Job Description:

• 5+ years of experience in software testing.
• Strong experience in web services testing using SoapUI or Postman.
• Experience in web application testing is required.
• Familiarity with automation testing using Selenium, Cucumber, or QTP is a plus.
• Hands-on experience in testing activities, with a willingness to write and execute test cases on a daily basis.
• Proficiency in at least one test management tool and one defect management tool is required.
• Experience in sanity testing, regression testing, and system integration testing (SIT).
• Knowledge of the Software Testing Life Cycle (STLC) and testing processes is essential.
• Good attitude and strong communication skills are required.
• Willingness to learn and adapt during the ramp-up period; must be able to become hands-on quickly.
• Exposure to Selenium automation development is preferred.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

The Assistant Chief Engineer supports the Director of Engineering in overseeing both the operational and design aspects of the hotels facilities. This role involves utilizing design software like AutoCAD to create and modify technical drawings, support engineering projects and ensure that all designs align with local standards and hotel requirements.

As an Assistant Chief Engineer (Project & Operation) we rely on you to

Project Management

• Assist in Planning & Execution - Collaborate with DOE to plan, implement, and overseeing engineering projects, including renovations, upgrades and new installations
• Prepare project budgets and manage expenditures to ensure that projects are completed within allocated financial resources
• Liaise with contractors and service providers to ensure that project specifications and schedule are met
• Utilize AUTOCAD and other design software to create detailed drawings and schematics for renovations, maintenance projects and new installations
• Assist in conceptualizing and drafting layouts for MEPS and HVAC systems that meet operational requirements and safety standards

Operational Support

• Evaluate equipment and system performance through detailed analysis
• Develop and update preventive maintenance schedules based on design specifications to enhance equipment reliability and lifespan
• Participate in evaluating team performance, providing constructive feedback and conducting regular training sessions to enhance skills
• Assist in developing and implementing emergency response plans related to engineering systems, including fire safety and disaster recovery protocols
• Maintain accurate records of maintenance activities, project progress and inventory of parts and supplies

We are looking for someone who:

• Experience in Project Management, Engineering Operations or a Similar Role Within the Hospitality Industry
• At least 3 years of relevant experience
• Strong leadership and interpersonal skills to effectively motivate and develop a diverse team
• Ability to perform under pressure and adeptly handle last-minute changes or requests

If you are the right person, what are you waiting for? Click the apply button now!

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Position Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualification/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Experience with automation tools: Ansible, Python
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.
• 2 years contract

Responsibilities:

• Perform on-site installation, troubleshooting and debugging of autonomous vehicle (AV) systems and related components.
• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets.
• Assist in routine data collection and documentation optimization or preventive maintenance.
• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet
• Collaborate with cross-functional teams to facilitate coordination between technical tasks and operational requirements.
• Any other additional duties relating to product and operations support.

Requirements:

• An Engineering diploma or degree in Electrical, Electronic, Mechatronics, Robotics, or Automation.
• Hands-on experience in systems deployment, service engineering, technical support, and/or operations coordination.
• Capability to adjust to a shift-based support working environment.
• Experience working in Linux OS environment.
• Practical expertise in electrical and electronic wiring as well as mechanical systems.
• Familiarity with ROS is a plus.
• A Class 3/4 driving license will be an added advantage.

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

We are looking for enthusiastic and confident Sales Engineers who have selling experience in the Singapore market. The role will report to our Director of Sales, Domestic with responsibilities including revenue generation of assigned portfolios. The attributes we are looking for include excellent communication skills, self-motivation contributing towards growth in prospecting, following up on leads; supporting clients and the overall sales organization in selling the full suite of bearings products across industries; and managing the B2B sales pipeline to meet the annual sales quota specifically in the Singapore market.

• Identify sales opportunities and develop new accounts
• Drive sales, monitor, track and take necessary actions to ensure that goals are met
• Maintain and prepare timely sales pipeline information in CRM and related reports
• Achieve monthly sales targets, objectives and track sales performance and metrics
• Preparation of proposals, submit quotations and tenders
• Ensure customer orders are processed accordingly
• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Enhance value-added selling approach
• Provide quality after-sales service to customers
• Experience in selling electronics/mechanical components

The Successful Applicant:

• Preferably with a diploma or degree in Mechanical Engineering or Business Administration with industrial experience
• Minimum 3 years of working experience
• Experience in Engineering or a related field would be an added advantage
• A team player who is meticulous and able to work independently
• Computer literacy (MS Office)
• Salary will commensurate with qualifications and experience

We invite interested and qualified candidates to write in with their updated resumes (in MS Word Format) and their current and expected salary.

