Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering recognised by PEB
• At least 8 years of civil engineering experience, of which 5 years must be of Geotechnical such as tunnels,deep excavation and foundation, including works such as installation of monitoring instruments and collation of monitoring data
• Possessed a valid RE Cert

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job Description:

• To lead the BIM team and monitoring the work progress.
• Prepare project models and construction documents using BIM software.
• Establish project workflows throughout all project phases.
• BIM project set-up and continued project administration.
• To be responsible for clash co-ordination & BIM co-ordination on construction site.
• Prepares and update Revit Model (Co-ordination drawings).
• Prepares 2D and 3D shop drawings and as-built drawings.
• Liaise with Project Document Controller for accurate data transfer.

Job Requirements:

• Possess BIM certificate.
• 5 years' working experience as a BIM Engineer.
• Software knowledge required: Revit Certificated specialist, Navisworks.
• Excellent communication and problem solving skills.
• Experience in adoption of BIM processes in large construction projects from tender to completion of project will be an advantage.

Job Description

Food Engineering and Project Management

• Define, propose, review and implement the investment plan approved by top management which involves engineering & project management and conducting feasibility studies in a cost-effective way for the manufacturing plant.
• Oversee the management of VIE program; looking into the objectives of cost improvement , productivity & process improvements, and submission of investment reports.
• Provide technical support to various projects in the manufacturing plant.
• Support sister companies' industrial projects if needed.

Operation and Production

• Review projects and propose solutions to optimize the actual production lines, by improving efficiency and productivity.
• Work towards improvement of the production data collection and analysis.
• Propose and co-ordinate training programs required for process or project improvements.
• Responsible for selection and management of interns who are joining the operations or production teams.

R&D

• Conduct R&D studies on possible incremental or radical innovations to improve our products, such as the design and installation of a new by-product valorization line.
• Study and develop possible incremental or radical innovations in food engineering, especially in the view of valorizing production by-products.

Job Requirements

• At least 2 years of experience in a similar position.
• Master’s degree in food science and food engineering, with competency in project management.
• Experience in project management, preferably in an industrial setting.
• Experience in food science R&D, from lab scale to industrial scaling.
• Strong understanding of food international and local regulations.
• Exceptional communication skills in English, both written and verbal.
• Proficiency in French is an advantage, enhancing communication with French-speaking stakeholders.
• Outstanding computer skills, in Excel, Design and Drawing tools.
• Strong sense of autonomy and proactivity.

[Job ID: 766396]

Responsibilities

• Execute production as per production schedule and meet targeted output as set by management
• Perform initial level of troubleshooting of equipment-related problems to minimize downtime
• Ensure smooth and optimum level of machine operational efficiency
• To control the quality of outputs using advanced technologies.
• To control the flow of various goods and materials through digital quantity monitoring system
• Mange multiple priorities
• Performing QC activities before the delivery to customers
• Any other ad-hoc tasks assigned

Requirements

• Able to do routine work efficiently
• Physically fit since you will be required to carry heavy pallets
• Non-job hopper
• Able to communicate with other colleagues well

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R2094050
EA Personnel Name: Ayumu Matsuki

[Order Number: 402912]

Required to work on weekends when necessary

Responsibilities

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope
  - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform prepunch list walk thru with PM and Superintendent  Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirements

• Candidate must possess at least a Diploma in echanical/Electrical Engineering or related studies
• Candidate must have at least 3 years of management experience

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Lim Lai Xin
EA Personnel Reg. no.: R2197913
EA License no.: 07C5771

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· Minimum 3 years of relevant working experience in building industry preferred

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

· Good track record in project sales and large tender preparation

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

• Travel Islandwide
• Good Career Growth
• East Region

As a M&E Engineer (Hostile Mitigation), you will be responsible for the following duties:

• Responsible to handle drawing management and control of technical documentation
• Interpret electrical drawing and single line drawings
• Guide the electrical site installation works
• Manage and handle team of electrical workers and assign their installation work
• Executing tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Collaborate with other engineers and technicians involved in the project
• Ensure the quality control of electrical appliances
• Provide electrical engineering support for assigned projects.
• Conduct Corrective Maintenance Activities
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementation of preventative maintenance procedures
• Testing appliances for problems and proposing solutions
• Preparing service & Site Progress Reports
• Preparation of project specific O&M Manuals and asbuilt information’s
• Any other ad-hoc duties assigned by Management

Requirements

• Minimum Diploma in Engineering (Electrical) or equivalent
• At least 2-3 Years of working experience in construction industry
• Knowledge in PLC and Hydraulic System Control will be advantageous

To apply, simply click on the ‘’apply’’ button in the job advertisement or alternatively, you can send in your resume via email: [email protected]

We regret to inform that only shortlisted candidates will be notified.

