As a valuable member of the SCH family, you are an integral part of the care team providing nursing care that matters to rehab and sub-acute patients. Working in a homely environment where there is lesser segregation of duties amongst staff groups, will provide quality nursing care and services in alignment with SCH’s care philosophy of unhurried personalised care. You will facilitate the continuity of care for patients throughout their hospitalisation and transition to home and community.

• Diploma or Degree in Nursing or its equivalent
• Advanced Diploma / Specialist Diploma / Graduate Diploma in Nursing (Gerontology / Orthopaedic / Neuroscience / Palliative Care / Community Nursing) is preferred for Senior Staff Nurse
• At least 3 years experience as Registered Nurse in acute hospital setting
• Experience in ILTC setting is an advantage
• Valid Registered Nurse practicing certificate issued by Singapore Nursing Board
• Valid BCLS certification
• Comfortable with shift work (3-rotating shift) and open to deployment within 2 work sites under SingHealth Community Hospitals
• Uniform required

Duration: Full Time

Location: Central

Working Hours: 5.5 days office hours + Rostered on call (1 week every 2 months)

Job Scope:

- Assist the Radiologist/Cardiologist and other Specialists in Diagnostic Imaging procedure and invasive procedure in CVL. Also inserts brannula at radiologists instructions for contrast examinations.

- Prepare sterile trolleys and sets up equipments/ accessories for Diagnostic Imaging and CVL procedures.

- Perform Newborn Hearing Screening and ECG.

- Ensure that patients fill up the Consent Form for special examinations such as MRI, IVP, CT Scan and other invasive procedures etc

- Ensure that all special preparation for diagnostic imaging is instructed to ward staff/ patient or relatives and complied with.

- Explain the procedure of the special examination to patients and reassures patient whenever required.

- Ensure that all medication chart and documentation notes are filled in properly for the procedure

- Check Emergency Trolley for expiry dates of drugs and instruments

- Ensure that there is an adequate stocks of surgical and pharmaceutical products, dry store, kitchen store and C.S.S.D. store.

- Attend and contributes to departmental staff meetings.

Job Requirements:

- Min. Diploma/ Degree in nursing

- Valid SNB & BCLS

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

• Location: Novena / Orchard
• Salary: SGD 3,500 - SGD 5,000
• Working Hours: 5.5 Days (Mon- Fri 830am-530pm; Sat 830am-1pm)

Job Responsibilities:

Out-patient:

• Assist out-patient clinic
• Provide patient education & counselling
• Maintain consumables & medication stocks
• Assist the Medical Director in the consultation room and procedures both in & outside the Centre

Surgery:

• Maintain stocks & inventory of surgical consumables
• Assist in laser refractive procedures (e.g. LASIK) & other minor procedures
• Upkeep of operating theatre and instrument sterility

Administrative Duties:

• Coordinate with external parties (ie. labs, hospitals, clinics & operation theatre, etc) in the management of patients.
• Coordinate with external vendors for purchasing & maintenance of equipment and services.
• Organise the surgical listing of patients.
• Assist the medical director on all administrative duties relating to the smooth running of the centre.

Job Requirements

• Fully registered with Singapore Nursing Board
• Experience in ophthalmic or surgical nursing will be advantageous.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

• Assist the Medical Director in the consultation room and procedures both in & outside the Centre.
• Assist in laser refractive procedures and other minor procedures.
• Maintain stocks & inventory of surgical consumables and upkeep of operating theatre and instrument sterility.

Requirements:

• Fully registered with Singapore Nursing Board
• At least 2 years of nursing experience in Ophthalmic/Surgical setting

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Requirement: Must have at least 1 year MOT / Day Surgery Experience.

Duration:

Jan 2025- Mar 2025

3 Months Extendable / Convertible

Pay rate: $34/hr

Working Hours:

3-4 Days (OFFICE HOURS)

Office hours

Monday - Friday: 8:30am – 5:30pm

Saturday: 9am - 1pm

Location: Orchard

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Job Scope

• Monitor vital signs
• Assist with personal groomings and hygiene issues Comply with nursing standards according to SNB & MOH
• Mentor junior nursing staff and health attendants
• Plays a central role in providing nursing care to residents
• Assist doctors and senior nuse with preventice and curative medical service
• Inchrarge with general health of the residents and supervise Nursing aides and Health attendants
• Assist and carry out emergency situations in Home

Job Requirements:

• Registered with Singapore Nursing Board
• Diploma in Nursing/ Degree in Nursing
• At least 2 years of nursing experience
• Mon-Fri only

Check out http://abercare.sg/jobs-vacancies/ for more details

Interested applicants may email your updated resume to [email protected].

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504

We are hiring Locum Staff Nurses to be outsourced to reputable hospitals!

The Job Responsibilities:

• Take case, write Report
• Give injection and dispense medication
• Bedside Nursing
• Attend to medical emergencies

The Job Requirements:

• Diploma / Degree in Nursing
• Experienced nurses will be considered for senior positions
• Registered with Singapore Nursing Board
• Possess valid BCLS

Apply now by sending your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

Location: West Coast

At a GP clinic

Working Hours:

31st OCT (PH ) and all weekends of NOV 2024

8.30am to 5.30pm

Requirements :

- Experienced in injections, vaccination injections

- Knows how to perform phlebotomy

- Able to start work immediately!

Interested candidates, kindly send a copy of your resume to: [email protected]

Jessica Fong Zhi Tong [R1879124]

Email Address: [email protected]

Recruit Express Pte Ltd

EA Licence No: 99C4599

Job Responsibilities

• Plan for quality assurance activities with timelines and effort estimates and manage resources to support testing demand.
• Discuss and work with System Analysts & development teams and SMBC to understand the testing requirements to determine testing coverage and collect sample test data (if available).
• Review documentations created by QA Team Lead, Senior System Analyst and/or vendor to ensure quality.
• Track testing activities against test plans and track defects (Log Defect with assigned Severity, Retest and Close Defect) discovered to resolution. Report statistics and statuses to PM.
• Provide guidance and mentorship to the team and ensure process and compliance is met. Provide direction, support and set performance goals to the team.
• Timely escalate issues to manager.
• Support on hiring matters such as interviews where required.
• Onboard new joiners to their roles.
• Coach and guide team members on their jobs.
• Manage and motivate team performance, guided by performance management framework.
• Engage team members to identify and support them on their career aspirations and development plans.

Job Requirements

• Diploma/ bachelor’s degree in computer science.
• Min. 10 years' experiencing working as Quality Assurance Analyst/ Tester in a bank, FI or a consultancy company.
• Familiar with defect management tools.
• Ability to understand technical jargons and some understanding of technology environment setup.
• Possess strong planning skill and is positive and proactive in his/her approach.
• Excellent communication, interpersonal and presentation skills.

The Role

The candidate will play an important role as Technical SME in the development team to support the digitization projects using BPM / Workflow system. The candidate is expected to be involved in all technical aspects of project delivery and/or maintenance from assessing requirements, assessing technical solutions, developing solutions, testing to system implementation. The candidate is also expected to work collaboratively with cross-functional teams to deliver high-quality solutions.

Job Responsibilities

• Analyse, design, develop, customize, implement, and maintain the assigned systems.
• Work closely with Team Leader to gather requirements from the customer, perform technical impact analysis and estimate effort for development.
• Prepare and/or update and review technical documents.
• Manage offshore development teams to ensure technical standards and quality are met.
• Perform code review to detect any potential coding problems.
• Perform unit test and system integration test, support user acceptance test.
• Prepare release procedure and support production implementation.
• Troubleshoot issues and problems to provide workarounds.
• Perform root cause analysis and come up with preventive measures.
• All other duties and tasks as assigned.

