Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking a Quality Assurance Engineer skilled in software testing to join a software firm for FinTech project delivery.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Join a team that utilizes latest technology to promote continuous learning and growth.

Responsibilities:

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive and well-structured test plans and test cases .
• Design, develop and execute automation scripts using automated testing tools
• Perform thorough regression testing when bugs are resolved
• Coordinate with development team/project management team for smooth SIT/UAT.
• Provide support in addressing issues encountered during testing and implementation phases, ensuring swift resolution.
• Champion the incorporation of cutting-edge technologies, methodologies, and tools within Agile software environments.

Job Requirements:

• Singaporean only.
• Bachelor’s Degree in Computer Science, or related fields.
• Minimum of 2 years experience in Software testing (Web/Mobile application).
• Strong proficiency in software Qa methodologies, tools and processes.
• Prior experience in both white box and black box testing will be an added advantage.
• Strong proficiency in automation testing tools and frameworks (Selenium, Tricentis Tosca, Cypress, Postman, LambdaTest, or similar).
• Prior experience in FinTech industry/projects (Blockchain/Capital Markets/Financial Payment) will be an added advantage.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).
This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

The Design for Reliability (DfR) Engineer is responsible for applying engineering and statistical knowledge to prevent or reduce the likelihood of failure of internally developed products. The DfR Engineer uses various methodologies and tools to work closely with those who design, develop, test, manufacture, deliver and support our products and services to achieve operational reliability.

• Guide the project teams in the implementation of reliability engineering methodologies, techniques, standards, procedures and the application of appropriate statistical tools.
• With the project team, set reliability targets for products under development.
• Gather field reliability data, populate the reliability model and identify areas of concern.
• Calculate cumulative effect on final system reliability of individual part reliabilities, identify gaps and determine appropriate actions to achieve customer specified operational reliability.
• Conduct technical risk analysis such as a FMEA to determine specific risk areas. Develop tests to be conducted based as identified by FMEA results.
• Rationalize tests to be conducted to determine sample size, test methods and other details that will produce efficient, statistically valid results.
• Monitor the test program and recommend adjustments as needed to meet reliability targets.
• Participate in technical design reviews and contribute solutions to reliability related issues.
• Coordinate root cause analysis of failed items.
• Compile and communicate lessons learned and ensure prevention of failures by archiving captured knowledge for re-use.
• Monitor and analyze key reliability indicators during product development and after commercialization, and keep management informed.

Experience & Exposures:

• Technology or Manufacturing Center
• Maintainability
• Reliability Engineering

Key Competencies:

• Statisical Methods (Hypothesis Testing, ANOVA, Design of Experiments, etc)
• Reliability Calculations (Survivability, Mean-Time-To-Fail, etc)
• Mechanical System Design
• Testing

Previous Experience and Competencies:

• Bachelor in Mechanical Engineering or in related field.
• Knowledge in Creo parametric is preferred
• Exceptional technical and problem-solving skills. Hands-on is required.

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3500 - $4000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Minimum Bachelor's degree required

Minimum 5 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Job Description

· Responsible for ensuring that assigned projects meets customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practised and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 3 -4 years of relevant work experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope & Responsibilities:

• Responsible for leading Pharma and Biopharma projects using DeltaV System with batch design (CM, EM, Phase, Recipe, etc)
• Responsible for design & managing DeltaV system integrator and ensure they follow company standards and approved guidelines
• Responsible for managing internal stakeholders and coordination with various equipment owners to ensure their requirements are met in the PCS design and is implemented and tested in accordance with the company standards
• Responsible for reviewing functional specifications and design specifications and ensuring these are aligned with project, global and local standards
• Work with various teams to design system architecture, network architecture, cable schedule
• Responsible for reviewing test documents and protocols (FAT, SAT, Interface Test, etc.) so that they meet CSV and QA standards
• Responsible for participating in design meetings at various vendor locations
• Responsible for witnessing FAT’s and interface test at various vendor locations
• Work closely with qualification teams to support qualification test generation and execution efforts in IQ, OQ and PQ
• Support FAT, SAT, IQ, OQ and PQ

Qualifications:

• 10+ years of experience in executing DeltaV Pharma & Biopharma Batch projects
• Extensive knowledge of DeltaV Batch is required
• Understanding of S88 standard is required
• Good understanding of the manufacturing processes
• Good understanding of PLC interfacing with DeltaV
• Experienced in developing automation design philosophies, test plans, protocols and quality reports
• Experienced in developing automation URS, FS, DS from process writeups and tech transfer documents
• Proficiency in written and verbal communication skills (including technical writing and presentations) with ability to communicate and collaborate effectively with other stakeholders

