empower Every Generation to live, work and play in new ways!

Make an Impact by:

• Responsible for automation and process Engineering in Mobile Data Network.
• Responsible for security compliance check for Mobile Data nodes for both on-going projects and routine yearly VAPT check.
• Responsible for the operations of the mobile PNF (Physical Network Function), VNF (Virtualized Network Function) & CNF(Container Network Function) platforms are being maintained optimally.
• Lead and supervise a team to carry out Mobile Data Network change management including patch loading, implementation of software, hardware upgrades and configuration changes on mobile data core network elements like Policy servers (PCRF / PCF) and OCS(On-line Charging system) for both postpaid & prepaid system and its support nodes in a hybrid (Native & Virtualized) environment for both 4G and 5G deployment.
• Lead and supervise a team to drive network / service automation including testing and rolling out new mobile-related products and services for 5G and existing 4G technology.
• Ensure that service quality & performance of Mobile Data (packet switched) related services are maintained at high quality, with minimum service.

Skills for Success:

• Engineering degree preferably in the area of wireless communications.
• Familiar with TCS security compliance checklist.
• Must be a team player coupled with strong communication, organizational and interpersonal skills and be able to work independently.
• Possess good analytical and systematic troubleshooting skills in the area of technical fault isolation and rectification.
• Must be self-driven and energized to embrace new technology and also develop ways to improve customer experience
• Strong interest in system and process automation with good knowledge in automation tools e.g. Ansible. Resolve, UI Patch and RPA.
• Familiar with Mobile technology such as UMTS, LTE and 5G operating in both native and virtualized environment.
• Working experience and familiar with best practices in mobile switching equipment (Ericsson) and virtualized / cloud technology like Openstack/NFVi/Container (Kubernetes)/SDN will be an added advantage

Rewards that Go Beyond

• Hybrid work arrangements
• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Your Career Growth Starts Here. Apply Now!

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

Job Description: QMS Senior/Engineer

Department: Operations – QHSE

Durapower Technology (Singapore) Pte Ltd, a wholly owned subsidiary of Durapower Holdings Pte Ltd, is a leader in designing and delivering customized lithium-ion battery systems for various energy storage applications. Our solutions power a spectrum from hybrid and electric vehicles to specialty vehicles, microgrid, and smart grid technologies, fostering sustainable energy practices.

Role Overview:

We are seeking a skilled and motivated QMS/ QA Engineer to join our team. In this role, you will be responsible for developing, implementing, and maintaining quality management systems in compliance with ISO 9001, ISO 14001, and ISO 45001 standards. The ideal candidate will have a strong background in quality management, environmental management, and occupational health and safety. Reporting to the Quality Manager, your primary responsibility will be to oversee and drive these critical aspects, focusing on sustainability practices within our operations.

Key Responsibilities:

• Develop, implement, and maintain the Quality Management System in alignment with ISO 9001, ISO 14001, and ISO 45001 standards.
• Conduct regular audits and assessments to ensure compliance with applicable standards and regulatory requirements.
• Create and manage documentation for quality processes, including procedures, work instructions, and forms.
• Prepare and present reports on quality metrics, audit findings, and corrective actions to management
• Conduct training sessions for employees on QMS procedures, environmental practices, and safety protocol.
• Promote a culture of quality and continuous improvement throughout the organization.
• Analyze and assess risks related to quality, environment, and safety, and develop mitigation strategies.
• Support management in the identification of potential hazards and the implementation of preventive measures
• Collaborate with cross-functional teams to ensure effective integration of quality management principles.
• Serve as the primary contact for external auditors and regulatory agencies during inspections and audits.
• Liaise with internal stakeholders, ensuring alignment and understanding of quality, environmental, and safety initiatives.
• Participate in closure of Non-conformance report with factory or supplier.

Essential Requirements:

• Proven track record in managing ISO9001, ISO14001, and ISO45001 systems within a related industry context.
• Strong expertise in collaborating with internal stakeholders to drive quality, sustainability, and safety initiatives.
• Familiarity with Singaporean regulatory requirements pertinent to quality, environment, and safety standards.
• Excellent communication skills to effectively liaise with external auditors and regulatory bodies.

Qualifications:

• Bachelor’s degree/ Diploma in engineering, Environmental Science, Occupational Health & Safety, or related field.
• Certified Lead Auditor qualifications for ISO standards are preferred.

What’s in it for you?

• Join a pioneering team driving sustainable practices in green technology.
• Lead impactful improvements in quality, sustainability, and safety, contributing to a greener future.
• Manage a team and collaborate with internal stakeholders to enact meaningful change.

Join Us:

If you are an experienced professional passionate about fostering quality, sustainability, and safety within a dynamic organization, we invite you to be a part of our Operations-QA&HSE team at Durapower Technology (Singapore) Pte Ltd. Apply now and lead the charge towards a sustainable and secure future.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.