ALLIED SEARCH PTE. LTD.

EA LICENSE : 19C9777

Be Transformational.

Make your mark. Create an impact.

[What the role is]

At IRAS, we partner you to deliver quality tax services and foster a competitive tax environment for our nation's social and economic growth. By leveraging digital capabilities as part of a future-ready team, your opportunities keep expanding.

We are looking for forward-thinking, energetic and passionate individuals to be part of a new exciting journey! IRAS has always been at the forefront of IT, leveraging the latest technologies to deliver the best experience for our citizens. IRAS is now embarking on a journey to modernise our application systems to ensure that they are scalable, efficient, secure and deliver business capabilities.

We will be leveraging technology like containers, microservices, DevOps and cloud computing to improve agility and to support business transformation. This journey will involve change that cuts across technology, talent and process.

The candidate shall be responsible for eliciting business needs and analysing business problems. He/she will work with agile development teams to perform functionality test and ensure delivery of defined digital solutions.

[What you will be working on]

• Design and consult in the business requirements elicitation and scoping process for different levels of complexity
• Work with project team to validate user stories as part of the Agile delivery cycle, e.g. user stories grooming, sprint planning, daily stand-ups, sprint demo, sprint retrospective, etc.
• Perform functional testing and verification of data migration
• Work with user stakeholders to implement test cases to simulate user requirements with relevant test data
• Automate test cases using tools such as Tricentis Tosca
• Analyse possible test coverage lapses and discrepancies

[What we are looking for]

• Background in any discipline
• Prior experience working on Agile IT projects is preferred

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Job Responsibilities:

· Sell company capabilities to Semiconductors (Front-End) & general industries

· Maintain relationships by frequent visits/contacts and seek new opportunities with existing accounts

· Create new customer accounts

· Handle other aspects of sales/marketing functions including quotations, sales reports and forecasts, market feedback and planning.

· Follow up on billings and invoices

· Review quotations and cost estimates and strategizing to ensure bids are comprehensively estimated and submitted as per client’s tender requirements

· Identify, assess and manage risks relating to the contracts which could impact the bottom line

· Able to travel (SEA regions) when required

Requirements:

· Minimum diploma, preferably Mechanical Engineering background

· At least 3 years relevant experience in Semiconductors Industries

· Strong contact base with Semiconductors Industries

· Handles Mandarin speaking customers

· Self-driven, passionate and motivated to excel expectations

· Good written, verbal communication and interpersonal skills

· Must possess own vehicle

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• 2 years of experience advantageous in pedastrian overhead bridge, road, flyover construction
• Degree in Civil Engineering
• Accredited as a RE with IES

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Scope:

• Provide supervision services for all geotechnical works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the geotechnical team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Monitor contractors' safety performance and participate actively in site safety management
• Conduct roving safety inspections, emergency & incident response and facts finding
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Certificate in Workplace Safety and Health Management in Construction Industry Course (bizSAFE Level 2) or equivalent
• Registered as Workplace safety and health officer with MOM
• Minimum 10 years of experience , of which at least 8 years in major construction works in tunnels and deep excavation and foundation
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Strong leadership skills
• Familiar with all procedures in the Workplace Safety & Health Manual

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering recognised by PEB
• At least 8 years of civil engineering experience, of which 5 years must be of Geotechnical such as tunnels,deep excavation and foundation, including works such as installation of monitoring instruments and collation of monitoring data
• Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

. Job Title -Plumbing Site Engineer

Job Description & Requirements.

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Requirements:·

1. Diploma or Professional Certificate in Engineering (Mechanical) / Construction or equivalent.·

2. Min 1 years experience in similar experience and managing a few sites.·

3. Excellent communication and presentation skills.·

4. Knowledge in project management.·

5. With BCA BCPPF qualifications is an advantage.

6. Knowledge of Plumbing/Sanitary and Gas as an Advantage.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred