Total 5,982 service engineer job vacancies in sgp singapore singapore 70 tuas west dr

• Daily Update of Project/Operation Progress to immediate superior
• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime
• Attend complete orientation, introduction of superior, JSJD, clear scope of work and necessary drawing or documents on First day of work on site
• Coordinate with client and other Contractors for the project interface activities
• Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met
• Managing project deliverables in line with the project plan
• Managing project scope and change control with commercial or without commercial impact
• Monitor and ensure supervisor plan and instruct and monitor in DWI
• *Monitoring project progress and performance
• Plan monthly works schedule and set productivity to be achieved
• Prepare MSRA
• Prepare Tender Review Checklist Part 1, 2 & 3, ATQ & Notice of Tender Inquiry & Tender submission
• Prepare Vendor/Sub-Contractor Pre-qualification document & check list
• Prepare and update MRMS
• Project Planning, Progress Reports and Claims
• Proposed training for worker on live cable handling
• Providing status reports to the management
• Request and plan min Two days in advance for full PPE (if applicable), schedule of SIC, site location and contact Personal on the first day of work
• Responsible & accountable to ensure compliance with company, regulatory and client's policies and procedures. Ensure local regulations policies and procedures are incorporated into the business unit plan
• Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data
• To fulfill and achieve higher weekly and daily target
• To monitor the progress of projects against planned
• To plan, monitor and ensure manpower, materials, equipment and tools are ready for day to day work activities
• To take on additional appointments from time to time assigned by the company's authorized officer, and carry out the duties of such appointment duly and diligently to enhance the company image and to improve the company's business opportunities
• To verify technical specifications for adequacy
• Update and report daily progress status and look ahead minimum 3days plan
• Working closely with main contractor and client to ensure the project meets the required needs
• Supervising the project at all stages and providing solutions to problems
• Collaborating with site managers, surveyors, engineers, site worker and other professionals

Summary

Oversees the execution and completion of technology solutions projects in the professional services arena. Manages people who lead projects supporting the company-client relationship, ensuring customer satisfaction. Provides budget analysis, labor planning and coordination of activities between client and company personnel. Monitors project completion from initiation through delivery to meet revenue and cost projections. Oversees performance of the installation and client acceptance of capitalized equipment, enterprise software systems or system integration projects or engagements. Typically utilizes management skills more than technical skills. Serves as mediator to internal issues and conflicting priorities for members of cross-functional teams focused on the delivery of new or existing solutions to clients. Selects, develops and evaluates personnel to ensure the efficient operation of the function. This job does not have responsibility over product development, but does have overall project management responsibility. This job oversees employees assigned to manage specific projects that have a distinct beginning and end.

Key accountabilities

• Responsible for orders and revenue growth of OneSource business in Singapore and potentially lead the entire SEA team.
• Manage and develop key accounts and dealers for Singapore and SEA.
• Work closely with OneSource sales to address customers’ needs and provide omni-channel support to get the lab service opportunities in Pharma, research, government and segments.
• Develop and present tailor-made service proposals to customers, particularly for lab asset management projects from key accounts (KAs).
• Be accountable to understand the project objectives, scope, and budget. Ensure the processes and procedures will be applied in required projects and manage potential risk and issues.
• Follow up on project planning, execution and change control and lead project team to implement the service activities on time, on budget and stay committed to the completion of project phases.
• Communicate effectively with customers and internal/external resources. Perform project review with key stakeholders in key customers on regular basis and follow up for issues and solutions.
• Respond to new requests from KAs and expand service scope and new solution for existing lab service projects.
• Coordinate any other related issue in project.

Requirements

• Minimum Diploma holder with specialization in Chemistry or related discipline / Bachelor’s Degree holder preferred.
• Minimum 3-5 years of sales or (project/people) management experience in related industry.
• Good inter-personal, communication, presentation and negotiation skills.
• Team player with assertive and result oriented personality with drive and high energy.
• Customer service oriented and proficient in Microsoft office.
• Strong and confident decision-maker who is capable and has the experience to make tough decision when required for a sales and service organization.
• Capable of building a strong link between the company and awareness of needs of customers.
• Understand need and consider external customers and/or internal clients in decisions and actions.
• Comfortable with 30-70% of business travel inside Singapore.

Responsibilities:

Database Administration

• Act as the Subject Matter Expert for database-related services.
• Manage the daily BAU operation of database-related services.
• Carry out service monitoring, end-to-end performance correlation, and database performance optimization. Create, review and update system documentation and work instructions to enhance the efficiency of daily operations.
• Perform capacity planning to size database resources to meet the demands of application workloads.
• Plan, execute, and monitor backup schedules in accordance with business needs and data retention policies.
• Review database security, perform database hardening, and apply regular or ad-hoc security patches to ensure compliance with IT security policy.
• Coordinate/Support with application support teams to schedule database updates and upgrade databases with minimal business impact.
• Provide Level 2 support for database service-related queries.
• Perform incident escalation in accordance to escalation procedures.
• Coordinate with other functional teams in incident handling, and ensure incidents are resolved or work- around within stipulated SLAs.
• Contribute to or drive root-cause analysis.
• Ensure that all internal processes and procedures are up to date and in accordance with the company's directives.

Data Services Provisioning

• Perform requirement gathering with application support teams.
• Recommend appropriate data services and system capacity according to agreed requirements.
• Develop configuration policies to optimize security, performance, and availability.
• Set up data services according to policies and guidelines.
• Set up data pipelines for data analytics and dashboard initiatives.
• Coordinate with other functional teams to complete the work required to operationalize data services such as IP address assignment, DNS requests, firewall port opening and security scan, database onboarding, data pipeline creation, database monitoring, and database performance monitoring.
• Ongoing review and improvement of process flow, system, and processes through automation, innovation, as well as the adoption of new technologies.

Implementation of IT Initiatives and Solutions

• Provide feedback on the design of data services for new systems.
• Support execution of database services initiatives and business projects.

Requirements:

• A recognized diploma or degree in IT or related fields.
• Minimal 5 years of hands-on experience in systems and database administration in an enterprise or campus environment.
• Hand-on experience in administering MSSQL, Oracle database (10g and above), Oracle high availability technologies such as RAC and Data Guard, database performance tuning and troubleshooting, and database upgrades and migrations tools.
• Hand-on experience in data cleansing, data transformation, and data quality management.
• Hand-on experience in developing dashboards using data visualization tools e.g., Qlik Sense, Power BI and etc.
• Knowledge of MariaDB, MySQL, and PostgreSQL.
• Experience in Windows, and Linux variants, preferably Red Hat and Ubuntu.
• Experience in capacity planning, availability management and business continuity management.
• Experience in project management.
• Independent, highly motivated and a proactive team player who can work with minimal supervision.
• Excellent in written and verbal communication.

The following certifications while not necessary, will be an added advantage:

• Database Administrator Certified Professional for MSSQL/Oracle/MySQL
• ITIL Foundation Level
• Certified Professional in Data Analytics/Data Visualization/Data Virtualization/Machine Learning
• AWS/Azure Certifications

Job Responsibilities

• Manage and implement document control activities
• Audit and assure that manufacturing processes are capable of producing products that conforms to established requirements
• Manage non-conformance issues and implement actions to prevent recurrence
• Follow up on corrective actions to ensure quality issues are addressed and resolved
• Responsible for customers’ quality audits and inspections
• Prepare QA reports
• Ensure products meets customers’ requirements
• Conduct internal audits and enforce ISO Quality Management system within the organization

Requirements:

• Diploma / Degree in Quality Assurance, Mechanical, Electrical/Electronics engineering or equivalent with relevant experience
• Knowledge in ISO 9001, CP/CPK, SPC and 8D reporting will be advantageous
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures.
• Support in the planning of routine maintenance of production equipment.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor junior engineers and technicians in equipment operating concepts and maintenance techniques.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Support Plant EHS and quality initiatives and targets.
• Responsible for developing budgets and long-range plans based on company growth and future maintenance needs.

Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place systems, warehouse in comply with the Site Safety and GMP procedures to ensure good uptime and good MTBF.
• Responsible for support the equipment qualification and validation, such as walkdown, punch list commissioning, IQ/ OQ/ PQ for any new project.
• Responsible for execution of work order and record job performed via MAXIMO system.
• Responsible for writing Job Aids and Maintenance SOP writing, CCA and ER investigation.
• Manage and lead contractor, vendors and service providers to perform maintenance or project works.
• Responsible for Maintenance budge for area of responsibilities
• Lead and Take part in continuous improvement efforts/ projects.
• May act as delegate to the Engineering Manager when required.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor of Engineering in Mechanical, Mechatronic, Aerospace/aeronautical or related discipline
• Min 5 - 7 years of relevant experience, preferably in manufacturing plant
• Prior experience with packaging processes ideal
• Good communication and interpersonal skills
• Good team player and able to multi-tasks
• Able to react effectively to dynamic Manufacturing environment and able to work independently

*Kindly note this position is based in Tuas.

• Develops project objectives by reviewing tender requirements and specifications.
• Determines project responsibilities by identifying project phases and tasks; assigning team members to project tasks; sourcing quotations from suppliers.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes.
• Maintains project budget expenditure by controlling costs and expenses.
• Prepares project status reports by collecting, analysing, and summarising information and trends.

Requirements

• Class 3 driving license
• Diploma or Degree (Engineering)
• 3- 5 years’ experience in managing projects in Commercial Vehicle / Automotive industry
• Able to apply Project Management tools and methodology
• Proficient knowledge in Auto CAD software, Microsoft Office

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Description

We are looking for an Application Engineer who enjoys interacting with customers and likes to work in an autonomous environment. In this position, you will manage and develop long standing client relationships, with an intense focus on exceeding client expectations and driving service delivery. You will have a hands-on approach to service and deliver value through developing and managing technical projects to solve customer problems.

• Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance and continuous improvement plans.
• Assist Sales Representatives with plant surveys of prospective customers.
• Assist Sales Representatives with start-ups of new applications in both existing customers and in new accounts.
• Develop strong relationships with the key stakeholders in the strategic district accounts where you provide service support to other District Sales Representatives.
• Provide technical support to customers; identifying and resolving customer pain points, escalating as required.
• Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels.
• Support services include: Water Chemistry checks, light maintenance, customer service, service report generation, chemical ordering, chemical inventory management and top-up.
• Follow Ecolab safety guidelines and incident reporting requirements.

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player

Responsible for taking orders and serving food and beverages to guests

Polite, friendly and well groom

Verifying the identification and age of any customers order alcoholic beverages

Submitting food orders to the kitchen staff

Ensure customer satisfied with their meal

Work with kitchen staff to resolve any complaints and process customer payments

The role is primarily to support the Binnies Singapore office to secure and deliver the Coastal and Flood Risk projects in Singapore. In addition, the successful individual will require to provide support to UK offices to deliver their Flood, Coastal, and Maritime projects.

It is primarily a technical role involving participation in maritime and coastal related civil engineering projects and studies. The individual will require performing design tasks, various studies, engineering management, client liaising, and communicating with other teams and offices.

The individual may need to work as a coastal specialist working closely with the same discipline and other multidisciplinary teams. This is a great opportunity for the successful candidate to develop his/her technical and engineering management skills, particularly in various types of flood, maritime and coastal projects, and obtain international experience.

The key duties and responsibilities include but are not limited to:

• Design of coastal and coastal related structures
• Undertake various coastal studies
• Perform the projects/tasks within the agreed budget and programme
• Client liaising
• Attending meetings both internal external
• Progress monitoring & reporting
• Proposal preparation

Required Competencies

• CPD in the relevant specialist skill area
• BSc or MEng (Hons) Coastal Engineering
• Specialist knowledge of areas such as metocean studies, feasibility studies, Beach and shore management plan preparation, and detailed design
• Coastal engineering knowledge (tide, current, waves, wave overtopping, rubble mound structures, tidal and storm surge barriers, coast protection works)
• Sound knowledge of BS Maritime & Eurocode codes and industry-standard guidelines such as CIRIA and other relevant international standards and guidelines
• Performing calculations and desktop studies with limited guidance
• Project report writing
• Proposal writing
• Understands support needed by junior staff
• Team player
• Adaptable
• Experience work in multidisciplinary coastal projects
• At least 10 years of experience in planning, design and/or implementation of coastal, marine, reclamatin infrastructure projects
• Experience in project management in the planning, design and/or implementation of coastal, marine, reclamation infrastructure projects is a plus point
• Experience in client liaising and leading technical meetings

Education & training:

• BSc or MEng in Civil and Coastal Engineering
• A registered Professional / Chartered Engineer under the Civil / Coastal Engineering Discipline is a plus point

Background & experience:

• Post-graduation consultancy office experience

Knowledge base:

• Coastal engineering design & studies
• Knowledge of Eurocodes/BS 6349/CIRIA Guidelines

Skills:

• Site assessments
• Design of coastal structures
• Metocean studies and surveys
• Feasibility studies
• Good experience in using design software
• Excellent written and oral communication skills
• Client liaising
• Excellent interpersonal skills

Personal attributes:

• Proven ability to carry out design and other tasks reliably
• Always seeking improvement in design and delivery performance
• Recognises client needs and delivers solutions
• Self-motivated
• Willing to make international travel for both short and long terms assignments with a short notice.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

The CSV Lead Engineer will provide day-to-day Validation activities support in accordance with approved SOPs / Policies for a GMP Biotech manufacturing facility. The role supports Validation activities related to computerized system and is responsible to ensuring their integrity, compliance and efficiency from a Computerized System Validation (CSV) perspective. The CSV Lead Engineer, will serve as site CSV Subject Matter Expert and lead day-today and project CSV activities. The CSV Lead Engineer will provide recommendation for improvements to the validation approach and site operations. The role will also collaborate with other site functions to implement improvements projects.

Key responsibilities:

· Lead or support day-to-day Validation activities in accordance with approved Validation SOPs / Plan / Policies.

· Develop & execute Validation Protocols and Reports, including supporting site discrepancies and deviations investigation / closure.

· Participate in system design review to ensure compliance to user requirements, good engineering practice, validation requirements and regulatory standards.

· Review and approve of Validation Protocols / Reports including site discrepancies and deviations investigation / closure.

· Participate in Site Validation Maintenance Program.

· Develop Validation Plans for a small to medium scale change implementation project and ensure the validation execution activity meets scheduled timelines.

· Coordinate with other Engineering functions, End-User and Quality team to ensure the Validation activities are completed as planned and are compliant to user, Lonza standard and regulatory requirements.

· Review Engineering documents associated with commissioning and validation activities.

· Evaluate and propose improvement to equipment/system, processes and operations to improve safety and process efficiency.

· Review & assess Site Change Controls and Validation CAPAs.

· Participate in Customer / Agency Audits and Inspections as required.

· Participate in on-job training program for Validation staff and provide training to as required.

· Any other tasks as and when assigned by manager.

Key requirements:

· Bachelor Degree / Diploma with exposure in the Biopharmaceutical industry.

· Relevant work experience in Validation / Quality /Manufacturing unit in the pharmaceutical/biotech industry.

· Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, GAMP and ICHQ7).

· Good knowledge and experience of the practical and theoretical requirement of CSV program in a GMP facility.

· Good oral and written communication skills.

· Meticulous and Systematic.