Soft Skills

• Coaching and communication skills
• Good knowledge in coordination of activities
• Must be willing to travel for meetings, and FATs at vendor locations
• Autonomous
• Proactive, self-starter and capable of working alone or in a team environment
• Ability to interpret and operate within defined schedules managing available resources to achieve project milestones
• To be aware and supportive of the project’s requirement for flexibility in working hours/shift patterns through the differing phases of the project’s life cycle
• Experience with Quality Change Control is desirable

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Purpose:

To assist Project Manager in the delivery of Project Investment Plan (PIP) objectives in the following areas:

• Delivering site business benefits through implementation of major capital projects (>£10m). This encompass leading a group of multi-disciplinary professionals from inception of the project to the realization of business benefits.
• Safely delivers the engineered, procured, constructed and commissioned Capital Facilities against agreed Scope and Project Plan to meet the business and project objectives and quality expectations.
• Compliance to local government regulatory requirement
• Managing capital project performance management using GSK Production System (GPS) to drive safety, Quality, Cost and Schedule performance and waste elimination through continuous improvements.
• Compliance to applicable industrial standards and ensuring safety & quality compliance in alignment with GSK Global Supply Chain (GSC) requirement
• Communication and escalation of project progress, key risk and support requirements enabling successful delivery of the project and benefits realization.

Key Responsibilities:

• Lead / coordinate a team of multi-disciplinary and multi-functional professionals including engineers, designers, validation engineers, document controller, external contractors, safety & GMP professional and users to ensure capital projects delivery from inception to benefit realization
• Lead the commissioning and qualification execution as per the Project Plan
• Establishes and facilitates the Risk Management strategy including Risk Register, Assessment, Analysis and Contingency Management for the project and documents it in the Project Plan
• Manage and execute projects in compliance with Safety & Quality standards
• Manage and execute capital project implementation in accordance to the Global Capital Project Control Framework throughout the project life cycle and in accordance with local government legislation
• Support the Design Lead to ensure capital facility that meets user requirements in terms of facility’s operability and maintainability in accordance with User Requirement Specification (URS), GSK standard engineering practices and Global Engineering Standards (mandatory).
• Review recommended vendor selection list and submit to Project Manager for endorsement, as well as the approval of technical blueprints for construction works.
• Support Project Manager in coordination, scheduling and reporting of activities related to stakeholder management and, business change management including project communications
• Support Project Manager in the selection of contractors and suppliers and subsequent discharge of their responsibilities in accordance with the contract/purchase order
• Establishes and maintains Project documentation and records and facilitates handover of final project documentation in accordance with customer requirements.
• Support Project Manager to achieve both LEED and Green Mark certification and defined targets

Skills, Knowledge & Experience:

Professional

• Minimum Degree in any engineering discipline
• Minimum 8 years of working experience as Senior Project Engineer position
• Minimum 5 years of relevant experience in the project management field or in chemical/pharmaceutical industry

Technical

• Knowledge of industrial standards
• Knowledge of cost estimation methodology
• Knowledge of project schedule planning and control
• Knowledge of GMP, GEP and EHS requirements
• Appropriate knowledge of Local Standard Operating Procedures (SOP)
• Knowledge of GSK PM standard, Primary Supply Standard Engineering Practices (PMSEPs) relating to project management and Global Engineering Standards (GESs) relating to project management

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Purpose:

• Support Design Lead in design guidance to project team members in delivering the Front End Project Design up to and including Concept Select in accordance with business and project objectives and quality expectations.
• Accountable for design and construction oversight to ensure design intents are met, review progress and inputs to Consultant and Construction team.

Key Responsibilities:

