The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Missions and Responsibilities

1.Manage the maintenance systems to achieve performance of all the control systems (DCS, PLC, SCADA, HMI) with the objectives of achieving continual gas supply to the customer, leveraging organizational capabilities in response to business needs of our customers.
2.Ensure all the maintenance activities / records are recorded and maintained in CMMS (CIS).
3.Prepare a monthly maintenance report.
4.Participate in the RCA for all the reliability issues and propose the preventive action plan.
5.Adherence to Job Order / Work Permit system and to maintain zero accident by complying to all Safety rules & regulations in accordance with AL IMS and Workplace Safety & Health Act.
6.Ensuring that the maintenance program is in place and aligned with the maintenance strategy
7.Ensure that operating manuals and facility SOPs are established according to the IMS program of the subsidiary
8.Responsible for quality and safety audit (E&I part), related SOP & RA
9.Provide operation support to execute and complete the PM/CM/SDM on time.
10.Response to address the issues to reduce the down time
11.Identify the critical spare parts and manage
12.Train the operation staff on DCS, PLC and SCADA

Reliability Enhancement Project

1.You will supervise the contractors in your field of competencies with emphasis on safety, quality, schedule, and cost;
2.And manage the interfaces between disciplines and subcontractors;
3.You will plan the mobilization of vendor representatives;
4.And prepare and implement site-specific working instructions and procedures regarding construction utilizing the Air Liquide standards;
5.You will ensure the quality of construction/installation works according to contract requirements;
6.And report safety deviations and data for the site.

Key Job Experience

1.Degree in Electrical/Electronics/Instrumentation/Control Engineering or equivalent.
2.Minimum 7 years of working experience in Gas/Chemical industry preferably.
3.Minimum 3 years experience in maintenance / service / commissioning Oil and Gas or petrochemical industry DCS system such as Yokogawa/Siemens/Honeywell
4.Working understanding of process equipment and technology used in the facility
5.Working understanding of mandatory regulatory requirements applicable to the operations of the facility.
6.Excellent problem solving skills
7.Customer-oriented approach
8.Experience in RCA methodology
9.Loop Testing and Commissioning.

Responsibilities:

• Project technical lead for ICT Projects.
  Support in daily operations on incident management, problem(s) / issue(s) remediation and service(s) restoration.
• Fulfilling of service request(s) related to network voice and wireless following the Change Management procedure. Create and maintain documentations of network configuration, network diagram, mapping, processes, and service records.
• Manage, track and assessment all of principal advisories on patches on vulnerability and firmware upgrades Planning and applying of devices security patches and firmware upgrades.

Requirement:

• At least 5 years of strong experience with in-depth hands-on experience on Cisco Wireless devices and Cisco Voice devices as below:
• Cisco Wireless Controllers
  Aruba Clearpass
  Cisco DNAC
  Cisco ISE
  Cisco CMX
  Cisco Expressway Core and Edge for Jabber, Cisco Auto Attendant, Call Manager
  Cisco Voice Gateway
• At least 3 years supporting a campus wireless network and IP voice infrastructure.
• Candidate with CCNP Wireless and/or CCNP Collaboration or equivalent will be an added advantage.
• Excellent problem-solving skills in a multi-tasking, fast-paced and complex work environment.

Interested candidates, who wish to apply for the above position, please send in your resume to: [email protected]

PERSOLKELLY Singapore Pte Ltd EA License No. 01C4394 EA Reg No: R23118975 (ABDUL RAHMAN ANSARI RAJA)

We regret to inform you that only shortlisted candidates will be contacted.

**********************************

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• Ensure the successful completion of assigned projects, managing both documentation and operational aspects efficiently.
• Attend site meetings with the main contractor to address issues and provide updates to the Directors.
• Plan and monitor site work progress to ensure adherence to the project schedule.
• Collaborate with office staff to prepare monthly progress claims, payment certificates, and similar documentation.
• Verify that work is executed according to approved plans, drawings, and contractual specifications.
• Support and evaluate team performance on a monthly basis.
• Draft method statements as required for specific tasks.
• Oversee and manage materials and equipment delivered to the site.
• Prepare and assist in developing organizational charts for company and supply workers.
• Manage workers' schedules to prevent unnecessary overtime, ensuring prior approval for overtime from the Managing Director.
• Assist with maintaining a site tools sign-in/out record.
• Perform any additional tasks as assigned by the Managing Director.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

