MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Location: Hougang

Working Hrs: 40hrs/weekly

Responsibilities:

1. Manage day-to-day lab operations

2. Assist students and teachers during science lessons

3. Prepare equipment and materials for hands-on activities

4. Maintain lab equipment, materials, and specimens

5. Keep inventory and breakage records

6. Ensure lab safety and tidiness

7. Care for creatures in the lab (butterflies, chicks)

8. Support CCAs (E2K, Green Club)

9. Distribute teaching resources to science teachers

10. Handle chemicals safely

11. Provide first aid/CPR/AED (preferably certified

Qualifications:

• A minimum of 3 years of company experience in handling manpower services, working in an educational institution providing Science lab assistance.

• An equivalent combination of education and work with a minimum GCE ‘O’ level academic qualification.

• Able to work independently AND has work experience of at least 3 years with Primary school children, age 8- 12 as a Science lab assistance

Skills:

1. Laboratory management

2. Technical assistance

3. Organization and record-keeping

4. Safety protocols

5. Communication and teamwork

6. Basic first aid/CPR/AED knowledge

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for the position of Research Assistant in the Department of Information Systems and Analytics, School of Computing. The School of Computing is strongly committed to research excellence in all its dimensions: Searching for fundamental results and insights, developing novel computational solutions to a wide range of applications, building large-scale experimental systems and improving the well-being of society. We seek to play an active role both internationally and locally in the core and emerging areas of Computer Science and Information Systems.

The Research Assistant will be responsible for working closely with the Principal Investigator and lab members on one or more research projects. He/she should possess experience or interest in at least one of the following research areas:

Key responsibilities:

• Build a tree based private blockchain system for the given specification. It is a tree structure with hash based dependency for validation similar to blockchain.
• Evaluate the tree based system for efficiency, accuracy, scalability, throughput and energy efficiency through simulations with varying data complexities.
• Build an application using the tree based structure and gather insights from users, developers or businesses leveraging BlockForest, focusing on ease of usage/integration and practical benefits.

Only shortlisted candidates will be notified.

Job Requirements

• A Bachelor’s degree with Honours in Computer Science or related area;
• Good knowledge in Blockchain technologies; and
• Experience in research

Chugai Pharmabody Research Pte. Ltd. (“CPR”) was established in Singapore as a wholly-owned subsidiary of Chugai Pharmaceutical Co., Ltd (Chugai), a member of Roche group, in January 2012 and started operations on July 2, 2012. Located at Biopolis in Singapore, it aims to generate new antibody drugs based on Chugai’s proprietary antibody engineering technologies, such as recycling antibody®, sweeping antibody®, bispecific antibody, various Fc engineered antibodies, and other new antibody engineering technologies that are under development.

Research Assistant – Mid-size Molecule Unit

Job Scope:

· Peptide screening - ELISA, bead-based separation etc.

· DNA/RNA analysis - primer design, PCR, qPCR, purification (spin column, magnetic beads, ethanol precipitation, phenol chloroform extraction etc.), electrophoresis (Agarose gel, Urea-PAGE), NGS(Illumina) etc.

· Protein analysis - SDS-PAGE, western blotting, ELISA etc.

Requirements

· Lead identification screening in drug discovery

· Antibody, protein or peptide engineering

· Biopanning, such as phage display, SELEX, in vitro compartmentalization, microfluidics

· RNA-related analytics, protein purification, NGS data analysis, Biomek operation, etc.

· Degree in Biomedical Science/Biochemistry/Chemical Biology/Biotechnology/Molecular Biotechnology with 1-2 years of working experience in a related field.

· Fresh graduates are welcome to apply.

Interested applicants are invited to email their detailed resume, as well as their qualifications, availability, current and expected salary to: [email protected]

For more information regarding our Company, you may refer to our website at:

http://chugai-pharmabody.com/

We regret that only short-listed candidates will be notified

Location: Bukit Panjang

Working Hrs: 41hrs/weekly

Responsibilities:

• Provide customer service at the reception counter to support staff, parents, students, and visitors, including answering phone calls and addressing inquiries.

• Maintaining and updating of data records, filing of documents, inventories etc.

• Preparation of resources for the teaching of Science and Math Department (where applicable) and General Office.

• Assist in any general and ad-hoc duties as assigned by the Admin Manager and School Leaders.