We regret that only shortlisted candidates will be notified.

Benefits

• Competitive Salary Package, Mobile & Transport & Allowances
• Healthcare Coverage, Medical & Dental Benefits
• Promotional Opportunities, Career Advancement with Recurring Bonuses

Job Summary:

The HPC Storage Engineer will be responsible for managing the storage infrastructure within HPC environments. This role involves monitoring storage performance and optimizing through tuning and troubleshooting. Successful candidate with demonstrated experience in the HPC storage field may be considered for a Senior position.

Responsibilities:

Storage administration and optimization

• Work with Managed Services teams in managing and administering the storage infrastructure.
• Ensure storage reliability and availability within HPC system.
• Provide support on technical queries and troubleshooting storage-related issues.
• Implement best practices for storage monitoring and reporting.
• Monitor utilization rate, allocation and analyse the report for capacity planning.
• Conduct storage performance test and analysis.
• Collaborate with other teams for enhancement of storage performance and scalability.
• Develop and maintain comprehensive documentation for HPC storage infrastructure and processes.

Data management

• Create and execute a data placement strategy to optimize storage performance.
• Maintain data protection and disaster recovery strategies.
• Implement and maintain security measures to protect data integrity and prevent unauthorized access.

Designing and planning

• Assess future requirements and plan for storage expansion.
• Assist in the designing of future HPC system acquisition.
• Explore and evaluate emerging solutions in HPC storage technology.

Qualifications:

• Degree in a Computer Science, Engineering, IT or other relevant areas.
• At least 3 years of experience in managing storage infrastructure.
• Proficient in UNIX/Linux environments and command line interface (CLI).
• Good knowledge of HPC storage principles.
• Experience in managing parallel file system (Lustre, GPFS, BeeGFS).
• Good knowledge of RDMA-based interconnect (InfiniBand, RoCE).
• Demonstrate ability to analyse complex issues and develop effective solutions.
• To be considered for Senior position, candidates should have at least 5 years of experience in roles that involve the deployment of HPC storage infrastructure, covering key areas such as designing, installing, configuring, documentation and providing admin/user training.

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

Overview:

Join Antina’s dynamic team as a Cybersecurity Project Engineer, where the successfully hired candidate will lead cutting-edge cybersecurity projects and ensure robust security operations. This role offers the perfect blend of technical expertise and project management, providing an exciting opportunity to make a significant impact in the cybersecurity landscape.

The 5G Exploratory Platform (5GEP) will serve as the dedicated testbed for 5G infrastructure. This platform will enable the discovery of vulnerabilities, the testing of network equipment, and to enhance the security and resilience of the 5G ecosystem.

Key Responsibilities:

1. Project Management:

• Lead cybersecurity projects from start to finish, ensuring timely and budget-friendly delivery.
• Develop project plans covering scope, schedule, resources, and risk management.
• Collaborate with vendors and internal teams for seamless project execution.
• Provide regular updates to stakeholders and document all project activities.
• Participate in requirement gathering, testing, training, and implementation phases.
• Meet project SLAs and manage potential risks.

2. Operations:

• Update network configurations, software versions, and procedures.
• Ensure security systems are tested and maintained.
• Assist in obtaining technical support from vendors and track system warranties.
• Implement and manage security measures like firewalls, IAM, SIEM, and SOAR systems.
• Respond to security incidents and provide detailed reports.
• Manage system and user functions, including access rights and maintenance.

Qualifications and Required Skills:

• Bachelor’s degree in Computer Science, IT, Cybersecurity, or related field.
• At least 2 years of project management experience.
• Proven experience in cybersecurity operations and project management.
• Strong knowledge of cybersecurity principles and technologies.
• Proficiency in IT, Networking, VMWare, and security tools.
• Excellent problem-solving and communication skills.
• Relevant certifications (CISSP, CISM, PMP, PCNSA/PCNSE) are a plus.
• Security clearance required.

An ideal candidate would possess the following abilities:

• Project Management: Lead and manage project timelines, coordinate with stakeholders, and implement security solutions.
• Network Infrastructure Management: Understand networking protocols, configure and troubleshoot firewalls, switches, routers, and load balancers.
• System Administration: Manage Windows and Linux operating systems, apply hardening techniques, and respond to breaches.
• SIEM: Customize dashboards, alerts, and reports; tune SIEM rules.
• Firewall Operations: Set up firewall rules and configurations, understand firewall logging and traffic monitoring.
• IAM: Knowledge of IAM principles and tools, implement multifactor authentication and single sign-on.
• Vulnerability Management: Use tools like Nessus or Qualys for vulnerability scanning, understand MITRE ATT&CK framework.