· Team player, with strong focus on safety, quality and timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

JobScope

· Capable to produce P&ID, E/R arrangement, Shafting drawings

· Familiar with IMO, Class rules & regulation and industrial standard.

· Familiar with marine system and equipment

· Experience in marine vessel P&ID system design, equipment sizing and arrangement, propulsion and power generation.

Requirement

· Diploma/Degree in Naval Architecture, Marine Engineering, or relevant courses

· Preferably with 3 to 4 years Mechanical Field related to shipbuilding. Fresh graduate may apply and 6-months OJT will be provided.

· Able to do calculations, develop ship piping system, Engine Room Layouts, HVAC, Shafting, etc

· Advanced level skills in drafting and MS. Office (Excel & PPT)

· Possess good interpersonal and communication skills

· Able to multi-task and able to work in a fast-paced environment

· Applicants without prior experience are also welcomed to apply

*We regret that only shortlisted candidates will be notified.*

Key Responsibilities:

• Managing external electrical subcontractors to ensure that works are in compliance with class, drawings, installation procedures and quality processes.
• Reviewing and proposing to management the most suitable electrical and electronics equipment for newbuild vessels.
• Managing troubleshooting processes and root-cause analyses.
• Checking calculations and drawings for electrical and electronics systems and interfaces.
• Overseeing project documentation and liaising with class, regulators and clients.

Basic Requirements:

• Diploma / Degree in Electrical Engineering.
• Strong, knowledgeable and results-driven leader.
• Minimum 5 years’ experience in a similar capacity, preferably in aluminium high-speed vessels.
• Sailing experience in an engineer’s capacity would be an advantage.
• Working knowledge in programming, automation and PLC would be an advantage.
• Effective communication skills in written and spoken English.
• Proficient in relevant Microsoft Office programs, including Microsoft Project.

Others

• 5.5 days work week
• Two-way company transport provided to and from Boon Lay / Lakeside / Bukit Batok / Jurong East

Your remuneration will commensurate with your experience and qualification.
Your career advancement will depend on your attitude and contributions.
KEEP CALM AND JOIN US!
Interested applicants please forward your detailed resume to
Penguin Shipyard International
21 Tuas Road
Singapore 638489
Email: [email protected]
Only shortlisted candidates will be notified. Thank you.

Job Description

• Carry out works scheduling, material requisition, cost control, site supervision and documentation.
• To supervise the site works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works.
• To perform QA / QC role on area assigned and to ensure safety regulations are being compiled on site.
• Prepare various reports & RA (progress report, project handover report and etc.).
• Any other duties that may be assigned.
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements

• 2 years of relevant experience or fresh University/Poly/ITE graduate
• Mechanical Engineering
• Working location at Tuas

• Scheduling of jobs for drivers and manage drivers to ensure smooth operations
• Point of liaison for drivers and customers / site supervisors
• Taking of clients orders and dispatching / coordinating of jobs
• Handle & manage chinese and english speaking clients as well as logistics teams queries and expections
• Maintain good service and communication with customers
• Attend to customer quiries as the first point of contact via different channels such as phone calls, e-mails, sms and whatsapp
• Record all important customer queries for appropriate post-action review
• Provide administrative support and assist in other assigned ad-hoc matters when necessary
• Team Player and willing to learn attitude
• Able to communicate with Chinese & English Speaking Clients
• Able to handle stress and work efficiently in a fast paced environment. Good in multi tasking.
• Able to work shift work, weekends and public Holiday.
• Willing to travel to Tuas for work

Responsibilities:

• Determine the scope based on requirements, including stating the scope of work, calculating the resources required in delivering the service and advising the senior system engineer preparing the quotation
• Install and configure services as per the approved implementation plan
• Carry out technology, professional and maintenance support services as per scope within the stipulated duration/ timeline
• Provide level 1 support (basic hardware break-fix & troubleshooting of hardware and software issues ) for installed services
• Provide technical deliverables such as high level design document, user acceptance test (UAT) doc and as-built documentation
• Provide outstanding quality of service and meet predefined customer service level agreement (SLAs)
• Undergo technical trainings and obtain technical certifications that are required to meet suppliers’ mandatory technical requirements
• Conduct knowledge transfer training (where required) 

Knowledge, Skills and Experience:

• Minimum 3 years of relevant experience
• Certified in at least one of the technology domain (Infrastructure hardware and software, hyperconvergence, network, security, cloud and/or end user computing)
• Strong technical knowledge on the assigned solution domain/product
• Knowledge of product portfolio in other technology domain is desirable
• Expertise in enterprise products implementation, migration and support.
• Strong interpersonal skills with a customer-centric attitude
• Strong oral and written communication skills
• Strong attention to technical details, priority management and planning skills
• Ability to work independently with little to no supervision
• Results-oriented
• Strong documentation skills

What’s In It For You?

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It’s not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

Don’t meet every single requirement? Apply anyway.

At Tech Data, a TD SYNNEX Company, we’re proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you’re excited about working for our company and believe you’re a good fit for this role, we encourage you to apply. You may be exactly the person we’re looking for!

1) Liaise with Customer for Software requirement and specification.
2) Design the Control & Software Structure, Programming, Testing, implementation and customer support
3) Prepare Machine Operation Manual and Documentation.
4) Work with Project Team for on time delivery of the project.1) Degree in Computer Science / Electrical / Electronic Engineering or equivalent.
2) Minimum 3 years' experience in Software PLC Programming for Omron / Allen Bradley and Siemens PLC.
3) Strong oral and written communication skills. Able to speak & write in English and Chinese in order to liaise with Chinese speaking associates.
4) Must be prepared to travel to jobs sites/overseas.
5) Goal oriented and working directly with clients and other professionals with minimum supervision.
6) Experience in AutoCAD for electrical drawings.
7) Full time position
8) 5.5 days working days

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Clash checking in AVEVA
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting,plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layoutand Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and oyther discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

• 1) Shall ensure the daily operations of various sites assigned and liaise with clients on the requirements
• 2) Arrange for daily staff deployments to various sites and ensure company does not incur any liquidated damages on the projects
• 3) Rostering of monthly schedules
• 4) Coordinate with site in charge on backlog if any
• 5) Rectify on site issues with workers or clients upon receiving feedback
• 6) Reporting of daily attendance to head office and to submit and ensure timesheets are all in proper orders
• 7) Prepare monthly financial reports for various operations projects
• 8) Arrange for coverage in case of absence of staff and able to hands on in event of no coverage
• 9) Candidate must be independent and proactive to provide suggestions and solve problems with initiative
• 10) Candidate shall possess class 3 licence
• 11) Candidate shall respond to any business or projects assignment regardless of time in event of need

Responsibilities:

• Transport waste materials
• Inspect vehicles for mechanical/safety issues and perform preventative maintenance
• Document and log work
• Report defects, accidents or violations

Requirements:

• Have experience as Truck Driver
• Minimum Class 4 driving licence
• No recent driving violations
• 6 days work week
• Location : Tuas

• Plan and carry out preventive maintenance throughout the hotel to ensure that standards are maintained for guest comfort.
• Ensure the smooth daily operation in the department through supervision, delegation of duties and coordinate all engineering activities within the Hotel.
• Ensure the preventive/ corrective maintenance for all the hotel’s facilities are done promptly.
• Conduct routine checks and log data of all facilities, following up on faults and repair works if required.
• Perform property/ room preventive maintenance inspection and update.
• Perform incident investigation and prepares report.
• Assist in fire safety procedures within the Hotel
• Monitor the service and maintenance of all equipment and controls.
• Schedule preventive and corrective maintenance.
• Maintain the tidiness of the store, workshop and check on the tool inventory.
• Ensure that all spare parts are available for use whenever required and proper storage of supplies & materials.
• Maintain fire-fighting facilities and equipment in compliance to the Fire Safety regulation.
• Perform regular energy/ defect analysis and be involved in energy management.
• Keep up to date on safety-related administrative documents.
• Ensure his/her own safety and the safety of others during interventions and those of the external service providers.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by the local Council, Government and Manufacturer specifications.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Strive to honour the Accor Vision and demonstrate active use of Accor Values.
• Any other reasonable request within your range of competence as required by Management.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequential activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritise from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.
• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Assist with the management of internal and external third party interfaces.

