The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

What you will do

• Customer support responsibilities, ensuring timely and effective resolution of customer inquiries and issues
• Project management involvement, including planning, execution, and delivery
• Support marketing promotion activities to enhance product visibility and market presence
• Engage in clear and effective communication with customers to address their needs and concerns
• Aid in debugging and testing to ensure product quality and reliability

Required Skills

• Excellent proficiency in English and Mandarin, both written and verbal, to liaise with our affiliates from different regions.
• Preferred experience in display or scalar-related technologies
• Strong communication skills, with the ability to effectively convey technical concepts
• Desirable capability in system integration to facilitate seamless collaboration across different components and subsystems

Location: One North, Singapore

Job Purpose

• Support and contribute in driving best-in-class yield and defectivity performance

Job Description:

• New/mass production yield analysis and improvement
• Product yield abnormalities systematic analysis and solutioning
• Work with modules, Integration & QRA, etc to solve product technical issues
• Product yield target goal setting and forecast
• Participate in new process development and production ramp
• Product yield improvement and related customer request support
• Wafer return electrical and physical failure analysis

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 5 years of relevant work experience in modules/Process Integration/Product Engineering
• Possess strong analytical skills, usage experience in ACEXP / JMP /Minitab
• An excellent team player with good interpersonal, communication and written skills
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Roles

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. To be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.

Responsibilities

• Assist with on-site management to ensure project success
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes owner billings and project related accounting issues

Qualifications

• Bachelor’s degree in mechanical or industrial engineering or equivalent experience
• 1 - 3 years' of experience as a project coordinator, project engineer, or project manager
• Strong experience in AutoCad and Microsoft Office Suite
• Familiarity with rules, regulations, best practices and performance standards
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

Role Description

This is a full-time on-site role for a Design Engineer at Firetec (Singapore) Pte Ltd. The Design Engineer will be responsible for designing and developing new products, creating detailed engineering plans, collaborating with cross-functional teams, and ensuring that the engineering meets quality standards.

Qualifications

• Diploma in Business Administration or relevant field
• Proficiency in CAD software, such as AutoCAD
• Strong knowledge of engineering principles and design techniques
• Familiarity with rules, regulations, best practices and performance standards
• Excellent problem-solving skills,attention to details and meeting deadlines
• Effective communication and teamwork abilities
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Candidate must possess at least a Diploma in Computer Science / Information Technology or equivalent.

Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.

Minimum 4 years and above of relevant hands-on experience in system operation support and project management.

Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.

Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.

Possesses strong analytical skills to diagnose and address application problems.

Result and customer oriented with multi-tasking capabilities

Dependable Solutions Partner Pte Ltd

· We are a well-established growing company, ready for the next phase of expansion.

· We offer a work culture where everyone wins as a team, through trust, support and respect.

Responsibilities

• Responsible for the overall, coordination, implementation and execution of projects ensuring consistency with company commitments and goals

• Good organisation and time management skill, able to work independently with minimum supervision

• Perform project co-ordination works between client, suppliers and sub-contractor pre and post project implementation

• Monitor and report the progress of the projects to all stakeholders

• Able to work under tight deadlines

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

The Service Analyst provide application support to users. The candidate poses a structured and analytical approach to the identification, diagnose and rectification of user reported issues.

a) Provide applications troubleshooting and on-site support.

b) Log, escalate and follow through with issues.

c) Simulate user problems to resolve operating difficulties.

d) Coordinate activities to identify, diagnose and rectify problems

e) Provide 24/7 primary application maintenance support.

f) Provide reports for related KTLO activities

g) Ensure that all KTLO related activities are done on time

h) Liaise with vendor on issues and ensure that issues are resolve promptly according to SLA requirements.

i) Work closely with vendor and users to fulfil operation requirements and issue resolution

j) Involvement in the system integration testing phase / User Acceptance test prior to implementation.

i) Assist, Support and Ensure contract management related process and documents are complete on time.

Requirements / Qualifications:

a) Diploma/Bachelor’s degree in computer science or other highly technical, scientific discipline

b) 1-3 yrs of Technical / Application Support experience on multi technology platforms

c) ITIL v3/v4 certification and strong service oriented experience / background preferred.

d) Knowledge and understanding of IT industry environment and business needs

Responsibilities:

• Supervise the Service Delivery Managers and other resources within the security services team
• Prepare and deliver the service and maintenance proposal during bids
• Formalize service requirements, cost of ownership and integrated logistic support of the Solution
• Define the architecture/organization of the service and the associated service infrastructure
• Allocate service requirements to the various actors of the organization for support
• Validate the Service Deployment Readiness
• Validate the Obsolescence Management Plan
• Responsible for the resources to deliver the services
• Ensure that the teams meet all the Service Level Agreement (SLA)

Requirements:

• A bachelor's degree in IT/Computer/Engineering Discipline
• Preferably more than 10 years of work experience in maintenance of Critical System with SLA in the management capacity
• Experience in execution of ITSM processes in an organization
• Experience in operation transition planning from project phase into maintenance phase
• Experience in managing a group of more than 20 service support staffs and sub-contractors
• Experience in delivering ILS requirements in project phase
• Good understanding of Logistic Support Analysis such as Maintenance Engineering Analysis (MEA) and Level of Repair Analysis (LORA)
• Good understanding of System Reliability, Availability and Maintainability (RAM) programme
• Experience in the System Testing, Commissioning and Warranty support
• Strong interpersonal skills, ability to effectively communicate with peers and customers on all levels
• Ability to effectively prioritize and execute tasks in an occasionally high-pressure environment
• Organized and motivated individual with good written and oral communication skills
• Good technical knowledge of Windows Server, Linux, VMware, Databases, Storage, Networking, Cybersecurity, Communication Systems will be an advantage
• Any professional certifications such as PMP/IPMA, ITIL, CCNA, etc. will be also an advantage

Responsibilities:

• Perform administrative duties and provide customer service to our patients
• Responsible for registration and billing, payment/deposit collection, appointment scheduling as well as providing financial advice to patients
• Scheduling follow-up appointments for patients.
• Assist with planned admissions at ambulatory centres, supporting OT resource management and admitting/discharge processes
• Any other duties assigned from time to time

Requirements:

• GCE ‘N’/ ‘O’ / ‘A’ Level, NITEC, Higher NITEC or Diploma in any relevant discipline
• 1 to 2 years of working experience, preferably in healthcare industry
• Candidates with no prior experience are welcome to apply
• Good interpersonal & communication skills
• Proficient in Microsoft Office applications

Working Schedule (Staggered hours):

• Staggered working hours
• Work on weekends and Public Holidays on rotation basis.

The Service Operations Engineer provides technical support for application related issues and performs daily service health monitoring, server maintenance and resiliency improvements.
He/She is responsible for delivering new and improved capabilities in systems monitoring, recovery and stability aspects of the ERP systems.

•Support and assist in regular server maintainance, system accesses, systems monitoring, backups, patching and daily health checks

•Maintain service operations documentation and guides. Develop supporting documentation for all Service Operation activities

•Monitor Service level dashboards, perform daily health monitoring, system capacity review and allocation of adequate capacity

•Defect fixes and resiliency related improvements

•Assist in investigation of user reported issues

•L2 support

•Develop mitigating and/or preventive solutions

•Support transition phases from project to operations.

•Assist team in Change Approval Board and Pre-commissioning preparations.

•Liaise closely with interfacing systems users and support teams on routine support issues or enhancements.

•Provide application maintenance support (certain activities may occur after office hours).

•Liaise closely with business users and build good rapport.

•Support vulnerability assessment, capacity management and software lifecycle to ensure timely remediation of identified issues.

•Coordinate production deployment process and administrative account access.

Requirements / Qualifications:

• Bachelor’s degree in computer science or other highly technical, scientific discipline

• 3-5 yrs of Technical / Application Support experience on multi technology platforms

• ITIL v3/v4 certification and strong service oriented experience / background preferred

• Strong Knowledge and understanding of IT industry environment and business needs

• Proven experience supporting Web / Mobile / Client based applications

• Strong knowledge in SAP SuccessFactors, SAP S/4 Hana application with strong analytical and problem-solving skills

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities

• Help create immersive gaming experiences with a focus on innovation and creativity.
• Commit to developing phenomenal products that stand out and make a significant impact in the gaming industry.
• Work closely with cross-functional teams to rapidly prototype, design, and implement innovative ideas and projects.
• Provide development assistance at the system level to other departments as needed, ensuring seamless integration and functionality.
• Generate comprehensive documentation, including technical and functional specifications, to support project development and implementation.
• Participate actively in agile planning sessions, contributing to scope estimation and project planning for team initiatives.

Pre-Requisites

• BS/MS in Computer Science/Engineering or related field.
• 5+ years of software engineering experience.
• Extensive programming experience in C/C++.
• Experienced in developing system applications for Windows/MacOS/Linux/Android.
• Experienced in Driver development on Windows/MacOS/Linus/Android.
• Experienced in complex computation in 3D space.
• Experienced in game engines (Unreal and Unity).
• Strong analysis and problem-solving skills.
• Ability to work independently and collaboratively in a small team.
• Knowledge of game development a plus.
• Is a gamer.

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for a robotic surgical system. Specifically, you will provide mechanical and mechanism engineering expertise in the R&D of surgical instruments. You will be working on designing mechanisms, structures and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop the surgical instrument in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical engineering.

· 5 - 8 years’ experience in the design & development of surgical instrument.

· Experience at least one cycle of product development.

· Able to communicate and write documents in Chinese (preferred).

· Familiar with regulatory and compliance requirements for the development of medical product.

· Strong technical capability in mechanism design and fabrication of precision and micro instruments.

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Good knowledge of various materials (metal and plastic), coating and manufacturing processes for precision parts.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in surgical robotic system and instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to precision mechanical instruments.

· Resolve issues and improve product reliability.

· Ensure the design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and fabrication activities locally or with overseas partners.

· As a mentor to junior engineers and enhance their knowledge and skills.

Ensure proper documentation (Design History File) for mechanical design.