How to apply:

Visit our company website at www.antina.com.sg for more information or send your CV directly to [email protected].

Antina is a company driven by ability, performance, and hard work. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Position Summary:

This is for the Central Patch Management Service under the Systems Technologies which focuses on using BigFix for patch deployment, compliance, and reporting.

Roles And Responsibilities:

• Oversees the entire operation and understands how to use the tools & reports.
• In charge of the BigFix infrastructure, including servers, relays, SQL and updating of the software infrastructure.
• Control access to BigFix components.
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks related to patch management.
• Develops custom reports for stakeholders.
• Setting up content for distribution to endpoints.
• Creates baselines, writes custom fixlets and analysis.
• Develop and maintain groups inside of BigFix.

Requirements / Qualifications:

• Minimum Bachelor's Degree or Professional Degree in Computer Science / Information Technology or equivalent.
• Proficient in BigFix architecture or SCCM
• Minimum 5 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating complex incidents and deep underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities.

Position Overview

Autodesk is looking for a Developer to be part of this team responsible for developing exciting features. You will be working with a group of engineers in a hyper-growth phase with expanded set of features working collaboratively both within and outside their teams. They collectively strive to build best-of-breed solutions for a company with a vision to imagine, design and create a better world. In this hybrid workplace role, you will report to the Senior Engineering Manager.

Responsibilities

• Implement delivery components for CD, with high emphasis on quality and sound software engineering practices
• Participate in software design reviews, conduct code reviews, and provide input and feedback to other members of the development team
• Maintain, improve, and test productivity tools to improve the efficiency for whole team
• Respond quickly to trouble-shootings on installers, builds and licensing

Minimum Qualifications

• BS or above degree in Computer Science related fields
• Good written and oral English
• Good programming and computer science abilities
• Good analytical abilities, and effective communication skills
• Good programming knowledge and practice in Python and C++(C, C#)
• Good script programming skills e.g. JavaScript, shell, batch etc.

Preferred Qualifications

• Cross-platform, Python and C++ coding experience
• Excellent debugging skills in interactive development of Python and C++
• Experience in Android or/and iOS
• Experience in Jenkins pipelines (Groovy scripting, PSL)
• Experience in docker and deployment tools like Kubernetes
• Experience in installer technology e.g. msi, wix or MSIX
• Experience with Windows, Linux (or MacOS) based software development environment.

This is a for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

We are looking for a detail-oriented senior accountant to perform and coordinate accounting duties within our organization. The senior accountant's responsibilities include preparing financial reports, performing account reconciliations, maintaining the general ledger, preparing tax returns, assisting with audit preparations, and performing other accounting duties as assigned.

To be successful as a senior accountant, you should have a solid working knowledge of Generally Accepted Accounting Principles (GAAP) and strong financial analysis skills. An outstanding senior accountant should also possess strong Excel skills, be detail-oriented, highly organized, and able to work with little to no supervision and perform under pressure.

Senior Accountant Responsibilities:

• Coordinating accounting functions and programs.
• Preparing financial analyses and reports.
• Preparing revenue projections and forecasting expenditure.
• Assisting with preparing and monitoring budgets.
• Maintaining and reconciling balance sheet and general ledger accounts.
• Assisting with annual audit preparations.
• Investigating and resolving audit findings, account discrepancies, and issues of noncompliance.
• Preparing federal, state, local, and special tax returns.
• Contributing to the development of new or amended accounting systems, programs, and procedures.
• Performing other accounting duties and supporting junior staff as required or assigned.

Senior Accountant Requirements:

• Bachelor's degree in accounting or finance required.
• 5+ years of accounting experience.
• Working knowledge of tax laws and GAAP.
• Strong financial analysis skills.
• Strong communication skills, both written and verbal.
• Strong organizational and stress management skills.
• Proficiency in Microsoft Office, particularly with Excel.
• Ability to train and manage staff.
• Ability to work with little to no supervision.

We are seeking a versatile senior software manager to develop cutting-edge software solutions to optimize our business operations. In this role, your duties will include supervising junior software developers, analyzing software performance and configuration systems, and managing the deployment and integration of new software. You will also be required to hire new software developers.

To ensure success as a senior software manager, you should possess extensive experience as a senior software manager and a mentor of junior software developers. First-class senior software managers drive software innovation at their companies.

Senior Software Manager Responsibilities:

• Consulting with management and software developers to determine software solution requirements.
• Evaluating software solutions and system performance, as well as supervising the software development team.
• Demonstrating patience and using effective explanations when mentoring junior software developers.
• Managing the development, deployment, and integration of software solutions.
• Determining system specifications and analyzing test stage data prior to software installation.
• Managing the installation and configuration of software solutions.
• Collaborating with front end users on software functionality.
• Resolving software deployment and integration errors, and documenting processes.
• Performing routine maintenance and monitoring performance metrics.
• Keeping abreast of new software technologies, as well as conforming to best practices in cybersecurity.

Senior Software Manager Requirements:

• Bachelor's degree in software engineering, computer science, information systems, information technology, or similar.
• Master's degree in a related field preferred.
• 5 years of experience in software development and team management.
• In-depth knowledge of programming languages such as Python and JavaScript.
• Ability to mentor junior software developers, as well as to collaborate with all stakeholders.
• Extensive experience in developing, deploying, and integrating software solutions.
• Proficiency in documenting processes and monitoring performance metrics.
• Knowledge of best practices related to data encryption and cybersecurity.
• Ability to keep up with software industry trends and innovation.
• Exceptional interpersonal and communication skills.

At NUS Singapore, our people are the driving force behind our success. We pride ourselves on fostering a vibrant and inclusive community of talented individuals from diverse backgrounds.

When you join NUS, you become part of a community of passionate individuals who are dedicated to driving innovation and change in education, research, and service. Our culture of inclusivity and entrepreneurship means that you’ll have the freedom to explore your ideas and make a meaningful impact. Your career at NUS is more than just a job - it’s a transformative experience that will shape your personal and professional growth.

Explore the link provided to learn additional details about the available job opportunity:

https://career44.sapsf.com/sfcareer/jobreqcareer?jobId=1832&company=nationalunP2

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Responsibilities:

1、Responsible for the research and development of wireless communication system, positioning system, radar system, motor control system, baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Exposure to IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.

Job scope

As a Senior RF application engineer, you will be responsible for developing/testing the evaluation board and product board for RF SoC targeting at UWB and BLE applications. Your responsibilities will include collaborating closely with chip designers to understand the chip function and testing requirement, and optimize the performance of the solution at a system level. Additionally, you will provide direct support to end customers in integrating the chip into their products.

Key responsibilities:

1. Develop and test EVBs for RF SoC targeting at UWB and BLE application

2. Develop and test product board including RF SoC, flash, power supply, filter, antenna, etc.

3. Conduct test and work with certification bodies for FCC, CE, CCC certification

4. Provide support to end customer for chip integration

Key Knowledge Requirements:

1. Familiar with typical power supply circuit e.g. DCDC, LDO, and the design principles of power integrity and isolation

2. Understanding of signal integrity for high-speed digital signals

3. Knowledge of transmission line impedance, matching, filter, EMC/EMI, antenna

4. Familiar with the requirement and testing of FCC, CE, CCC certification

5. Proficiency in PCB design software PADS/Altium Designer/Allegro for schematic design, PCB design, BOM generation

6. Experience with RF testing equipment including spectrum analyser, signal generator, oscilloscope, network analyser

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Manufacturing Engineering, Supplier Quality

Reports to: Senior Molding Engineering Manager

Function: Global Research & Development

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible for the plastic injection tooling and molding project management of new product developments, transferred projects, capacity expansion, as well as continuous improvement for production tooling.

Duties and Responsibilities

> Plan and manage molding engineering budget

> Support all molding engineering related projects

> Lead projects related to quality, yield, process efficiency, and capacity improvement

> Lead end-of-life issues pertaining to product materials and components

> Lead qualifications of 2nd source of materials or equipment for business continuity

In New Product Development Support,

> To be accountable as project leader for tooling development from prototype until mass production stage. Tasks are included but not limited to below aspects:

• Manage the tooling project to ensure project timeline, capital investment and tooling performance target are consistently met
• Review and provide valuable input to Design For Manufacturing (DFM) documents from mold maker, and to assist R&D product designers to optimize product design from tooling scalability and best molding production cost perspective
• Analyze and understand product design, generate mold specification and acceptance criteria, conduct mold design review
• Oversee mold, equipment, process testing and debugging, conduct testing result review and drive mold performance improvement
• Document and transfer tooling knowledge from 1 cav prototype to multi cav mass production tooling
• Molding supplier factory molding validation IQ/OQ/PQ review

