Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To do prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in construction industry
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills

• Position :Customer Service Officer (NO EXP REQ - Freight Forwarding)
• Location : Near Jurong East MRT
• Working hours : 5.25 days work week: Monday- Friday: 9.00am – 6.00pm / Alternate Saturday 9.00am – 1.00pm
• Salary (commensurate with experience) : Up to $3200 basic + Variable Bonus + Medical + Dental (cap at $750 per year)
• Duration : Permanent
• Industry : Freight Forwarding

Main Responsibilities:

• Handle customers’ shipments.
• Co-ordinate & Liaise with vendors between customers and transporters, warehouse etc
• Provide support to sale department
• Liaise with clients n vendors to process and execute jobs
• Documentation and invoicing
• Any ad hoc duties assigned.

Requirements:

• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Diploma in Logistic / relevant discipline is preferred.
• Candidates with 1 to 2 years related experiences may be considered.
• Candidate without experience is welcome as FULL TRAINING provided

Email me at [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Working Location: Woodlands Central
• Monthly Salary: $2390 per month
• Able to commit immediately till end January 2025 (Subject to monthly extension)
• Mon - Fri Office Hours (No work required on weekends and PH)

Responsibilities:

• Assist customers with their enquiries on services of the company
• NO SALES INVOLVED
• Training will be provided

Requirements:

• GCE ”O” Level and above
• Prior Customer Service experience in the service industry will be advantageous
• Proficient in English and a second language so as to converse effectively with different groups of customers
• Excellent team player who is task-orientated
• Possess Good Customer Service Skills

Interested candidates, please forward a copy of your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

SINGAPOREANS ONLY

Working Location: Tampines Central

Working Hours: Monday to Friday 8.30am – 5.30pm

Monthly Salary: $2390 per month

Work Period: Immediate till end January 2025 (subject to further extension based on performance)

No Prior Experience Required

Responsibilities:

• Manage and assist with incoming enquiries from customers
• NO SALES INVOLVED
• TRAINING WILL BE PROVIDED

Requirements:

• GCE O Level and above
• Proficient in English and a second language so as to converse effectively with different groups of customers
• Excellent team player who is task-orientated
• Possess Good Customer Service Skills

Interested candidates, please forward a copy of your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified

SINGAPOREANS ONLY

Responsibilities:

• Patient registration
• Scheduling of appointments
• Limited patient care activities and orientation to patients and their relatives.
• Cashiering duties
• Assist in administration work
• Any ad hoc duties as assigned

Requirements:

• min. NITEC and/or Diploma and above
• Prior healthcare / customer service experience will be advantagous !!
• Excellent interpersonal and communication skills
• Comfortable with working 2-3 shifts

Interested candidates please send your updated resume in MS Word Format to:

[email protected]

Subject: Patient Service Associate

or call 6736 3280 and ask for Kate

EA Personnel: Kate Leau Wei Xuan (R1552331)

Company Registration No.: 99C4599

Job Purpose:

The Sales Engineer is responsible for driving the revenue growth of his / her portfolio within the SEA region for both the advanced materials (coating services) and the industrial equipment business units.

Responsibilities:

• Participate in the formulation and drive execution of the sales and marketing strategy within the SEA region (Singapore, Malaysia, Thailand, Indonesia, Vietnam, Philippine, Indonesia) to deliver sales revenue growth within the 3 years business plan.
• Actively collaborate in collaborative market research into regional markets to identify clear target customers with defined market segments and application groups defined in the strategy.
• Lead and drive strategic sales initiatives for the SEA region, collaborating with the required internal resources to identify and acquire qualified leads and ultimately create new opportunities. These initiatives will include sales campaigns (personal selling, LinkedIn, etc), exhibitions, seminars etc.
• Lead and cultivate strong customer relationships with all key customers and key business opportunities. Engage and develop key stakeholders on the customer side and devise clear plans to drive opportunities through the sales process to win business.
• Opportunity Management: manage all opportunities with a clear roadmap through the sales process, managing where necessary projects with clear objectives, goals, milestones, and timelines to win customer business.
• CRM: Work professionally within the CRM tools / framework to ensure best practices in customer relationship management.
• Solutions & Product knowledge: continuously develop a deep understanding of the markets, applications, solutions, and product portfolio of Nanofilm and its target customers.
• Business responsibility to define with management the most relevant business model / offering to our customers, to balance the strategy of Nanofilm and to meet customer needs to win business.
• Negotiation skills to navigate customer negotiations on all business and contractual topics such as NDA, Sales Contracts, Negotiation commercial terms, etc.
• Reporting, providing regular reports on status, progress, and planning for the S&M activities in the region. Including forecasting, monthly updates, etc.

Requirements:

• Bachelor's in engineering Discipline
• 3- 5 years minimum experience in B2B Materials Technology and related industries
• Aggressive in meeting sales targets and results- driven.
• Confident, independent, target-driven, and goal-oriented with a proactive approach to generating and converting prospects into actual sales.
• Excellent communication skills and competitive sales approach
• High degree of commercial acumen matched with a strong customer-focused approach.
• Knowledge of International business practice and regulation has an added advantage.
• Ability to assimilate and understand technical information regarding vacuum coating technologies and sell on technical capabilities.
• Strong analytical skills to evaluate market opportunities and benchmark competitors technically and commercially.
• The initial work location will be at 28 Ayer Rajah Crescent. The company is scheduled to relocate to the HQ office at 11 Tai Seng Drive in 2025.

Job Descriptions:

o Perform commissioning of Products from system setup to route mapping and product operations testing

o Execute upgrade and modification requests for an existing hardware or system via remote or on-site support

o Train the Product Operators and Service Team in operating a newly setup system, equipping them with product operations and basic troubleshooting skills

o Prepare and submit theUser Acceptance Test, Progress Report, Project Report and other Operations related documents as needed

o Escalate higher level issue to superior for immediate advice and action whenever needed

o Collaborate closely with the Lead Project Engineer to align objectives and achieve team goals

o Assist in attending to any project related issues via remote or on-site support

o Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

Skillsets:

o Diploma or Certificate in Mechanical/Electrical/Computer Engineering or other related fields

o Proven work experience of at least 1 year as a Project Engineer or a similar role

o Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)

o Familiarity in mechanical/electrical hardware installation, setup and troubleshooting

o Familiarity in system/network installation, setup and troubleshooting

o Familiarity in AutoCAD, ElcoCAD and any other design and planning software

o Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage

o Ability to read and interpret mechanical / electrical prints and other related technical documentation

o Strong working knowledge of equipment, tools and components used in the industry

o Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint

o Ability to work independently and remain professional under pressure

o Ability to clearly communicate with colleagues and end users

Additional Requirement:

o Willing to travel locally in a short notice

o Comfortable to work overtime as needed

o Willing to be deployed overseas as needed

Monitor and review master construction program and preparation of catch-up program, if applicable.

· Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

· Preparation of detailed program for the site team to follow accordingly & completed in time.

· Resolve drawing discrepancies & technical difficulties with Technical team.

· Preparation of detailed method statements and work instructions for construction.

· Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.

· Liaise with the Consultants on the submission related to structural works and Technical Department.manpower requirement, and control usage and wastages of all.

· Plan all works on site, including program schedules and construction methods, forecast equipment, material and

· Adherence to safety practices in the work place.

Requirement

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

· Minimum 1 years of experiences in the construction industry.

· Able to work independently with minimal supervision under a tight schedule.

· Meticulous and good communication.

*Applicants please send in your resume in MSWord format to: [email protected] and attn to: Ms Elaine Lee

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects

Here’s the bit about the opportunity.

As a Sales Engineer at Fireblocks in APAC, you will take full ownership and responsibility for your designated projects and clients, from the product sales demonstration up to the preparation of client onboarding. You will be expected to understand the competitive landscape and how other competing solutions and platforms operate, be a gatekeeper to the internal engineering groups, assist with POC setup and testing, give demos on all advanced features related to API, handle tier 1-3 knowledge transfer to customers, coordinate workshops, assist in customer onboarding, handle RFPs and more.

You’ll be

● Working within a supportive APAC-wide Sales Engineering team of highly motivated self-starters

● Supporting the Sales team through the entire client sales cycle from qualification to client onboarding

● Tailoring each demo to match the unique requirements of the customer to show how Fireblocks can support their Digital Asset goals

● Delivering in-depth technical presentations to C-level executives and cybersecurity professionals regularly

● Collaborate internally with Account Managers, Sales Directors and Product Managers

● Translating technical knowledge and terminology to non-technical audiences

● Managing multiple projects and preparing RFx responses simultaneously, each with its bespoke requirement.

You’ll bring:

● Experience in either a pre-sales or consulting position within a Fintech, Crypto or Cybersecurity company

● A high technical acumen with natural curiosity and willingness to dig deep into complex technologies

● Confident & concise communication with excellent presentation skills

● A demonstrable passion for Blockchain and the Crypto industry, whether it be a professional or a personal interest

● An analytical approach that intuitively connects the dots

● A proactive, self-starter mindset with an interest and knowledge of Banking, Financial Services or Fintech

● Enthusiasm when educating customers and colleagues

● The ability to work with Webhooks, REST APIs and perform basic scripting tasks

● Business level Korean proficiency desirable.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Job Summary:

The LTSS engineer is responsible for conducting thorough testing and evaluation of electronic, mechanical, or software components to ensure quality and functionality. This role involves setting up test equipment, performing tests according to established procedures, and documenting results for quality assurance purposes.

Key Responsibilities:

• Set up and calibrate testing equipment for various components.
• Perform routine and specialized testing on prototypes, production units, or returned items.
• Analyze test results, identify discrepancies, and troubleshoot issues.
• Maintain accurate records of test procedures, results, and equipment maintenance.
• Collaborate with engineering teams to provide feedback and recommendations for product improvements.
• Ensure compliance with safety and quality standards during testing processes.
• Assist in the development and documentation of testing procedures and guidelines.
• Provide support for failure analysis and root cause investigations.
• Keep the testing bench organized and maintain equipment in good working order.

Qualifications:

• Diploma in electronics, mechanical engineering, or a related field; or equivalent experience.
• Proficiency in using testing equipment and tools (e.g., oscilloscopes, multimeters).
• Familiarity with testing protocols and procedures.
• Strong analytical and problem-solving skills.
• Attention to detail and ability to follow detailed instructions.
• Good communication skills and ability to work in a team environment.

Preferred Skills:

• Experience in a manufacturing or laboratory environment.
• Knowledge of software testing principles.
• Basic knowledge in automated testing.

Working Conditions:

• May require standing for long periods and lifting equipment.
• Work may be performed in a laboratory or manufacturing setting.

Job Responsibilities:

• Planning and scheduling of projects.
• Manage and lead a team of supervisors, technicians and operation of assigned projects.
• Manage projects and to monitor the projects are carried out with respect to the target schedule.
• To handle design for projects and to ensure clients' requirements are met.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• To forecast and anticipate possible issue for projects and to eliminate potential risks.
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow.
• Planning of manpower and work arrangement with site person in charge.
• To liaise with suppliers on procurement and delivery of materials and equipment.
• Assist in settlement of project final account including variation orders.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Roles & Responsibilities

Job Description & Requirements

Be involved in the planning of civil engineering works.

To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

Any ad-hoc duties as assigned by the Manager.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

The Senior Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Duties & Responsibilities:

· Manage equipment to monitor instrumentation systems

· Responsible for instrumentation installation and network establishment

· Monitor work progress and preparation of necessary reports

· Liaise and coordinate with contractors, clients and co-workers to ensure smooth completion

· To troubleshoot, repair and resolve technical issues pertaining to electrical/ network

· Attend meetings when required

· Any other duties as assigned

Requirements:

· Degree/ Diploma in Civil Engineering or equivalent

· Min. 1 year of experience

· IT/ Software background is an advantageous

· Keen interest in geotechnical instrumentation and relevant experience will be advantageous

· Able to work independently and as a team

· Good communication and interpersonal skills

Position Summary

We are seeking an experienced IT Engineer who is passionate about providing high-quality technical support to our employees in Singapore and globally. This role is critical in providing technical support and for maintaining the hardware and software environment across the company's offices, ensuring that all technology is functioning optimally to support business operations.

Responsibilities

1. Technical Support

• Provide first-level technical support to end-users via MS Teams, email, or in-person, addressing hardware, software, and network-related issues.

2. Troubleshooting & Solutioning

• Provide basic infrastructure or network troubleshooting. Diagnose and resolve technical issues efficiently and escalate complex problems to appropriate teams when necessary.

3. System Maintenance

• Install, configure, and update software applications, desktops, laptops, TV, Meeting Room bookings and peripherals.

4. IT Documentation

• Create and maintain accurate IT documentation, including processes, procedures, and support resolutions.

5. IT Contract & Licences Management

• Review and maintain IT contracts with vendors ensuring proper approval is completed and documented.
• Review all software licences and provide periodic updates & recommendations.
• Plan and provide a table of report on upcoming licences renewals and ensuring the accounts are done correctly and on-time.

6. Asset Management

• Maintain an inventory of IT equipment and ensure accurate asset tracking.

7. Vendor Collaboration and Purchasing of IT assets

• Review need of IT requisition from users and obtain approval from user’s department head and IT head before partnering with vendors to procure hardware and software as needed.
• Procure, manage, and maintain office IT equipment and cabling to meet agreed standards, ensuring they function safely and effectively.

8. Compliance & Audits

• Conduct periodic system audits and ensure IT systems meet security and compliance standards and taking up the lead for IT Audits and second level check by peers or manager.

9. Infrastructure Support

• Assist with office infrastructure setup and maintenance, including firewalls, access points, printers, and workstations.

10. Onboarding/Offboarding:

• Support employee onboarding and offboarding, including configuring accounts and providing user training on IT tools and processes.

