Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

About NETS

The NETS Group is a leading payments services group, enabling digital payments for merchants, consumers and banks across the entire payments value chain.

The Group operates Singapore’s national debit scheme enabling customers of DBS Bank/POSB, HSBC, Maybank, OCBC Bank, Standard Chartered Bank and UOB to make payments using their ATM cards or mobile devices at more than 130,000 acceptance points in the country as well as online payments.

Position Overview

Quality Checker team of Card Centre performs quality checks on every card mailers after card personalization, ensuring that we meet our service level on accuracy.

Key Responsibilities

• Responsible for performing quality checks on Bank cards
• Meeting Service Levels of the Banks
• Performing end day reconciliation for internal reporting
• Other ad-hoc duties

Requirements

• Minimun qualification, Nitec
• Prior working experience in production line highly preferred
• Meticulous & eye for detail
• Must be able to commit 5.5 days work week

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 7 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

The Job:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Quality Engineer

Responsibilities:

• Collaborate with departments and suppliers to ensure quality awareness.
• Lead MRB team on OSV activities to meet supplier requests.
• Align with customer quality requirements and business agreements.
• Work with suppliers on line rejection and defective returns.
• Ensure zero defective quality on hand and maintain aging period.
• Support parts localization and collaborate with RD/engineering teams.

Requirements

• Degree/Diploma in Quality/Engineering
• Effective communication with customers, HQ/factory, peers, subordinates, and superior
• SAP knowledge
• Conflict resolution and customer complaint handling

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

The summary of the scope of activity as below:

1. Revise and review SOPs

2. Review executed MBR/EBR

3. Support manufacturing team with any quality interpretation , queries and issues.

4. Provide quality oversight (participate GEMBA walk, GMP walk)

5. Perform archival of QO documents

6. Perform IQ and OQ. Involve in URS, design specifications

Requirements

• Min Degree in science / engineering related courses
• Min 2 to 3 exp of Quality experience from pharma / Medical industry
• Able to start work immediately

Up to $8K (For Senior role) x 1

Up to $6K (For junior role) x 1

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imagination thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Intro

The TikTok Live QA team has been focusing on the high quality and the best user experience of TikTok Live products. Our team uses advanced autotesting tools and comprehensive quality assurance methods to continuously control the delivery of products. We are looking for passionate Quality Assurance engineers to join this fast growing industry.

Responsibilities:

1. Responsible for the quality assurance of ByteDance's live-streaming products;

2. Deeply involved in the product development process, coordinate with various roles to continuously deliver products with high quality;

3. Improve product quality and efficiency through technical means such as tool platform development, automated testing and performance testing;

4. Prospective technology research and application, applying appropriate technology to improve business quality.

Qualifications

Minimum Qualifications:

1. BS degree in Computer Science or equivalent majors, with at least one year of native or backend quality assurance experience;

2. Good computer foundation, master at least one of the programming languages: Python,Java,Go,PHP;

3. Abilities to design and execute complete testing plans for complex projects;

Preferred Qualifications:

1. Master Degree in Computer Science or equivalent majors

2. Good logical thinking and team communication skills;

3. Having systematic work experience in automated testing, performance testing, and quality system construction is preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Bachelor's degree in Engineering or Science.
• Strong systematic and analytical problem-solving abilities.
• Proactive attitude with the ability to handle multiple tasks simultaneously.
• Excellent communication skills and a collaborative team player.
• Understanding of system flow and databases; basic SQL knowledge is advantageous.
  

For Experienced Candidates:

• Proven experience with QA tools such as 8D, FMEA, fishbone diagrams, and AND.
• Solid working knowledge of Statistical Process Control (SPC) and auditing practices.

For Entry-Level Candidates:

• Willingness to learn and adapt to new QA tools and methodologies.
• Basic understanding of quality assurance principles and practices.
• Freshgraduate with part time working experience during Uni time (aside from internship) is a plus.

Responsibilities:

• Same as Associate Consultant but with an increased level of responsibility, including leading the test strategy development and mentoring junior testers.
• Take on more complex test automation projects and drive improvements in test processes.
• Manage cross-functional teams to ensure quality standards are met throughout the development cycle.
• Provide technical leadership for test automation and work closely with Product Owners and developers to ensure optimal test coverage.

Experience and Skills Needed:

• More than 4 years of experience in exploratory testing and automation.
• Proven experience in leading test automation initiatives and mentoring junior team members.
• Strong understanding of Agile testing practices and tools.
• Excellent communication and leadership skills.

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are hiring Contract Quality Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Support Validation Projects: Assist with qualification and validation activities, ensuring compliance with company procedures and regulations.
• Review and Approve Documents: Review and approve validation documents like protocols, reports, and procedures.
• Manage Discrepancies: Identify and address issues in validation protocols, ensuring corrective actions are documented.
• Act as Quality Representative: Participate in cross-functional projects as the Quality Systems and Validation representative.
• Provide Validation Expertise: Offer guidance on creating or updating validation documents, such as for analytical instruments and methods.
• Ensure Document Readiness: Ensure all qualification/validation documents are clear and inspection-ready.
• Support Ongoing Validation: Oversee the Master Validation Plan and support routine qualification activities.
• Collaborate Across Sites: Help standardize validation processes across multiple sites.
• Train and Coach: Develop training materials and provide support to team members and other departments.

Job Requirements

• Bachelor’s degree in Pharmaceutical Sciences, Life Sciences, Biology, Biotechnology, Chemistry, Chemical Engineering, Engineering, or related field.
• At least 2-3 years of experience in quality assurance, manufacturing operations, or validation in the pharmaceutical or biotechnology industry. Experience in equipment, process, cleaning, and computer systems validation is preferred.
• Strong understanding of FDA/EU cGMP requirements, including CFR 21 Part 11, and familiarity with PDA and ISPE GAMP guidelines.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)