> Collaborate with in-house manufacturing and quality team to qualify new tooling. The tooling are for injector parts, IOL optical PP mold, and process aids for material production

> Compile tooling and molding related documentation in accordance to the regulatory requirements, and maintain the quality of molded components

> Initiate the Change Control submission and review, conduct Risk Assessment, draft and get Validation Plan, Validation Protocol/Report reviewed and approved based on the project master plan

In Sustaining Engineering

• Monitor and evaluate production tooling performance at vendor sites and lead the project to develop new tooling for capacity expansion and replacement/renewal
• Trouble shoot IOL and injector defects potentially related with injection molding production which occurs in the vendor’s manufacturing site (Japan, Singapore, Malaysia, etc.), drive solutions with data analysis and fact-based approach
• Be involved in sourcing of alternative vendor of plastic tooling and molding production for long term business sustainability

Requirements

Experience

• At least 3 years of technical experience in medical device/pharmaceutical industry
• Understand IQ/OQ/PQ validation requirement in accordance with IS013485 standard
• Able to write, review and coach validation protocol and report
• Track record of successful tooling and molding project management, tool makers and molding suppliers handling experience in the region
• At least 3 years of hands on experience in tooling design and Design For Manufacturing (DFM) for product and tooling design
• Solid molding process knowledge is required, and with at least 3 years of Scientific Molding practitioner

Skills/Accreditations

• Preferably Lean 6 sigma green belt trained, understand DMAIC approach, Failure Mode Effect Analysis (FMEA), Gauge R&R and Design of Experiment for trouble shooting and process improvement
• Strong technical writing skills
• Quick learner with logical thinking, good communication skills in English, customer focused, ability to drive results
• Able to read and speak Japanese is a plus

Academic Qualifications

• Bachelor‘s degree in mechanical or chemical engineering field related to plastic injection molding, or diploma in Engineering with more than 3 years experience in project management of customized mold design

Travel requirements

• 10 – 25%

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Job Description:

• Administer project planning and project execution;
• Ensure all project activities are peformed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Coordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Maintain close liaison and communication with field operations team;
• Ensure all company reports and documentation are completed accurately and on time;
• Perform any other related duties as and when assigned by Manager.

Job Requirements:

• Diploma/Degree in Mechanical Engineer or related Engineering field;
• Min. 3 years of related field experience;
• Knowledge of Autocard will be advantageous;
• Dynamic and good team player;
• Able to travel overseas as and when required.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Responsibilities:

1. Engage in firmware/software development for communication systems, positioning systems, bioradar systems, and related products.

2. Engage in V-model development, which includes requirement analysis, high-level design, low-level design, implementation, unit testing, integration testing, and system testing.

Requirements (Firmware):

1. Bachelor’s degree or above, majoring in computer engineering, electronic engineering, communication, automation, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management and low-level driver development. Capabilities to build the toolchain with Python would be advantageous.

3. Experience with embedded operating systems such as RTOS would be appreciated. Knowledge of pre-emption, IRQ, and embedded communication protocols such as I2C, UART, and SPI is mandatory.

4. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

5. Preferred experience includes ARM Cortex-M series hosted microcontrollers. Candidates with solid experience in ESP32, Raspberry Pi, Arduino, STM32, or similar platforms will have an advantage.

6. Competency in using debugging equipment such as oscilloscopes, logic analysers, and FW debuggers is mandatory.

Requirements (Software):

1. Bachelor’s degree or above, majoring in computing, software engineering, computer science, applied mathematics, or other relevant fields.

2. Solid experience in C and C++ in the context of memory management (static, stack, heap) and GUI. Candidates with hands-on experience in creating Windows based application with IMGUI will have an advantage. Capabilities to build the toolchain with Python would be mandatory.

3. Candidates with experience in building applications that facilitate TCP/IP, UDP, etc., will have an added advantage. Knowledge and proficiency in data structures management are essential, including sorting algorithms, linked lists, stacks, queues, trees, and hash tables.

4. Knowledge or hands-on experience with multithreading concepts such as IPC, MUTEX, Time Slicing, and Pre-emption will provide a significant advantage.

5. Experience with wireless communication technologies like UWB, BLE, WiFi, NFC, etc., is advantageous. Candidates with expertise in MAC and Link Layer will have an added advantage.

6. Experience with software pipeline automation tools such as Jenkins is appreciated.