1. Support Design Lead in the following:

• Manage Project Documentation, from Initiation to Handover, meeting all milestones within the Project Programme to ensure that the project progresses in a timely manner
• Ensure value engineering workshops are carried out at the appropriate times to the project and that there is a ‘value culture’ developed within the design team
• Defines and control drawing standards and requirements from external to ensure compliance to GSK standards (e.g. Business Information Modelling, Computer Aided Design)
• Design input to the preparation and progression of project funding requests in accordance with the prevailing Project Investment Proposal (PIP) process.
• Prepare the Concept Select design package and report.
• Manage the preparation of detailed equipment lists for major plant items and ensures that it is done for all other items, e.g. piping and instrumentation components
• Manages the preparation of initial and ongoing estimates of the engineering hours, and costs, including materials, labor, design, and supervision
• Monitors engineering cost expenditure against estimates and reports cost position to the Project Manager on a regular basis
• Management of internal and external design and technical resources during the Front end stages
• Ensure clean room design, warehouse etc. and other associated regulatory requirements are in place in the overall design.
• Ensure overall GSK standards and required pharmaceutical requirements are integrated in the overall laboratory design.
• Collaborate design, project and construction alignment with muti-function stakeholders and project team to ensure clear communication on design process, intent, milestones and decision.
• Collaborate and manages design to ensure successful decanting construction process for brownfield project.
• Managing procurement packages for project executions.
• Assist in overall coordination with design team, project team, construction management and internal user team to ensure successful completion and handover of the project. This will include initiating and executing internal GSK procedures for overall site execution works as required.
• Managing and involved in site permit during construction works executions.
• Managing execution of IOQ and coordinate with Quality Representative, Construction Manager, and Contractor Representatives and involved in associated records and sign-off.
• Familiarity to local building codes is a must and pharmaceutical requirements will be a plus point.
  

2. Supports the Project Manager in scope development activities and to support Project Management Framework (PMF) requirements

3. Coordinating overall design input to contractors and vendors.

4. Coordinating design input to Constructability, Commissioning & Qualification and Validation.

Skills, Knowledge and Experience:

• 5-10 years’ experience on Architectural, civil & structure related project within biopharma industry and personally involved in several multi-disciplines’ coordination works for both Green field and Brown field projects from scratch to completion.
• Must know how to drive project teams across different departments
• Good knowledge in GMP requirement
• Knowledgeable in permit application, design requirement for QC Lab/process development lab
• Independent worker, proactive and have trouble shooting skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)
• Reports to Principal Welding and NDT Engineer

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

Job description:

The primary responsibility will be to provide technical support for Pavco metal finishing products.

· Stay current with technical aspects of all Pavco products. Keep Up to date for Functional, Decorative Plating as well as other Coatings Group as and when required

· Provide technical support to All Pavco customers in Asia

· Provide routine activity reports to immediate supervisor as required.

· Training to Distributors and Customers

Laboratory Testing and working on Parameters to suit Asia Market

· On line testing in Singapore lab, overseas customers Lab and Pilot Line

· Work with USA Team on Bringing in New Products from Laboratory to On Site Trial.

· Analysis of Customer Bath as and when required.

· Any other Jobs may be given from time to time by your superiors

Travelling is required and on short notice

Electroplating Enviroment may not be clean

Alot of Handon work is required

Installation can take from 2 weeks to more then 1 month Per Trip

Only Singaporeans And PR should apply as we have no quota for Foreigners

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist BD Director in managing program related issues and correspondences
• Coordinate and work with tool and assembly equipment suppliers to ensure smooth program launches
• Design work flows and optimise production layout together with production department to improve machine efficiency
• Source and gather tooling and components quotation from supplier for initial project start up
• Work on new quotation and packaging requirement for new parts requirement
• Support production and quality departments to troubleshoot the processing & quality issues pertaining to plastic parts
• Monitor and track progresses on the program activities
• Provide customer support and response to customer enquiries on time
• Update all tooling activities and bill of materials and project review records
• Follow up and track on engineering changes for each tooling
• Coordinate all mold trials activities
• Design and work with supplier for jig and fixture required for secondary processes
• Prepare periodically tool-life report for customer
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/ Degree in Mechanical Engineering or equivalent
• 3-5 years relevant experience
• Good knowledge of project management & production process
• Good verbal and written communication in English
• Independent, good initiative and able to multitask in fast paced environment
• Experience in handling Healthcare product is an advantage

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Only shortlisted candidates will be notified

Sunningdale Tech is an equal opportunity employer – we believe that a diverse and inclusive workforce will cultivate a vibrant, productive and innovative workplace where all employees are truly respected and valued.

All qualified applicants shall be considered for employment regardless of age, race, gender, gender identity, religion, marital status, medical condition, mental or physical disability, national origin, political and/or third party affiliation or veteran status. All offers of employment shall be conditioned upon successful completion of background checks, valid work passes and medical screenings, as applicable and/or mandated by law, and subject to the applicable local laws and regulations.

World No.1 player in industry is hiring Associate Engineers

Company Introduction

Angel Group owns the world’s largest share for the manufacture of casino playing cards and related equipment. Angel has 70 years of history; started from Japan and now has offices in USA, Singapore, Australia, Macau, Philippines, Mexico and France with a total of over 500 employees in the world. We are the first company in the Jurong Innovative District and this four-storey building is our next regional Headquarters, with an R&D Centre and factory.