• Location: Pandan (moving to Jurong East in 2025)
• Service Engineer in Marine navigation system
• Salary: up to $4,000

Essential Responsibilities:
• Attending ships in terminal, anchorage, shipyard for repair, installation, troubleshooting services.
• Report and documentation as per company procedures (E.g. Update of Software, database, etc.).
• Timely completion of technical and service work report
• Conducting fault-finding process and resolve the technical issue onboard as appropriate.
• Providing technical support both onsite and remotely for company product to the customer.
• Providing support to coordinators.
• Ensuring that the work is executed according to Company Quality, Health, Safety and Environmental guidelines and customer site procedures.
• Ad-hoc duties as assigned by manager.

Requirements:
• At least a Diploma in Electrical and/or Electronics Engineering or related field with at least three years of relevant experience
• Experience in programming, commissioning and service of Marine navigation systems.
• Experience in the hardware and software for the Marine navigation systems
• Excellent product knowledge in SAM Electronics and other navigation System.
• Good communication and teamwork skills.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Alternatively, you may wish to email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705
Tel: 6950 9748
http://www.peopleprofilers.com
[email protected]

Consultant in charge: So Boon Shyen, Debbie
EA Licence Number: 02C4944
Registration Number: R1111376

Maintenance Engineer | 5 Days | Up to $4k | Tuas

Location: Tuas Avenue
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Responsibilities:

• Managing a team of technical supervisors on site to ensure all works comply fully with regulatory and client’s requirement.
• Work closely with our project Management Team, Professional Engineers, Client, Contractors and local regulatory authorities to provide planning, design and supervision leadership including solving site problem.
• Responsible for monitoring all geotechnical and instrumentation works on site to ensure compliance with design criteria and permissible tolerance of instrumentation movements as specified by the Qualified Person(Design)

Requirements:

• Degree in civil Engineering recognized by BCA/IES.ACES with minimum 5 years of relevant experience as a resident Engineer
• Accredited with IES/ACES with a valid Resident Engineer for the past five years
• Relevant experience in supervising substructure construction, bore piling works, structural steel works.
• Candidate must have a strong ability to interpret the drawing and contract documents on works to carried out.
• A good team player and experience in leading a team of Resident Technical Officers
• Candidate must have at least 1 year experience on LTA project

Interested candidates please forward your resume to [email protected].

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

As a member of the HIG HBM Media Health HVM team you will lead and develop a high-performing products driving Media Health Manufacturing and activities within the HBM Product and Systems Engineering Team. You will lead a portfolio of Best-In-Class Next Generation HBM Product focused on the critical KPI’s Quality, Cost, Cycle Time and Scale. You will collaborate across functions within and outside of HBM to meet both strategic and tactical objectives while continually maximizing the effectiveness of the HIG HBM PE organization.

Key Responsibilities:

• Optimized Test Coverage: The responsibility of ensuring optimized test coverage on all current and future HIG HBM design architectures and process nodes is a technical aspect of this role. This is crucial for maintaining the effectiveness and efficiency in high-volume manufacturing.
• Promotion of Innovation: The role involves promoting innovation and driving for changes that will provide Micron with a technical advantage over its competition. This is vital for maintaining Micron’s competitive edge in the market.
• Product Development and Validation: This role is pivotal in developing, validating, characterizing, and qualifying Micron’s next-generation HBM products. Ensuring that these products are reliable and meet the necessary standards is a technical task that directly impacts the market readiness of the products.
• Support for New Product Design Validation: The role provides support for design verification and in-depth circuit of new products using CAD tools and Verilog simulations. This technical support is crucial for the development of new products and technologies.
• Yield Improvement and Cost Reduction: The role involves technical tasks like improving manufacturing test yields (Specifically related to Device Issues from the DRAM, Interface and Stacked Die Yield), reducing test time, and resolving yield-related issues. These activities are critical for cost reduction and meeting yield targets.
• Root Cause and Resolution of Qual and RMA Device Issues.
• Process Conversions and HVM: The role involves providing recommendation to fab teams for new process conversions to reduce cost, increase yields. This is critical as it directly impacts the yield, quality, reliability, and performance of NAND products, which are key components in many modern technologies.
• Risk Management: The role requires communication with Product Managers/Leads to manage risks associated with DPM process conversions. This is crucial in ensuring that the conversions move at an appropriate pace, balancing the need for innovation with the need for stability and reliability.
• Project Management: Developing project management skills within the team ensures efficient execution of projects, leading to timely delivery of technological solutions.
• Technical Decision Making: The role involves making final decisions on risk analysis and project prioritization. These decisions directly impact the direction of technological development.
• Cross-Functional Collaboration: This role necessitates collaboration with various cross-functional teams such as Fab, HBM Technology Development, HBM Design, System Development, and Quality/Reliability team. This collaboration is vital for the holistic development and shipping of end products.

Requirements:

• Bachelor's/Master's in Electrical/Electronic Engineering, Computer Engineering, Computer Science, Data Science.
• Proficiency in software development (e.g., C-based programming) and scripting (e.g., Perl, Python).
• Knowledge of Machine Learning/Deep Learning methodology will be an advantage.
• Strong drive and excellent written and verbal communication skills, including ability to effectively communicate complex technical ideas/concepts.
• Strong analytical and problem-solving skills, with the ability to find creative solutions to difficult problems.
• Effective communication skills in written and spoken English.
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Self-motivation and enthusiasm

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Project Engineer

Salary up to $4000-5000

Working hour : Mon - Fri 8.30am - 5.30pm

Location : Bukit Batok

Job Description :

• Plan, schedule, and manage project timelines, resources, deliverables, and budgets, ensuring cost control.
• Ensure compliance of civil engineering works with project specifications, standards, and quality requirements.
• Oversee on-site construction activities and conduct site inspections to monitor progress.
• Collaborate with architects, contractors, and engineers to address design and construction issues.
• Review and interpret technical drawings, plans, specifications, and prepare detailed project reports and updates.
• Prepare detailed project reports, documentation, and progress updates.

Requirements :

• Posess Degree in Civil Engineering, Structural Engineering, or a related field.
• Min 3 years of relevant experience in construction or civil engineering projects.
• Ability to manage site operations, including labor and contractors, while ensuring compliance with safety regulations.
• Excellent communication skills to coordinate between various stakeholders and lead on-site team

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Tan Zhi Ning
Regisration No.: R23116671

Responsibilities:
• Conduct inspection, trouble shoot and complete maintenance of ship’s main engine remote control system and navigation equipment
• Familiar with ship owners and shipyards working procedures and environment
• Willing to work in local and overseas shipyard as well as anchorage environment at irregular hours which include overnight, weekends and public holiday depending on vessel schedule

Requirements:
• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• ‘Hands on’ experience in Marine Automation
• Those with minimum experience or education level will be consider for Technician

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Remuneration package: Up to SGD$4,500 Basic + AWS + Excellent Variable Bonus

• SINGAPORE Construction project

• Over 30 years of Reputable Engineering Company

• Mechanical or Electrical Engineering Graduates without experience welcome to apply: $2,800 to $3,200

Responsibilities

• Preparation of shop-drawing
• Attending Project meeting
• Manage sub-contractor
• Conduct site testing

Requirement

• Degree, Diploma or NITEC in Electrical or Mechanical Engineering or relevant
• At least 1 years of Mechanical or Electrical Project experience
• Electrical or Mechanical Engineering Graduates without/ No experience welcome to apply

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

My client is a well established local multidisciplinary consulting firm in Singapore.

Location : Central Area

Key Responsibilities:

• Design and implementation of civil and structural engineering solutions across a diverse range of projects, including commercial, residential, mixed-use developments, and infrastructure.
• Coordinate with architects, clients, and project stakeholders to ensure design objectives are met.
• Oversee technical project delivery, including design calculations, specifications, and ensuring compliance with local standards (Eurocodes, Singapore Codes of Practice).
• Provide technical guidance and leadership to junior engineers and drafters, ensuring design integrity and quality control.
• Conduct feasibility studies, risk assessments, and cost analysis for structural components.
• Collaborate with interdisciplinary teams to ensure the integration of innovative and sustainable engineering practices.
• Liaise with regulatory authorities for necessary approvals, ensuring designs are aligned with statutory requirements.
• Attend meetings with relevant parties to resolve technical issues.

Requirements:

• Bachelor’s Degree in Civil or Structural Engineering from a PEB recognized university.
• Minimum of 3 years of relevant design experience in Singapore.
• Proficiency in structural analysis and design software (e.g., ETABS, SAFE, STAAD, SAP2000).
• Strong knowledge of Singapore design codes and local authority submission procedures.
• Demonstrated ability to handle multiple projects and deliver within tight timelines.
• Excellent communication and interpersonal skills, with the ability to work effectively within multidisciplinary teams.
• Strong problem-solving skills.
• With experiences in HDB projects.

Job Summary:

• Located at Ang Mo Kio
• 5 Days Work Week
• AWS & VB
• Up to $4,000

Job Responsibilities:

• Oversee VMware and other VCenter environments.
• Configure and manage Meraki switches, access points, and Fortigate firewalls.
• Maintain and administer Windows servers; collaborate with MS-SQL and IIS servers to support vendor development projects and generate reports through queries.
• Ensure proper maintenance of Windows workstations and laptops.
• Manage backup and recovery processes, and implement disaster recovery plans.
• Collaborate with HQ to ensure compliance with IT standards, including updating ISO documentation as necessary.

Job Requirement(s):

• Minimum 2 years of experience in IT infrastructure management.
• Diploma or Degree in Computer Science, Information Technology, or a related field.
• Able to start immediately
• In-depth knowledge of VMware and VCenter.
• Proficient in SQL and IIS server management.
• Strong experience with Windows servers and workstations.
• Hands-on experience with Meraki and Fortigate products.
• Expertise in Office 365 installation and configuration.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested candidate may submit UPDATED RESUME to 6990 0434 (WhatsApp – Miya) and only shortlisted candidate will be notified.

Join our Telegram Channel for more job opportunitites : https://t.me/+Nm2vlIfzUX43M2Nl

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Kuan Mei Yang

Registration Number: R24124509

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Assistant Operations Supervisor

Salary: $2, 500 - $3, 500
Working Days: Mon - Friday, 8.30am – 5.15pm
Location: Office - Kwong Min Road (Boon Lay) | Travel to site if required

Operational Support:

• Coordinate and prioritize team activities to ensure smooth operations and timely issue resolution.
• Optimize resource utilization including manpower, equipment, and energy to enhance operational efficiency.
• Prepare comprehensive reports on Preventive Maintenance completion, including details on equipment lifecycle, recommended parts replacement.
• Document any parts that were replaced during PM or on Ad-Hoc Basis
• Update the equipment list monthly during the execution of Preventive Maintenance activities
• Ensure that end-end process of procurement of require Parts for maintenance is ordered.

Customer Relationship Management:

• Assist in maintaining strong relationships with customers, dealers, and distributors.
• Collaborate with the Account Manager in addressing key customer complaints and conducting satisfaction investigations to implement improvement plans.
• Conduct training sessions for technicians, customers, and dealers/distributors on the operation and maintenance of Commercial Kitchen Equipment.

Team Management:

• Assist in training technicians as necessary to meet workload demands and quality standards.
• Supervise and manage a team of service technicians and in-house subcontractors.

Contract Management:

• Support in managing contract commitment in terms of KPI (Critical Equipment Reliability; CM Completion Rate; PM Completion Rate, Emergency Response SLA; Hygiene Audit; Compliance to Fire Safety, WSH, GRA and Security Access Requirement; Service Quality Survey).

Health, Safety, and Compliance:

• Drive EH&S initiatives, promote EHS awareness, and monitor compliance within the team.

Performance Metrics:

• Collaborate with the Account Manager to track and improve KPIs such as productivity, field expenses, and Aftermarket Service Sales revenue/margins.

Job Requirements:

• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent practical experience.
• With experience in a similar supervisory role within Aftermarket Service Industry
• Proficiency in Microsoft Business Central or similar tools.
• With understanding of EH&S standards and practices.
• With experience in conducting training sessions for technicians, customers, and dealers/distributors on Commercial Kitchen Equipment

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Min Diploma
• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

• Location: Gul Crescent
• Working Hours: 8.15am - 5.30pm
• Working Days: 5 Days [Monday - Friday]
• Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Location: Gul Crescent

Working Hours: 8.15am - 5.30pm
Working Days: 5 Days [Monday - Friday]
Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431