Have work experience with private projects for 3 to 5 years

To carry out site supervision and inspection of the works to ensure the works are constructed to required quality and accuracy

Supervision & Inspection for bore piling, ERSS, earth retaining wall & precast work with approved dwg, specification, rule & regulation.

Monitoring in structural material test and checking Method Statements, tests and drawings

Work closely with Consultants, Client & authority and attend progress and technical meetings

Reply some RFA/RFI and Maintain updated drawings/RFA/ RFI, all site records

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Roles & Responsibilities:

1. Review of all geotechnical design drawings to ensure comply with relevant statutory standard, regulations and codes of practices.

2. Project coordination including submission to local authorities and liaison during the construction stage.

3. Co-ordinate with authorities, client and consultants

4. Evaluate subcontractor’s risk assessment, safe work procedures and method statements

5. Plan and execute geotechnical and instrumentation installation and monitoring works

6. Prepare instrumentation reports

7. Site evaluation of soil, rock, fault distribution and geological studies on and below the site to determine their engineering properties

8. Liaise and coordinate with instrumentation contractor for installation and monitoring issues

9. Update instrumentation drawings

10. Responsible for attendance to daily site coordination meeting and provide detail coordination with subcontractors.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline;

2. Minimum 5 years of experience in Geotechnical Engineering especially for LTA Project

3. Be well-aware of Geotechnical Design, Instrumentation & Monitoring process

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as Geotechnical engineer in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior Data Engineer has a role focusing on building our modern Lakehouse including owning pipeline development, data modeling and governance within a cross-functional team responsible for the end-to-end delivery of data products and analytics solutions.Additionally creating CI/CD pipelines for automated deployments and monitoring, and enforce data quality checks, ensuring data consistency, reliability, and compliance.

Key Responsibilities:

Working with Product Owners, Business Analysts and Data Analysts to ensure business requirements are translated into data solutions, deliver accurate and reliable datasets that enable impactful analytics and dashboards.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and inform our solution design with a goal of balancing scalability and performance.

Skills:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.
• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.
• Spark & Azure Databricks: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.
• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.
• CI/CD Pipeline Creation: Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines models using GitHub and GitHub Actions with Databricks.
• Infrastructure as Code: Experience in automating cloud infrastructure management for consistent deployment and scaling using tools like Terraform.

• 5+ Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.
• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Job Requirements:

§ Degree in Information Technology or equivalent

§ Must have minimum 6-8 years of experience in developing software solutions for Java EE web application and Java UI frameworks

§ Must have 5-7 years of experience in Java/J2EE, Spring and Hibernate

§ Must have experience in Agile Development with a good understanding of Agile delivery

§ Good to have Certifications in Java, Java EE etc

§ Excellent written and verbal communications skills

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Controls Engineer (PLC)
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assisting the design of controls system and programming coding to meet the budget and time expectations as defined by the Project Manager.
• Modify controls design and other documents according to the compliance with industry standards according to customer URS.
• Develop specific program per customer and project requirements based on Company's Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience with controls systems and programming
• Knowledge of Allen Bradley and Siemens-S7 programming

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69404 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days), while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 250 million units by 2024. For more information, visit www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU
• Explore architecture and develop micro-architecture.
• RTL development for IPs and SOCs using Verilog
• 3rd party IP identification, selection, and integration
• Collaboration with verification and FPGA teams in test plan development and debug
• Collaborate with the Physical Design team to close the design on timing and power targets
• Assist in silicon bring-up and validation;
• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.
• Possess deep and broad knowledge of current and emerging SOC design technologies.
• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC
• Demonstrate a deep understanding of customer needs and the competitive landscape.
• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output
• Can architect and guide programs across the full range of technical areas.

What You'll Need:

The successful candidate must be self-motivated, creative, and comfortable learning exciting new technologies. This is an opportunity for growth and work on complex, engaging, and challenging projects.

Most importantly, the successful candidate will be able to live the Ambiq Shared Values:

• Innovate: We tenaciously find ways to break down the barriers to possible solutions
• Collaborate: We proactively communicate and encourage each other to be better.
• Focus: We keep the voice of the customer at the center of everything we do.
• Learn: We strive for continuous improvement and are always curious.
• Achieve: We execute on quality and follow through on our commitment

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Responsibilities

• Serves as a subject matter expert in E&I equipment failures and ensures the reliability of those equipment's.
• Provides technical expertise to plant personnel (Supervisors and technicians) on troubleshooting failures, repairs, and ensuring E&I equipment meets the design intent.
• Diagnose and troubleshoot critical and major plant issues related to E&I, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Troubleshoot and maintain PLC (Programmable Logic Controller/SIS), with a strong emphasis on experience with Allan Bradley PLCs.
• Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Supports Team Lead in developing the maintenance budget to support the maintenance strategy.
• Ensure adherence to plant Health, Safety, and Environment (HSE) standards. Actively participate in HSE walkdowns and initiatives to maintain high safety standards.

Requirements:

• Bachelor’s degree in electrical engineering or Instrumentation / Maintenance Engineering.
• At least 3 years of experience in Electrical and Instrumentation Maintenance in a chemical or petrochemical or pharmaceutical plant operations.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities:

• Offer technical support to field service engineers and customers as needed.
• Assess and define performance specifications for vision systems.
• Oversee customer-specific projects and associated documentation.
• Provide technical documentation and training as necessary.
• Contribute to product improvement initiatives.

Requirements:

• 1-3 years’ experience in Engineering discipline
• Vision/Optical Inspection system knowledge; semiconductor manufacturing experience

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

WORKING : 6 DAYS WORK WEEK, 9AM-6PM

Roles & Responsibilities

1) Site work - liaison with subcontractors where necessary

2) Commissioning - testing of devices and provision of acceptance test report and documentation on installation works and equipment information

3) Site surveys - basic RF planning knowledge and have installation considerations (training will be given)

4) Maintains product and company reputation by complying with telecommunication regulations

5) Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of commercial and utility-scale solar power systems

6) Design the arrangements of the solar panels for Rooftop, Ground-mounted, Floating, and other various supported electrical equipment and selection of cables for plant including layouts and schematic diagrams and calculation of technical sizing, BOQ/BOM

7) Analyse costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems

8) Other ad-hoc duties as assigned

Requirements

1) Willing to travel and will be working in Singapore

2) Minimum a Bachelor’s Degree in Engineering, renewable energy or relevant field

3) Minimum two (2) years of relevant work experience

4) Experience and knowledge of reviewing Financial Modelling is preferred

5) Preferably with Energy Industry or Renewable Products background

6) Preferably to have a good track record of solar PV projects

7) Assertive to achieve the KPIs and adaptable both as individual and team player

8) Technical advisors, EPC contractors, BD related roles are welcome to apply

9) Proficiency in autocad

• Excellent communication skills

• Interpersonal skills, active listening

• 1 year previous Service desk or equivalent experience

• Attend to Phone, Email and any other online queries where applicable

• Excellent organisational skills

• Managing incidents including business expectations and communication

• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office

• ITIL Knowledge will be a plus

• Comply to process and procedures

• Administrative tasks

Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent

• Minimum 1 year of relevant working and technical IT experience

• Pleasant disposition and good social etiquette with good spoken and written English

• Good telephony and problem solving / troubleshooting skills

• Good customer service attitude

• Process Driven

• Able to liaise with Customer for daily operations

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

• Evaluate the potential consequences of changes to upstream and downstream systems.
• Develop and maintain programs (shell scripts, SQL scripts) adhering to coding standards and best practices.
• Follow the organization's SDLC processes, creating and updating relevant documentation.
• Participate in system design, review, and improvement, ensuring security and performance.
• Diagnose, troubleshoot, and resolve production issues, implementing both short-term and long-term solutions.
• Perform routine maintenance tasks, including disaster recovery drills and software updates.
• Provide ad-hoc support, data analysis, and troubleshooting to users.
• Manage, maintain, and optimize applications to meet service level expectations.
• Identify and implement improvements to enhance system performance and functionality.
• Coordinate and support production releases, including on-call and after-hours support.
• Proactively identify, assess, and escalate potential risks and issues.

Requirements:

• Hold a master’s or bachelor’s degree in Information Technology, Computer Science, Management Information Systems, Banking and Finance, or a related field.
• Have a minimum of 2 years of experience in MS SQL Server development, including work on SSIS packages, stored procedures, functions, and triggers.
• Demonstrate familiarity with the Software Development Life Cycle (SDLC) process.
• Exhibit strong problem-solving skills and thrive in a dynamic technical environment, with the ability to multitask and deliver high-quality solutions.
• Possess a comprehensive understanding of database management systems.

To apply, please visit www.gmprecruit.com and search for Job Reference: 25015

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

CFB Bots Pte Ltd is a technology service provider specializing in Intelligent Automation. We partner with large enterprises in their Digital Transformation journey and help them and their employees thrive in the Future of Work. Our mission is to co-create the Digital Workforce of the Future, and our vision is to make work enjoyable. For more information, please visit www.cfb-bots.com.