Job Requirements

• Bachelor’s degree in computer science or information technology with min. 5 years' experience in software development using Java technologies (J2EE, Spring Framework) and front-end technologies (JavaScript/Angular/AngularJS), preferably in a bank or financial institution.
• Experience in working with offshore team is an added advantage.
• Hands-on experience in deploying, and maintaining, cloud-native Java applications on Microsoft Azure is an added advantage.
• Hands-on experience in Newgen BPM system preferred.
• Good knowledge in SDLC methodologies (Waterfall and/or Agile).
• Good presentation, communication, and coordination skills.
• Proactive and self-motivated.
• Ability to contribute individually and collaborate well in a team.
• Strong sense of accountability and ownership.

Key Responsibilities:

• Periodically review patients to evaluate their progress, ensure high-quality care, and identify any additional care or services they may need.
• Provide supervisory guidance and support to staff members.
• Attend meetings and participate in assigned committees.
• Conduct regular audits of staff performance to track key performance indicators (KPIs) and ensure compliance. Assist in reviewing and updating KPIs to enhance nursing standards if needed.
• Help manage the ward roster to ensure sufficient staffing at all times.
• Take corrective and preventive actions to address or minimize critical quality issues.
• Review patients’ case notes and nursing documentation to ensure records are accurate and meet legal documentation requirements.
• Implement and monitor infection control practices and ensure staff adherence to these protocols.

Requirements:

• Degree in Nursing with a minimum of 6 years of experience in managing and supervisory roles.
• Proven experience in managing a multi-disciplinary ward, inpatient ward, roster manpower
• Must be registered with the Singapore Nursing Board.

Please send in your latest resume to [email protected] or contact Tammy Yap at +65 64160542

*Only shortlisted candidates will be notified*

Tammy Yap Yong Qi (R24121217) | Employment Agency Licence No:04C3537

We are looking for a highly skilled and motivated Team Leader to join our optical clock development team and to lead a team of multi-disciplined metrologists and scientists to support our research programme in next-generation optical clocks. The ideal candidate will have a strong background in optical clock technologies, particularly in the development of lutetium (Lu) clock.

Successful applicant will join our Time & Frequency Laboratory and be responsible to develop a broad range of solutions that enable progress in cutting-edge science of optical clocks that could lead to the SI Second being redefined.

The candidate will need to:

• Lead and manage a team of scientists, engineers and metrologists in the research, design, and development of optical clock systems (e.g., Lu, Sr, Yb clocks).
• Oversee the planning and execution of dedicated experiments to evaluate and validate clock performance and reliability.
• Collaborate with cross-functional teams to integrate optical clock technologies into practical applications and systems.
• Stay updated on the latest advancements in optical clock research and technology and incorporate relevant findings into project strategies.
• Ensure compliance with safety regulations and quality standards in all aspects of optical clock development.

Job Requirements

• Ph.D. in Physics, Engineering, or a related field with a focus on optical clock technology.
• Extensive experience in the design, construction, and operation of optical clock systems, with specific expertise in Lu clocks preferred.
• Proven leadership abilities, including the ability to mentor and motivate team members, manage project timelines, and allocate resources effectively.
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex technical issues.
• Excellent communication and collaboration skills, with the ability to work effectively with multidisciplinary teams.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A*STAR Infectious Diseases Labs (A*STAR IDL) is seeking a Laboratory Officer/ Technician (BSL-3 operations) to join us.

The Laboratory Officer/ Technician will engage in day-to-day operations, housekeeping, maintenance of the high containment (BSL-3) and BSL-2 enhanced laboratories. This role will involve but is not limited to the following:

Job Responsibilities:

• Perform lab biohazard waste collection, sort, autoclave, and safe disposal.
• Liaise with biohazard waste contractor for scheduled disposal.
• Manage laboratory supplies, chemical and equipment inventory.
• Assist in coordination of the lab maintenance, calibration, repair of faulty and recertification of laboratory equipment.
• Coordinate with vendors and service providers to ensure timely delivery of lab supplies and stock checking.
• Track and manage personal protective equipment (PPE) inventory, perform regular checks, and replenish stock as needed.
• Maintain overall cleanliness and organization of the laboratories.
• Able to carry loads such as lab laundry and send for cleaning, drying and redistributing to storage cabinet.
• Perform ad-hoc duties as required to facilitate smooth and efficient operation of the lab.

Job Requirements:

• "N" Level/"O" Level/ITE/NITEC/Higher NITEC/Diploma.
• Minimum 2 years working experience in a BSL-2 laboratory setting.
• Experience in a high containment environment will be advantageous.
• Team player, proactive and possess good communication skills.
• Ability to work independently under minimal supervision.
• Able to wear PPE and don respirator to perform daily work.
• Knowledge of biohazard waste management and autoclaving procedures.
• Familiarity with research animal facility housekeeping.
• Attention to detail and strong organizational skills.
• Willing to learn and ability to follow strict safety protocols and guidelines

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Position title : Registered Staff Nurse
Working Location: Upper Bukit Timah / Potong Pasir area
Working day: Mon - Fri (0830AM-6PM)
Salary : $2800 - $3900

Job overview: As a Staff Nurse, you will play a central role in providing a high standard of nursing care to residents and their family members.

JOB RESPONSIBILITIES

• Complies with approved standards of nursing practices
• Responsible for assessing the needs and delivery of quality geriatric / dementia nursing care to clients
• Perform pre-assessment of new clients refer by AIC
• Ensure the clients’ enrolment complies with the Company’s SOP
• Administer the documentation to be submitted to relevant government body
• Consult and coordinate with health care team to assess, plan, implement, and evaluate client’s conditions.
• Monitor, assess and review clients’ progression and implement holistic care plan
• Provide health promotion, counselling to clients and families
• Perform nursing care such as medication administration and wound dressing and other technical skills as required
• Oversee and manage the performances of the nursing team / care staff to ensure desired level of work competency
• Coordinate, implement, and monitor clinical and service quality performance indicators for continuous improvement plan
• Perform BCLS, CPR, AED and first aid to clients and plays an active role in emergency situations.
• Assist and support delivery of health promotion activities and In-service Education programs in the Centre.
• Participates in clinical service projects, infection control campaign activities.
• Participates in training and development through clinical guidance and direction to junior nurses.
• Utilize clinical judgement, critical thinking and evidence-based care (research based) in the delivery of resident care
• Coordinate continuity of care throughout hospitalization and transition to home/community
• Act as a liaison between residents, care givers and multi-discipline healthcare professionals and communicate effectively on the care plan and discharge planning
• Demonstrate accountability for one’s development and status
• Assume other duties and responsibilities as assigned by SNM / Centre in Charge
• Bedside handling and ward experience
• Coaching nursing experiences for Nurse Aides, Healthcare staffs (Care Assistants)
• Communicate and enforce Nursing & Senior Day Care standards, policies, and procedures.
• Lead infection prevention and control initiatives, including training, audits, and outbreak management.
• Update and review policies, ensuring they align with current needs.
• Develop staff competencies and address skill gaps for new and existing employees.
• Identify and train key competencies for Support Care Staff.
• Oversee standards and competencies of Staff Nurses.
• Collaborate with various departments and allied services for staff training.
• Conduct orientation programs for new staff.
• Ensure compliance with MOH, ENHS, and Clinical standards.

REQUIREMENT / QUALIFICATION：

• Diploma / Bachelor's Degree in Nursing or Certificate in Gerontology
• Registered Nurse with the Singapore Nursing Board
• Valid BCLS + AED Certification
• 2 – 3 years of experience
• Open to travelling to different centres if required.

Liaw Ying Ru Karis Reg No: R24125303
The Supreme HR Advisory Pte Ltd EA No: 14C7279

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Fresh Graduates with strong fundamentals in controls and IIOT are welcome. (For Senior Scientist) 5 years’ experience in research and leadership of R&D projects in the relevant area of expertise.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description

SIMTech is looking for a highly motivated, quick learner with excellent interpersonal skills to join Additive Technology Innovation (ATI) Group. The successful candidate will have opportunities to participate in research and industry projects in additive manufacturing (AM) and be involved in a highly challenging and dynamic research and development environment by working with scientists and engineers. The lab officer’s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group’s research activities through procurement, equipment maintenance, risks assessments, including:

• Hand-on work such as preparing, operating and unpacking AM printers.
• Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.
• Tracking and managing lab and group’s resource utilization, procurement, and delivery.
• Storage space management and optimization.
• Ensure high operational readiness by liaising with vendors to troubleshooting breakdowns preventive maintenance, and repairs.
• Facilitating mechanical and electrical installations for new equipment.
• Assist in lab equipment operation, collection of process data and analysis of results.
• Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.
• Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Job Requirements

• Polytechnic / Technical Diploma degree in Engineering.
• Strong hands-on capabilities.
• Meticulous attention to detail.
• Diligent and possess a positive work attitude.
• Good communication skills.
• Proficient in Microsoft Office.
• Open attitude to lifelong learning and adapts well to new technologies.
• In-depth knowledge / hands-on experience in design for additive manufacturing (DfAM), CAD-based modelling, fusion or sinter-based additive manufacturing processing & metallurgy will be an added advantage.

Key responsibilities:

* Technical Support:

• Work closely with research scientiest and engineers to support R&D projects in advanced manufacturing technologies.
• Identify and recommend appropriate characterization techniques, test standard and methodology for projects.
• Perform sample preparation, equipment operation, data collection and report for metallurgical analysis, materials characterization and measurement.
• Operate and maintain analytical and test equipment, such as cross-section polisher, optical microscope with image processing software, mechanical tester, profilometer and spectrometers.

* Lab Management and day-to-day operations

• Maintain lab equipment in good working condition, lab consumables are adequately stocked and well managed.
• Source and purchase new equipment, modules and accessories.
• Prepare and update lab safety document RA/SWP. Implement and maintain 5S in the lab.
• Provide training and advice for lab equipment users.

Requirements:

• Diploma in Materials, Chemistry, Mechanical Engineering, or equivalent.
• Good communication skills.
• Self-motivated with a positive work and learning attitude.
• Team player who thrives in a collaborative environment

The CPPS group is seeking a highly motivated scientist or senior scientist to lead and conduct research in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls and/or automation. Knowledge of PLC programming would be a strong advantage.

The key roles & responsibilities include, but are not limited to the following:

• Research into novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Working with a team of scientists and engineers to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is needed

Job Requirement:

• PhD degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls and/or automation.
• Fresh Graduates with strong fundamentals in controls and IIOT are welcome. (For Senior Scientist) 5 years’ experience in research and leadership of R&D projects in the relevant area of expertise.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Ability to develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others is a strong advantage
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Key responsibilities:

* Technical Support:

• Work closely with research scientiest and engineers to support R&D projects in advanced manufacturing technologies.
• Identify and recommend appropriate characterization techniques, test standard and methodology for projects.
• Perform sample preparation, equipment operation, data collection and report for metallurgical analysis, materials characterization and measurement.
• Operate and maintain analytical and test equipment, such as cross-section polisher, optical microscope with image processing software, mechanical tester, profilometer and spectrometers.

* Lab Management and day-to-day operations

• Maintain lab equipment in good working condition, lab consumables are adequately stocked and well managed.
• Source and purchase new equipment, modules and accessories.
• Prepare and update lab safety document RA/SWP. Implement and maintain 5S in the lab.
• Provide training and advice for lab equipment users.

Requirements:

• Diploma in Materials, Chemistry, Mechanical Engineering, or equivalent.
• Good communication skills.
• Self-motivated with a positive work and learning attitude.
• Team player who thrives in a collaborative environment

We are looking for one (1) Research Fellow for research activities in the following areas:

1. Theory and computational modeling of electromagnetism in media, plasmonic systems, and metamaterials, including cavity quantum electrodynamics.
2. Inverse design in nanophotonics or quantum nanophotonics.
3. Application of plasma modeling tools like particle-in-cell and magnetohydrodynamics to plasmonic or excitonic systems.
4. Study novel optoelectronic effects in low-dimensional materials and time crystals.

