Job Description & Requirements

Preferred Skills Cisco Catalyst Switch, Alcatel-Lucent FortiNet Series, Palo Alto Networks Firewall, Fortinet

- Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.

- Hands-on experience with Alcatel Lucent Wireless Controllers.

- Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.

- Proficient in ClearPass Policy Manager for network access control and policy enforcement.

- Knowledge of network protocols, security architectures, and best practices.

- Strong analytical and problem-solving skills with attention to detail.

- Excellent communication and teamwork abilities.

Job Description & Requirements

Provide operation and administration support on system infrastructure according to the agreed service levels.

• System administration;

• Backup and recovery administration;

• Server security administration;

• Performance and fault management;

• Report requirements; and

• Server management support.

Type of system infrastructure includes:

• Physical Servers;

• Virtual Machines (VMware, Hyper-V);

• Windows Active Directory (AD, DNS, DHCP, Group Policy) <- This is a must.

• Storage (SAN);

• Backup (Veritas, Backup-exec, backup appliance).

Type of Operating System includes:

• Windows Server 2016/2019/2022

• Experience with RedHat Linux is a bonus

Provide operation and administration support on system infrastructure according to the agreed service levels.

• System administration;

• Backup and recovery administration;

• Server security administration;

• Performance and fault management;

• Report requirements; and

• Server management support.

Type of system infrastructure includes:

• Physical Servers;

• Virtual Machines (VMware, Hyper-V);

• Windows Active Directory (AD, DNS, DHCP, Group Policy) <- This is a must.

• Storage (SAN);

• Backup (Veritas, Backup-exec, backup appliance).

Type of Operating System includes:

• Windows Server 2016/2019/2022

• Experience with RedHat Linux is a bonus

Preferred Skills Cisco Catalyst Switch, Alcatel-Lucent FortiNet Series, Palo Alto Networks Firewall, Fortinet

- Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.

- Hands-on experience with Alcatel Lucent Wireless Controllers.

- Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.

- Proficient in ClearPass Policy Manager for network access control and policy enforcement.

- Knowledge of network protocols, security architectures, and best practices.

- Strong analytical and problem-solving skills with attention to detail.

- Excellent communication and teamwork abilities.

Salary: Up to $3000

Duration: 6 months contract

Location: Outram (5 mins walk from Outram MRT)

Working Hours:

Monday to Friday: 8.30am to 6pm

Responsibilities:

• Addresses the needs of all homebuyers and ensures a seamless homebuyers experience.
• Attend to homebuyers' enquiries, requests, as well as concerns and feedback with professionalism to promote a positive first impression.
• Always maintain a professional image and be well-versed about the property.
• Provide administrative duties at Reception.
• Assist owners to make appointment for key collection.
• Handle phone calls and walk-in queries including taking down messages during the Relationship Service Manager’s absence.

Requirements:

• Service-oriented individual with excellent communication skills
• Able to work independently
• Able to multitask

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394
R1435126 (Aw Yu Chen)

Position Title: Service Crew

• Location : Various location
• Working Days : 44hrs per week including weekend and PH (5days)
• Salary : $2,200 - $2,400 + OT (Depends on Experience)

Roles & Responsibilities

• To perform kitchen and bar stations in compliance with the Company’s Standard Operating Procedures (SOP)
• To perform counter station in compliance with the Company’s Standard Operating Procedure (SOP), to perform cashiering function and suggestive selling on outlet specialties, promotion items to customers.
• Practice proper usage and cleanliness of all outlet tools & equipment and in compliance with statutory safety requirements
• Practice good housekeeping, and to ensure cleanliness & tidiness of premises including toilet (if any), including clearing the garbage bags from the rubbish bins
• Comply with NEA requirements over personal & food hygiene and safety
• Practice proper usage and storage of all food and beverage items so that quality is well-maintained
• Assist in inventory management
• Any other ad-hoc task as and when assigned by the superior

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Manage Standardized Work Chart (SWC), subcontractors, and site staff to ensure on-time project completion and update clients, consultants, subcontractors, and stakeholders on project progress.
• Prepare method statements, identify drawing discrepancies, submit material and sample submissions, and provide technical advice to resolve M&E-related issues
• Inspect work to ensure compliance with contract specifications, codes of practice, and safety regulations, while coordinating with SWC on structural and civil work matter
• Conduct inspections with RTO/RE based on specifications and approved drawings.

Requirements:

• Diploma/Degree in Electrical/Mechanical Engineering or equivalent
• At least 5 years of experience including involvement in two MRT/LTA underground project
• Proficient in leading CSD/SEM coordination, design interface, and construction coordination for transit projects, including chairing and leading coordination meetings
• Strong experience in BIM software and AutoCAD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Responsibilities

• Liaise with the licensees operating at the range
• Provide feedback on the conditions and improvements at the Driving Range for the enjoyment of golfers, and assistance during golf practicing
• Maintain a control record of credits transfer for Player/Staff/damage cards
• Coordinate in conjunction with supervisor all promotional activities/event at the range
• Recommend sales promotion and other activities beneficial to members
• Monitor and ensure facilities are clean and in good condition
• Report on Range Card System if it is not functioning.
• Ensure all transactions and cash are accounted and submitted to Finance Department
• Ensure the collecting and washing of range balls function efficiently
• To operate the SkyTrak Launch Monitor and Tablet and simple troubleshooting of the device
• Ensure range mats are rotated and clean
• Ensure driving range baskets are collected and placed neatly for golfers use

Requirements

• GCE N / O Levels preferred with at least 1 year of experience in similar capacity
• Fair knowledge and experience of golf is preferred
• Familiarity with operation of PC Card Sales system is an added advantage
• Possess good interpersonal and communication skills
• Must be prepared to perform shift duties and work on weekends and public holidays
• 5-day work week (Mon to Sun), rotating shifts: 06:45am to 04:00pm / 10:45am to 08:00pm / 01:45pm to 11:00pm
• Pick up from Bedok and Tanah Merah MRT stations, monthly laundry allowance provided
• Job Reference: QYX9X6X9

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Sales Engineer

Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Accurately document all equipment deliveries and removals.
• Conduct routine audits to ensure inventory integrity and compliance.
• Use equipment such as pallet jacks to facilitate safe item movement.
• Work within a ticketing system to manage tasks and assignments effectively.
• Execute the secure destruction of data-storing devices, including hard drives and SSDs.
• Manage shipping, receiving, and inventory processes.
• Prioritize and resolve tickets, escalate issues, and handle blockers to sustain inventory operations in line with service agreements.
• Be prepared to work outside standard business hours, including weekends or holidays, as needed.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related discipline.
• At least one year of experience in IT Support or Systems Monitoring (fresh graduates with a proactive attitude are encouraged to apply).
• Minimum six months of experience in Inventory Control, Logistics, or Warehouse Management.
• Capable of performing physical tasks, including lifting and working at heights, with or without equipment assistance.
• Excellent communication skills in English, both spoken and written.
• Motivation to grow and learn new technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

About TikTok

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

Team's introduction:

Support revenue related frontend feature. Handle things literally about money in LIVE ecosystem, with a primary focus on supporting user-side products across diverse web/mobile/desktop platforms, and coordinating full-stack systems.

Responsibilities:

- Responsible for the construction of TikTok LIVE ecosystem, with a primary focus on 3D model rendering, animation implementation and interactive effect implementation

- Stay at the forefront of industry trends in rendering technologies, proposing and implementing innovative solutions to enhance our products, optimizing rendering performance on mobile devices

- Collaborate with cross-functional teams, including business developers, as well as UX/UI designers, to transfer technical exploration into real-world features

- Conduct thorough troubleshooting and debugging of issues, collaborating with the QA team to ensure the highest quality and robustness of code

- Contribute to decision-making processes and development of rendering infra tools or workflows or platforms aimed at improving overall efficiency

Qualifications

- BS/MS degree in Computer Science equivalent majors with experience in native iOS development

- Proficiency in Objective-C or Swift with the ability to understand and debug large scale codebase

- Solid foundation and high proficiency in 2D/3D graphics rendering and animations

- Strong collaboration and problem-solving skills, clear documentation - Live-streaming related knowledge is a plus but not mandatory

Preferred Qualification

- Strong on WebGL, GLSL, Three.js etc - Experience with Cross-Platform frameworks, such as React Native, Flutter

- Experience with advanced techniques in real-time rendering, character animation, physics simulation and geometry modeling - Experience with modern graphic pipelines

- Experience with low-level performance profiling and optimization on mobile devices

- Experience with DCC software such as Blender, C4D and game engines such as Unity, Unreal

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

#LI-JG1

Duration: 3 months contract to permanent

Location: Pioneer Road

Working hours: Mon - Fri (8am to 5pm) & Alternate Sat (8am - 12pm)

Responsibilities

• Perform order processing operations in compliance to rating principles as well as operator variations Perform documentation for order processing activities
• Perform stock transfer / system transaction in WMS
• Monitor cargo handling schedules to ensure timelines are complied with
• Perform system receipt of cargo
• Validate documentation and escalate non-conformities
• Identify operational shortfall and escalate
• Manage appropriate mitigating actions / plans to manage lapses in delivery of logistics services Prepare reports for customers and operations
• Perform billing process

Requirements

• Min. 1 year of customer service is preferred (Preferably in the logistics / warehouse industry)
• Prior experience in WMS/SAP will be advantegeous
• Execellent communication skills to liaise with different stakeholders

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • Reg No: R23117066 (CHEW KIA ZHENG)

Customer Service cum Operation Assistant

Working Days & hours: 5 days, Mon – Fri, 10am – 7pm

Location: Pasir Panjang

Salary: $2500 - $2800

Job scope:

• Responsible for order processing, quotations, invoicing, and delivery arrangements
• Assisting customers with sales inquiries via phone and email
• Responsible for following up on enquires and closing the order
• Working closely with sales personnel and providing them with updates when necessary.
• Coordinate and monitor deliveries and inventories for customers
• Administrative tasks on an ad-hoc basis

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Sales Engineer

Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Contribute to Life Science projects for Antaes Asia clients
• Contribute to the promotion of Antaes services on top of assistance provided to clients
• Review and familiarization on Process equipment's (PID's, lay outs and block diagrams).
• Execute and review SAT/FAT/IQ/OQ/PQ protocols/reports
• Review of documentation (SOP's, WRA, Risk Assessments)
• Review and generation of maintenance plans
• Following the project, the candidate will remain accountable for the designated system and would be accountable for:

Ø Safety: Ensure all maintenance activities are carried out safely. Maintain awareness in SEHS within Technical Services and strive for improvements.

Ø Quality: Ensure that all Engineering and maintenance activities are carried out in compliance with Engineering Standards and Procedures. Lead key Quality improvement projects. Assist and lead investigations and CAPA

Ø Reliability: Assure reliability of plant equipment and systems by managing team to implement conditioning monitoring and methods, conduct equipment measurement and improvement on repeating failure; evaluate/analyze data/results, provide recommendation and follow up monitoring

Ø Continuous improvement: Drive continuous improvement by providing recommendation and initiative to promote sustainability.

The systems listed below are currently in use on site. Candidates who can bring knowledge and experience across a selection of the following systems should apply:

Clean utility system:

• Purified Water Generation
• Purified Water Storage and Distribution
• Water-for-Injection Generation
• Water-for-Injection Storage and Distribution
• Pure Steam Generation and Distribution
• Technical Gases and chemical distribution
• HVAC and Cleanroom systems

Black utility system:

• Cooling Tower
• Steam Boiler
• Glycol Chillers
• Air Compressors
• Air Dryer
• Liquid Nitrogen

Requirements :

• Min 5 years of engineering experience with Degree in Engineering or min 6 years of engineering experience with Diploma in Engineering
• Min 5 years of technical experience in Bio/Pharma industry with Degree or min 3 years of technical experience in Bio/Pharma industry with Diploma
• Experience in GMP and safety practices & Knowledge transfer
• Highly knowledgeable and competent in their field of work.
• Strong technical knowledge and well verse in all technical aspects.
• Substantial fault-finding and trouble-shooting experience.
• Good analytical skill in investigation.
• Lead complex issues investigation and detailed troubleshooting.
• Experience in commissioning and sytem, drawing design review
• Experience in documentation in KNEAT, SAP, VEEVA
• Experience in VAF system, (VAF in Mechanical Engineering commonly refers to Vane Airflow Sensor, a device used to measure the flow of air in various applications, particularly in HVAC)
• Experience in EPA (Efficiency Particulate Air) , HEPA (high efficiency particulate air filter) & HVAC
• Experience in Maintenance and reliability reviews

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue
• Managing and Operating Red Hat Linux, Windows VM Infrastructure
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management
• Provide system administration support and guidance for development team’s app configuration tasks
• Veritas Clustering Setup on RHEL VM would be added advantage
• Chef Automation would be added advantage
• AWS EC2 maintenance
• Managing and Operating VMware vSphere IT infrastructure

Job Description & Requirements

• Lead & Support in the development of cloud infrastructure solutions.
• Management of Cloud infrastructure set up & implementation projects.
• Specialize in the best practice design, operations, and support of private/public/hybrid cloud infrastructure including Network, Storage, Compute and Security.
• Provide detailed designs on the IT projects assigned ensuring right architecture and functionality.
• Support new technology implementation.
• Handle project implementation from start to end.
• Aid with technical issues.
• Involve in Proof of Concepts.

We are looking for a Software Engineer to join the regional trading team on a 12-month contract, with the possibility of extension. There is also potential for the candidate to transition to a permanent role depending on performance and business requirements.

About the team:

This team develops advanced solutions for pricing, facilitation, portfolio management, market making, and quantitative analytics to support multiple Equity trading desks and asset classes. The ideal candidate will have hands-on experience in automated Equities trading using C++, as well as a strong passion for modern software architecture and development practices.

Key Responsibilities:

• Enhance and maintain components in a comprehensive system for systematic risk trading, utilizing modern C++ and Python. This includes integrating with q/kdb+ for analytics and building user interfaces for command and control.
• Analyze business requirements from the Equity Line of Business (LOB), design architecture, and develop core components, including low-latency C++ applications for activities like market making.
• Collaborate with the Site Reliability Engineering team to ensure top-tier reliability and scalability.
• Develop extensive experience in C++ programming on Linux platforms.
• Possess a deep understanding of building quantitative electronic trading applications, with preference for those experienced in automated on-exchange market making.
• Work within an Agile development framework and follow best practices.
• Communicate effectively with both technical and non-technical stakeholders.

Desirable Skills:

• Knowledge of Equities, Futures, Options, and FX asset classes, along with algorithmic trading experience in these areas.
• Practical experience with Python development.
• Familiarity with regulatory requirements for trading in APAC markets.
• Experience in architecting applications for Cloud and/or containerized environments.

Argyll Scott Consulting Pte Ltd

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At ByteDance, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

About the team

ByteDance and affiliate are developing the next-generation high-performance analytical database, with a mission to enable efficient and real-time data-driven decision-making on PB-level data sets. The initial product was forked from Clickhouse, after which large re-architecture had been taken place. The product now not only improves the efficiency of Clickhouse but also fits into the elastic cloud-native infrastructure with better scalability and resource utilization. With years of polishment in the internal EB-level scenarios, we are now ready to serve our business partners via various cloud vendors.

What you will be doing:

- Responsible for quality assurance of data and cloud products, and R&D efficiency improvement.

- Participate in product requirements and architecture design reviews, assess the rationality of the overall technical architecture and related testability.

- Ability to identify system risks in an all-around way, and ensure the stability of the systems through functional testing, performance testing, online monitoring, and other testing approaches.

- Build a data quality assurance system to ensure delivery quality and improve delivery efficiency throughout the entire process.

- In-depth understanding of the business, communicate and collaborate with various roles across teams, to create value for the business in an all-round way, without setting boundaries for work.

- Design and perform tests and check cases to determine if infrastructure components, systems and applications meet confidentiality, integrity, authentication, availability, authorisation, and nonrepudiation standards.

- Translate requirements into test plan, write and execute test scripts or codes in line with standards and procedures to determine vulnerability to attacks.

- Certify infrastructure components, systems and applications that meet security standards.

Qualifications

Minimum Qualifications:

- Bachelor's Degree or above, Computer Engineering, Mathematics, Statistics, Machine Learning, and other related majors

- At least 3 years of data testing experience

- At least 2 years of experience in managing a team

- 2 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- Solid understanding of distributed systems

- 2 years experience with UI and API automation testing and framework.

- 2 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 2 years experience in testing high-traffic distributed systems, and cloud-related products.

- Sensitive to data, with good logical thinking ability, analytical ability, troubleshooting skills, and business understanding ability.

Preferred Qualifications:

- 5 years of data testing experience

- 5 years of experience in managing a team

- 5 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- 5 years experience and solid understanding of distributed systems

- 5 years experience with UI and API automation testing and framework.

- 5 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 5 years experience in testing high-traffic distributed systems, and cloud-related products.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.

The AAA & Actuate developer will be responsible for the design of solutions for the upcoming changes to the existing as well as new assets/applications within the Services division.

This role is technology-oriented, which includes defining development methodologies, hands-on development for new projects/evolutions, production L3 (Developer level) support, providing technical solutions, and performing POC for new relevant frameworks available in the market.

Knowledge and experience in the Wealth Management (Private Banking) domain is a good to have. (Portfolio Analysis, Order Management, and Advisory functions).

Job Description:

• Perform Business Analysis, interacting with various business representatives
• Write technical specifications for developments done by technical teams (Unix, Java, TX maps)
• Do Triple A Core object development
• Do Actuate Reports development
• Prepare technical deliveries and support implementation by integration teams.
• Perform functional testing of PMS domain systems (formalization in ALM System)
• Propose solutions and improvements
• Contribute to key and strategic projects
• Contribute to Support Activities
• Perform Project Management activities
• Perform quality reporting and controls in line with the Teams QACMP
• Applications managed by the team: Triple A core objects, Triple A data model, functional asset unicity

Job Requirements:

• Bachelor’s Degree or equivalent experience required
• At least 5 years of experience in the private banking or asset management industry
• At least 5 years of experience in IT Development activities
• Excellent communication skills in English, both oral and written
• Previous exposure on Odyssey's Triple'A system is a must
• Minimum 3 years of experience in Triple’ A Scripting and system setup
• Minimum 3 years of experience in Actuate
• Minimum 2 years of technical experience in Oracle/Sybase, Shell Scripting, Quality Assurance / Project Management process, System Testing
• Knowledge of process methodology
• Experience of business support in a Wealth Management organization
• CFA, PMP, Business Analyst certifications are a plus
• Singapore Citizens are highly preferred

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

The R&D Packaging Engineer will be a part of the newly formed Sustainability Center of Excellence (COE) located in BD Singapore. The Sustainability COE is modeled after the Sustainable Medical Technology Institute (SMTI) and will have the same mandate as the SMTI. In this role, the Packaging Engineer will be responsible for execution of the broader R&D Sustainability strategy at BD. This individual will help integrate sustainability focus into programs for making changes to current products and to new product development programs in all 8 BD businesses. In particular, this individual will support Design for Sustainability efforts within BD’s R&D portfolio. This will require ability on the candidate’s part to work cross-functionally and with different stakeholders across geographies. Some travel may be required.

This is a critical role in the COE and this individual will drive activities focused on assessing and reducing the carbon footprint of BD products. The long-term vision is to have environmental sustainability become an integral part of the product and packaging development process, and the work done by him /her will be instrumental in enabling this outcome. He / she will strike a balance of fast-paced execution with thoroughness of approach, using iterative concept development informed by stakeholder feedback.

