Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

[Order Number: 528429]

Responsibilities :

• Support IT Infrastructure migration project as Database SME (Oracle) of critical IT infrastructure, ensuring seamless transition and minimal disruption to operations.
• Create and maintain Unix shell scripts for automation and system maintenance tasks.
• Provide technical support and troubleshooting for Elastic Search infrastructure, including data ingestion, indexing, and search performance optimization.
• Develop and maintain Kibana dashboards for report generation and visualization of data insights.
• Collaborate with cross-functional teams to implement machine learning models for data analysis and predictive insights.
• Utilize observability concepts to monitor and improve the performance, reliability, and scalability of Elastic Search clusters.
• Any other ad-hoc duties assigned

Requirements :

• Min 4-6 years’ experience
• Knowledge and experience in supporting database systems – Oracle, MySQL and Postgres.
• Solid Unix knowledge and scripting skills for system administration and automation tasks.
• Familiarity with observability tools and practices for monitoring and optimizing system performance.
• Proven experience in supporting and maintaining Elastic Search infrastructure in a production environment.
• Proficiency in data ingestion techniques and creating visualizations using Kibana.
• Strong understanding of machine learning concepts and their application in data analysis.
• Experience with implementing machine learning algorithms within Elastic Search for data analysis and anomaly detection.
• Familiarity with observability platforms such as Prometheus, Grafana, or similar tools.

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Gary Ho Cheng Xuan
EA Personnel Reg. No.: R1549767
EA Licence No.: 07C5771

To carry out basic design and to check design documentation

To draw up compressor data sheet, process model for refrigeration and/or gas compression system and HEX data sheet.

To manage project management for refrigeraiton and gas compression system

To supervise and co-ordinate at site construction work (includes equipment, piping, insulation and wiring installation for refrigeration system) and on site commissioning work.

To prepare and revise CAD draings.

To provide technical support to sales team and after-service team

RESPONSIBILITIES:

• Provide Technical and engineering support for fire alarm & Aspirating Smoke Detection system
• Carry out maintenance work/Trouble Shooting of the Fire Detection systems
• Design & Supervision on Panel Assembly and internal wiring works
• Project Management & Execution on Site Programming – Ensure On Time Delivery with Quality
• Ability to provide excellent customer service skills

REQUIREMENTS:

• Diploma/Degree in Engineering or equivalent
• Min 1 Yr experience in Fire Detection System however, candidate without experience will be considered as well
• Opportunities for overseas assignments
• Excellent interpersonal & communication skills
• Team player with positive attitude
• Class 3 driving license is an added advantage, not a must

BES Tech Solutions is an authorised distributor providing fire detection solutions to the market. We specialise in Addressable Fire Alarm and Aspirating Smoke Detection System. We are a growing local firm expanding our presence in the market.

• Working Days - 5 / 5.5 days week
• Technician - $2500 - $4000
• Attractive Remuneration with Mid and Year End Performance Bonus

Job requirement:

• Have a minimum of 3 years engineering experience in the areas of valves, control valves and steam applications
• Possess a Diploma/Degree in Engineering
• Ability to communicate effectively (written & verbal) and contribute to the overall team sales
• Possess a strong positive attitude towards customer service excellence
• Conduct technical and/or product training to internal and external customers
• Have own vehicle which will be an advantage

Job Scope and Responsibilities:

1. Support the sales team by identifying the right products to meet customers’ requirements:
   • Develop strong relationships with customers as a trusted advisor to facilitate engineering solutions by visiting customers regularly, providing pre-sales and post sales support.
   • Work with sales teams to interpret customer requirements, deliver solutions and manage customer expectations with the end-goal of sales in mind
   • Work as a consultant to the sales teams and clients to problem-solve and make recommendations during the sales process.

2. Provide engineering solutions to resolve customers’ engineering challenges through troubleshooting

• Offer workable solutions to help solve customers’ problems.
• Participate in technical discussions with the client’s engineering or maintenance teams and address any process or engineering concerns.
• Be able to think critically and suggest improvements that might lead to cost savings or other client benefits.
• Work with our Technical Service Unit to implement engineering solutions for customers.
• Maintain quality service by establishing and enforcing the company’s service standards.

3. Deliver presentation or in-depth training of Company's products/solutions to customers.

• Develop and deliver product demonstrations and sales presentations that explain key technical aspects of solutions that will benefit customers and prospects. Effectively tailor presentations for customers and special events.
• Conduct technical and/or product training for internal and external customers.
• Engage in developing company’s marketing resources when necessary.

4. Source and broaden Company's product range from reliable local/overseas suppliers

• Identify product improvements or new products by remaining current on industry trends, market activities, and competitors.
• Communicate and negotiate with Principals/suppliers to bring the most cost-effective benefits and solutions to customers.
• Act as an intermediary between customers and suppliers to address any technical requirements and clarifications.

5. Be an effective contributor to the project team

• Develop technical solutions in engineering projects from inception to completion.
  • Support the project teams by engaging in technical discussions with customers and suppliers to ensure that project is delivered on time and with budget.
  • Be prepared to offer alternative workable solutions when unforeseen problems surface during the project execution.
  • Ensure all information related to the project is properly documented and stored in company database.

[Order Number: 524710]

Strong in Linux (Centos, Suse) domain

Responsibilities

• Support project by delivering project deliverables and completing project milestones
• Perform installation for hardware and software for turnkey solution
• Prepare and execute SOW
• Coordinate with external parties and customers for problem resolutions
• Participate in System Acceptance Test with external vendors and customers
• Troubleshoot and debug issues that arise
• Develop and maintain technical and configuration documentation
• Documenting and explaining network topologies, diagram and diagram
• Prepare standard documentation Eg. SOW, system handover document, inventory etc
• Any other ad-hoc duties as assigned

Requirements

• Candidate must possess at least a degree in computer science
• Candidate must have at least 3 years of relevant experience

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

EA Personnel Name: Lim Lai Xin

EA Personnel Reg. no.: R2197913

EA License no.: 07C5771

1. Prepare Shop drawing layout and submission list

2. Plan, Design and coordination of cable routing

3. Attend Coordination meeting with Customer

4. Prepare and generate component Library

5. Perform clash report and solving the clasher with Project Engineer/Customer

6. Verify and validate Design with zero clasher and adequate maintenance space

7. Prepare visualization and walk through critical/Congested areas if necessary

8. Maintain records for all Design & Development activities

9. Generate bill of quantity for material require when necessary

10. Update as-built drawing and asset documentation

11. Participate in IMS activities

RESPONSIBILITIES

• Plan, design and administer contract/project of mechanical and electrical engineering works for building services.
• Prepare tender specifications and review tender drawings
• Perform tender evaluations and prepare tender evaluation reports
• Attend technical and progress meetings with client, architects, consultants and contractors
• Manage the projects and identify any non-conformity of contractor’s work at site
• Other adhoc duties as assigned

JOB REQUIREMENT

• Diploma/ Degree in Mechanical or Electrical Engineering or equivalent.
• At least 3 years of relevant industry experience
• Relevant working experience in an M&E Consulting firm is an added advantage.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/ BIM software is an added advantage.
• Able to work as a team, assertive, independent and proactive.
• Must have successfully started Residential, Commercial, Industrial, Institutional & Recreational projects
• Qualified for registration in Professional Engineers Board, Singapore will be an advantage

Responsibilities

• Design, develop, and test electrical systems for company's robotic applications.
• Collaborate with software developers, engineers, technicians and other teams to ensure seamless integration of electrical systems with software and mechanical components.
• Design and implement control systems for robots, including motion control, sensors, safety system and actuators.
• Develop and implement power management systems for robotic applications, including power distribution, battery management, and charging systems.
• Develop safety evaluation, risk assessment, and testing methodology based on international standards.
• Create and maintain technical documentation, including Schematic Design, Cable Harness Drawing, Wiring Diagram, Power Diagram, Bill of Materials, and PCB Layout for assembly and fabrication.
• Ensure compliance with CE, UL, safety standard and relevant regulatory in the development of electrical systems for robotics.
• Support troubleshooting of current AGV in the market.

Requirements

• Minimum Bachelor’s or master’s degree in Electrical / Electronic Engineering or a related field.
• At least 5 years of relevant experience
• Strong knowledge of electrical and electronic systems, including control systems, power management systems, CAN BUS, Serial RS232, Ethernet, UART protocol, sensors, and safety relays.
• Interest in Robotic is a must
• Experience in Drawing Software for electrical & electronic circuits, schematics and PCB Design tools such as E-Plan.
• Hands on experience of crimping, soldering and wiring for power and signal cables.
• Experience with Lithium-Ion battery technology, understand how to maintain and troubleshoot fault for Rechargeable Lithium-Ion batteries.
• Experience with regulatory and safety standards for electrical systems in robotics according to IEC/EN standards.

Working location: Tampines

Working days: Monday to Friday

Working hours: 9am - 6pm

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

• Responsible for testing, operate and maintain automated machinery
• Involve in developing and implementing Logistics System, improvement upgrades, maximize efficiency, control maintenance costs and reduce downtime.
• Prepare project materials, cost analyses, estimate yearly retrofit budget and Spare parts management.
• Train the maintenance staffs for new work methodology, observe teams Safety requirements and provide necessary instructions.
• Maintain the reliability and the performance of the all automation and networks systems in the automation layer.
• Utilize equipment Error logs, Event reports, and analysis data from computerized maintenance systems to track equipment reliability.
• Daily checklists review, records equipment PM Work on internal and external service teams.
• Maintain liaisons with other departments to provide necessary support and assist regular MOM PE inspection.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting with minimum guidance

• Diploma/Degree in Mechatronics, electrical engineering, mechanical engineering or similar field.
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware. Knowledge on Auto CAD, Microsoft PowerPoint and Operation System knowledge will be preferred.
• Experience with automation equipment such as Conveyors, Lifter, ASRS. Food Procession machines and robotics systems.
• Skills on the electrical testing equipment, dB readings, Inverters settings, Calibration.
• A highly motivated, self-starter with the ability to work under pressure and Cold Room environment in order to complete the daily Operation functions. ie, Ensuring 24-7 Up running, fast moving technologies, new concepts, complex systems and operation timescales will influence your day-to-day work.
• Strong time management skills, self-motivated and able to complete Logistics Maintenance projects, repairs or troubleshooting.
• Hand-on troubleshooting expertise and attention to details.
• Strong leadership and problem-solving skills.
• Proven work experience in Industrial Automation System.

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)
• The position would need to be on standby for urgent/ad hoc work outside of working hours due to business needs.

Job description:

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop ( i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide onsite and remote technical support to clients.

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES