You will work in the Environmental Health Institute, and be a key member of the Facility & Safety Management Section, overseeing facility support and safety management across multiple locations (Biopolis,Techplace II and Van Kleef Centre). This role encompasses a wide range of infrastructure and built environment responsibilities, making it ideal for engineers looking to apply their expertise in a dynamic research setting.

This job might be for you if you possess the following qualities:

• Lead strategic planning and coordination for establishing and maintaining specialised laboratories, ensuring alignment with organisational objectives and timelines.
• Develop and manage comprehensive project budgets, oversee financial planning, cost control, and resource allocation for laboratory establishment and maintenance projects.
• Create detailed project plans for laboratory establishment and maintenance, including scope definition, objectives, timelines, and resource requirements.
• Conduct cost-benefit analyses for proposed projects and initiatives, ensuring efficient use of resources and alignment with budgetary constraints.
• Oversee the design, installation, and maintenance of critical infrastructure systems, with a focus on Air Conditioning and Mechanical Ventilation (ACMV), and specialised laboratory equipment.
• Manage building automation systems to enhance facility performance and user comfort.
• Implement and oversee quality assurance processes to ensure specialised laboratories meet stringent quality standards and regulatory requirements.
• Identify potential risks associated with laboratory operations and develop robust mitigation strategies for safe handling of hazardous materials.
• Develop and implement sustainability initiatives across facilities, integrating innovative engineering solutions to optimise building performance and energy efficiency.
• Monitor and report on environmental performance metrics, including energy consumption and waste generation.
• Facilitate effective communication with stakeholders, including researchers, consultants, contractors, equipment suppliers, and regulatory authorities.
• Participate in corporate projects and perform administrative tasks as assigned.

Job Requirements:

• Degree in Mechanical Engineering. Candidates with degrees in other engineering disciplines (e.g., Electrical, Civil, or Environmental Engineering) with relevant experience will also be considered.
• Experience in facility infrastructure management, particularly in specialised laboratory or research environments.
• Expertise in designing and managing ACMV systems, and other critical building systems.
• Strong background in project management, particularly in complex built environments.
• Thorough understanding of regulatory requirements for specialised laboratories, including safety protocols for handling hazardous biological and chemical materials.
• Experience with Government Procurement practices, including green procurement initiatives.
• Proficiency in building management systems and CAD software.
• Strong analytical and problem-solving skills to address complex infrastructure challenges.
• Passion for driving sustainability in scientific research environments.
• Knowledge of green building standards (e.g., Green Mark) and experience implementing energy-efficient solutions.
• Excellent interpersonal and communication skills.

Applicants will be updated on the status of their applications within 4 weeks of the closing date of this job posting.

To apply, please proceed to Careers@Gov at https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-BIOPOLIS-HELIOS/Senior-Engineer-Executive-Engineer--Facility---Safety-Management-Section-_JR-10000034932

Responsibilities:

• Be a member of the Process Engineering Team for top quality servers & storage products, maintain and update end to end production process & value stream mapping, cover end to end production process for better efficiencies thru process optimization, layout/work station enhancement as well as smart factory / automation projects
• Cooperate with the NPI PM team, Test Engineers, Quality, Production, Planning, Logistic and other departments to support production, including audit
• Support NPI ramp with propose new equipment, manage equipment readiness to support LVO, Engineering Change and customer requirement
• Ability to perform first level process issue triage and resolve issues locally where possible, analyze and identify process issue and deficiencies with follow up actions for resolution and improvement to meet goal for cost, quality and delivery.
• Escalate any process issue found to have major impact on quality, process and or cycle time if not able to resolve locally

Skills and Requirements:

• Bachelor’s Degree in Electrical / Electronics Engineering
• 3+ years of relevant work experience is preferred
• Strong IT background, experience with SAP is an advantage
• Technically know-how on Kaizen, 6 Sigma, PFMEA, DOE and/or 8D is a plus
• Experience with server & storage product is an advantage

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

About Mikomiko Pte Ltd:

At Mikomiko, we are at the forefront of AI Technology and AI Solution development and deployment. Our expertise spans across machine learning, deep learning, multi-model learning, transformer, NLP, frontend, backend, cloud and embedded software development, to focus on AI Generated Content (AIGC) generation and beyond. Join us in shaping the future of AI and revolutionizing industries through innovation and advanced technology.

Job Description:

The incumbent attached under AI Software Development will be involved in AI software and Social Media platform development, frontend and backend development, integration and testing for AI product and AI platform, where AIGC, machine learning (ML), deep learning (DL), computer vision, speech processing, NLP, 3D and Computer graphics and their combination might be used.

Job Responsibilities:

As a full-time employee in AI Software Development, you will be responsible to:

· Lead the architecture, design, and development of robust full-stack solutions.

· Collaborate and work closely with product managers, designers, and AI developers to understand project requirements and design UI, develop and test AI system in docker for commercial applications or to improve existing products.

· Provide technical leadership and mentorship to junior developers.

· Assist the team to develop Web/Mobile application with frontend and backend (full stack) and deploy AI system with cloud service in applications

· Participate in code reviews to maintain code quality and ensure best practices are followed.

· Be involved in system integration and operation in DevOpps, with testing and evaluation work

· Continuously research and evaluate new technologies to drive innovation.

· Troubleshoot, debug, and optimise application performance and AI systems.

· Stay ahead of industry trends, continuously researching and evaluating emerging technologies to drive innovation.

Job Requirements:

· Proven experience as a Full Stack Developer, with strong skills on both front-end and back-end technologies.

· Programming skills with experience in GUI design and implementation, frontend and backend development, and cloud/server system design and integration in the use of programming languages such as C/C++, Python, Java, Javascript/Typescript, Swift programming, C#, web related programming; strong proficiency with Database, React, Angular, Vue.js., NextJS, Nodejs, Docker, embedded software development

· Solid understanding of database systems (SQL, NoSQL).

· Extensive use of APIs and strong understanding of HTTP(S) and REST architecture.

· Knowledge of cloud services and deployment (AWS, Azure, Google Cloud, Firebase).

· Familiarity with DevOps practices and CI/CD pipelines.

· Experience with micro-services architecture.

· Familiarity with containerization and orchestration (Docker, Kubernetes).

· Ability to quickly develop expertise in new domains and products, and eagerness to master new challenges.

· Strong communication, collaborative, leadership abilities along with analytical and problem, solving skills

Additional advantages:

· Experience with data stream processing, data platforms at scale and distributed systems i.e. Spark, Kafka, Hadoop.

· AI application and deployment in limited resource with the performance optimization.

Educational Requirements:

· Bachelor’s degree in Computer Science or related field with of 3 - 6 years hands-on programming experience.

Benefits:

· Gain hands-on experience in a leading AI company at the forefront of technological advancements.

· Work closely with a diverse team of experts and professionals in the AI industry.

· Flexible working hours with official annual leaves, medical leaves, insurance provided.

· Potential for performance-based incentives

Job Description:

Responsible for field test of the mobile communication module, capturing bug log, writing test daily reports, sorting and uploading test logs, etc;

Job Requirements:

1. Be familiar with the basic principle of wireless communication and 3GPP protocol;

Experience in GSM, LTE-related wireless network test optimization, vivo or field test of other mobile phone manufacturers, familiar with mobile phone and network-related interactive signalling is preferred.

2. Skillfully use common log capture analysis tools, such as Qualcomm's qxdm, qpst, qcat, etc.

3. Major in computer and communication, college degree or above.

4. Speak fluently English and local language.

5. Legal visa and residence permit.

6. Can do all local operators post-payment card.

7. Work in an office.

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.

Overall Summary:

Senior Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

Key Responsibilities:

Collaborate with cross-functional agile teams to design, develop, and deploy high-quality software applications, encompassing mobile and web frontends, and respective backends.

Champion best-in-class software engineering practices, including pair programming, code reviews, and test-driven development.

Lead technical discussions, architect systems, and mentor team members to foster expertise and excellence.

Requirements:

5+ years of experience as a full-stack developer, with a proven track record of delivering scalable and efficient solutions.

Expertise in modern web development using ReactJS, NextJS, TypeScript, and Kotlin/Java.

Proficiency in designing and implementing CI/CD pipelines and deploying applications on cloud platforms like AWS.

Familiarity with database migration tools and techniques (desired).

Experience working in Agile/Scrum environments (desired).

Excellent communication and interpersonal skills, with the ability to articulate technical concepts effectively.

Self-motivated and proactive, with a strong drive to innovate and improve.

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our CMP Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in CMP Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Diffusion Implant Equipment Department diverse team of talent. You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Implant Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

Position Overview

We are looking for a motivated Developer Relations engineer to work alongside our engineers with our community at Autodesk. This is a unique opportunity for a senior engineer / senior software developer who wishes to gain hands-on experience in a dynamic, high-tech environment and enjoys supporting developer teams. The ideal candidate has solid development experience in Software Delivery domain and additionally likes writing, public speaking, and brings a good-natured and outgoing personality. As a Developer Relation engineer, you will be working on Connected Delivery domain with our engineers, communicate with our developer community through required channels and help them resolve any issues they may have. You will support the community with tutorials, updated documentations, trouble shooting and helpful tips.

What you might like

• A friendly working environment in a professional setting
• Evolving tasks with the option to learn and grow and take over much more responsibilities as fits your skillset and personal goals
• Opportunity to collaborate with the brightest minds in the company and help improve the products and components that you are responsible for
• Adequate salary; hybrid work model; employee stock options as applicable

Responsibilities

• Ensure that our developer community is taken good care of
• Represent Connected Delivery towards the community and the community towards the internal team
• Monitor and respond to community questions in a nice, helpful and swift manner and help update FAQs, threads, documentations etc. accordingly
• Help validate fixed issues and confirm resolution of the same
• Help create and publish tutorials and articles for the community to support them in the best possible way
• Document and analyze the community feedback in a structured way and suggest measures to best serve our community
• Hold training sessions with related community members as applicable

Minimum Qualifications

• Love working with people and enjoy being helpful
• Have a strong engineering background and are a developer at heart
• Have 10+ years of relevant software development experience
• Enjoy and have experience with writing blogs and / or community management and / or teaching
• Have excellent communication skills and enjoy explaining complex technical solutions in a way that most people would understand it
• Have excellent English speaking and writing skills
• are very open-minded and love to learn new things
• Have a calm mindset and are good at context switching
• Have earned a bachelor’s degree or more

Preferred Qualifications

• Have contributed to open-source software
• Have experience working at a startup and / or as a Community Manager and or Developer Relations and / or similar role
• Have completed a Master degree related to Computer Science / Engineering or Business Administration

#LI-PW1

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Minimum of 2 years of relevant experience in semiconductor industry.
• Proficient in both oral and written English.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!