Qualifications:

• At least 3 GCE ‘O’ level passes including English

• Good communication and inter-personal skills

• Good team player

• Proficient in Microsoft Office Application

• At least have 2 years of experience working in a school

environment

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description

• Develop, validate and perform bioassays and bioanalytical assays in compliance with FDA/EMA and GLP guidelines
• Refine current method in response to changing requirements of drug development
• Prepare study plan and study data of assays performed
• Analyse and present data/results
• Document work, results, analyses and findings in laboratory notebooks or study folders as appropriate according to workflow
• Draft SOPs and study reports
• Perform literature review for various drug pipelines and assays as required
• Meet project milestones with set quality
• Ensure scientific integrity of studies conducted and reports submitted

Requirements

• BSc or MSc in biomedical science, life science or equivalent
• Prior research and development experience are required
• Proficient in mammalian cell culture and aseptic techniques is a must
• Experience in ligand binding assays mainly ELISA, cell-based assays, SDS-PAGE, western blot and reporter assays is highly desirable
• Good knowledge of cell based (potency) or ligand binding assays required in drug development process
• Proficient with office software (MS office, Teams), and familiar with statistical tools (Graphpad Prism, XLSTAT or PLA)
• Knowledge of bioassays, bioanalytics and its method validation, GLP and ISO17025 is a plus
• Good written and verbal communication skills
• Superior problem solving and troubleshooting skills, attention to details
• Good interpersonal skills

Job Description

The Centre for Ageing Research and Education (CARE) is an academic research centre in Duke-NUS Medical School. Drawing on its multidisciplinary expertise and collaborations across medical, social, psychological, economic, and environmental perspectives, CARE’s research is situated in eight broad thematic areas: Population Health, Family Caregiving, Community-Based Health and Social Care Services, Productive Ageing, Falls, Ageing and the Environment, Health Communication, and Social and Psychological Aspects of Ageing.

CARE is a vibrant centre with individuals from diverse academic and personal backgrounds, and values the energy, passion, and thought leadership of promising scholars who desire to achieve health, social inclusion, and a high quality of life for older adults in Singapore. At Duke-NUS, CARE works closely with the Health Services and Systems Research (HSSR) Signature Research Programme, a centre of academic excellence for research and education on the organisation, funding and delivery of health services, and a focus is on public health and clinical service innovation in an increasingly complex and connected world.

We are seeking a full-time Research Assistant to join the team. The selected candidate will work across research projects, with the primary responsibilities including but not limited to the following:

• Perform data management including data cleaning, quality and consistency checks, and preparation of codebooks.
• Work with other researchers on interpreting and analysing quantitative data.
• Contribute to preparation of reports, policy and research briefs, presentations, and research papers.
• Conduct follow-up assessments of study participants over the phone.
• Support other project management tasks.
• Assist with other initiatives at CARE where required.

Job Requirements

• Bachelor’s Degree in Sociology, Epidemiology, Gerontology, Public Health, Psychology, Social Work, or other related disciplines.
• Prior work experience in quantitative data analysis will be advantageous.
• Possess strong communication and interpersonal skills.
• Able to take initiatives to learn on the job and manage assigned tasks.
• Motivated and detail-oriented with the ability to work independently as well as with others in a multi-disciplinary setting.

Candidates with relevant work experience may be considered for a Research Assistant (Senior) position.

Please attach a cover letter and a CV, with names and contact information of 3 referees. Applications will be reviewed on a rolling basis. We regret that only shortlisted applicants will be notified.

The National Semiconductor Translation and Innovation Centre (NSTIC) aims to foster ecosystem collaboration and boost R&D translation outcomes in the areas of flat optics and silicon photonics. NSTIC opens up new possibilities in enhancing the performance, efficiency and functionality of semiconductor devices. We are seeking an enthusiastic and self-directed Project Manager to join our team. You will have opportunities to work with researchers from research institutes, universities, as well as industry partners.

Job Description / Responsibilities

• Initiating, planning, executing, monitoring and, coordinating various aspects of projects related to the development and implementation of the technologies under NSTIC
• Ensure timely and successful delivery of the project within budget through the management and control of project risk, scope, schedule, budget and quality
• Manage internal and external stakeholders such as the technical team, NSTIC management, universities, other government agencies and the industry
• Documenting and reporting of project progress and outcomes
• Support other operational activities in the centre

Qualifications / Requirements

• Bachelor or Masters in any engineering / project management related discipline
• At least 3 years of project management experience in semiconductor/microelectronics/photonics or research project
• PMP certifications or equivalent will be advantageous
• Good business acumen, driven to deliver customer requirements and project deadlines
• Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external stakeholders
• Strong communicator with excellent interpersonal skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

The research scientist will be working with a team to carry out basic research in trustworthy formal methods. The topics of interest under this project include trustworthy automated reasoning, verification of randomized algorithms, compiler verification, and control/hybrid systems verification.

Key Responsibilities

• Research and Development: To carry out research tasks relevant to the project scope in trustworthy formal methods as listed briefly above.
• Student Supervision: Co-supervise students (undergrad/masters/PhD level) in relevant research tasks.
• Publication and Dissemination: Disseminate completed research work through publications and presentations at various high-quality international venues.
• Strategic Planning: Participate in other department/institute-level research activities and grant/project proposals.

Job Requirements:

• PhD degree in Computer Science / Mathematics or related fields
• At least 3 years of ecperience
• PhD specialization in formal methods, computational logic, or related topics, with track record of high-quality publications in top-tier venues.
• Proficiency in proof assistants such as Isabelle/HOL, Coq, or Lean will be beneficial.
• Knowledge or experience in cybersecurity will be beneficial.

Desired Attributes

• Ability to deeply investigate the topics of interest, leading to high-quality and impactful research output.
• Applicants should be motivated, resourceful, and analytical individuals.
• Possess good interpersonal, presentation and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

The research scientist will be working with a team to carry out basic research in trustworthy formal methods. The topics of interest under this project include trustworthy automated reasoning, verification of randomized algorithms, compiler verification, and control/hybrid systems verification.

Key Responsibilities

• Research and Development: To carry out research tasks relevant to the project scope in trustworthy formal methods as listed briefly above.
• Student Supervision: Co-supervise students (undergrad/masters/PhD level) in relevant research tasks.
• Publication and Dissemination: Disseminate completed research work through publications and presentations at various high-quality international venues.
• Strategic Planning: Participate in other department/institute-level research activities and grant/project proposals.

Job Requirements:

• PhD degree in Computer Science / Mathematics or related fields
• At least 5 years of ecperience
• PhD specialization in formal methods, computational logic, or related topics, with track record of high-quality publications in top-tier venues.
• Proficiency in proof assistants such as Isabelle/HOL, Coq, or Lean will be beneficial.
• Knowledge or experience in cybersecurity will be beneficial.

Desired Attributes

• Ability to deeply investigate the topics of interest, leading to high-quality and impactful research output.
• Applicants should be motivated, resourceful, and analytical individuals.
• Possess good interpersonal, presentation and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

At NUS Singapore, our people are the driving force behind our success. We pride ourselves on fostering a vibrant and inclusive community of talented individuals from diverse backgrounds.

When you join NUS, you become part of a community of passionate individuals who are dedicated to driving innovation and change in education, research, and service. Our culture of inclusivity and entrepreneurship means that you’ll have the freedom to explore your ideas and make a meaningful impact. Your career at NUS is more than just a job - it’s a transformative experience that will shape your personal and professional growth.

Explore the link provided to learn additional details about the available job opportunity:

https://career44.sapsf.com/sfcareer/jobreqcareerpvt?jobId=27031&company=nationalunP2&st=0E3BD74E502FD1E8A81F87F57FBB93C9D8BC3B07

We are looking for a full-time pre-doctoral student to work as a Research Associate on INSEAD’s Singapore campus. This position is ideal for recent Master’s graduates looking to develop their research skills, with a view of applying to a PhD program. We are looking for someone who is good at managing data and in particular using software packages such as Stata, Python, and R. Ideally, they would also have experience working on a research project in the social sciences. The Research Associate core mission is to assist the school’s Strategy faculty in conducting research.

The Strategy Area at INSEAD is a global thought leader in studying the drivers of superior long-term organizational performance. Our research covers key topics such as artificial intelligence, digital transformation, sustainability, corporate social responsibility, innovation, corporate culture, collaboration, and strategic leadership. We investigate how firms tackle challenges like growth constraints, post-merger integration, and shifting business models, and evaluate the effectiveness of their strategies. Our work employs a range of methodologies, including large-scale empirical analyses, field experiments, and qualitative or ethnographic approaches. While diverse in focus, our research shares a common goal: to generate insights that are both academically rigorous and practically relevant, influencing scholarly discourse and guiding real-world strategies to help businesses and leaders succeed in a dynamic global environment.

The position is for one year, with the possibility of renewal at the end of the first year upon evaluation. It is a full-time position.

TASKS:

• Assist with quantitative research projects in the areas of strategy and management.
• Extract data from conventional databases (e.g., CRSP, Compustat, etc.) or hand-collect and clean data from company documents for analysis.
• Manage and clean data using software packages such as Stata, Python, and R. Proficiency in Stata is strongly preferred.
• Conduct statistical data analysis and assist with the interpretation, write-up, and dissemination of findings.
• Help with reviews of prior literature.

QUALIFICATIONS:

• Bachelor’s or Master’s degree in Economics, Econometrics, Statistics, Finance, or closely related fields, with extensive prior training in econometrics.
• Excellent programming skills that can be applied in software packages such as Stata, Python, or R. Proficiency in Stata is strongly preferred.
• Fluency in written and oral English.
• Excellent academic record and work ethic
• Strong interest in conducting empirical research in management and economics and ambition to pursue a PhD in the future.
• Previous research experience is a strong plus.

APPLICATION:

To be considered for the position, please submit

1. Curriculum vitae

2. Cover letter describing your research experience, motivation and competencies

3. Writing sample (empirical research paper preferred)

4. Academic Grade Transcript

5. Up to two names and contact details of potential references

Applications and letters of recommendation may be submitted by email to [email protected]. Please mention job reference (STRSGP). The review will begin immediately. Applications will be considered until the position is filled.

INSEAD is committed to fostering a diverse and inclusive academic community. We consider applicants for employment without regard to factors such as gender, race, sexual orientation, disability or nationality.

Job Description

We are looking for talented wet-lab Research Fellow to work with a multidisciplinary group of scientists on the discovery of new targets for therapy in Diabetic Nephropathy (DN), a devastating complication of diabetes causing significant morbidity, mortality and human suffering. In Singapore, the incidence of DN as a cause of end-stage kidney disease is among the highest in the world. The job will be part of the NMRC-funded project called Diabetes Study in Nephropathy and other Microvascular Complications II, and it will be based within the Centre for Computational Biology (CCB). This position will be for a period of 3 years, with possible extension depending on work performance and funding availability.

The selected candidate will perform a variety of research activities, which include planning, organising and conducting research studies within the overall scope of a research project under the supervision of the Principal Investigator or his/her designate, including but not limited to the following:

• Independently carry out the design and execution of experimental research required by the research component of the project.
• Write and review research papers, present research outcomes, conceptualise new ideas and develop plans for independent research which could have a considerable influence and impact on the relevant field attracting research funding.
• Provide support for external grant/protocol development, study design and management of research activities.
• Contribute to occasional educational / instructional activities and project management.
• Provide guidance and mentorship to undergraduate / medical students and research assistants.
• Maintain optimal experiment progress in the laboratory or in the research work undertaken.
• Perform other related duties incidental to the work described therein.

Job Requirements

• PhD in a related scientific area (e.g., Life Sciences/Biomedical Sciences, Pharmacology). Candidates with higher credentials may be considered for Senior Research Fellow appointment.
• Hands-on experience with transgenic models (breeding and maintenance) and surgery.
• Experience with rodents (mice/rats) phenotyping, including metabolic traits, biochemistry, histology and microscopy.
• Hands-on experience with wet-lab techniques in molecular and cell biology, including familiarity with primary cell cultures and inflammatory and metabolic cellular assays.
• Possess knowledge and experience in pharmacology and pharmacokinetics.
• Have a system-level understanding of human cardiometabolic pathology.
• Proven track record in the form of peer-reviewed research publications.
• Demonstrated capability of research independence progressively.
• Possess strong writing and critical thinking skills, as well as good communication and presentation skills.
• A team player who is able to prioritise, multi-task and work collaboratively in a diverse workforce.

We regret that only shortlisted candidates will be notified.

Job Description

The Duke-NUS Cancer and Stem Cell Biology (CSCB) Programme studies the causes and treatments of cancer and related diseases. The CSCB research groups have diverse programmes in both basic cancer biology and clinical-translational studies, with a special emphasis on cancers that affect the Asian community in general.

The selected candidate will play a key role in a natural products-based drug discovery program, conducting analytical chemistry, bioassays, compound management, molecular and cell biology, and biochemistry laboratory experiments under the supervision of the Principal Investigator or his/her designate, including but not limited to the following:

• Support all aspects of the research project.
• Conduct extractions and fractionation of natural products.
• Execute cancer and other mammalian cell culture assays.
• Carry out antibacterial and antifungal assays and assist with microscopy imaging of cells.
• Perform molecular and phenotypic analyses to understand mechanism of action.
• Conduct accurate monitoring, documenting and reporting of experimental results and/or research findings.
• Assist with general upkeep of laboratory needs, procurement of reagents, maintain safety protocols, provide technical support and establish work procedures to ongoing research projects.
• Perform other related duties incidental to the work described therein.

