About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

• Minimum 5 years of experience in PowerApps
• Experience in development of Microsoft Power Platform, Power Apps
• Excellent UI design skill and designing and developing entities in PowerApps.
• Providing Business Solutions using PowerApps & Power automate with .NET & SQL/Dataverse
• Assisting in user acceptance test, troubleshooting and end-user support
• Documentation on technical specification and user guide
• Provide end-user trainings
• Good interpersonal and communication skills

About Visa: Visa is a global leader in payment technology, connecting consumers, businesses, financial institutions, and governments to fast, secure, and reliable electronic payments.

Team Overview: 

Join our dynamic Developer Experience organization under Operations and Infrastructure. Our team is responsible for handling developer tools and the developer platform, ensuring a seamless experience for developers. We develop, maintain, and support business-critical applications that drive Visa's daily operations for developers. Currently, we are on a multi-year journey to modernize our business systems by adopting open software technologies and moving towards cloud.

Role Overview: We are seeking an experienced Staff Software Engineer to join our “Strategic Initiatives” team. The successful candidate will play a pivotal role in building the next-generation global payment network, contributing to Visa's transformation.

Primary Responsibilities:

System Design and Development:

• Design, document, and implement new systems, enhancements, and modifications to existing software, ensuring alignment with design specifications, security standards, and Java best practices.

• Develop highly scalable, fault-tolerant web-based applications.

Stakeholder Interaction:

• Engage with both business and technical stakeholders to deliver high-quality products and services that meet business requirements using the latest tools and technologies.

• Present technical solutions, capabilities, and considerations in business terms.

Code Quality and Delivery:

• Deliver zero-defect code and ensure the team's deliverables meet or exceed business expectations.

• Contribute to and evolve a highly efficient development process pipeline by leveraging best-in-class CI/CD tools.

Innovation and Best Practices:

• Identify opportunities for product innovation and improvements to best practices, standards, and processes.

Mentorship and Collaboration:

• Mentor junior developers to ensure the timely delivery of high-quality code.

• Collaborate with Technical Product Managers to break down solutions into smaller achievable tasks.

Documentation and Support:

• Develop backend databases and queries, create and consume APIs, and handle front-end UI development.

• Manage backend operations and batch jobs to maintain data integrity.

• Support test engineers and operations teams in troubleshooting, defect research, and issue root cause analysis.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Location : Jurong East

Responsibilities

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Involve in project activities and coordinate with stakeholders such as suppliers and customers for the project implementation

Requirements

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years relevant working experience
• Experience in Infocomm Technology such as RedHat Linux, Virtual Environment, Network Security is preferred

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

We are hiring Marine Engineer and we welcome new graduate to join us.

We are looking for someone who has:

• Bachelor’s Degree in Marine Engineering, Electrical Engineering or equivalent.
• Only Singaporean / PR needs to apply.

Competencies you will bring:

• Proficient with engineering software; AutoCAD.
• Proficient with Microsoft Word, PowerPoint, and Excel.
• Ability to work independently as well as in team.
• Good oral and written communication skills in English language.
• Motivated to facilitate and contribute to the company’s growth.

Roles and Responsibilities

• Responsible for efficient delivery of AutoCAD drawings, reports, and other deliverables as required by the directors.
• Provide engineering and project management support for assigned projects.
• Provide document control and ensure document handling. Update and revise documents / folders as required.
• Contribute to a positive and professional working environment.
• Perform other related tasks that may be required from time to time.

As an equal opportunities’ employer, we offer a competitive remuneration and generous benefits package, commensurate with qualifications and experience.

If you are keen to take up this rare opportunity and challenge, please send in your CV to [email protected].

Connect with us on LinkedIn.

Website: www.m3marine.com.sg

About the Role

As a Platform Engineer (Oracle Tuxedo Developer), your role is to design, develop, and maintain distributed applications using the Oracle Tuxedo middleware platform.

Job Description:

• Designing and developing distributed applications using the Oracle Tuxedo middleware platform.
• Writing efficient, scalable, and reliable code in programming languages such as C, C++, Java, or COBOL to implement application logic.
• Configuring and managing the Oracle Tuxedo environment, including setting up application servers, managing resources, and optimizing performance.
• Collaborating with cross-functional teams, including business analysts, system administrators, and database administrators, to gather requirements, design application architecture, and ensure seamless integration.
• Developing and maintaining documentation for applications, including code comments, technical specifications, and system configurations.
• Performing unit testing, debugging, and troubleshooting to ensure the applications meet functional and performance requirements.
• Conducting performance tuning and optimization of Oracle Tuxedo applications.
• Keeping up to date with the latest Oracle Tuxedo platform updates, technologies, and best practices in distributed application development.
• Providing technical support and guidance to other team members and stakeholders.
• Participating in code reviews and ensuring adherence to coding standards and software development best practices.

Qualifications:

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Proven experience in developing distributed applications using Oracle Tuxedo middleware platform.
• Strong proficiency in programming languages such as C, C++, Java, or COBOL.
• Experience in writing unix shell scripts.
• Familiarity with middleware concepts, distributed computing, and service-oriented architecture (SOA).
• Experience in performance tuning and optimization of Oracle Tuxedo applications.
• Knowledge of database systems and SQL.
• Excellent problem-solving and debugging skills.
• Strong communication and teamwork skills.
• Ability to work independently and manage multiple priorities in a dynamic, deadline-driven environment.

Infrastructure Engineer

Job Description:

• Operate, manage, and maintain VMWare ESX and HCI technologies

• Knowledge of administering Windows Server 2016, SQL 2016 and Windows Clustering technology

• Red Hat administration

• Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations

• Create, manage, and maintain documentation related to the managed systems and operation

• Perform hardening benchmarks adhering to defined procedure and checklist. Maintain the infrastructure in such a way that it is secure against unauthorized access.

• Deploy and deliver the project deliverables as stated in the project scopes extracted from the proposal/contract.

• Update the Infrastructure team lead on the project progress and status.

• Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.

• Build, configure, and rollout new releases through Release Management Process on system components that affect operations. Organize training for new releases where necessary.

• Identify, isolate, resolve, escalate and close incident/problem ticket according to ITSM Incident/Problem Management Process.

• Ensure backup and recovery of system components is carried out, so that critical services can continue in the event of a disaster.

• Perform daily system health check

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

• At least 3 year(s) of working experience in the related field is required for this position would be advantageous.

• Preferably possess certifications such as Microsoft MCITP, VMWare certified professional or equivalent

• Full-Time position(s) available.

xSQUARE is a Singapore based startup founded in 2018 as a subsidiary of the Goldbell Group. xSQUARE is optimizing and reshaping the warehousing scene by developing a suite of proprietary autonomous technologies for automated warehouse systems including AGVs, Command & Control, supply chain optimization. We are developing the best and smartest automation and robotic technologies for our customers.

Responsibilities

• Manage daily operation activities in workshop & customer services and traffic teams
• Ensure accountability and integrity operational readiness of workshop and traffic teams
• Develop all necessary policies and procedures to ensure the workshop & traffic operation are effectively maintained to ensure maximum efficiency
• Ensure staff are appropriately trained and motivated to carry out their responsibility to the required standards
• Deal openly and promptly with any problems and effectively identify and manage risk as appropriate
• Constantly review and streamline workflow and working conditions in order to achieve labour turnover and efficient operation
• To ensure all works are carried out in accordance with the safety and housekeeping requirements set by the company
• Provide the point of escalation for team for any operational issues
• Preparation of reports on performance, budget and expenditure
• Plan and achieve financial budget and key performance indicators
• Ad hoc duties as assigned by Supervisors

Requirements

• Academic qualification: Diploma in Engineering & equivalent.
• Competent in English (verbal & written) & spoken Mandarin (to liaise with Mandarin speaking stakeholders/technicians/clients)
• Competent in corporate presentation
• Possess strong analytical & technical knowledge
• Prior working experience in managing daily workshop for at least 2 years
• Valid Class 3 Driving License

Job Responsibilities:

• Solicits new customer/products, existing customer’s recommendation and other sources which provide regular updates on construction projects
• Review M&E (Electrical) tender documents and drawing
• Material takes off, prepare bill of quantities and cost estimation
• Prepare technical data quotation and proposal to clients
• Attend to site visits/offices for contract negotiation
• Collects and collates background and ongoing project information of new customers to better facilitate credit approval
• Analyzes reports which helps to increases sales revenue and achieve profitability
• Other ad-hoc activities assigned by superior

Education Required:

• Diploma/Degree in Quantity Surveying, Electrical Engineering

Experience Required:

• Min 2 years in Electrical sector
• Working experience as Electrical QS is preferred
• Proficiency in MS Office & Auto CAD

Competencies and Skills Required:

• Communication skills – Good listening skill, English speaking and in writing.
• Possess good negotiating skills, analytical and research skills
• Good knowledge of materials and construction at site;
• Possess good inter-personnel skill to interact with all levels
• Pay attention to drawing details & requirements.
• Tactfulness with self-confidence.

· Carry out testing, integration, and commissioning of an array of instrumentation and control systems for commercial projects.

· Design control panels and subpanels and generating I/O lists.

· Develop process functional and software designs specifications including control write-up and control schematics.

· Carry out development, engineering and testing of DCS/ DDC/ PLC/ SCADA software.

· Interface design, implementation and testing between various third-party communication protocols.

· Development of hardware and software design specifications and other software/ test documentation.

· Carry out diagnosis and resolution of electrical, instrumentation and control systems issues.

· Ensuring on time completion of commissioning activities.

· Site Testing and Commissioning with clients.

· To liaise with multiple stakeholders of each project, internal (procurement, other disciplines etc) or external (consultants, clients, sub-contractors etc) in ensuring timely completion of tasks.

EXPERIENCE

· Experience in Industrial and process automation, and/or building ACMV systems for built environment projects. Fresh Graduates are welcome to apply.

· Experience in building management systems will be advantageous.

QUALIFICATION

· Diploma in Electrical Electronic Engineering

1. Report to Project Manager

2. To assist in site supervision works and

3. Coordinate internally with inter-department and externally with clients & consultants

4. Coordinating for the project planning, documentation and execution of works on site in timely manner.

5. Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering.

6. Planning with manpower resources is mandatory.

7. Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required

8. Coordinate for all submissions

9. Produce weekly site progress report and necessary submissions

10. Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

· Checking plans, drawings and quantities for accuracy of calculations:

· Ensuring that all materials used and work performed are as per specifications:

· Liaising with contractors, supervisors, quantity surveyors and the general workforce involved in the project:

· Day-to-day management of the site, including supervising and monitoring the site labour force:

· Planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines.

· Overseeing quality control, health and safety matters on site.

· Preparing VO and other reports as required.

· Other related duties, as assigned

Job Requirements:

- Diploma / Degree , related in Construction
- At least 1 year related working experience in Building Construction

- Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers.

- Willingness to learn & committed to accomplish datelines

• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.
• Perform internal quality system audit.
• Optimize automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipment's are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings.
• Perform additional tasks given by the management.

Job Requirements:

• Diploma with 2-3 years of relevant experience.
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA.
• Require to perform shift work (Morning & Afternoon shift).

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description & Requirements

Successful candidate will assist Project Manager on the following tasks:

• Site & project management and daily operations, routine/adhoc service work for industrial water treatment systems.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Site co-ordination, monitoring and report work progress.
• Liaising, negotiating and managing sub-suppliers/sub-contractors in the region with respect to procurements and in-situ execution of sales contracts or projects.
• Assist Project Manager to coordinate and communicate with end-user customers, local and regional suppliers for the production of deliverables as per contractual specifications and schedules.
• Compiling and handing over operation and maintenance (O&M) manuals to our end-user customers
• Any other duties given by Project Manager to support on projects.

Skills and Experience:

• Degree/Diploma in Chemical, Environmental or Mechanical Engineering.
• Preferably with 3-5 years of related experience in project management, project engineering, operations for industrial water treatment systems.
• Ability to read and understand specification, fabrication, erection, and standard engineering drawings.
• A team player that is willing to work with different age groups and nationalities.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Responsibilities:

• General encapsulation and optimization of the underlying framework; ensure the stability and efficiency of the underlying framework SDK, making it cross-platform and optimized for specific platforms.
• Transformation of algorithm application achievements; conversion of deep learning-related algorithm achievements, including detection, classification, segmentation, and other algorithms implemented based on the deep learning underlying SDK.
• Responsible for the creation and optimization of engineering algorithm strategies; design and implementation of engineering algorithm strategies for industry businesses based on the algorithm SDK; optimize engineering algorithm strategies for different application scenarios.

Minimum Qualifications:

• Bachelor's degree or above in computer science, electronics, or related fields.
• Proficiency in C/C++ development, solid programming skills, familiarity with common data structures and algorithms, object-oriented programming, and common architecture and design patterns.

Preferred Qualifications:

• Master's degree or equivalent experience in industry with in computer science, electronics, or related fields.
• Preference for those familiar with GPU programming, RTOS (NuttX, RT-Thread) and deep learning-related knowledge, image processing algorithms.
• Those with Android or iOS development experience are preferred.

Essential Skills:

• Excellent networking and interpersonal skills.
• Problem-solving, and analytical thinking.
• Highly organized, diligent with great attention to detail.
• Active listener, able to interpret and playback stakeholder requirements.
• Highly driven and able to work individually and as part of a team.

We regret to inform you that only shortlisted candidates will be contacted.

View more jobs : www.blueboxjobs.com

As a Field Engineer (C&S), you will be responsible for monitoring construction / maintenance activities. The incumbent should take steps to ensure that construction progresses as scheduled and that work specification are followed. Daily, the incumbent must inspect the construction site and coordinate delivery schedules with contractors.

You are also expected to perform the following:
• Maintenance of all Civil and Structural plant assets, including drainage systems and oil traps, insulation & cladding, coating, furnace refractory, etc. to ensure high plant availability and equipment integrity.
• Undertake all Civil and Structure maintenance activities related to Corrective and Preventive Actions and Management of Change (MOC) activities related to the Production Unit
• Assure that supervisors and inspectors adhere to the approved Inspection and Test Plans and project quality plans when conducting witness, inspection, and surveillance checks. Ensure Quality Control tests and checks are properly recorded and conform to project specifications, AFC drawings, and method statements.
• Ensure accuracy of approved construction drawings, documents and procedures for proper and correct construction execution.
• Provides good documentation to ensure all Civil and Structure drawings can be updated to reflect the latest changes.
• Ensure compliance to HSE standards and requirements to ensure that the Bukom Petrochemical Complex is a safe place to work in.
• Confirm day-to-day civil maintenance work and co-ordinate work details with contractors where appropriate.
• When required, to attend daily planning sessions with operations and confirm the schedule and procedures for safe and efficient execution of the job.
• Work with TA / SD (Plant Turn around / Shut down) leads & Planners to effectively integrate work scope into overall execution strategies in a TA / SD event.
• Execute the civil maintenance works using contractors.
• Assist Maintenance Manager in managing shutdowns and project works.
• Carry out any other related duties as required.
• Perform the role of an Authorized Permit Applicant and/or Authorized Engineer as per site Permit to Work (e-PTW) requirement.

Requirement:
• Degree/Diploma in Civil Engineering or equivalent.
• Min. 3 to 5 years civil engineering experience in construction or maintenance in oil and gas, chemical / petrochemical or related industries will be an advantage.
• Knowledge in local authority requirements e.g. the Building Construction Authority (BCA), Ministry of Manpower (MOM), etc.
• Knowledge or familiarity with Coating / Painting (NACE qualified), Insulation & Cladding and Refractory works will be an advantage.
• SAP (GSAP) knowledge in Maintenance Module will be an advantage.
• Experience in field work relating to interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Brown field experience and demonstrated ability to coordinate and interact with the run-and-maintain organization
• Ability to use business software, including Excel, PowerPoint, Word, PDF writer with proficiency in pivot tables and data interpretation.

Job Description

We are seeking a talented and experienced DevOps Engineer to join our dynamic tech team. In this role, you will be instrumental in designing, implementing, and maintaining the infrastructure that supports our rapidly evolving platform. You will collaborate closely with our development, QA, and product teams to streamline deployment processes, enhance system performance, and ensure the scalability and reliability of our services.

Key Responsibilities:

• Design, implement, and manage scalable, secure, and reliable infrastructure on AWS EC2.
• Utilize Docker, Kubernetes, and EKS for containerization and orchestration of microservices.
• Develop and maintain CI/CD pipelines using GitLab and ArgoCD to automate the build, test, and deployment processes.
• Integrate QA tooling into CI/CD pipelines, including Cypress for E2E testing.

Configuration and Automation:

• Implement Infrastructure as Code (IaC) using Terraform for efficient resource provisioning.
• Manage configuration management using Ansible to automate system configurations and deployments.

Networking and Security:

• Configure and manage load balancers using Traefik to ensure optimal traffic distribution.
• Implement service mesh technologies like LinkerD to manage service-to-service communication securely.
• Ensure infrastructure security and compliance with industry best practices.

Monitoring and Logging:

• Set up and maintain monitoring and alerting systems using tools like CloudWatch, Prometheus, Grafana, and Splunk.
• Proactively identify and resolve system issues to maintain high availability and performance.

Collaboration and Support:

• Work closely with development and QA teams to understand application requirements and ensure seamless integration.
• Provide support for development and staging environments, facilitating efficient testing and deployment cycles.

Optimization and Cost Management:

• Analyze system performance metrics to optimize infrastructure for cost and efficiency.
• Implement strategies for resource optimization without compromising on performance.

Requirements

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Minimum of 3 years of experience in a DevOps or similar role.
• Proven experience with AWS services, particularly EC2, RDS, and networking components.
• Strong expertise in containerization using Docker and orchestration with Kubernetes.
• Past experience as a software developer is highly advantageous.
• Proficiency in setting up CI/CD pipelines using GitLab and ArgoCD.
• Hands-on experience with Infrastructure as Code tools like Terraform.
• Familiarity with configuration management tools such as Ansible.
• Knowledge of load balancing with Traefik and service mesh implementations using LinkerD.
• Experience with logging and monitoring tools, specifically Splunk.
• Scripting skills in Bash, Python, or Go for automation tasks.
• Understanding of microservices architecture and RESTful APIs.
• Familiarity with our tech stack is a plus: TypeScript, Go, ReactJS, ExpressJS,
• Gin-gonic, GraphQL with JWT authentication.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a fast-paced, agile environment.
• Detail-oriented with a focus on delivering high-quality work.

Preferred Qualifications:

• Certifications such as AWS Certified DevOps Engineer, Certified Kubernetes Administrator (CKA), or similar.
• Knowledge of Redis, MySQL, PostgreSQL, and Elasticsearch.
• Experience with QA tools integration, including Cypress and Pact.js.

JD

Responsibilities:

• Develop, implement, and maintain AI models and algorithms, including Generative AI models, to

enhance product capabilities and automate processes.

• Collaborate with cross-functional teams to understand business requirements and translate them into

technical solutions using Generative AI technologies where applicable.

• Integrate Generative AI solutions with existing products and platforms to deliver seamless functionality

and performance.

• Optimize AI models for efficiency, scalability, and cost-effectiveness, with a focus on the efficient

deployment of Generative AI tools.

• Monitor and evaluate the performance of AI solutions, including Generative AI models, making

adjustments and improvements as needed.

• Stay updated with the latest advancements in AI, Generative AI, and machine learning, applying new

techniques and technologies as appropriate.

• Document processes, methodologies, and findings to support knowledge sharing within the team, with

special attention to the usage of Generative AI tools.

• Collaborate on the integration of Generative AI models into existing IT Service Management (ITSM)

platforms to enhance automation and service efficiency.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Proven experience as an AI Engineer or similar role with a track record of deploying AI solutions,
including Generative AI models, in production.
• Strong programming skills in languages such as Python, Java, or C++.
• Proficiency with machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with data preprocessing, feature engineering, and model evaluation.
• Familiarity with cloud platforms and services (e.g., AWS, Azure, Google Cloud) and their AI/ML tools,
especially AWS Bedrock.
• Strong problem-solving skills and the ability to work independently and collaboratively in a fast-paced
environment.
• Excellent communication skills, both written and verbal, with the ability to explain complex technical
concepts to non-technical stakeholders.
• Experience with Generative AI, NLP, and transformer-based models.
• Knowledge of the Langchain technology stack and AWS Bedrock for Generative AI solutions.
• Familiarity with IT Service Management (ITSM) tools and processes, with the ability to integrate AIdriven automation

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.