Job Description

• Execute production as per production schedule and meet targeted output as set by management.
• Perform initial level of troubleshooting of equipment-related problems to minimise downtime.
• Interact with staff support to ensure smooth and optimum level of machine operational efficiency.
• Establish effective preventive maintenance.
• To control the quality of outputs using advanced technologies.
• To control the flow of various goods and materials through digital quantity monitoring system.
• Mange multiple priorities.
• Other related tasks.

Other information

• Location : West
• Company coach available from Jurong East MRT
• Working Hrs : 8:30AM – 5:30PM Off on Sat & Sun
• Lunch and uniform including safety gear are provided.

We would like to post this advertise for who are well known autocad drawings software as Solid works with HR administrative knowledge, also the person expertise as working before singapore any Marine companies as draftman with administrative rolls as well because our sector purely as ship-building organization so as a person we expedite very dedicative for the company projects and keep on good manners.

Testing Engineer (Monitor) - 3 months renewable to 1 year contract with benefits

Salary: $4000 max

5 days work week

9am - 6pm

Location: Jurong East

Job Scope:

Executing monitor-PC compatibility test by following predefined test cases and communicating

with customer for any test related issues.

Test Lab Preparation (PC/NB set up and FW update）

Summarizing test result and preparing test report

Reporting test progress to Taiwan

Supporting Singapore FAE for related engineering issues including TFT LCD issues

verification with the customers

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

JOB DESCRIPTION

· Responsible for managing the life cycle R&D projects and product delivery by planning, organizing, executing and evaluating from conception to completion.

· Lead project scoping with internal and external stakeholders to establish communication plans, build project schedules and establish clear project deliverables and milestones.

· Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.

· Collaborate and motivate project team members in the design, development, and delivery of R&D solutions to customers.

· Drive design / process validation testing and ensure compliance to project lifecycle governance requirements

· Ability to demonstrate a good level of understanding of technical/engineering processes in managing the project development with the project teams

· Lead, monitor and report the progress of a few projects to all internal and external stakeholders.

· Manage and implement project changes and interventions to achieve project deliverables and mitigate risk.

· Interact with industry members and ensure effective communication throughout the project life cycle

JOB REQUIREMENTS

· Bachelor or Masters in any engineering / project management related discipline

· 2 to 4 years of project management experience in product development or research project would be preferable

· PMP certifications or equivalent will be advantageous

· Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers

· Good interpersonal and communication skills

About Us:

We are a dynamic fintech company leveraging AI to predict market trends and deliver advanced trading technology. Our mission is to democratize access to top-tier trading tools, empowering retail investors to compete with professional traders.

Job Overview:

We are looking for a Data Engineer to join our team in Singapore. This individual will play a pivotal role in ensuring the integrity and quality of data that powers our machine-learning models. Responsibilities include data cleaning, processing, and organization, as well as implementing data governance practices to maintain data accuracy and compliance.

Key Responsibilities:

• Collect, clean, and process raw data from diverse sources for use in our predictive models.
• Develop and maintain databases, data systems, and data pipelines to ensure seamless data flow.
• Implement data validation processes to guarantee data accuracy and reliability.
• Collaborate with data scientists and machine learning engineers to understand data requirements and deliver high-quality datasets.
• Identify and execute data process improvements, such as automating manual tasks and optimizing data delivery.
• Establish and enforce data governance practices to ensure data quality, integrity, and compliance with regulatory standards.
• Implement and maintain robust security measures to protect data confidentiality.

Required Skills/Experience:

• Bachelor's degree in Computer Science, a related quantitative field (e.g., Mathematics, Statistics, Engineering), or equivalent practical experience.
• Extensive experience in data cleaning, preprocessing, and wrangling.
• Proficiency in SQL, Python, and Shell scripting.
• Familiarity with additional programming languages is an advantage.
• Experience managing large datasets and developing data pipelines.
• Strong analytical and problem-solving skills.
• Meticulous attention to detail.
• Excellent communication skills.

Preferred Skills/Experience:

• Experience in financial data analysis or working in a fintech environment.
• Understanding of machine learning concepts and processes.
• Experience with cloud platforms (e.g., AWS, Google Cloud, Azure).
• Experience with relational databases and data lakes.
• Proficiency with Apache Airflow for workflow automation.
• Knowledge of data governance frameworks and best practices.

Perks and Benefits:

• Competitive salary.
• Opportunity to work with a team of experts in AI and finance.
• The chance to contribute to a rapidly growing fintech company.

If you are passionate about data and eager to join an innovative team at the forefront of fintech, we would love to hear from you.