Job Requirements

• Bachelor’s or Master’s Degree in Analytical Chemistry, Chemical Biology, Pharmacology, or other related fields. Candidates with higher credentials may be considered for the Research Assistant (Senior) position.
• Familiar with organic and analytical chemistry techniques, including chromatography and HPLC.
• Demonstrated knowledge and possesses experience in cell and molecular biology techniques such as cell culture, western blot, RNA and DNA isolation, and RT-qPCR.
• Strong interpersonal communication skills with excellent written, and computer skills.
• Well-organised and excellent record keeping skills are a must.
• A strong team player who is open-minded, energetic, highly motivated and can work collaboratively in an interdisciplinary team and diverse workforce.

We regret that only shortlisted candidates will be notified.

Job Description

The Duke-NUS Cancer and Stem Cell Biology (CSCB) Programme studies the causes and treatments of cancer and related diseases. The CSCB research groups have diverse programmes in both basic cancer biology and clinical-translational studies, with a special emphasis on cancers that affect the Asian community in general.

The selected candidate will play a key role in a natural products-based drug discovery program. He/she will work both independently and collaboratively to analyse complex natural products using NMR and mass spectrometry, including metabolomic profiling to identify potential molecular targets and mechanisms.

• Independently carry out the design and execution of experimental research required by the research component of the project.
• Write and review research papers, present research outcomes, conceptualise new ideas and develop plans for independent research which could have a considerable influence and impact on the relevant field attracting research funding.
• Provide support for external grant/protocol development, study design and management of research activities.
• Source financial support for research activities by investigating potential sources of funding, collaborate with Principal Investigator to write and revise grant/fellowship applications.
• Provide guidance and mentorship to junior researchers.
• Ensure optimal progress of experiments in the laboratory by conducting, supervising, and evaluating laboratory procedures and outcomes. Revise and analyse targets to obtain high-quality and reproducible results.
• Perform other related duties incidental to the work described therein.

Job Requirements

• PhD in Chemistry, Chemical Biology, or related discipline with 2 years of relevant post-doctoral experience.
• Demonstrate general expertise in the field of natural products isolation, metabolomics, and global profiling.
• Strong NMR and mass spectrometry skills in compound characterisation.
• Familiar with database and networking platforms for dereplication (e.g., GNPS).
• Proven track record in the form of high impact publications.
• Strong writing and critical thinking skills, as well as good communication and presentation skills.
• A team player who is able to prioritise, multi-task and work collaboratively in a diverse workforce.

We regret that only shortlisted candidates will be notified.

Job Description

The Cardiovascular and Metabolic Disorders (CVMD) Programme at Duke-NUS houses state-of-the-art technologies for profiling mitochondrial function and metabolic adaptations in model organisms and undertakes translational research in cardiovascular and metabolic disorders. The program has a strong track record of publication in top-tier journals, successful commercialisation efforts leading to spin-offs, as well as nurturing early career researchers into independent academic or industry positions.

Metabolic dysfunction-associated steatohepatitis (MASH) is a severe metabolic liver disease that can affect up to 6.5% of the adult population, with only one FDA-approved drug. Dr. Jin Zhou’s team is specialised in studying the novel molecular pathogenesis underlying MASH for the identification of new druggable targets. The lab uses a combination of biochemistry, genetics, animal modeling, and metabolomics approaches to understand cellular processes related to mitochondrial function and hepatic lipid metabolism.

We are looking for a highly self-motivated Research Fellow to join the team. The selected candidate will perform a variety of research activities, including but not limited to the following:

• Independently carry out the design and execution of experimental research required by the research component of the project.
• Maintain optimal experiment progress in the laboratory or in the research work undertaken.
• Maintain accurate and complete records of all findings and ensure the validity and reliability of data at all times.
• Present research outcomes orally, and draft research abstracts and manuscripts for publication.
• Provide guidance and mentorship to undergraduate/medical students and research assistants.
• Perform other related duties incidental to the work described herein.

Job Requirements

• PhD in Biomedical Sciences, Molecular Biology, Cell Biology, Pharmacology, or related disciplines.
• Hands-on experience with mice models, as well as wet-lab techniques in molecular and cell biology. Prior experience in polysome and/or ribosome profiling would be advantageous.
• Proven track record of academic publications, including writing/drafting first-author papers.
• Demonstrate excellent communication, technical independence, and analytical and problem-solving skills.
• Self-motivated individual, enthusiastic to take initiative, and able to work independently and collaboratively in a team.

We regret that only shortlisted candidates will be notified.