11. In addition, the ideal candidate should be

• Be self-reliant and take ownership of their responsibilities.
• Have high ethical standards in the role.
• Possess proficiency in English and able to communicate clearly with stakeholders and IT team.
• Exhibit excellent teamwork skills and adapt to company’s culture and practices.
• Maintain a high standard of work and adhere to service timelines to ensure operational efficiency.
• Identify areas for improvement in the IT support processes and implement changes to enhance service delivery.
• Experienced in using and supporting Microsoft 365, MS Teams and Sharepoint support.
• Ensure good follow-up to case closure.

12. Qualification & Experience

• Diploma or Degree in Computer Science, Information Technology, or a related field.
• Minimum of 3 years of experience in tech support, desktop support, or a similar role.
• Proficiency in Windows, Linux, and Mac OS; familiarity with both PC and Mac hardware and software is essential.

If you are someone that has the skills and interest to take lead, we welcome you to apply for this role.

Responsibilities:

• Coordinate with the consultant and monitor work progress and schedule
• Monitor daily work activities of the various subcontractors to ensure proper adherence to job site safety policies and procedures
• Work closely with the team to fulfil all requirements and expectations during testing and commissioning with consultant
• Ensuring that installation and operations conform to standards and customer requirements
• Estimating material, labor, or construction costs for budget preparation
• Maintaining electrical equipment
• Maintenance & Installation of filtration equipment, including pumps, filters, UV systems and ozone generating equipment.
• Fault diagnosis and servicing of specialist swimming pool chemical dosing systems.

Requirements:

• Electrical qualification or experience preferred
• At least 5 years of experience in related field & local experience
• Able to work independently

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description & Requirements

1. Support in inspection with CMM, i-Vision.

- FA Inspection

- First piece set up inspection

- Routine inspection (in-coming, in-process, out-going)

2. Fixture inspection (New fixture) to ensure acceptable usage.

- Inspection fixture

3. Support in CAPA/Root Cause Analysis for both internal and external quality issue.

- Data collection

- Data analysis

- Root Cause identification

- Solution establishment

4. Generate internal and supplier quality performance report.

- Monitoring of internal production quality issue

- Monitoring of sub-con/supplier quality issue

- Review, analyse and evaluate data on the above quality issue

5. Lead MRB review and disposition.

- Perform review on the rejection, evaluate and disposition of rework, scrap or UAI

6. Participate in supplier evaluation and qualification.

- General supplier management

- Supplier audit (new and existing supplier)

7. Support in audit (internal and supplier).

- Perform auditor role during internal audit

- Auditing of major supplier with high quality issue

8. Lead in internal calibration management.

- Keep track on the calibration due date and take initiative to recall for calibration

- Maintain internal IMTE to date

9. Support on Documentation Control.

- Inspection report

- Material Certificate

- Treatment COC

- Internal inspection record

- Perform GDP

10. Oversee quality activities and action plan.

- Arrangement of inspection priority

- Updating of inspection status

- Liaise with cross function on quality issue

- Problem solving through team work

11. Support QM to lead the Quality Department.

- Perform as a lead of Quality Department

- Take over the HOD role in the absent of QM

Further scope will be added as per necessary prior to changes of needs with reference of current capabilities, knowledge, skill and performance.

12. AS9100, ISO14001 capability.

- Understand all clauses of international standard.

- Execution of these international standard.

- Maintenance of organisation QMSJob Description & Requirements

13. Able to be outstation in Southeast Asia if required

Design /drafting of various Electrical layouts and schematics using solid work electrical software as directed by PD/AE and/or as per the requirement of the assigned job.

· 3D modeling of electrical components, equipment and other related items as per the requirement of project.

· Provide the technical support to site Engineer.

· Creating Draft of Electrical Single Line / Panel Diagram according to customer technical specification.

· Maintain, update and rectify drawings as needed and ensure its accuracy and completeness.

· Respond promptly to inquiries and requests relating to the drawings.

· Helps PD/AE in resolving interferences/clash reports.

Requirements:

· Diploma in Electrical Engineering or equivalent.

· Good working knowledge of mechanical/electrical aspect of generator system and control panels.

· Experience in internal/ Client model review.

· Working experience of drawing software like solidworks electrical and draftsight.

· Able to read and understand site layout drawings and general arrangement drawing of genset.

· Fresh graduates are welcome to apply.

** 0830am -1800pm

** 5-day work weekly

** Two ways of shuttle bus service provided at Jurong East MRT

Only for PR and Singaporean.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR department. We regret that only suitable candidate will be notified.

Role:Network Engineer

JD:

Responsibilities:

Design and Document Preparation
• Provide networking expertise, revise solution architecture drawings and diagrams
• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
• Prepare ITD (Test procedure) document for OPS Network and SMRC Network
• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)
Integration Support:
• The Contractor with support configuration changes to system platforms in factory and customer sites.
• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)
• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)
• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)
• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)
• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)
• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)
• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline
• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:
• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls
• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)
• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.