The applicants should have a Master's degree (for the Senior Research Assistant position) or a Ph.D. degree (for the Research Fellow position) in Physics, Applied Physics, Engineering, or Applied Mathematics. Preference will be given to those with a strong publication record, open-minded, independent, and able to collaborate with other team members and experimental partners. Ph.D. students (graduating within 6 months) with relevant expertise are also encouraged to apply. Senior Research Assistants are expected to pursue Ph.D. degrees upon completing the contract if deemed suitable.

Technical requirements:

1. Ability to formulate physical models and solve the formulated equations analytically or numerically.
2. Strong foundation in numerical simulation, including developing and modifying existing codes to include multiple physics.
3. Solid foundation in electromagnetism, quantum mechanics, solid-state physics, material sciences, and computational methods like finite-difference-time-domain, finite-element, particle-in-cell, etc.

At Aleph, we design human experiences by asking the right questions and embracing future-ready solutions. Our team of CreativeEngineers operates at the intersection of strategy, technology, and craft, transforming visionary ideas into human-centered digital experiences. Through lean team models and rapid collaboration, we create solutions that uplift our clients, community, and craft beyond today’s standards.

We are looking for an HCD & Research Consultant who thrives in multi-disciplinary environments and is eager to grow with us. This role blends research, human-centered design (HCD) principles, and modern AI tools to deliver insights that shape impactful digital outcomes. You will steer conversations with stakeholders, helping to align research and design strategy with business goals.

Key Responsibilities

• Passionate about turning data into insights and insights into strategic decisions that influence business outcomes.
• Conducts end-to-end research using HCD principles—ranging from user interviews and usability tests to ideation sessions.
• Collaborates within lean, multi-disciplinary teams to align business priorities with meaningful design outcomes.
• Monitors performance and trends to continuously identify opportunities for improvement and innovation.
• Leads project conversations and ensures research insights steer strategic direction effectively.

Prerequisites

• Comfortable using AI tools to empower research, analysis, and design workflows.
• Stays curious and up-to-date on emerging technologies and trends.
• Skilled in interpreting data and delivering actionable insights through concise reporting.
• Identifies new opportunities for process improvements that align with business and user needs.
• Works fluidly in lean and agile models across multi-disciplinary teams to achieve shared goals.

Benefits

• Competitive salary (compensation will be based on experience)
• Medical insurance
• Yearly reward based on performance
• Casual work environment and attire
• A solid team behind you: great people who love what they do
• A fun culture which promotes learning and knowledge sharing
• Opportunities for personal and professional growth offerings from our in-house Learning @ Aleph Academy, Flocket meetups, timely training for skills upgrade, workshops and conferences.

Get in touch

Please visit www.aleph-labs.com or drop us an email at [email protected].

Aleph is an equal opportunity employer and we work in an engaging, collaborative environment, where ideas are shared freely. By uncovering insights and opportunities, we inspire everyone to dream big towards the future solutions.

Suntory is a global leader in consumer-packaged goods, renowned for producing and distributing a uniquely diverse portfolio of beverages, premium spirits, beer, wine, and wellness products throughout the world. With a history dating back to 1899, we are driven by a profound purpose: To inspire the brilliance of life, by creating rich experiences for people, in harmony with nature. At Suntory Beverage and Food, we boldly move forward together to realize the dreams of becoming a world-leading next-generation global beverage company, always together with Seikatsusha – you are an important part of this and here’s how your role helps us win.

We are seeking an inquisitive and tenacious Assistant Manager, Scientific Research to join our Scientific Research team at Suntory Beverage & Food Asia Pacific. In this role, you will be conducting commercial research to contribute to business. Commercial research refers to developing and validating the efficacies of new functional ingredients for new product development; investigating the efficacies of existing products as well as to discover bioactive compounds or markers that can be used for communication.

Job Responsibilities

• Propose, design and manage biological studies to demonstrate the efficacy and safety of food and/or health supplement products.
• Assess existing science, identify research gaps, and propose studies for new ingredient development for New Product Development (NPD) with deep understanding of consumer needs, health and ingredient trends.
• Assess existing science, identify research gaps and propose studies to support communication of benefits of health supplements and/or to meet health claim regulatory requirements.
• Work with external scientist/professionals/key opinion leaders on research collaborations.
• Manage various aspect of studies, including proposal of research topics, protocol design, budget management, timeline management, statistical analysis results review, manuscript writing, etc.
• Collaborate with cross-functional project teams including regional and local marketing, regulatory affairs and product development teams for business direction alignment and execution of biological studies.