Requirements

• Diploma or Degree in Electrical and Instrumentation
• Min 3 to 5 years work experience as Electrical Project Engineer in Oil and Petrochemical Construction Industry
• Experience in project co-ordination with client, engineering and procurement departments
• Experience in co-ordinating with site construction team for installation, testing and commissioning works
• Preferably with overseas experience
• *FRESH GRADUATES ENCOURAGE TO APPLY*

IPS is hiring! We are looking for a talented Senior Project Engineer to join our industry leading Engineering team at our growing office in Singapore.

The Senior Project Engineer will manage deliverables from design team for excellent inter-discipline coordination. Will be responsible for Engineering Deliverables’ overall Quality, Services Cost and Design schedule. The assignments include specific tasks on project teams and the Project/Design Manager should use their education, creativity and expertise to resolve Inter-disciplinary engineering problems and tasks as assigned.

Job Duties and Responsibilities

• Client Coordination - Overall responsibilities, both fiscally and technically, for the project while maintaining customer relations.
• Interdisciplinary Team and Design Coordination - Responsible for overall design deliverables and coordination with interdisciplinary design team.
• Generates/Supports Development of Design Deliverables including Specifications, Data Sheets as well as supporting Design narratives.
• Adheres to Project/ design scopes of work for each project and alerts Client and Management about changes or requests for additional services.
• Generates/Supports Development of Equipment Requisitions & Works’ Packages for bid.
• Generates/Supports Development of techno-Commercial Bid Analysis
• Coordinates Review of vendor submittals and documents
• Coordinate with Client and provides design team with required input
• Sees that satisfactory relationships are maintained with internal and external team - clients, consultants and other project team members.
• Provides site support on projects as required.

Qualifications & Requirements:

• Minimum of 8 years of Process/Mechanical engineering design experience, preferably in the Pharmaceutical, Biotech or Bio-Pharm industry.
• Bachelor’s Degree in Chemical/Mechanical Engineering.
• Proven experience of Interdisciplinary Design Coordination and Client/Internal Team Management.
• General knowledge of Bio-Pharma Process system design and applicable codes in Process/Mechanical engineering.
• Strong Design background and Technical focus
• Has a demonstrated strong time management skills and the ability to manage Design/Engineering deliverables on Bio-Pharma/cGMP Clean Industrial projects,
• Good Verbal and Written Communication and Problem solving Skills are essential
• Pharmaceutical, Biotech or Nutraceutical industry experience is required.
• AutoCAD experience will be an advantage.

Company Overview:

About Us

IPS-Integrated Project Services is a global leader in developing innovative and cost effective solutions for the engineering, construction, commissioning and qualification of complex pharmaceutical and biotech research and manufacturing facilities. With technical expertise spanning R&D to pilot-scale to large-scale production, our team specializes in the technology, trends and regulatory environment to successfully deliver capital projects and improve operations. For over twenty years, we have applied unique LEAN methodologies throughout the project life cycle, continually finding ways to do things better and more efficiently, delivering higher quality and controlling costs. Headquartered in Blue Bell, PA, IPS is a multi-national company with over 900 professionals worldwide and offices in California, Indiana, Kansas, Massachusetts, New Jersey, North Carolina, Pennsylvania, Brazil, Canada, China, Singapore, Switzerland, UK and four locations in India. Visit our website at www.ipsdb.com.