The R&D Packaging Engineer supports design, development, and validation of medical device packaging. The successful candidate will contribute to and/or lead a portfolio of packaging projects and ensure that best practices are employed and will have the opportunity to develop as an internal subject matter expert with respect to fundamental packaging materials and design. This includes test method development and alignment to existing and evolving global standards governing packaging.

This position will be accountable for supporting medium to high complexity projects, products, systems, or services within BD. Regular interaction and collaboration with R&D and project team members within each Business Unit is critical for the successful execution of responsibilities.

Job Description

• Work as part of the broader SMTI team to assess environmental impact of BD products, with focus on products in Greater Asia region.
• Work with R&D representatives to obtain feedback, make changes as necessary.
• Demonstrated understanding of translating customer needs into engineering requirements leading to specific packaging, and process specifications
• Collaboration with Manufacturing and cross-functional teams (including Manufacturing Technology, Quality, Marketing, Regulatory, Operations) across businesses to propose; assess the feasibility of; and implement packaging design, material, or process changes, including creative solutions to business or technical needs.
• Synthesize, develop, update, and optimize designs that meet requirements by understanding design space with design options and tradeoffs, managing critical parameters, leverage strong engineering fundamentals and tools and integrating manufacturing principles early in the development.
• Assess manufacturability of new packaging designs, development of packaging processes and changes to existing packaging designs and processes
• Support cost and supply continuity needs through continuous improvement, technology assessment, and innovation.
• Develop and execute packaging test methods that specify measurement equipment, test set-up, measurement systems analysis, and data analysis and align to business and regulatory requirements and needs.
• Write technical reports based on experimental investigations.
• Solve technical challenges drawing on a combination of experience, sound judgment, problem-solving skills, engineering first principles, and advanced engineering methods.
• Comply with all local, state, federal, and BD safety regulations, policies, and procedures.
• Comply with all local BD quality policies, procedures, and practices through consistent application of sound quality assurance principles.

Preferred Requirements

• Bachelor Degree in Mechanical/Packaging or related Engineering field is required.
• Minimum 2-3 years of packaging experience, preferably in medical device or food contact packaging.
• Experience/knowledge with CAD tools for packaging design
• Demonstrated understanding of different packaging solutions available to designers, including flexible and rigid packaging applications, familiarity with packaging materials and their limitations.
• Experience with forming, sealing process and tooling design and development for form/fill/seal, flow-wrap, pouch solutions.
• Experience with fabrication process to ensure manufacturability.
• Basic understanding of statistics and design of experiments.
• Knowledge of the following standards: ISO 13485, ISO 11607, and ISO 14971.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

We are seeking an experienced Senior DevOps Engineer to help automate and streamline our development, deployment, release and production processes at Spark.

Roles and Responsibilities

• Build and set up new development tools and infrastructure, in particular (but not limited to) CI/CD tools and processes
• Work on ways to automate and improve development and deployment/release processes for a large number of clients and components across different data centres
• Work with software developers to ensure that development follows established processes and works as intended
• Develop and maintain tools and processes to ensure the smooth running of production systems
• Improve visibility and response times to production problems

Educational Background and experience

• Degree educated in an Engineering or Computer Science related subject
• At least 5+ years of experience in DevOps or related activities
• Proven track record of building and supporting DevOps platforms for a large-scale enterprise

Required Skills and experiences

• Strong technical background, with hands-on experience in setting up and supporting CI/CD toolset (Gitlab, Maven, Gradle, Jenkins, Artifactory, SonarQube, Jira and Confluence)
• Excellent experience in developing automated deployment of applications and servers using Ansible or related technology
• Excellent knowledge of Linux / UNIX, bash or Perl or scripting skills such as Python, Groovy
• Good knowledge of Dockers, Kubernetes and etc. and experience of applying these to solve development and deployment issues
• Working knowledge of SQL databases, queries and stored procedures
• Passionate about automation and can bring in new ideas on how automation can be used to improve software delivery and client experience
• People leadership and mentoring experience
• Excellent communication, collaboration, reporting, analytical and problem-solving skills