Skills & Experience

• Doctor of Philosophy (PhD), Master, Bachelor Degree in Science, Life Science, Biology or Biochemistry. Other doctorate or Master’s Degree with relevant working experience will be considered.
• Commercial experience in food industry or nutritional products and industrial collaborations is highly advantageous.
• Possess common biological technical skills such as cell culture, western blotting, ELISA, real time PCR, microscopy, etc.
• Experience with cell culture work & screening platform using human/animal cells.
• Possess commercial acumen to link the research to business output
• Strong communication skills - able to explain the science in simple laymen’s terms to non-scientist stakeholders.
• Possess consumer-centric mindset.
• Chemistry skills such as fractionation, peptide isolation and identification highly advantageous.
• Having an understanding of the regulatory environment (especially in Asia Pacific) and health claim requirements for food and health supplements would be advantageous.

The Delta-NTU Corporate Laboratory for Cyber-Physical Systems invites applications for the position of Research Fellow.

Key Responsibilities:

• Achieve efficient search-based motion planning in dense traffic
• Achieve efficient optimization of trajectory with safety guarantee
• Assist in the development of human traffic prediction based on sensory observations
• Test and implement new planning algorithms for robot navigation in dense traffic

Job Requirements:

• PhD in Computer Science
• Research background on motion planning and navigation
• Familiar with popular path planning techniques such as RRT, A* and kino-A*
• Familiar with robot development tools such as ROS
• Fluent English speaking and writing skill - essential for traffic predictions in research work

We regret that only shortlisted candidates will be notified.

I am currently recruiting for a Nurse for a Private Surgical Eye Clinic based in the CBD. This clinic has been established for a number of years' but was recently purchased and rebranded by a new doctor and they are looking to build out a new team to service their patients.

They are looking for you to help maintain the clinics excellent standing and reputation whilst also helping them to modernise and improve.

The Nurse will be responsible for:

• Provide clinical nursing care, assist doctor during procedures, and manage pre- and post-op care for surgical patients.
• Coordinate and ensure availability of surgical instruments, equipment, and supplies; perform medication and supply stock-takes.
• Offer patient counselling for ophthalmic surgeries; must have venipuncture experience.

The Nurse will be / have:

• Min Diploma in Nursing from local polyclinic
• BCLS + AED Certified

If you feel you would be suitable then please get in touch for a further conversation.

Reg No. R1871342
BeathChapman Pte Ltd
Licence no. 16S8112

FOR HR :

Handle full spectrum of HR duties.

• Prepares employees for assignments by establishing and conducting orientation and training programs.

• Ensures planning, monitoring, and appraisal of employee work results by training managers to coach and discipline employees; hearing and resolving employee grievances; counselling employees and supervisors

• Good in Payroll (Using: Time Access) for office and Factory including CPF & Annual income tax submission IR8A

• Coordinates recruitment & selection process, including induction activities.

• Administration of workers movements such as resignations, transfers, promotion, benefits and overseas travel claims

• Handle all work passes related application in WP Online and EP Online

• Handle employees' medical insurance, workmen injury compensation & group hospitalization

• Organize company events, staff communication and HR improvement projects

• Attendance Report, Leave Forms updates, etc

• Prepare monthly reports and HR statistics and Expatriate management

• In charge for receptionist (pick-up call, order stationeries/pantry stuffs)

• Other ad-hoc HR duties as assigned

FOR FINANCE:

- Purchase Invoice accounting, payment to supplier

- Custodian of Cash and Bank Payments and Bank Reconciliation

- Other tasks as assigned.

Requirement:

- Diploma in Accountancy/Business Administration

- Minimum 1 to 2 years accounting experience in financial accounting/HR

- A team player who is self-motivated