About the Role

We are expanding our operations, and are looking for a Python Engineer to join our team. You will work closely with our clients to implement Python-based RPA solutions within their organizations.

Job Description:

• Conduct meetings to understand the clients’ current work process, pain points, and automation requirements
• Analyse and document business processes, identify areas for optimisation and provide technical solutions
• Construct and implement the overall architecture and design across various systems and applications
• Design, build, and maintain efficient, reusable, and reliable code and automation scripts
• Create and maintain project documentations
• Perform end-to-end testing, troubleshooting and end-user support
• Work on projects and fulfil any other duties diligently as and when assigned by superior

Requirements:

• Degree/Diploma in Computer Science, Information Technology or other related discipline
• At least 2 to 3 years of software development experience using Python
• Familiarity with the Software Development Lifecycle
• Good programming, designing, coding, testing and debugging skills
• Strong logical approach and problem-solving skills
• Passionate about programming and pro-active in finding effective and scalable solutions
• Ability to multi-task and thrive in a fast-paced and dynamic innovation environment
• Good team player with customer centric mindset

In your application, please also indicate the name of the person that you most look up to.

JOB DESCRIPTION – Network Engineer – Routing and Switching (Level-2)

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per security policies and standards.
• Maintain/Update inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

We are hiring Machine Learning Engineer for a technology client on a yearly renewable contract role. The team is building cutting-edge tools and infrastructure to drive innovation and automation throughout the organisation. In this role you will contribute to the creation of new compute layer using Ray and you will help drive the set-up of the infrastructure for Ray on Kubernetes and its integration with the existing Data system

What you’ll do :

• Deliver high-quality AI infrastructure solutions: You will work with the Machine Leaning Platform team to design and develop the infrastructure to support Ray for distributed data processing and model training. You will develop using GitOps to ensure the reproducibility of the system's cloud infrastructure on different Kubernetes clusters.
• Develop observability solutions for Ray: You will be responsible for developing and integrating monitoring and alerting within the client’smonitoring stack powered by Datadog, Prometheus and Grafana. You will also contribute to the creation of runbooks and DevOps guides.
• Support the data science community in adopting Ray: You will work with our product team to socialise Ray's use. You will be responsible for supporting users in running their job on the Ray clusters.

What you’ll need:

• In-depth knowledge of ML-OPS with a solid understanding of distributed computing for data processing. Knowledge of Ray is preferable, but other frameworks, such as Dask, Modin, Beam, Horovod, and Deepspeed, are also valued.
• An understanding of, and ideally experience with, image generation models such as stable diffusion and flux.
• An understanding of ML inference using LLM and other generative models.
• Good knowledge of Python and ML ecosystems.
• Strong understanding of developing and deploying systems on Kubernetes.
• Previous experience with GitOps solutions like ArgoCD is preferred. Good knowledge of Helm and Kustomise is also valued.
• Good DevOps background, with Infrastructure as Code (IaC) such as code with Terraform preferred
• At least 3 years of relevant Machine Engineering experience

If this role sounds like an ideal job move, please hit the apply button with your latest resume alternatively you can email me the resume at [email protected]

Regret only shortlisted candidates will be notified.

CEI No: R1659595 / EA No: 07C3147

Job Scope:

• Assist in the design, analysis, and improvement of mechanical systems and components.
• Support assembly planning and execution, ensuring components meet specifications.
• Troubleshoot and resolve assembly-related technical issues.
• Participate in testing and evaluation of products to ensure quality standards.
• Assist in creating and maintaining technical documentation and reports.
• Help with research and development of new mechanical designs and prototypes.
• Ensure proper maintenance and calibration of assembly tools and equipment.
• Coordinate with cross-functional teams (production, quality, procurement).
• Suggest and implement improvements for assembly efficiency and product quality.
• Ensure compliance with safety protocols and quality control procedures.
• Provide day-to-day technical support to the assembly or production teams.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design (preferred)
• Strong project management skills
• Ability to work independently
• Good interpersonal and communication skills
• Willing to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Role:

• Diagnose and troubleshoot problems with marine engines, auxiliary engines, steering systems, and other related components.
• Carry out repairs on inboard and outboard engines, including work on fuel, cooling, and exhaust systems.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

• Conduct onsite inspections and troubleshooting at client premises.
• Provide hands-on preventive maintenance, repair, and equipment installation.
• Adhere to company field processes and protocols.
• Carry out mechanical/electrical device system upgrades.
• Collaborate with engineers on project management, equipment installation, and maintenance services.