Job Description & Requirements

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic) or equivalent.
• Having an experience and knowledge in Testing & Commissioning of power plant, substation.
• Knowledge in testing of experience in MV, LV Switchgears and Transformers.
• Operating and interlock checking
• Knowledge of Transformer Differential Protection & REF Protection and its stability test, Bus bar protection and its stability test, over current & Earth fault protection.
• Prepare and study control - protection drawings of all electrical systems.
• Cable schedule preparation based on scheme available at site.
• Testing and commissioning of all Electrical equipment.
• Testing of protective Relays used for various purposes, Experienced with relays such as over current and Earth fault relay.
• Testing of CT, VT, Circuit breaker, Isolator, Earth switch and Switch gear related Electrical equipment and Power transformer.
• Operation and Maintenance of Power Plant and Substation.
• Troubleshooting of all Electrical circuits, control and Protection circuits.
• Good team player and communication skills in project management.
• Required language: English
• Required Skill: electrical switch board troubleshooting and commissioning, knowledge in protection relays (ABB, Micom or sepam will plus), knowledge in HV and LV switchgears, troubleshoot skills.

Education:

Degree holder with experience 3 years

Diploma holder with experience 8 years

Job Description:

· Preparation of project documentations e.g. tender, quotation, progress claims, drawings, check list, etc

· Responsible of site coordination and supervising to ensure projects are completed according to schedule.

· Liaise closely with clients, consultants, and suppliers on all project related matters.

· Attend site walk, meeting, site inspection when required.

· To carry out technical support functions in electrical engineering work on site.

· Any other duties as assigned by superior.

Job Requirements:

· At least Diploma in Electrical Engineering or its equivalent.

· Minimum 2 years of relevant working experience in M&E or construction industry.

· Possess relevant safety certificates is an advantage.

· Knowledge with equipment installation, testing & commissioning, troubleshooting as per M&E drawings or engineering specifications.

· Ability to work independently and under pressure to meet tight project schedules.

· Willing to travel & based at the project site.

· Have knowledge in AutoCAD & Microsoft Office.

Responsibilities:

· Manage full sales cycle (attend site visits, sales meetings, etc)

· Provide sales and technical/engineering support to customers (training will be provided)

· Site visits / inspections for projects

Requirements:

· Good interpersonal skills and ability to communicate well

· Simple understanding of Mechanical Engineering (training will be provided)

· Good working attitude

· Preferably with own transportation (additional allowance will be given)

Responsible for coordinating mechanical and electrical works, focusing on Air-Conditioning and Mechanical Ventilation systems, for building construction and improvement projects, including:

• Review M&E design drawings for discrepancies with structural, architectural, and client provisions.
• Oversee project implementation, including on-site quality checks and final measurements.
• Evaluate and resolve technical discrepancies.
• Liaise with clients, architects, consultants, sub-contractors, suppliers and relevant authorities.
• Coordinate subcontractors to ensure timely completion according to quality standards and schedule.
• Monitor daily work activity schedules.
• Report defects in materials and workmanship, submitting Non-Compliance Reports for corrective action.
• Inspect subcontractor work for quality and safety compliance.
• Any other ad-hoc assignments assigned by the Management.

Requirements:

• 5 years of experience managing ACMV works.
• Possess a Singapore Class 3 Driver’s License.
• Proficient in Microsoft Office and AutoCAD.
• Manage Work at Height Certificate - Assessor/Manager.
• OFAC Certification an added advantage.
• This position is open to Singaporeans and Singapore PR only.

• Establish and improve process condition and technology.
• Upgrade process capability and reduce production cost.
• Establish and modify process management projects.
• Set up process parameters for a variety of semiconductor equipment.
• Evaluation, promotion and planning of new equipment / materials.
• Abnormal analysis and improvement.
• Maximizes yield by working on tools, the process, or wafer fabrication recipes.
• Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations.
• Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications.
• Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Job Responsibilities:

1. Lead a team of professional & technical trained staff in planning, daily operations, liaise with clients, consultants, sub-contractors & relevant authorities.
2. Ensure the construction project complies with all building codes and any other legal or regulatory requirements.
3. Responsible for overall project planning, scheduling, monitoring, and updating to meet targets.
4. Manage the project sites and operations by overseeing the day to day running of all matters related to the construction of the project.
5. Assist in the planning and sequencing of construction operations.
6. Reporting to Project Director / Management.
7. Any ad-hoc task assigned by the Company.

Education Required:

1. Possess Degree in Civil Engineering recognized by Singapore PE Board OR
2. Degree in Civil Engineering not recognized by Singapore PE Board with valid Structural Steel Engineers (StEr) (SSSS) certificate and membership.
3. Relevant certificate – BCSS / CSCPM – etc

Experience Required:

1. Minimum of 3 years' experience in Structural Steel & Metal work
2. Knowledge of AutoCAD, Microsoft Project, Microsoft Office is a must. Others acquired skill will be an added advantage.

Responsibilities:

The Senior Application Engineer is responsible for delivering projects and liaising with clients to deliver customized solutions.

Duties and Responsibilities

• Project planning, coordination, and execution.
• Design and integration of automation systems according to project requirements.
• Graphical design of the electrical network.
• Plan installation schedule with client and installer
• Testing and commissioning of systems.
• Preparation of project documents and drawings.
• Manage a group of Application Engineers.

Candidates should be able to work independently and as team players on simultaneous projects with compressed timelines. Candidates should also expect limited travel to interface with customers, and attend or exhibit at conferences and trade shows.

Requirements:

• The candidate is preferable with at least Degree in the Engineering field (Electrical or Power & Automation, experienced candidates are welcome.)
• Experience/knowledge in SCADA, PLC & HMI in Power System Control or Environmental Control Systems.
• Knowledge of data communication and automation systems for electrical networks.
• Knowledge and experience in IT networking as well as server/VMs setup is an added advantage.
• Knowledge and experience in Power Quality Meter and Power Quality Monitoring System is a plus.
• Required skill(s): Microsoft Office, Savvy in various computer skills such as computer networking, setting up new PC/VMs, knowledge of electrical systems.
• Mature and able to handle tasks independently, result-oriented, and self-driven team player with good communication skills.
• Good personality, responsible, hardworking person.
• Fast learner and good soft skills.
• Ability to work as a team, lead and supervise the contractors.
• Experience in people and team management in administrative and functional aspect.
• Process excellent team spirit and good leadership.
• Minimum 5 years of experience.
• 1 Full-Time position(s) available.

Our company values a good working attitude, passion, and dynamic towards education qualification.

Responsibilities

• Oversee the maintenance of production machineries, ACMV systems for building and infrastructure, office facilities, fire protection systems, and related tasks within a GMP and GHP environment.
• Plan schedules, manage daily operations, troubleshoot, repair, and provide reports.
• Coordinate with production and other maintenance teams to ensure safe execution of maintenance and modification projects while preserving facility integrity.
• Conduct mechanical and electrical assessments and implement modifications to plant facilities based on technical requirements and business needs.
• Investigate equipment issues, analyze findings, and recommend preventative measures to minimize recurrence.
• Provide training to production operators to enhance skills and reduce downtime and faults.
• Respond to plant emergencies and address machine faults promptly.
• Conduct daily inspections for machine safety and fire safety.
• Collaborate with departments to address maintenance issues promptly and prioritize planned and unplanned maintenance activities.
• Undertake additional duties as assigned by superiors.
• Maintain comprehensive records of work, ad-hoc projects, and report writing.

Requirements

• Degree in Mechanical / Mechatronic Engineering
• At least 3 years of experience in Autonomous Maintenance in F&B Manufacturing Sector
• Hands-on experience required
• Able to work independently and as a team
• Responsible, proactive and have the initially to response to fault call upon activated
• Good oral/written communication and interpersonal skills

FIELD SERVICE ENGINEER

ROLES AND RESPONSIBILITIES

· In-house automation Assembly as per drawing

· Able to read drawings and schematic diagram

· Perform Assembly work on electrical & mechanical parts on machine

· Ensure safety and housekeeping standard are maintained

· Maintain production general spare parts inventory accuracy.

· Ensure all work done meets quality

· Provide constructive feedback to design team that are related to design error during assembly

· To go to customer site to conduct troubleshooting & resolution of machine problems

· Able to standby or work on weekends upon request by superior

· Flexible and nimble to shift and do multitasking

REQUIREMENTS

· Candidate must possess at least Professional Certificate, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Mechanical), Engineering (Mechatronic /Electromechanical) or equivalent

· At least 2 Year(s) of working experience in the related field is preferred for this position. Non experienced candidates whom are keen are welcome to apply as well.

· Preferably Non-Executive specialized in Engineering - Mechanical / Automotive or equivalent

• Establish and improve process condition and technology.
• Upgrade process capability and reduce production cost.
• Establish and modify process management projects.
• Set up process parameters for a variety of semiconductor equipment.
• Evaluation, promotion and planning of new equipment / materials.
• Abnormal analysis and improvement.
• Maximizes yield by working on tools, the process, or wafer fabrication recipes.
• Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations.
• Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas.
• Evaluates products to ensure they meet the required design and performance specifications.
• Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Technical Sales for Precision Engineering

1 to 2 years sales experience in Engineering Products

Engineering Products such as Bearings, Linear Guides, Actuators, Linear Motors, Gantries etc

Industries: Semiconductor, Biotech, Renewable energy

Use of Microsoft Office and ERP

Outgoing and willing to learn and grow with company

Willing to travel if required

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

- BS degree in Electrical or Computer Engineering

Job Descriptions:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.
• Meticulous and self-motivated; cooperate and comply.

Job Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.

Job Descriptions

1. Collect and deliver linen between factory and customer

2. Loading and unloading trolley

Job Requirement

1. Obtain Class 4 driving license

2. Physically fit to work as driver

3. With Class 4 driving experience will be advantage

4. 6 days work week

Interested, please contact 65788067 /8075 /8079 for enquiry

or walk in interview at 39A Senoko Way Singapore 758055.

Key Job Accountabilities (Actual daily deliverables):

• Manage maintenance and operation of CCTV system, Access Control System (ACS), break glass sensor and turnstile
• Manage and respond for emergency response plan for various alarm and drills
• Manage access control badge
• Manage car park system
• Manage Security operation, documents and inventories
• Manage PA system and exit light
• Manage security system and EHS related trainings
• Manage committees EHSS and 6S
• Maintain standards (ISO, TAPA, RBA & etc) requirements
• Manage chemical program and SDS
• Manage work permit system and carry out any other duties as assigned
• Familiar to EHSS management system

Required Experience and Qualifications:

• Minimum Diploma
• Candidates with no EHSS experience can be considered.

Key Job Accountabilities:

· Responsible for maintenance and repair on any of the following equipment such as DISCO Wafer SAW (DFD 6360 and DFD6361) and DISCO laser groove.

· Provide technical support to manufacturing that includes machine conversion, device setup and line sustaining.

· Ensures 100% support to engineering group on device & recipe creation, equipment buy-off, evaluations, qualifications and support new product introduction NPI.

· Communicates with Manufacturing, Process, QA, Central Engineering (NPI) to solve issues involving other group.

Required Experience and Qualifications:

· Possess wide application of most major concepts of specialization and ability to apply these concepts to a wide range of complex assignments.

· Requires through knowledge of practical applications of concepts, procedures and guidelines to solve extremely complex problems.

· Diploma in Electrical/ Electronics/ Mechanical / Mechatronics, Chemical, Material, Science or its equivalent Hands on experience in handling Wafer saw and Laser groove machine.

Lead, manage and motivate a team of Laundry Operators to achieve daily production targets in output, quality, delivery and cycle time.

Overall resource planning and allocation for Operation departments.

Plan, organize and control for daily Operations and execute work effectively.

Responsible for continuous improvement programmes to improve on quality, productivity and delivery.

Plan and organize manpower requirements for the department to achieve maximum efficiency and performance.

Estimating, Negotiating and agreeing Budgets and Timescales with Stakeholders.

Recommend and verify the implementation of product non-conformity solution.

Ensuring Workplace Safety and Health (WSH) regulations are met.

Handle customer feedbacks and enquiries.

Responsible for corrective and preventive action.

Ensure and implement good 5S housekeeping and compliance safety measures in the plant as required.

Monitor and appraise the individual worker’s performance.

Perform any other duties as required and directed by the Operation Manager.

- Bedok

- System Integrator

- 5 Days

- Basic + Allowances + Incentives

Responsibilities:

• Perform in-depth and high-level technical presentations for customers and prospects.
• To provide technical/project consultancy in support of sales at client meetings and on conference calls.
• To discuss, capture and define customer requirements.
• To work with the Sales teams to exploit the commercial opportunities for the IT Networking, Security, Servers & Storage range of products.
• Responsible for Pre-sales project management from requirement capturing, design to implementation.
• Working closely with members of the Delivery management team to ensure Infrastructure being delivered on time, to specification and within budget.
• To write technical Requirement Specifications which meet customer requirements and translate these accurately to the Delivery and Deployment team
• Where required – to review technology/service offerings/products with internal and external parties as part of any evaluation or development process.
• Develop and maintain a product proficiency and competency level by attending mandatory training classes and successfully completing required levels of competency.
• When required to construct and deliver training that ensures that the Sales teams understand and use technologies to the required level necessary.
• Report monthly to the Pre-Sales Manager on Pre-sales progress and development including progress and management against targets.

Requirements:

• At least Degree or Diploma in Computer Science/Engineering or similar discipline with minimum 3-4 years in system integration work or relevant pre-sales role.
• Certifications in various areas such as MCSE, CCNA, CCDPetc will be an advantage.
• Experience in multi operating system platform will also be an advantage.
• Should be able to present solutions at senior management level on the value proposition.

Job description

• Responsible for process optimization & characterization by performing experiments and test planning
• Coordinate and drive cross functional team to enhance product performance and product robustness
• Develop enabling new technologies/materials for processes and automation
• Evaluate processes to meet customer requirement and develop standard equipment operating flow
• Setup optical components/systems and test for proof of concepts
• Calibrate and/or fine-tune optical devices

Requirements

• Min Bachelors/Masters degree in Mechanical / Material Science/ Physics. Other relevant majors can also be considered.
• Experience in automatic machine setup, optimization and automation troubleshooting, yield improvement etc in any high volume precision manufacturing/assembly industry or Semicon industry.
• Possess good knowledge or experience in CMOS camera assembly and/or 3D sensor calibration will be added advantage
• Experience in statistical data analysis, data modeling and DOE
• Good communication & presentation skills

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued. • Prepare method of statement and work procedure. • Conduct weekly or monthly meeting with sub-contractors to update progress of work. • Ensure quality of work is achieved and all government and safety regulation are complied. • Oversee drawing management and control of technical documentation. • Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage. • Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order. • Organize labor, equipment and material for day to day site activities • Carry out material receiving inspection and maintaining material record. • All delivery order are to be return to office for record. • Prepare daily and monthly progress report, perform and maintain inspection record. • Any other duties assigned

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued. • Prepare method of statement and work procedure. • Conduct weekly or monthly meeting with sub-contractors to update progress of work. • Ensure quality of work is achieved and all government and safety regulation are complied. • Oversee drawing management and control of technical documentation. • Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage. • Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order. • Organize labor, equipment and material for day to day site activities • Carry out material receiving inspection and maintaining material record. • All delivery order are to be return to office for record. • Prepare daily and monthly progress report, perform and maintain inspection record. • Any other duties assigned

Responsibilities:

• Project execution and reporting including project management
• On site and off site coordination, supervision and meetings
• To prepare technical and engineering drawings using AutoCAD
• To assist in project sales and tendering stages
• Document compilation and submission
• To assist in other business activities as and when assigned

Requirements:

• Minimum a Professional Certificate / NITEC or higher in Engineering Electrical or M & E drafting
• At least 2 years’ experience in AutoCAD skill in Electrical drawing for commercial, industrial and residential
• Must be attentive to details, independent and hardworking
• Able to understand architectural and structural drawings
• Good working attitude

** Singaporeans only need to apply

Additional Information:

• Company Vehicle Provided

Interested applicants are invited to submit your resume to us by clicking on APPLY NOW button below.

Kindly INCLUDE the following:

• Available Date
• Expected Salary

Thank you for the application.

1-2 years experience in customer service

Understand how to process purchase orders, sales orders, sales quotations

Logistic knowledge (Shipping, air freight)

Microsoft Office Skills

Good to have knowledge in Business Central (Microsoft) ERP

Knowledge in semiconductor industry

Able to speak with both customer and vendors

Open to learn and cheerful disposition

• Basic up to $5,300
• 5 days work: 8.30 am – 5.45 pm
• AWS + Bonus + Excellent Benefits + Career Progression!
• Location: Senako North

Job Responsibilities

• Carry out the maintenance of E&I installations (PLC, DCS, MCC Panel).
• Develop preventive maintenance plan and critical spare part list for E&I installations.
• Troubleshoot E&I-related faults and breakdowns.
• Lead and prepare knowledge transfer training to reporting E&I technicians.
• Failure analysis/root cause analysis for E&I-related faults and breakdowns.
• Automation system programming (sequencing & graphical) according to operational request.
• Develop automation interlock master list and continual process safety improvement.
• Cost reduction effort for E&I-related work orders.
• Procurement and stockkeeping of E&I equipment.
• Prepare process safety information (Single Line Diagram, Ladder Diagram, etc.).

Job Requirements

• Minimum Diploma / Degree in Electrical Engineering or related discipline.
• Working experience in a process manufacturing industry.
• Well-versed in DCS, PLC, HMI and SCADA systems.
• Siemens - S7 300/400/1200/1500 series PLC system with SIMATIC manager/TIA portal.
• Engineering Drawing (AutoCAD 2D, 3D, E-Plan or any).
• Experience and knowledge in the Electrical field and control systems.
• Ability to learn concepts and technical details of complex systems.
• Pro-active and self-motivated team player with strong engineering judgment skills.

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates will be notified**

EA Personnel No: R23118342 (Jess)
EA License No: 15C7752

Responsibilities:

• Design and coordinate assigned Civil & Geotechnical Engineering projects such as residential, commercial, industry, institution and infrastructure.
• Perform civil & geotechnical analysis and design in ERSS, GBW, building or on any structures as required.
• Liaise with authorities, clients, architects, consultants and builders.
• Coordinate to ensure civil and geotechnical requirements meet project tender, authorities submission and construction schedule.