1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

JOB RESPONSIBILITIES AND DESCRIPTION

• Support Logistics department in the management of Lean Transformation programmed through the implementation of Lean initiatives and Kaizen events.
• Lead and champion LEAN, quality improvement and change management vis-à-vis the alignment with the company’s business goals.
• Facilitate and drive Lean implementation across the company through the development of training framework, project cycle framework, etc; and guide the Lean teams in project implementation to achieve the project goals.
• Review and drive Lean standardisation and consistency approach with respect to workflow and problem resolution processes.
• Work closely with internal and external stakeholders in executing and implementing existing or new policies and procedures as well as to ensure company procedures, processes and practices are in compliance with company standards and regulations.
• Lead the team in measuring and analyzing the effectiveness of improvement processes, including performing benchmarking exercise against industry standards.
• Review and establish Lean accreditation framework to audit Lean value stream activities at business units.
• Review and establish Lean role mandate for all levels of the organization.
• Review the organization’s Lean capability needs and work with the organization to establish the coaching requirements of Lean trainers, facilitators, specialists and staff to sustain high standards of staff proficiency.
• Assess and certify in-house Lean trainers and facilitators upon completion of required training and demonstrated competencies.
• Expand and sustain the Lean deployment efforts through establishing Kaizen and continuous improvement events.
• Gather data and compile meaningful reports for customer data analysis and internal data quality scoring.
• Analyze customer and campaign data - focusing on data that accurately measures actionable results.
• Develop ongoing and ad-hoc reports to track key performance metrics, Lean transformation progress.
• Assist in creating and maintaining client-facing & internal business-reports/dashboards.
• Reviewed documents for completeness, accuracy, and authenticity by performing quality/lean reviews and complying with document control procedures and any relevant documents.
• Perform any other duties as assigned by Senior Management.

JOB REQUIREMENTS

• Diploma or Bachelor Degree in Business or relevant quantitative disciplines.
• More than 3-5 years of relevant experience, ideally in Lean implementation and sustainmentStrong expertise in Lean principles, and is the go-to person to seek advice in Lean methodologies, including value stream design, implementation and sustainment.
• Excellent project management skills, detailed and merticulous.
• Proven leadership success in driving Lean in a large organization.
• Great leadership with good interpersonal skills in leading and motivating a team, influencing and driving changes across operations, business units and customers.
• Demonstrated experience with development processes- particularly design controls, risk management (ISO Standards), and documents/process controls.
• Familiar with Singapore and regional GDPMDS and ISO standards would be an advantage.

Introduction:

Yoshimura Food Holdings is a leading Japanese company with a diverse portfolio that includes processed foods, agricultural products, and seafood, with a strong commitment to quality and sustainable practices. With a legacy of excellence and publicly traded on the Tokyo Stock Exchange, Yoshimura is dedicated to provides premium seafood products renowned for its quality and taste.

Actively hiring Senior Sales Executives to join our growing family to drive growth and building lasting relationships. Join us in shaping the future of foods. Explore opportunities at Yoshimura today!

Responsibilities:

• Manage clients’ relations and build contacts with potential clients for new business opportunities.
• Responsible for planning and implementing market penetration strategies and sales targets and for building strong relationships with existing clients.
• Identify leads and lead new business opportunities to expand distribution channels / networks.
• To exceed or achieve monthly sales targets / new business development served in the assigned area.
• Track, monitor and analyse products, channels and customers sales trends in order to maximise sales opportunities and achieve desired sales results.
• Carry out and plan other sales and marketing functions to increase efficiency.
• Take initiative in implementing best practices to perform duties.

Requirements:

• 3 years of relevant experience in foodservice sales or business development within FMCG or Seafood industry
• Proven sales experience meeting or exceeding targets
• Proven ability to drive the sales process from plan to close
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint)
• Able to multi-task and work independently
• Strong interpersonal and communication skills
• Min. Diploma in business or related field

Introduction:

Yoshimura Food Holdings is a leading Japanese company with a diverse portfolio that includes processed foods, agricultural products, and seafood, with a strong commitment to quality and sustainable practices. With a legacy of excellence and publicly traded on the Tokyo Stock Exchange, Yoshimura is dedicated to provides premium seafood products renowned for its quality and taste.

Actively hiring Senior Sales Executives to join our growing family to drive growth and building lasting relationships. Join us in shaping the future of foods. Explore opportunities at Yoshimura today!

Responsibilities:

• Manage clients’ relations and build contacts with potential clients for new business opportunities.
• Responsible for planning and implementing market penetration strategies and sales targets and for building strong relationships with existing clients.
• Identify leads and lead new business opportunities to expand distribution channels / networks.
• To exceed or achieve monthly sales targets / new business development served in the assigned area.
• Track, monitor and analyse products, channels and customers sales trends in order to maximise sales opportunities and achieve desired sales results.
• Carry out and plan other sales and marketing functions to increase efficiency.
• Take initiative in implementing best practices to perform duties.

Requirements:

• 3 years of relevant experience in foodservice sales or business development within FMCG or Seafood industry
• Proven sales experience meeting or exceeding targets
• Proven ability to drive the sales process from plan to close
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint)
• Able to multi-task and work independently
• Strong interpersonal and communication skills
• Min. Diploma in business or related field

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide.

We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

Personal Assistant to Senior Management

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is establishing a multi-discipline project team and corporate team to facilitate and ensure timely implementation of power generating station projects and thereafter, operation and maintenance of the power generating station. We are inviting applicants for the position of Personal Assistant who shall report to the Head (Human Resource). The scope and requirements are as follows:

We require the Personal Assistant to be highly organised and proactive in providing comprehensive support to our Senior Management team. The ideal candidate will possess exceptional communication skills, a strong attention to detail, and the ability to manage multiple tasks efficiently. This role requires discretion and the ability to handle confidential information with professionalism.

Roles and Responsibilities:

• Calendar Management of Senior Management including travel management and planning
• Organise and schedule meetings and events, including arrangement of venues, preparing agendas and materials
  
• Assist in the preparation of reports, presentations, and other documentation as needed. Ensure all materials are accurate and delivered on time.
• Minutes taking and ensure timely follow up on action items
• Act as the primary point of contact between Senior Management and internal/external stakeholders, i.e. handle phone calls, emails and correspondence.
• Provide administrative support, including email correspondence, document management, admin building, pantry, facilities logistics, events planning and setup
• Other admin duties – obtaining supplies, sorting/distributing mails, general office administrative tasks.

Requirements:

• Education in Business Administration, Management or related field
• Proven experience as a personal assistant, preferably supporting Senior Management
• Exceptional organizational and time-management skills
• Strong written and verbal communication skills
• Ability to prioritise tasks and work independently in a fast-paced environment
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Duties & Responsibilities:

1. The Construction Manager shall play a key role in the conceptual development of the various construction projects and oversee its organization, scheduling, and implementation
2. He/She will be required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control
3. Responsible for cost management to manage projects within approved budgets, include materials, manpower and machinery cost control for new and running projects
4. Responsible for exercising timely instructions to deal with the results of delays, or emergencies at construction project sites
5. Reviewing manpower planning and monitoring of work schedules to ensure orderly delegation of jobs and smooth operation. Ensure to exercise effectively safe and economical methodology and enforces project standards
6. To maintain close collaboration with Project Managers, Architects, Engineers and all stakeholders to minimise errors in the process to achieve smooth completion of projects
7. To liaise closely with clients, consultants, sub-contractors, relevant authorities and developers in resolving site issues and authorities compliance issues

Requirements:

1. 10 years relevant working experience within the Construction industry
2. Should possess a minimum qualification of Degree in Engineering or Architecture or equivalent qualification
3. Ability to prioritize tasks well and able to work independently
4. Able to work under stress and complete tasks within set deadlines

Responsible for operational requirements to ensure professional, efficient delivery of the company's services.

- managing sales cycle (proposal, negotiation, booking).

- working closely with the Technical/Services/Training team to ensure fulfilment of projects in a timely manner whilst ensuring budgets are met.

- manage non-technical services aspects to ensure professional, efficient delivery of services.

- ensure training teams are operating effectively.

- support marketing team initiatives including market research, promotion & cross-selling of company's products & services.

- define and lead local team to delivery according to business plan & budget.

- participate in internal and external ISO audits.

- shall be required to perform other related duties as requested to met the ongoing needs of the organisation.

For our business success and our people growth, you will lead and run all production and laboratory teams at the Tuas site while in compliance with relevant WSHE regulations and company operating procedures with collaboration with our great talents from all over the world.

Principal Duties and Responsibilities:

• Take the leadership of various project in factory
• Provide site leadership for EHS programs and sustainability efforts to maintain compliance and continuous improvement and ensure all activities performed on the site are performed with safe operation.
• Drive a focus on quality with the goal to provide the outstanding quality to the industry and build a proactive environment that identifies and solves problems for our customers' success.
• Develop and execute a multi-year plant investment plan in coordination with business leaders and business partners
• Encourage and develop the production team for greater performance.
• Implement and share best practices with the global production team.
• Coordinate communication and interactions with governmental agencies, including requests for information, investigations / inspections and enforcement activities.
• Participate and support ISO 14001 and ISO 45001 certifications.
• Performs other duties as assigned by the Managing Director.

Qualifications & Experience:

• Bachelor of Science degree in engineering, chemical engineering preferred.
• Demonstrated ability in a production environment with proven experience leading a team.
• Experience in multi-functional administrative functions
• Experience working with independent standards organizations and certification programs such as ISO 14001, ISO 45001, etc.

Skills and Abilities / Core Proficiencies:

• Strong “consultant” skills, including the ability to influence and empower leaders and employees through collaborative engagement and building/maintaining relationships.
• High energy, motivation and dedication to take personal ownership of issues and drive them to outstanding outcomes.
• Strong business and commercial acumen
• Excellent verbal and written communication skills with a broad range of audiences.
• Ability to read, analyze and interpret technical reports and documents/standards, make sound judgments, and offer effective solutions.
• Ability to successfully lead and develop personnel and work in a team.
• Ability to handle and process confidential / critical information discretely
• Ability to work collaboratively and effectively in a team environment across multi-site organizations
• Ability to travel up to 10% of the time is required

Supervisory Responsibilities

• Plant Production Team
• Plant Laboratory and internal Quality Teams
• Plant Planning Team
• Plant Maintenance Team
• Indirectly lead plant capital engineering

ADMIN MANAGER

5.5 -Day Week

9.00am to 6.00pm / 9.00am to 1.00pm

Job Requirements:

• To assist the team members in daily operations
• Able to hold a conversation well
• To be able to communicate with colleagues as well as customer
• Ability to work as a team
• To assist in invoicing, quotation, and purchasing etc
• Ability to multitask and work independently and in teams
• Very willing to learn, have initiative and a self-starter
• To handle software for issuance of paperwork
• To be able handle customer enquiry
• Ad-hoc assignments and tasks as assign by director

With 1500 employees worldwide, a Swiss company BAUMANN Springs (www.baumann-group.com) established in 1886 is a leader in the world of Springs, Stampings and Solutions. Running with the 5th Generation in place and our guiding principles of Time, Together and Inspiration, our employees Care, Compete, Learn and Celebrate universally.

With the growing requirements of our major customers, our presence in Asia was established as early as 1979. Within the site in Singapore, the strength of 100 dedicated, diligent and focused employees exploits the know-how acquired over the decades to manufacture and develop custom-made products and technologies. Strong partnerships are established with international customers in key industries of Automotive, Industrial and Medical. An opportunity arises and BAUMANN Springs in Singapore is currently looking for:

Career Opportunity for a Production MANAGER

Able to lead and contribute to achieve organization’s goal towards excellence and advancement. We want someone with the ability to communicate effectively, dedicated, passionate with a positive attitude to inspire and create followers. If you possess strong analytical ability, is creative and confident, we want you.

Responsibilities:

The Production Manager will take the lead in ensuring production, including the development of procedures and knowledge transfer to the operations team

· Report to the Plant Manager, fully responsible for the customized products, varieties and operations of the

customized manufacturing process.

· Responsible for the production system planning and management - planning, formulating and implementing

process strategies, roadmaps, and updating iteration plans

· Responsible for data analysis and promote data exchange between the entire supply chain including quality and

safety.

· Responsible for coordination and communication with the sales and engineering team on the process from

design, development to launch, and promote the achievement of product goals

· Cooperate with the logistics department to ensure that all deliveries are met promptly according to

commitments to customers.

· Work closely with the Sales and engineering team, involve in business planning strategies

· Responsible for ensuring the core personnel of each process are in place and carry out as per process flow and

product specification.

· Other tasks within the scope of responsibility

Requirements:

· Degree or a good Diploma in an engineering discipline, or equivalent

· More than 8 years of experience in Operation and management

· Mandatory to have interest and strong operational and executional experience

· Understand industrial trends, rules, and business logic and I4.0

· Have a keen sense of commitment

· Strong analytical skills, problem solving skills, critical thinking

· Strong business acumen, be customer focused, team and results-oriented

· Able to read drawings and industrial application material science

- Experience with ISO 9001/ IATF 16949/ ISO 13485 and QA system added advantage

Work location:

Located in the Tuas Area – Gul Lane

5 days’ work week

Interested candidates, email resumes in MICROSOFT WORD format, stating current, expected salary, date of availability and reason for leaving current employment to:

[email protected]

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Responsibilities:

• Work on RFPs and Tenders and to prepare for submission and presentation.
• Lead and manage projects by working collaboratively with client and support teams from start till end of project.
• Liaise and coordinate with support team and subcontractors on project requirements.
• Plan & manage overall project schedule.
• Manage project budget & cost control.
• Control site management
• Administer routine management reporting & updates.

Requirements:

• At least 4-5 years of working experience with proven track records in project management.
• Strong knowledge of construction details, materials, methodology, building and regulatory standards.
• Possess meticulous and strong planning and co-ordination skills.
• Ability to work effectively within a collaborative team environment.
• Ability to perform under tight schedules and deadlines with minimum supervision.
• Good managerial and interpersonal skills.

Responsibilities:

• Identify and mitigate risks in contract terms, providing expert advice on contract clauses, obligations, and liabilities.
• Evaluate contractual risks and implement effective risk mitigation strategies.
• Ensure compliance with legal and regulatory standards, staying informed of changes in construction and contract law.
• Oversee the full contract lifecycle from initiation through project completion and closeout.
• Monitor contract performance to ensure deliverables meet quality, cost, and timeline requirements.
• Manage variations, claims, and scope changes, assessing their impact on contract terms and project objectives.
• Ensure contract budgets align with financial targets by tracking project expenses and revenue.
• Approve and process payments to contractors and subcontractors, ensuring accurate billing and invoicing.
• Serve as the main point of contact for contract matters with project teams, clients, subcontractors, and suppliers.
• Communicate contract requirements, modifications, and potential issues clearly to all stakeholders.
• Address conflicts and disputes that arise during project execution, collaborating with legal teams as needed.
• Ensure fulfillment of all contractual obligations, conducting regular compliance audits.
• Supervise and mentor junior contract managers, providing guidance on complex contract matters.
• Lead training sessions for the team on best practices in contract management, risk mitigation, and compliance.

Job Requirements:

• Bachelor’s degree in Construction Management, Quantity Surveying, or a related field
• At least 10 years of experience in contract management and administration, specifically in the construction industry
• Extensive expertise in contract negotiation and administration
• Relevant experience in both public and private sector projects in Singapore
• Experience managing subcontracts effectively

Strong knowledge and practical application of local Conditions of Building Contracts

Responsibilities:
• Manages and leads a program involving one or more functions and project teams to drive the engineering development and implementation process for a subsystem or component of a product or service offering.
• Develop schedules, critical deliverables, budget, resource allocation plan, and other support requirements for assigned program.
• Coordinates activities of supporting project teams and internal and external development partners; tracks progress against established plan and makes decisions to alter or update schedule and resource allocation to meet product requirements and development schedule.
• Communicates program progress, escalations, and issue analysis to product stakeholders; collaborates with management and internal manufacturing and development partners to implement changes to product, process, or program plan to resolve escalated issues, produce solutions, and ensure adherence to budgets and established product roadmaps and schedules.
• Leads and provides guidance and mentoring to less-experienced staff members.
• Work closely with the system team and ODM for the commodity qualification plan/IUR configuration arrangement and resource review to complete the qualification on time.
• Tracing the commodity qualification status and working with the engineering team for issue debugging and solution implementation.
• Join the core team meeting to communicate the commodity status to the system team and highlight the critical issues.
• Create the mitigation plan for shortage risk.
• Work with the system team / ODM and coordinate cross-functional team to arrange resources to achieve the urgent qualification request.

Education and Experience Required:
• Bachelor’s or master’s degree in business management, Engineering, Computer Sciences, or equivalent.
• PMP/PMI certification preferred.
• Typically, 4-6 years’ experience. (with Panel or Camera or Battery industry field is plus)

Knowledge and Skills:
• Using project planning tools and software packages to create, manage, and track project results.
• Strong analytical and problem-solving skills.
• Demonstrated experience coordinating and directing matrixed teams and resources.
• Ability to create and manage program schedules, budgets, and resource allocation plans.
Ability to effectively communicate program plans, proposals, and results, and negotiate options at management levels

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Assists Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements
• Understand the contract and scope of work for topsides with sub-contractor
• Prepares key project documentation as per project specification requirements
• Manages project topsides related drawings and controls technical documentation across disciplines
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget
• Assists topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assists topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Supports topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Reviews the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull
• Co-ordinates between discipline to utilize the shared license based-on work priority;
• Monitors & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer
• Records & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager
• Expedites the information required by each discipline prior to start & complete the topsides design works
• Monitor 3D model clashing issues with other discipline
• Prepares Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM
• Assists topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering
• Minimum 10 years working experience in offshore oil and gas project managing topsides design works
• Able to liaise with internal and external parties
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Location: Jurong West

Salary: $4000-$5500

Manufacturing industry

Have AWS & bonus

Job Description

• Contract preparation, review and negotiation support
• Review contracts for sales, construction, purchasing/procurement, or EPC (engineering, procurement and construction) and other commercial matters. Direct participation in negotiation may be requested depending on situations.
• Tasks include support for seeking approval from headquarters on essential deals, by providing certain explanation on the matters
• Update existing standard contracts, systems and procedures, provides training and guidance to internal clients.
• Dispute resolution support
• Support business teams to solve emerging and actual claims and disputes, litigations and arbitration.
• Policy making and corporate governance support
• Draft, update and arrange policies of regional entities, and liaise and coordinate necessary documentation with General Manager of Legal and with the headquarters to fulfil its corporate governance requirements.
• Training preparation and hosting
• Manage the corporate secretarial matters such as annual general meeting and board meeting of affiliate entities within the region.

Requirement

• At least 4 years relevant working experience
• Willing to travel

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Location: Jurong West

Salary: $4000-$5500

Manufacturing industry

Have AWS & bonus

Job Description

• Contract preparation, review and negotiation support
• Review contracts for sales, construction, purchasing/procurement, or EPC (engineering, procurement and construction) and other commercial matters. Direct participation in negotiation may be requested depending on situations.
• Tasks include support for seeking approval from headquarters on essential deals, by providing certain explanation on the matters
• Update existing standard contracts, systems and procedures, provides training and guidance to internal clients.
• Dispute resolution support
• Support business teams to solve emerging and actual claims and disputes, litigations and arbitration.
• Policy making and corporate governance support
• Draft, update and arrange policies of regional entities, and liaise and coordinate necessary documentation with General Manager of Legal and with the headquarters to fulfil its corporate governance requirements.
• Training preparation and hosting
• Manage the corporate secretarial matters such as annual general meeting and board meeting of affiliate entities within the region.

Requirement

• At least 4 years relevant working experience
• Willing to travel

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Description:

The incumbent shall be responsible to:

• Coordinate and participate in a variety of duties involved in the operation and maintenance of cardiovascular equipment to provide detailed analysis of cardiovascular functions in the laboratory
• Perform routine cardiovascular tests, including transthoracic echocardiography, treadmill ECG testing, blood pressure and Holter monitoring
• Assist in performing transesophageal echocardiography
• Competent to perform echocardiogram test and prepare report
• To perform Stress echocardiogram investigations including, treadmill stress echo. Dobutamine stress echo. And transesophageal echocardiography test
• Assist with interventional imaging system, such as IVUS, FFE, IABP and OCT
• Assist interventionists in cardiovascular laboratory and record procedure in cardiac reporting system

Job Requirements:

• Degree in Biomedical Science (preferably with specialisation in cardiac technology) & minimum 2 years relevant experience
• Those with Diploma in Biomedical Science (preferably with specialisation in cardiac technology) and/or with relevant experience may be consider for a junior position

Job Summary

Purpose of job

Case management and psychosocial intervention for various clientel groups from youths, adults, caregivers, seniors with mental health challenges in the community in accordance to ethical and legal guidelines.

Key Responsibilities Areas

• Ability to provide case management, psychosocial intervention, care coordination and recovery support for clients with alleged or diagnosed mental health issues.
• Able to work independently to conceptualise, implement intervention plans and follow-up with clients.
• Support intake and referral services.
• Work together with community partners or stakeholders for case conferences pertaining to complex cases.
• Create programme, conduct and facilitate groupwork for clients and caregivers if needed.
• Provide talks to raise awareness of mental health issues and dementia.
• Update of sessions into the system for reports according to service requirement.
• For Senior Social Worker position, clinical supervision is expected.
• To undertake any duties as assigned by the Head, Community Mental Health and the Executive Director.

Requirements

Experience:

• Experience and/or knowledge in working with clients on Mental Health challenges and Person-Centred Care and recovery will be an advantage.
• Experience in case management, group work and community work will be an advantage.
• Good organisational skills, highly motivated and service mindset to serve the community.
• Ability to work independently and as a strong team player.
• Good administrative and computer skills with proficiency in MS Office

Qualifications:

Grad Diploma/ Degree in Social Work

Others:

Required some travelling and home visits to different locations.

Please send in your CV with expected salary to [email protected]

Only shortlisted candidate will be notified.